SEARCH · Search NASA

Results for “Finite Difference Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Flow simulations for nacelle-propeller configurations using Euler equations

Euler codes for both axisymmetric and general three-dimensional nacelle-propeller flow analysis have been developed. Surface-fitted grids are generated either by a finite difference method or by an algebraic method. The propeller is represented by an actuator disk along a computational plane where proper boundary conditions are assigned to simulate the propeller power loading. Computed results for a NASA SR3 propeller as well as a NASA turboprop configuration are compared with test data. Good agreement has been achieved through the present simulation method.

Yu, N. J.↗

NASA NTRS1984

Development and applications of algorithms for calculating the transonic flow about harmonically oscillating wings

A finite difference method to solve the unsteady transonic flow about harmonically oscillating wings was investigated. The procedure is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady differential equation for small disturbances. The differential equation for the unsteady velocity potential is linear with spatially varying coefficients and with the time variable eliminated by assuming harmonic motion. An alternating direction implicit procedure was investigated, and a pilot program was developed for both two and three dimensional wings. This program provides a relatively efficient relaxation solution without previously encountered solution instability problems. Pressure distributions for two rectangular wings are calculated. Conjugate gradient techniques were developed for the asymmetric, indefinite problem. The conjugate gradient procedure is evaluated for applications to the unsteady transonic problem. Different equations for the alternating direction procedure are derived using a coordinate transformation for swept and tapered wing planforms. Pressure distributions for swept, untaped wings of vanishing thickness are correlated with linear results for sweep angles up to 45 degrees.

Ehlers, F. E.↗

NASA NTRS1984

Shock capturing finite difference algorithms for supersonic flow past fighter and missile type configurations

The construction of a reliable, shock capturing finite difference method to solve the Euler equations for inviscid, supersonic flow past fighter and missile type configurations is highly desirable. The numerical method must have a firm theoretical foundation and must be robust and efficient. It should be able to treat subsonic pockets in a predominantly supersonic flow. The method must also be easily applicable to the complex topologies of the aerodynamic configuration under consideration. The ongoing approach to this task is described and for steady supersonic flows is presented. This scheme is the basic numerical method. Results of work obtained during previous years are presented.

Osher, S.↗

NASA NTRS1984

A preliminary study of numerical simulation of thermosolutal convection of interest to crystal growth

Calculations were performed with computer models using three types of finite difference methods of thermosolutal convection: horizontal heating of a container filled with a stably stratified solution, finger convection in a container, and finger convection in a horizontally infinite channel. The importance of including thermosolutal convection in models of crystal growth is emphasized, and the difficulties in doing so are demonstrated. It is pointed out that these difficulties, due primarily to the fine structure of the convection, may be partly overcome by the use of fine grids and implicit time stepping methods.

Miller, T. L.↗

NASA NTRS1985

Use of a hyperbolic grid generation scheme in simulating supersonic viscous flow about three-dimensional winged configuration

The present paper describes a numerical mesh generation technique to be used with an implicit finite difference method for simulating visous supersonic flow about low-aspect-ratio wing body configurations using a single grid strategy. The computational domain is segmented into multiple regions, with borders located in supersonic areas to avoid the otherwise costly interfacing procedure between adjacent segments. The numerical procedure is applied to calculate the turbulent flow around the shuttle orbiter and a canard projectile at supersonic free stream Mach number.

Rizk, Y. M.↗

NASA NTRS1984

Airfoil trailing edge flow measurements and comparison with theory, incorporating open wind tunnel corrections

Trailing edge data for boundary layer-near wake thickness parameters are given for airfoils and flat plates. Reynolds number effects are examined as a function of model size, velocity and boundary layer tripping. These data expand that presented previously by the authors particularly for airfoil non-zero angles of attack. Comparisons are made here with boundary layer calculations using potential flow modeling and a well documented two-dimensional finite-difference method for laminar and turbulent boundary layers. Open wind tunnel corrections to angle of attack and camber are developed and are incorporated in the potential flow modeling to assure correct comparisons for non-zero angles of attack. It was found that although the open tunnel flow turbulence affected boundary layer transition for the higher velocities the theory successfully 'brackets' the data. Comparisons demonstrate the degree of accuracy one might expect for the prediction of boundary layer thickness parameters when given only geometry and nominal flow conditions as input to boundary layer codes.

