Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fast Timing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A parametrically programmable delay line for microwave photons

Delay lines that store quantum information are crucial for advancing quantum repeaters and hardware efficient quantum computers. Traditionally, they are realized as extended systems that support wave propagation but provide limited control over the propagating fields. Here, we introduce a parametrically addressed delay line for microwave photons that provides a high level of control over the stored pulses. By parametrically driving a three-wave mixing circuit element that is weakly hybridized with an ensemble of resonators, we engineer a spectral response that simulates that of a physical delay line, while providing fast control over the delay line’s properties. We demonstrate this novel degree of control by choosing which photon echo to emit, translating pulses in time, and even swapping two pulses, all with pulse energies on the order of a single photon. We also measure the noise added from our parametric interactions and find it is much less than one photon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Stability-Constrained Learning for Frequency Regulation in Power Grids With Variable Inertia

The increasing penetration of converter-based renewable generation has resulted in faster frequency dynamics, and low and variable inertia. As a result, there is a need for frequency control methods that are able to stabilize a disturbance in the power system at timescales comparable to the fast converter dynamics. This paper proposes a combined linear and neural network controller for inverter-based primary frequency control that is stable at time-varying levels of inertia. We model the time-variance in inertia via a switched affine hybrid system model. We derive stability certificates for the proposed controller via a quadratic candidate Lyapunov function. We test the proposed control on a 12-bus 3-area test network, and compare its performance with a base case linear controller, optimized linear controller, and finite-horizon Linear Quadratic Regulator (LQR). Our proposed controller achieves faster mean settling time and over 50% reduction in average control cost across 100 inertia scenarios compared to the optimized linear controller. Unlike LQR which requires complete knowledge of the inertia trajectories and system dynamics over the entire control time horizon, our proposed controller is real-time tractable, and achieves comparable performance to LQR.

data-driven control↗
DOE OSTI2026

Non-Invasive Electrode Impedance Estimation for Optimized Charge Profile Parameterization of Lithium-Ion Batteries

This work presents a non-invasive method for parameterizing a physically motivated equivalent circuit model of lithium-ion batteries using operando electrochemical impedance spectroscopy and time-domain data. The proposed model consists exclusively of linear circuit elements, enabling computationally efficient simulation and real-time implementation on battery management system chips. By integrating frequency- and time-domain measurements, the model accurately estimates internal states such as the negative electrode potential, achieving a root mean square error of 12.3 mV during fast charging validation. Parameterization requires only rate tests with sinusoidal perturbations at three different ambient temperatures, making the approach experimentally accessible. The model reveals key insights into battery behavior, including rate-dependent overpotentials primarily governed by charge transfer kinetics at the positive electrode, and temperature-dependent impedance contributions from both charge transfer and solid-state diffusion processes. Validation using reference electrodes confirms the model’s ability to detect lithium plating onset and reproduce impedance behavior across a wide range of operating conditions. The approach enables in situ optimization of fast charging profiles and lays the foundation for future extensions incorporating aging effects and plating dynamics.

25 ENERGY STORAGE↗
DOE OSTI2026

Demonstration and performance of an online data selection algorithm for liquid argon time projection chambers using MicroBooNE

The MicroBooNE detector is a liquid argon time projection chamber (LArTPC) that produces three-dimensional images of particle interactions using ionization charge collected by anode wire plane arrays and scintillation light collected by a light detection system. In addition to testing long-standing experimental neutrino anomalies and performing measurements of neutrino interactions with argon nuclei using the Fermilab Booster Neutrino Beam, MicroBooNE aims to develop methodologies for rare beyond the Standard Model and off-beam physics searches. Looking ahead to the upcoming Deep Underground Neutrino Experiment (DUNE), with MicroBooNE serving as a valuable testbed, achieving high sensitivity and livetime for off-beam physics while satisfying data processing and storage constraints will require data-driven, intelligent, and online or real-time data selection techniques. These techniques are essential for reducing data rates and preserving rare signals with high accuracy. In this paper, we describe a fast data selection algorithm suitable for online execution to identify electrons from stopping cosmic ray muons in the MicroBooNE detector utilizing ionization charge information, and present its performance. This represents the first demonstration of online data selection in a LArTPC using real data and charge information exclusively and provides an important proof-of-principle for applying such techniques to other LArTPC experiments such as the Short-Baseline Near Detector and DUNE.

