Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Field validation of dynamic mechanical torque measurements using fiber-optic strain sensors for geared wind turbines

Abstract Accurate knowledge of the mechanical loads of wind turbine gearboxes has become essential in modern, highly loaded gearbox designs, as maintaining or even improving gearbox reliability with increasing torque density demands is proving to be challenging. Unfortunately, the traditional method of measuring dynamic mechanical torque using strain gauges placed on the outer surface of a rotating shaft and transmitting the resulting signal is unsuitable for serial deployment due to technical and economic constraints. An alternative method based on fiber-optic strain sensors placed on the stationary outer surface of the gearbox ring gear has been proposed. Like shaft torsion, the radial deformation of the ring gear is proportionate to the rotor torque. Placing the sensors on a stationary component is a cost-effective alternative for serial implementation because the need for complex and expensive data transfer via wireless transmission or a slip ring is eliminated. In this paper, we present the results of an extensive field experiment conducted to evaluate the torque measurement accuracy of this novel sensing solution installed on the gearbox of a Gamesa G97 2-MW wind turbine at the National Renewable Energy Laboratory’s Flatirons Campus. Torque measurements derived from fiber-optic strain sensors placed on the ring gear of the planetary stage are compared to conventional torque measurements from strain gauges placed on the main shaft. Two different torque estimation data processing methods were evaluated, with the method based on operational deflection shapes providing the most accurate results with an average normalized root mean square error below 0.7% for a load revolution distribution analysis. The effect of operating conditions on the torque estimate was also investigated, and the third planet-passing operational deflection shape was found to be the least sensitive to nontorque load-related effects. The fiber-optic strain sensors’ successful operation during the complete test campaign has demonstrated a robust and accurate solution for fleet-wide enhanced gearbox remaining useful life estimation.

17 WIND ENERGY↗

Characterizing organic carbon dynamics during biostimulation of a uranium contaminated field site

Uranium contamination of groundwater remains a pressing problem at many former uranium mining and milling operations, such as the Rifle, Integrated Field Research Challenge (IFRC) site. Biostimulation of the subsurface with an organic carbon source such as acetate, followed by the microbially-induced reductive precipitation of uranium has been proposed as an effective remediation strategy. While uranium bioreduction has been studied in several field experiments, the transformation and fate of injected carbon remains poorly understood. This study evaluated the impact of added organic carbon on the long-term biogeochemical attenuation of uranium in the subsurface of a former mill tailings site. Fluorescence and ultraviolet–visible absorbance analyses were used together with dissolved organic carbon (DOC) measurements to track organic carbon dynamics during and post-biostimulation of the 2011 Rifle IFRC experiment. An electron mass balance was performed on well CD01 to account for any unidentified carbon sinks. Measured DOC values increased to 1.76 mM-C during biostimulation, and to 3.18 mM-C post-biostimulation over background DOC values of 0.3–0.4 mM-C. Elevated DOC levels persisted for 90 days after acetate injections ceased. The electron mass balance revealed that assumed electron acceptors would not account for the total amount of acetate consumed. Excitation–emission matrices showed an increase in signals associated with soluble microbial products, during biostimulation, which disappeared post-biostimulation despite an increase in total DOC. Specific ultraviolet absorbance analyses, indicated that DOC present post-biostimulation is less aromatic in nature, compared to background DOC. Furthermore, our results suggest that microbes convert injected acetate into a form of solid phase organic matter that may be available to sustain iron reduction post-stimulation.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Formulation, Implementation and Validation of a 1D Boundary Layer Inflow Scheme for the QUIC Modeling System