Brooks, T. F.↗

NASA NTRS1985

A study of the effects of numerical dissipation on the calculation of supersonic separated flows

An extensive investigation of the effect of numerical dissipation on the calculation of supersonic, separated flow over a rearward-facing step is carried out. The complete two-dimensional Navier-Stokes equations are solved by means of MacCormack's standard explicit, unsplit, time-dependent, finite difference method. A fourth-order numerical dissipation term is added explicitly. The magnitude of this term is progressively varied, and its consequences on the flowfield calculations are identified and studied. For a cold-wall, heat transfer case, numerical dissipation had a major effect on the results, particularly in the separated region. However, rather dramatically for an adiabatic wall case, numerical dissipation had virtually no effect on the results. The role of grid size on both the influence of numerical dissipation, and on the overall accuracy of the separated flow solutions is discussed.

Kuruvila, G.↗

NASA NTRS1985

The numerical simulation of steady transonic rotational flow using a dual potential formulation

A finite-difference method is presented that simulates steady transonic rotational flow of an inviscid fluid by representing the velocity field as the sum of scalar and vector potentials. This dual potential velocity decomposition extends the validity of the scalar (full) velocity potential to include vorticity. The inclusion of a vector potential also permits an alternate treatment of lift that does not require a circulation wake cut. This is accomplished by specifying the vector potential as a constant on the airfoil surface in order to satisfy a Kutta condition. The governing equations are solved as iteratively decoupled scalar equations using approximate factorization techniques, and the overall efficiency approaches that of the full potential equation. The governing equations are able to convect entropy and vorticity throughout the flow field and are equivalent to the Euler equations in continuous flow domains, however at shocks the Rankine-Hugoniot entropy jump must be supplied. An entropy correction method is presented and verified with transonic airfoil solutions of the Euler equations.

Chaderjian, N. M.↗

NASA NTRS1985

Full two-dimensional transient solutions of electrothermal aircraft blade deicing

Two finite difference methods are presented for the analysis of transient, two-dimensional responses of an electrothermal de-icer pad of an aircraft wing or blade with attached variable ice layer thickness. Both models employ a Crank-Nicholson iterative scheme, and use an enthalpy formulation to handle the phase change in the ice layer. The first technique makes use of a 'staircase' approach, fitting the irregular ice boundary with square computational cells. The second technique uses a body fitted coordinate transform, and maps the exact shape of the irregular boundary into a rectangular body, with uniformally square computational cells. The numerical solution takes place in the transformed plane. Initial results accounting for variable ice layer thickness are presented. Details of planned de-icing tests at NASA-Lewis, which will provide empirical verification for the above two methods, are also presented.

Masiulaniec, K. C.↗

NASA NTRS1985

A fully implicit scheme for the barotropic primitive equations

An efficient implicit finite-difference method is developed and tested for a global barotropic model. The scheme requires, at each time step, the solution of only one-dimensional block-tridiagonal linear systems. This additional computation is offset by the use of a time step chosen independently of the mesh spacing. The method is second-order accurate in time and fourth-order accurate in space. Present experience indicates that this implicit method is practical for numerical simulation on fine meshes.

Cohn, S. E.↗

NASA NTRS1985

Large deflections of circular isotropic membranes subjected to arbitrary axisymmetric loading

Circular membranes with fixed peripheral edges, subjected to arbitrary axisymmetric loading were analyzed. A single governing differential equation in terms of radial stress was used. This nonlinear governing equation was solved using the finite difference method in conjunction with Newton-Raphson method. Three loading cases, namely: (1) uniformly loaded membrane, (2) a membrane with uniform load over an inner portion, and (3) a membrane with ring load, were analyzed. Calculated central displacement and the central and edge radial stresses for uniformly loaded membrane, agreed extremely well with the classical solution.

Kelkar, A.↗

NASA NTRS1986

Multiple Grids in Finite-Difference Flow Analysis

Multiple solutions superimposed to resolve flows about complex configurations. Use of multiple, overset grids in computational fluid dynamics extends application of finite-difference methods to more complex configurations. Rather than trying to generate single mesh about all components of configuration, multiple, individual meshes used, then overset on major grid. Major grid used to resolve flow field or wrapped around main component.