Abratenko, P. [Tufts U. (main)]↗
DOE OSTI2025

TorchBraid: High-Performance Layer-Parallel Training of Deep Neural Networks with MPI and GPU Acceleration

TorchBraid is a high-performance implementation of layer-parallel training for deep neural networks (DNNs) supporting MPI-based parallelism and GPU acceleration. Layer-parallel training has been developed to overcome the serialization inherent in forward and backward propagation of DNNs that limits utilization of computational resources in the strong scaling limit. To achieve this, TorchBraid integrates the PyTorch neural network framework with the state-of-the-art XBraid time-parallel library. Furthermore, this article presents the use and performance of TorchBraid, in addition to solutions for overcoming the algorithmic challenges inherent in combining automatic differentiation with layer-parallel. Results are presented with and without GPU acceleration for the Tiny ImageNet and MNIST image classification data sets, as well as recurrent neural networks. Overall, TorchBraid enables fast training of DNNs, both in a strong and weak scaling context. In addition to the TorchBraid software, several new advances in applying layer-parallel algorithms are detailed. Integration of layer-parallel with data-parallel algorithms is presented for the first time, showing the computational advantages of the combination. Standard deep learning techniques, like batch-normalization, are developed for layer-parallel training. Finally, a new approach combining layer-parallel with spatial coarsening in order to accelerate training for 3D image classification shows roughly a 10× speedup over serial execution.

Layer-parallel↗
DOE OSTI2024

Real‐Time Observation of Slowed Charge Density Wave Dynamics in Thinned 1T‐TaS 2

Abstract Transient electrical pulsing is used to investigate the slowed charge density wave (CDW) kinetics of 1T‐TaS 2 . These measurements distinguish a fast response of the material, consistent with the onset of self‐heating, from much slower transients that occur on timescales orders of magnitude longer than this. The latter variations appear consistent with slow configurational changes in the CDW, which, due to the thin nature of the 1T‐TaS 2 , can be distinguished from the much faster dynamics of Joule heating. Experiments in which the cooling of the material is interrupted, demonstrate the possibility of “programming” it in different, strongly nonequilibrium, CDW phases. Collectively, the results point to the existence of a complex free‐energy space for the thinned material, whose multi‐valley structure and hidden metastable states govern the resulting thermal and field‐driven dynamics. Crucially, this work demonstrates that while the CDW dynamics in this material may have a thermal character, the timescales associated with these motions can be very different from those on which self‐heating occurs. This discovery will be important for efforts to implement active devices that utilize the CDW states of thinned 1T‐TaS 2 .

Yin, Shenchu↗
DOE OSTI2025

Fast and Accurate Pixel Calibration of Tof Neutron Diffractometers with Machine Learning

At a spallation neutron source, neutron pulses of varying energies are generated, and the detection of neutrons by instrument detectors is recorded as time-of-flight from the emission of the neutron pulse to its arrival at specific detector pixels with high time resolution. The flight path of neutrons from the moderator to the sample and then to the detector must be precisely calibrated at the detector-pixel level using standard powders, so the neutron events from all pixels can be time-focused to produce high-resolution diffraction patterns. Modern time-of-flight neutron diffractometers at spallation neutron sources are equipped with two-dimensional detectors with millimeter-scale pixelations. The number of pixels in a diffraction instrument can reach millions, which makes a single-pixel-level calibration process time-consuming or even impossible with conventional refinement or fitting approaches. Here we present a machine-learning-aided calibration process using a train-and-predict approach, in which machine learning models are trained on the relationship between an individual pixel time-of-flight diffraction pattern and its diffraction constant. These models use a portion of the available pixels for training, and a good model then predicts the diffraction constants precisely and rapidly for large sets of pixel diffraction patterns.

detector pixel calibration↗
DOE OSTI2025

Fast growth and high-titer bioproduction from renewable formate via metal-dependent formate dehydrogenase in Escherichia coli

Microbial bioproduction using one-carbon (C1) feedstocks has the potential to decarbonize the manufacturing of materials, fuels, and chemicals. Formate is a promising C1 feedstock, and the realization of industrial, formatotrophic platform organisms is a key goal for C1-based bioproduction. So far, a major limitation for synthetic formatotrophy has been slow energy supply due to slow formate dehydrogenase activity. Here, we implement a fast, metal-dependent formate dehydrogenase complex in a synthetic formatotrophic Escherichia coli utilizing the reductive glycine pathway. After a short-term evolution, we demonstrate formatotrophic growth of E. coli with a doubling time of less than 4.5 h, comparable to the fastest natural formatotrophs. To further explore the potential of a formate-based bioeconomy, this strain is engineered to produce mevalonate, as well as the terpenoid and aviation fuel precursor isoprenol, using formate we generate directly from the electrochemical reduction of CO2. This work demonstrates an improvement in bioproduct titer from formate, achieving the production of 3.8 g/L of mevalonate. Additionally, the abundant and recalcitrant polymer lignin is chemically decomposed into a formate-rich mixture of small organic acids and subsequently bioconverted into mevalonate. Overall, the described fast-growing, formatotrophic bioproduction strain demonstrates that a sustainable formate bioeconomy is within reach.