Recent studies have highlighted the importance of accurate meteorological conditions for urban transport and dispersion calculations. In this work, we present a novel scheme to compute the meteorological input in the Quick Urban & Industrial Complex () diagnostic urban wind solver to improve the characterization of upstream wind veer and shear in the Atmospheric Boundary Layer (ABL). The new formulation is based on a coupled set of Ordinary Differential Equations (ODEs) derived from the Reynolds Averaged Navier–Stokes (RANS) equations, and is fast to compute. Building upon recent progress in modeling the idealized ABL, we include effects from surface roughness, turbulent stress, Coriolis force, buoyancy and baroclinicity. We verify the performance of the new scheme with canonical Large Eddy Simulation (LES) tests with the GPU-accelerated FastEddy"Equation missing" solver in neutral, stable, unstable and baroclinic conditions with different surface roughness. Furthermore, we evaluate QUIC calculations with and without the new inflow scheme with real data from the Urban Threat Dispersion (UTD) field experiment, which includes Lidar-based wind measurements as well as concentration observations from multiple outdoor releases of a non-reactive tracer in downtown New York City. Compared to previous inflow capabilities that were limited to a constant wind direction with height, we show that the new scheme can model wind veer in the ABL and enhance the prediction of the surface cross-isobaric angle, improving evaluation statistics of simulated concentrations paired in time and space with UTD measurements.

54 ENVIRONMENTAL SCIENCES↗

Identification of Water-Saturated Zones in a Protective Hydraulic Earthen Structure by Synchronous Electromagnetic and Seismic Sounding

Results of field experiments in synchronized investigation of the protection embankment of the tailing pond of JSC Kovdor Mining and Processing Plant by means of different wave methods of electromagnetic and seismic sounding are presented. A comparative analysis of the data is carried out by means of which boundaries of zones of different degrees of water saturation of the embankment soils may be reliably established. The ranges of velocity of the electromagnetic wave and range of values of the ratio of the velocities of the longitudinal and transverse elastic wave in the transition from dry dense soil of the embankment to moistened soil right up through water-saturated soil are determined.

42 ENGINEERING↗

Self-absorption Effects on Alpha-Induced Atmospheric Nitrogen Fluorescence Yield

Nitrogen fluorescence induced by alpha, beta and gamma radiation can be used to detect the presence of radioactive contamination in the environment. Successful measurement of fluorescence yield involves a number of factors, including: known fluorescence signal rate during the measurement; the effective alpha spectrum of the radioactive sources used in the measurement; optical attenuation length of the fluorescence signal in air during the measurement; the absolute throughput of the instrumentation; calibration of the instrumentation; and radiation transport modeling of the "effective" array exposure rate given the spectrum of the alpha particles. Field testing of optical instrumentation was conducted to measure the nitrogen fluorescence yield from the alpha radiation generated from americium-241 (241Am) decay. The 241Am test sources were prepared by direct evaporation of ~1 mCi in nitric acid solution, and some solids were visible on the surface of the sources. A laboratory study was conducted with lower activities of 241Am to determine whether the presence of solids on the surface of the sources prepared both by direct evaporation and by electrodeposition onto stainless steel disks produced sufficient self-absorption to cause a decrease in expected fluorescence. Alpha spectroscopy was used to determine the apparent activity of the sources versus the known activity deposited on the surface. Results from the self-absorption laboratory studies were used to correct the activity values in the model and calculate the nitrogen fluorescence generated by the 241Am during the field experiments.

36 MATERIALS SCIENCE↗

Adsorption of Tracer Gases in Geological Media: Experimental Benchmarking

The interaction of xenon with containment barriers can play a crucial role in the detection of underground nuclear explosions. Independent field experiments and laboratory-derived models have observed depressed surface level xenon concentrations and subsequently predicted geological capture rates. This work sought to experimentally verify those predictions by analyzing xenon transport though a two-bulb diffusion apparatus adapted for the study of geologic media. Novel to this work is the timescale over which these experiments were carried out, allowing the system to reach equilibrium, rather than relying on numerical models to treat the equilibrium concentration of each gas as a fit coefficient.

Byers, Maggie↗

Simulation of Gas Production from Multilayered Hydrate-Bearing Media with Fully Coupled Flow, Thermal, Chemical and Geomechanical Processes Using TOUGH + Millstone. Part 1: Numerical Modeling of Hydrates