Dougherty, F. C.↗

NASA NTRS1985

Algebraic grid generation using tensor product B-splines

Finite difference methods are more successful if the accompanying grid has lines which are smooth and nearly orthogonal. The development of an algorithm which produces such a grid when given the boundary description. Topological considerations in structuring the grid generation mapping are discussed. The concept of the degree of a mapping and how it can be used to determine what requirements are necessary if a mapping is to produce a suitable grid is examined. The grid generation algorithm uses a mapping composed of bicubic B-splines. Boundary coefficients are chosen so that the splines produce Schoenberg's variation diminishing spline approximation to the boundary. Interior coefficients are initially chosen to give a variation diminishing approximation to the transfinite bilinear interpolant of the function mapping the boundary of the unit square onto the boundary grid. The practicality of optimizing the grid by minimizing a functional involving the Jacobian of the grid generation mapping at each interior grid point and the dot product of vectors tangent to the grid lines is investigated. Grids generated by using the algorithm are presented.

Saunders, B. V.↗

NASA NTRS1985

Numerical solutions of Navier-Stokes equations for a Butler wing

The flow field is simulated on the surface of a given delta wing (Butler wing) at zero incident in a uniform stream. The simulation is done by integrating a set of flow field equations. This set of equations governs the unsteady, viscous, compressible, heat conducting flow of an ideal gas. The equations are written in curvilinear coordinates so that the wing surface is represented accurately. These equations are solved by the finite difference method, and results obtained for high-speed freestream conditions are compared with theoretical and experimental results. In this study, the Navier-Stokes equations are solved numerically. These equations are unsteady, compressible, viscous, and three-dimensional without neglecting any terms. The time dependency of the governing equations allows the solution to progress naturally for an arbitrary initial initial guess to an asymptotic steady state, if one exists. The equations are transformed from physical coordinates to the computational coordinates, allowing the solution of the governing equations in a rectangular parallel-piped domain. The equations are solved by the MacCormack time-split technique which is vectorized and programmed to run on the CDC VPS 32 computer.

Abolhassani, J. S.↗

NASA NTRS1985

Interface procedures for overlapping grids

Interpolation at grid boundaries is studied for the purpose of solving partial differential equations using either implicit or conservative explicit finite-difference methods on multi-component overlapping grid systems.

Mastin, C. W.↗

NASA NTRS1984

User's guide for NASCRIN: A vectorized code for calculating two-dimensional supersonic internal flow fields

A computer program NASCRIN has been developed for analyzing two-dimensional flow fields in high-speed inlets. It solves the two-dimensional Euler or Navier-Stokes equations in conservation form by an explicit, two-step finite-difference method. An explicit-implicit method can also be used at the user's discretion for viscous flow calculations. For turbulent flow, an algebraic, two-layer eddy-viscosity model is used. The code is operational on the CDC CYBER 203 computer system and is highly vectorized to take full advantage of the vector-processing capability of the system. It is highly user oriented and is structured in such a way that for most supersonic flow problems, the user has to make only a few changes. Although the code is primarily written for supersonic internal flow, it can be used with suitable changes in the boundary conditions for a variety of other problems.

Kumar, A.↗

NASA NTRS1986

Navier-Stokes computations for circulation controlled airfoils

Navier-Stokes computations of subsonic to transonic flow past airfoils with augmented lift due to rearward jet blowing over a curved trailing edge are presented. The approach uses a spiral grid topology. Solutions are obtained using a Navier-Stokes code which employs an implicit finite difference method, an algebraic turbulence model, and developments which improve stability, convergence, and accuracy. Results are compared against experiments for no jet blowing and moderate jet pressures and demonstrate the capability to compute these complicated flows.

Pulliam, T. H.↗

NASA NTRS1986

Wall reflection of a viscous vortex ring

The behavior of a viscous axisymmetric vortex ring being reflected from a wall is investigated. The incompressible Navier-Stokes equations formulated in terms of the vorticity function and vector potential are numerically integrated by implicit finite difference methods. To specify the vector potential at a far boundary from the wall, the existing integral method used so far only for an unbounded domain is modified by a kind of image method. The trajectory of the vortex ring calcualted as a result closely resembles that observable from the experiment.

Sa, J. Y.↗