Cowan, Aidan E↗
DOE OSTI2024

Ultrafast Exciton Dynamics of CH 3 NH 3 PbBr 3 Perovskite Nanoclusters

Exciton dynamics of perovskite nanoclusters has been investigated for the first time using femtosecond transient absorption (TA) and time-resolved photoluminescence (TRPL) spectroscopy. The TA results show two photoinduced absorption signals at 420 and 461 nm and a photoinduced bleach (PB) signal at 448 nm. The analysis of the PB recovery kinetic decay and kinetic model uncovered multiple processes contributing to electron-hole recombination. The fast component (~8 ps) is attributed to vibrational relaxation within the initial excited state, and the medium component (~60 ps) is attributed to shallow carrier trapping. The slow component is attributed to deep carrier trapping from the initial conduction band edge (~666 ps) and the shallow trap state (~40 ps). The TRPL reveals longer time dynamics, with modeled lifetimes of 6.6 and 93 ns attributed to recombination through the deep trap state and direct band edge recombination, respectively. In conclusion, the significant role of exciton trapping processes in the dynamics indicates that these highly confined nanoclusters have defect-rich surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Multi‐Species Energy‐Banded Ions in the Ionosphere During the 21 January 2005 Magnetic Storm: Low‐Altitude Edge of the Warm Plasma Cloak

During the 21–22 January 2005 magnetic storm, the FAST satellite observed warm (< few keV) ions in discrete energy bands on the dayside at ∼3,000 km altitude for more than 6.5 hr. We suggest that the ionospheric energy-banded ions represent the low-altitude edge of the warm plasma cloak observed simultaneously by magnetospheric satellites. This is a clear example of the multi-species ion energy bands (10 eV to several keV) observed during strong magnetic storms by the FAST satellite, stretching from the diffuse auroral region to the plasmapause with lifetimes up to 12 hr. The close association of these energy-banded ions with magnetic storms, their broad latitudinal extent, and the presence of multiple ion species in the same energy band, rather than at the same velocity, indicate that this is a distinct phenomenon from other types of energy-banded ions. During the 21–22 January 2005 magnetic storm, the dayside ion energy band structures, centered at 10 eV (H + ), 40 eV (H + and He + ), and 160 eV (H + , He + , and O + ), were consistent with a “time-of-flight and velocity filter” formation process acting on a near-cusp, impulsive outflow of a <200 eV multi-species ion-source population, poleward and in the same hemisphere as FAST. Understanding the sources and dynamics of warm energy-banded ions and their linkage to the warm plasma cloak is important because during superstorms these ions are transported to L values as low as L ∼ 1.2 in the dawn sector, significantly altering the energetics of the mid-latitude ionosphere.

58 GEOSCIENCES↗
DOE OSTI2024

Automated Immunoprecipitation Workflow for Comprehensive Acetylome Analysis

Immunoprecipitation is one of the most effective methods for enrichment of lysine-acetylated peptides for comprehensive acetylome analysis using mass spectrometry. Manual acetyl peptide enrichment method using non-conjugated antibodies and agarose beads has been developed and applied in various studies. However, it is time consuming, and can introduce contaminants and variability that leads to potential sample loss and decreased sensitivity and robustness of the analysis. Here we describe a fast, automated enrichment protocol that enables reproducible and comprehensive acetylome analysis using a magnetic bead-based immunoprecipitation reagent.