TOUGH + Millstone has been developed for the analysis of coupled flow, thermal and geomechanical processes associated with the formation and/or dissociation of CH4-hydrates in geological media. It is composed of two constituent codes: (a) a significantly enhanced version of the TOUGH + HYDRATE simulator, V2.0, that accounts for all known flow, physical, thermodynamic and chemical processes associated with the behavior of hydrate-bearing systems undergoing changes and includes the most recent advances in the description of the system properties, coupled seamlessly with (b) Millstone V1.0, a new code that addresses the conceptual, computational and mathematical shortcomings of earlier codes used to describe the geomechanical response of these systems. The capabilities of TOUGH + Millstone are demonstrated in the simulation and analysis of the system flow, thermal and geomechanical behavior during gas production from a realistic complex offshore hydrate deposit. In the first paper of this series, we discuss the physics underlying the T + H hydrate simulator, the constitutive relationships describing the physical, chemical (equilibrium and kinetic) and thermal processes, the states of the CH 4 + H 2 O system and the sources of critically important data, as well as the mathematical approaches used for the development of the of mass and energy balance equations and their solution. Finally, we provide verification examples of the hydrate code against numerical results from the simulation of laboratory and field experiments.

58 GEOSCIENCES↗

Soybean fallow and nitrification inhibitors: Strategies to reduce N 2 O emission intensities and N losses in Australian sugarcane cropping systems

The Australian sugar industry is facing mounting pressure to reduce the nitrogen (N) losses and nitrous oxide (N 2 O) emissions associated with N fertiliser use. Research has shown that N 2 O emissions from sugarcane (Saccharum officinarum L.) cropping systems can be reduced with the use of fertilisers coated with nitrification inhibitors, or by sowing legume crops in the fallows between sugarcane crop cycles. However, the efficacy of these two N management strategies across different climatic zones is still unclear, as results from field studies have been contradictory. The objectives of this study were therefore to use the DayCent model to assess the long-term effects of the two strategies (separately or in combination) on N 2 O emissions, N losses and yields. The model was parameterised using data from eight field experiments (39 treatments) conducted across four of the five main districts of the Australian sugarcane industry. A series of long-term scenarios embracing a range of N fertiliser rates (0- 160 kg N ha -1 applied as urea), climatic regions (Tropics and Subtropics), soil textures (fine- and coarse-textured soils) and N-loss risk scenarios (crop fertilised well before or close to the on-set of the wet season) were tested for both N management strategies. Simulations identified that the combined use of soybean (Glycine max L.) fallows and N fertiliser coated with the 3,4-dimethylpyrazole phosphate (DMPP) nitrification inhibitor was the most effective strategy to maintain or even increase current yields while significantly reducing N 2 O and cumulative N (mainly due to nitrate) losses. When used alone, the soybean fallow strategy on average reduced N losses over the entire crop cycle by 29 % compared with current industry best practice. However, this strategy showed a limited capacity to reduce N 2 O emissions over the entire cane crop cycle (median: -3% compared with current industry best practice), or even increased them in scenarios at high-risk of N losses in the Tropics. The use of urea coated with DMPP alone allowed current fertiliser N rates to be reduced by 30 % without any substantial yield penalty. In environments prone to high N losses, DMPP urea abated overall N losses and N 2 O emissions by 41 % and 30 %, respectively. This was the first study to use such an extensive dataset to parameterise a biogeochemical model for yields, N 2 O emissions and N losses in sugarcane cropping systems. Finally, the findings will be instrumental in guiding future research and policies designed to improve the profitability and environmental sustainability of this industry.

54 ENVIRONMENTAL SCIENCES↗

Arbuscular mycorrhizal fungal community responses to drought and nitrogen fertilization in switchgrass stands

Anthropogenic global change is increasing the severity and frequency of abiotic stresses such as drought that are likely to affect soil communities. Arbuscular mycorrhizal fungi (AMF) play important roles in many soil processes, so it is important to understand how drought affects AMF biodiversity. This is especially relevant in agricultural systems where crops rely on AMF associations for water and nutrient uptake, and where management decisions such as crop selection and fertilizer application may influence how the AMF community responds to drought. In this study, we examined the effects of reduced precipitation and nitrogen fertilization on AMF richness, community composition, and root and soil colonization in monocultures of two cultivars of switchgrass (Panicum virgatum) grown for bioenergy feedstock. We conducted a two-year field experiment using rain-out shelters to manipulate precipitation in mature stands of switchgrass growing in a long-term nitrogen fertilization (0 or 56 kg N ha –1 ) experiment at the W.K. Kellogg Biological Station Long-Term Ecological Research site in Michigan, USA. We expected that AMF richness and colonization would decrease due to drought, as predicted by the stress exclusion hypothesis. Contrary to our expectations, we found that drought stress increased AMF species richness in fertilized plots by 15%; there was no effect of drought on AMF richness in unfertilized plots. Drought also significantly altered AMF community composition, primarily due to increases in Rhizophagus taxa abundance, and reduced AMF root colonization in switchgrass by 6%. We also found variation in AMF richness and colonization across switchgrass cultivars as well as sampling dates. Furthermore, the changes in AMF richness and composition that we observed in this study may have implications for perennial bioenergy feedstock selection and management as changes in AMF communities may feedback to affect host plants.