Lysine acetylation, Acetylome, Acetyl peptide enri↗
DOE OSTI2026

A parametric study of slow dynamic nonlinear elasticity with comparisons to models

Several phenomenological models that aspire to quantitative description of anomalous nonlinear mesoscopic elasticity are reviewed and compared with laboratory measurements. This class of nonlinearity, best known perhaps for slow dynamics and aging, is seen widely in imperfectly consolidated granular solids but is not well understood. Typical slow dynamic tests show that a modest conditioning oscillatory "pump" strain depresses material stiffness, which then recovers like the logarithm of time after conditioning ceases. Several phenomenological models based on physical arguments have been proposed that predict the material stiffness response to arbitrary pump strain histories during conditioning and recovery. Approximate closed form and numerical solutions to the models are presented that predict the quantitative influence of three key pump parameters: the pump's strain amplitude, the pump's strain rate, and the pump’s duration. Laboratory measurements on Berea sandstone, concrete and a confined single aluminum bead find that slow dynamic responses are linear in pump strain and independent of pump frequency. Measurements also show that, after pump-off, stiffness recovers over times far longer than the pump duration. These observations and others are compared to model predictions. One of the considered models, based on a picture of fast brittle damage and slow healing, successfully matches all these behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Efficient Capture and Release of the Rare-Earth Element Neodymium in Aqueous Solution by Recyclable Covalent Organic Frameworks

Rare-earth elements (REEs) are present in a broad range of critical materials. The development of solid adsorbents for REE capture could enable the cost-effective recycling of REE-containing magnets and electronics. In this context, covalent organic frameworks (COFs) are promising candidates for REE adsorption due to their exceptionally high surface area. Despite having attractive physical properties, COFs are heavily underutilized for REE capture applications due to their limited lifecycle in aqueous acidic environments, as well as synthetic challenges associated with the incorporation of ligands suitable for REE capture. Here, in this work, we show how the Ugi multicomponent reaction can be leveraged to postsynthetically modify imine-based COFs for the introduction of a diglycolic acid (DGA) moiety, an efficient scaffold for REE capture. The adsorption capacity of the DGA-functionalized COF was found to be more than 40 times higher than that of the pristine imine COF precursor and more than four times higher than that of the next-best reported DGA-functionalized solid support. This rationally designed COF has appealing characteristics of high adsorption capacity, fast and efficient capture and release of the REE ions, and reliable recyclability, making it one of the most promising adsorbents for solid–liquid REE ion extractions reported to date.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Metric Learning to Accelerate Convergence of Operator Splitting Methods

Recent developments in machine learning have led to promising advances in accelerating the solution of constrained optimization problems. Increasing demand for real-time decision-making capabilities in applications such as artificial intelligence and optimal control has led to a variety of proposed strategies for learning to produce fast solutions to optimization problems. For example, recent works have shown that it is possible to accelerate the convergence of optimization algorithms by learning to select their parameters, such as gradient descent stepsizes. This work proposes a new approach, in which the underlying metric spaces of proximal operator splitting algorithms are learned to maximize convergence rate. While prior works in optimization theory have derived optimal metrics in simple cases, no such result exists for many practical problem forms including general Quadratic Programming (QP). This paper shows how differentiable optimization can enable the end-to-end learning of proximal metrics, enhancing the convergence of proximal algorithms for QP problems beyond what is possible based on known theory. Additionally, the results illustrate a strong connection between the learned proximal metrics and active constraints at the optima, leading to an interpretation in which the predicted proximal metrics can be viewed as a form of active set prediction.

King, Ethan [BATTELLE (PACIFIC NW LAB)]↗
DOE OSTI2026

Deep learning-assisted modeling for χ (2) nonlinear optics

Modeling second-order (χ(2)) nonlinear optical processes remains computationally expensive due to the need to resolve fast field oscillations and simulate wave propagation using methods such as the split-step Fourier method (SSFM). This can become a bottleneck in real-time applications, such as high-repetition-rate laser systems requiring rapid feedback and control. We present a long short-term memory-based surrogate model trained on SSFM simulations generated from a start-to-end model of the photocathode drive laser at SLAC National Accelerator Laboratory’s Linac Coherent Light Source II. The model achieves over 250× speedup while maintaining high fidelity, enabling future real-time optimization and laying the foundation for data-integrated modeling frameworks and digital twins of laser systems.