54 ENVIRONMENTAL SCIENCES↗

Turbulent transport and reactions of plant-emitted hydrocarbons in an Amazonian rain forest

The processes governing the temporal and spatial patterns of isoprene and monoterpenes emitted by a rainforest in the central Amazon region of Brazil is investigated using a combination of field experiments and numerical simulations. Specifically, Large Eddy Simulations (LES) were used to resolve emissions of isoprene and monoterpenes, turbulent transport, and air chemistry. The coupled chemistry-transport LES included the effects of isoprene and monoterpenes reactivity due to reactions with hydroxyl radical and ozone. The LES results are used to compute vertically resolved budgets of isoprene and monoterpenes in the rainforest canopy in response to emissions, turbulent transport, surface deposition, and air chemistry. Our results indicated that emission and dispersion dominated the isoprene budget as the gases were transported out of the canopy space. In a region limited by nitrogen oxides (with prevailing nitric oxide levels of < 0.5 parts per billion), the in-canopy chemical destruction removed approximately 10% of locally emitted monoterpenes. Hydroxyl radical production rates from the ozonolysis of monoterpenes amounted to ≈ 2 x 10 6 radicals cm -3 s -1 and had similar magnitude to the light-dependent hydroxyl radical formation. One key conclusion was that the Amazonia rainforest abundantly emitted monoterpenes whose in-canopy ozonolysis yielded hydroxyl radicals in amounts similar to the magnitude of light-dependent formation. Reactions of monoterpenes and isoprene with hydroxyl radical and ozone were necessary for the maintenance of the Amazon rainforest canopy as a photochemically active environment suitable to generate oxidants and secondary organic aerosols.

54 ENVIRONMENTAL SCIENCES↗

Review of thermal comfort infused with the latest big data and modeling progresses in public health

Thermal environment is important for both occupants’ comfort and health. Previously, the impacts of thermal environment were explored in the areas of thermal comfort and public health separately. This paper aims to bridge both disciplines by examining the correlation between comfort temperature and Minimum Mortality Temperature (MMT), which is a key index quantifying the association of health and weather temperature, through literature review and data-driven approach. It was found that the MMT data obtained from the public health area are generally in good agreement with the thermal neutral temperatures from the comfort perspective. The MMT data range from 17.2 °C to 30 °C, which are similar to the thermal neutral temperatures ranging from 19.5 °C to 30 °C based on the global field tests. Moreover, the MMT data demonstrate the potential to capture some complex distribution patterns of the field comfort data. The introduction of the health-temperature data could assist the intensive field experiments and modeling efforts and complement the thermal comfort dataset, which suffers from the problems of limited sample size. Some discrepancies between the two datasets were identified as well. The contextual factors other than the climate factor which may cause such discrepancies, such as socio-economics, population densities, etc. should be analyzed to enable the potential application of the health-temperature data and modeling to thermal comfort and health studies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Genomic expansion of domain archaea highlights roles for organisms from new phyla in anaerobic carbon cycling.

Archaea represent a significant fraction of Earth's biodiversity, yet they remain much less well understood than Bacteria. Gene surveys, a few metagenomic studies, and some single-cell sequencing projects have revealed numerous little-studied archaeal phyla. Certain lineages appear to branch deeply and may be part of a major phylum radiation. The structure of this radiation and the physiology of the organisms remain almost unknown.We used genome-resolved metagenomic analyses to investigate the diversity, genomes sizes, metabolic capacities, and potential roles of Archaea in terrestrial subsurface biogeochemical cycles. We sequenced DNA from complex sediment and planktonic consortia from an aquifer adjacent to the Colorado River (USA) and reconstructed the first complete genomes for Archaea using cultivation-independent methods. To provide taxonomic context, we analyzed an additional 151 newly sampled archaeal sequences. We resolved two new phyla within a major, apparently deep-branching group of phyla (a superphylum). The organisms have small genomes, and metabolic predictions indicate that their primary contributions to Earth's biogeochemical cycles involve carbon and hydrogen metabolism, probably associated with symbiotic and/or fermentation-based lifestyles.The results dramatically expand genomic sampling of the domain Archaea and clarify taxonomic designations within a major superphylum. This study, in combination with recently published work on bacterial phyla lacking cultivated representatives, reveals a fascinating phenomenon of major radiations of organisms with small genomes, novel proteome composition, and strong interdependence in both domains.

Castelle, Cindy J↗

Comparison of structurally diverse simulation models for prediction of epidemic outcomes caused by a long-distance dispersed pathogen

Long-distance dispersal (LDD) pathogens pose substantial challenges for epidemic control due to their ability to generate new infection foci at great distances. While various modeling approaches have been developed to understand and manage such outbreaks, little work has compared how models of different structures behave under shared conditions. Here, in this study, we compare four structurally distinct epidemiological models — EPIMUL, GEMF, PoPS, and Warwick — each adapted to simulate the spread of wheat stripe rust (WSR), a wind-dispersed LDD pathogen, under identical epidemiological parameters and dispersal kernel. Using data from a controlled field experiment, we evaluate the ability of each model to replicate disease prevalence under nine intervention scenarios that vary in timing and culling area. While the models differ substantially in design — ranging from spatial grid-based to network-based and raster-based frameworks — the shared dispersal kernel allowed for close alignment in their predictions. All models accurately captured general epidemic trends, particularly the strong effect of early intervention on disease suppression. We qualitatively compared their behavioral responses across scenarios and also evaluated an ensemble prediction by averaging across model outputs. Our findings highlight how integrating shared epidemiological components into distinct modeling frameworks can improve consistency and accuracy, while reinforcing the importance of early culling in managing LDD pathogen outbreaks.

Dispersal kernel↗

Development, calibration, and validation of a novel gray-box energy model for residential split air conditioners

Energy models for vapor compression refrigeration in residential air conditioners have been developed through white-box, gray-box, and black-box methods in decades. However, existing white-box and gray-box models require complicated equations with detailed geometries while black-box models require substantial experimental data. Further, this paper aims to develop and validate a simple gray-box steady-state energy model without the need for detailed geometries, which can accurately predict the cooling capacity and electrical power input based on outdoor and indoor air conditions, and supply airflow rates. First three state variables, including the evaporation and condensation temperatures, and refrigerant mass flowrate, are applied to develop the energy model and are solved by three physical equations, including the energy conservations at the evaporator and condenser, and the refrigerant volume-mass flow correlation of the compressor. Secondly, seven performance property functions related to three state variables and three physical equations are identified and calibrated by simple temperature and power measurements. Finally, field experiments are conducted on a residential air conditioner to calibrate these performance property functions and validate the developed model. The validated results reveal the model can accurately predict the cooling capacity and electrical power input, with the normalized root mean square errors of 2.3% and 0.87% respectively.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Impact of grassland fire dynamics on particulate emission factors

Understanding particulate emission factors in grassland fires is critical for improving air quality assessments and refining emissions inventories. This study explores the dynamic and heterogeneous nature of fire processes and their influence on particulate emissions. Traditional emission factor inventories often rely on static values, overlooking the spatially and temporally variable dynamics of fire behavior. Through field experiments conducted at Konza Prairie Biological Station measuring emissions with uncrewed aerial vehicles, and computational modeling using HIGRAD/FIRETEC, this research highlights the dependency of emission production on localized fire dynamics, including ignition patterns, fuel properties, and atmospheric conditions. The results demonstrate a need for fire dynamic considerations to accurately capture emissions variability.