Accelerator Physics (physics.acc-ph)↗
DOE OSTI2024

Forward variable selection enables fast and accurate dynamic system identification with Karhunen-Loève decomposed Gaussian processes

A promising approach for scalable Gaussian processes (GPs) is the Karhunen-Loève (KL) decomposition, in which the GP kernel is represented by a set of basis functions which are the eigenfunctions of the kernel operator. Such decomposed kernels have the potential to be very fast, and do not depend on the selection of a reduced set of inducing points. However KL decompositions lead to high dimensionality, and variable selection thus becomes paramount. This paper reports a new method of forward variable selection, enabled by the ordered nature of the basis functions in the KL expansion of the Bayesian Smoothing Spline ANOVA kernel (BSS-ANOVA), coupled with fast Gibbs sampling in a fully Bayesian approach. It quickly and effectively limits the number of terms, yielding a method with competitive accuracies, training and inference times for tabular datasets of low feature set dimensionality. Theoretical computational complexities are O ( N P 2 ) in training and O ( P ) per point in inference, where N is the number of instances and P the number of expansion terms. The inference speed and accuracy makes the method especially useful for dynamic systems identification, by modeling the dynamics in the tangent space as a static problem, then integrating the learned dynamics using a high-order scheme. The methods are demonstrated on two dynamic datasets: a ‘Susceptible, Infected, Recovered’ (SIR) toy problem, along with the experimental ‘Cascaded Tanks’ benchmark dataset. Comparisons on the static prediction of time derivatives are made with a random forest (RF), a residual neural network (ResNet), and the Orthogonal Additive Kernel (OAK) inducing points scalable GP, while for the timeseries prediction comparisons are made with LSTM and GRU recurrent neural networks (RNNs) along with the SINDy package.

Hayes, Kyle↗
DOE OSTI2025

Dynamic in vivo monitoring of granum structural changes of Ctenanthe setosa (Roscoe) Eichler during drought stress and subsequent recovery

Investigating the effects of drought stress and subsequent recovery on the structure and function of chloroplasts is essential to understanding how plants adapt to environmental stressors. We investigated Ctenanthe setosa (Roscoe) Eichler, an ornamental plant that can tolerate prolonged drought periods (40 and 49 days of water withdrawal). Conventional biochemical, biophysical, physiological and (ultra)structural methods combined for the first time in a higher plant with in vivo small-angle neutron scattering (SANS) were used to characterize the alterations induced by drought stress and subsequent recovery. Upon drought stress, no significant changes occurred in the chloroplast ultrastructure, chlorophyll content, 77K fluorescence emission spectra and maximal quantum efficiency of PSII (Qy dark), but the actual quantum efficiency of PSII (Qy light) decreased, the amounts of PSI-LHCII complexes and PSII monomers declined, and that of PSII supercomplexes increased. Thickness of the leaf and of the adaxial hypodermis, chloroplast length and granum repeat distance (RD) values decreased upon drought stress, as shown by light microscopy and SANS, respectively. Because of the very slight (nm-range) changes in RD values, the large biological variability (significant differences in RD values among the leaves and studied leaf regions) and the invasive sampling required for this method, transmission electron microscopy (TEM) hardly showed significant differences. On the other side, in situ SANS analyses provided a unique insight in vivo into the fast structural recovery of the granum structure of drought-stressed leaves, which happened already 18 h after re-watering, while functional and biochemical recovery took place on a longer time scale.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Fast and Scalable FFT-Based GPU-Accelerated Algorithms for Block-Triangular Toeplitz Matrices with Application to Linear Inverse Problems Governed by Autonomous Dynamical Systems

In this work, we present an efficient and scalable algorithm for performing matrix-vector multiplications (matvecs) for block Toeplitz matrices. Such matrices, which are shift-invariant with respect to their blocks, arise in the context of solving inverse problems governed by autonomous systems, and time-invariant systems in particular. In this article, we consider inverse problems that infer unknown parameters from observational data of a linear time-invariant dynamical system given in the form of partial differential equations (PDEs). Matrix-free Newton-conjugate-gradient methods are often the gold standard for solving these inverse problems, but they require numerous actions of the Hessian on a vector. Matrix-free adjoint-based Hessian matvecs require solution of a pair of linearized forward/adjoint PDE solves per Hessian action, which may be prohibitive for large-scale inverse problems. Time invariance of the forward PDE problem leads to a block Toeplitz structure of the discretized parameter-to-observable (p2o) map defining the mapping from inputs (parameters) to outputs (observables) of the PDEs. This block Toeplitz structure enables us to exploit two key properties: (1) compact storage of the p2o map and its adjoint, and (2) efficient fast Fourier transform–based Hessian matvecs. The proposed algorithm is mapped onto large multi-GPU clusters and achieves more than 80% of peak bandwidth on NVIDIA A100 GPUs. Excellent weak scaling is shown for up to 48 A100 GPUs. For the targeted problems, the implementation executes Hessian matvecs within fractions of a second, which is orders of magnitude faster than can be achieved by conventional matrix-free Hessian matvecs via forward/adjoint PDE solves.

97 MATHEMATICS AND COMPUTING↗