09 BIOMASS FUELS↗

Chemically- and mechanically-mediated influences on the transport and mechanical characteristics of rock fractures

A model is presented to represent changes in the mechanical and transport characteristics of fractured rock that result from coupled mechanical and chemical effects. The specific influence is the elevation of dissolution rates on contacting asperities, which results in a stress- and temperature-dependent permanent closure. A model representing this pressure-dissolution-like behavior is adapted to define the threshold and resulting response in terms of fundamental thermodynamic properties of a contacting fracture. These relations are incorporated in a stress-stiffening model of fracture closure to define the stress- and temperature-dependency of aperture loss and behavior during stress and temperature cycling. These models compare well with laboratory and field experiments, representing both decoupled isobaric and isothermal responses. The model was applied to explore the impact of these responses on heated structures in rock. The result showed a reduction in ultimate induced stresses over the case where chemical effects were not incorporated, with permanent reduction in final stresses after cooling to ambient conditions. Similarly, permeabilities may be lower than they were in the case where chemical effects were not considered, with a net reduction apparent even after cooling to ambient temperature. These heretofore-neglected effects may have a correspondingly significant impact on the performance of heated structures in rock, such as repositories for the containment of radioactive wastes.

54 ENVIRONMENTAL SCIENCES↗

Estimation of deformation and stiffness of fractures close to tunnels using data from single-hole hydraulic testing and grouting

Sealing of tunnels in fractured rocks is commonly performed by pre- or post-excavation grouting. The grouting boreholes are frequently drilled close to the tunnel wall, an area where rock stresses can be low and fractures can more easily open up during grout pressurization. In this paper we suggest that data from hydraulic testing and grouting can be used to identify grout-induced fracture opening, to estimate fracture stiffness of such fractures, and to evaluate its impact on the grout performance. A conceptual model and a method are presented for estimating fracture stiffness. The method is demonstrated using grouting data from four pre-excavation grouting boreholes at a shallow tunnel (50 m) in Nygard, Sweden, and two post-excavation grouting boreholes at a deep tunnel (450 m) in Aespoe HRL, Sweden. The estimated stiffness of intersecting fractures for the boreholes at the shallow Nygard tunnel are low (2-5 GPa/m) and in agreement with literature data from field experiments at other fractured rock sites. Higher stiffness was obtained for the deeper tunnel boreholes at Aespoe which is reasonable considering that generally higher rock stresses are expected at greater depths. Our method of identifying and evaluating the properties and impact of deforming fractures might be most applicable when grouting takes place in boreholes adjacent to the tunnel wall, where local stresses might be low and where deforming (opening) fractures may take most of the grout.

54 ENVIRONMENTAL SCIENCES↗

Propagation method and planting density influence canopy developmental transition and biomass productivity in Miscanthus × giganteus

Understanding how establishment practices influence the mechanisms underlying Miscanthus × giganteus (miscanthus) productivity and canopy development is critical for optimizing management. Data was collected during the juvenile (2011–2013) and mature (2024) phases of a long-term field experiment established in Urbana, Illinois, to evaluate the effects of propagation method (plug propagation [PP] and rhizome propagation [RP]), planting density (1.0, 0.75, and 0.25 plants m⁻²), and nitrogen application (0 and 67 kg N ha⁻¹) on end-of-season biomass yield, tiller mass, tiller density, and tiller height. Linear regression models identified the dominant predictors of yield across stand ages and management regimes. Planting density, nitrogen (N) application, and propagation method significantly influenced early yield and canopy development. During the juvenile phase, biomass yield was driven by tiller density due to canopy expansion; in the mature phase, yield became driven by tiller mass. The PP plots produced higher tiller density than the RP plots, resulting in faster canopy closure and higher juvenile-phase yields. Rhizome-propagated (RP) plots produced lower tiller density, but individual tillers were 3.3–6.4 g tiller −1 heavier than PP tillers. After the canopy reached equilibrium, the PP and RP yields were similar because greater RP tiller mass compensated for its lower tiller density. Higher planting density resulted in greater yield and tiller density during the second year (2012), but this effect was absent from the third year (2013) onward. In the juvenile phase, N fertilization enhanced yield by 1.6–3.4 Mg ha −1 . Initiating fertilization in 2013 on unfertilized plots produced biomass similar to that in fertilized plots, suggesting yield recovery in the mature phase. These findings revealed that establishment strategies, including propagation method and planting density, influence juvenile miscanthus canopy development and productivity, transitioning from tiller-density- to mass-dominated yields, but not mature phase productivity.

09 BIOMASS FUELS↗