SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Live footage shows some beautiful panoramic views of STS-37 on the pad. Scenes include the narration of simulated auto sequence start, engine start, engine firing and cut-off. Also shown is the crew emergency egress procedure. This is tape 3 of 3. Tape 1 has a report # of NONP-NASA-VT-2000013416, and tape 2 has a report # of NONP-NASA-VT-2000013417.
A report discusses a cryogenic reaction control system (RCS) that integrates a Joule-Thompson (JT) device (expansion valve) and thermodynamic vent system (TVS) with a cryogenic distribution system to allow fine control of the propellant quality (subcooled liquid) during operation of the device. It enables zero-venting when coupled with an RCS engine. The proper attachment locations and sizing of the orifice are required with the propellant distribution line to facilitate line conditioning. During operations, system instrumentation was strategically installed along the distribution/TVS line assembly, and temperature control bands were identified. A sub-scale run tank, full-scale distribution line, open-loop TVS, and a combination of procured and custom-fabricated cryogenic components were used in the cryogenic RCS build-up. Simulated on-orbit activation and thruster firing profiles were performed to quantify system heat gain and evaluate the TVS s capability to maintain the required propellant conditions at the inlet to the engine valves. Test data determined that a small control valve, such as a piezoelectric, is optimal to provide continuously the required thermal control. The data obtained from testing has also assisted with the development of fluid and thermal models of an RCS to refine integrated cryogenic propulsion system designs. This system allows a liquid oxygenbased main propulsion and reaction control system for a spacecraft, which improves performance, safety, and cost over conventional hypergolic systems due to higher performance, use of nontoxic propellants, potential for integration with life support and power subsystems, and compatibility with in-situ produced propellants.
Light- and elevated temperature-induced degradation (LeTID) is a detrimental effect observed under operating conditions in p-type multicrystalline silicon (mc-Si) solar cells. In this paper, we employ synchrotron-based techniques to study the dissolution of precipitates due to different firing processes at grain boundaries in LeTID-affected mc-Si. The synchrotron measurements show clear dissolution of collocated metal precipitates during firing. We compare our observations with degradation behavior in the same wafers. The experimental results are complemented with process simulations to provide insight into the change in bulk point defect concentration due to firing. Several studies have proposed that LeTID is caused by metal-rich precipitate dissolution during contact firing, and we find that the solubility and diffusivity are promising screening metrics to identify metals that are compatible with this hypothesis. While slower and less soluble elements (e.g., Fe and Cr) are not compatible according to our simulations, the point defect concentrations of faster and more soluble elements (e.g., Cu and Ni) increase after a high-temperature firing process, primarily due to emitter segregation rather than precipitate dissolution. Finally, these results are a useful complement to lifetime spectroscopy techniques, and can be used to evaluate additional candidates in the search for the root cause of LeTID.
Evaluating the response of the land carbon sink to the anomalies in temperature and drought imposed by El Niño events provides insights into the present-day carbon cycle and its climate-driven variability. It is also a necessary step to build confidence in terrestrial ecosystems models' response to the warming and drying stresses expected in the future over many continents, and particularly in the tropics. Here we present an in-depth analysis of the response of the terrestrial carbon cycle to the 2015/2016 El Niño that imposed extreme warming and dry conditions in the tropics and other sensitive regions. First, we provide a synthesis of the spatio-temporal evolution of anomalies in net land–atmosphere CO 2 fluxes estimated by two in situ measurements based on atmospheric inversions and 16 land-surface models (LSMs) from TRENDYv6. Simulated changes in ecosystem productivity, decomposition rates and fire emissions are also investigated. Inversions and LSMs generally agree on the decrease and subsequent recovery of the land sink in response to the onset, peak and demise of El Niño conditions and point to the decreased strength of the land carbon sink: by 0.4–0.7 PgC yr –1 (inversions) and by 1.0 PgC yr –1 (LSMs) during 2015/2016. As a result, LSM simulations indicate that a decrease in productivity, rather than increase in respiration, dominated the net biome productivity anomalies in response to ENSO throughout the tropics, mainly associated with prolonged drought conditions.
This paper presents experimental results of a prototype high temperature co-fired ceramic (HTCC) package with Au/Pt metallization in a three-phase harsh environment test that culminated with 60-day demonstration in simulated Venus surface environment of 465 degC with corrosive atmosphere at 90 bar pressure. The prototype package is based on previously developed and reported HTCC package successfully tested with multiple analog and digital silicon carbide (SiC) high temperatures semiconductor integrated circuits (ICs) at NASA Glenn Research Center in 500 degC Earth air ambient for over ten thousands hours, and short-term tested at temperatures above 800 degC. The three-phase harsh environment test started with 48 hours in 465 degC Earth air, followed by 48 hours in 465 degC nitrogen at 90 bar pressure and 1400 hours in simulated Venus surface environment of 465 degC with corrosive atmosphere at 90 bar. Initial analytical results of the package materials and surfaces after exposure to Venus environment are discussed to assess the stability of the packaging materials in the tested environments. The test in simulated Venus environment was implemented in the NASA Glenn Extreme Environment Rig (GEER). The results of this study suggest that an effective encapsulation of areas of surface metallization and vicinities may help to improve electrical performance of a HTCC alumina packaging system in Venus environment.
This paper presents experimental results of a prototype high temperature co-fired ceramic (HTCC) package with Au/Pt metallization in a three-phase harsh environment test that culminated with 60-day demonstration in simulated Venus surface environment of 465 degrees Centigrade with corrosive atmosphere at 90 bars pressure. The prototype package is based on a previously developed and reported HTCC package successfully tested with multiple analog and digital silicon carbide (SiC) high temperatures semiconductor integrated circuits (ICs) at NASA Glenn Research Center in 500 degrees Centigrade Earth air ambient for over ten thousand hours, and short-term tested at temperatures above 800 degrees Centigrade. The three-phase harsh environment test started with 48 hours in 465 degrees Centigrade Earth air, followed by 48 hours in 465 degrees Centigrade nitrogen at 90-bar pressure and 1400 hours in simulated Venus surface environment of 465 degrees Centigrade with corrosive atmosphere at 90 bars. Initial analytical results of the package materials and surfaces after exposure to the Venus environment are discussed to assess the stability of the packaging materials in the tested environments. The test in a simulated Venus environment was implemented in the NASA Glenn Extreme Environment Rig (GEER). The results of this study suggest that an effective encapsulation of areas of surface metallization and vicinities may help to improve electrical performance of a HTCC alumina packaging system in Venus environment.
This data package supports the publication “Fire-altered Carbon Pools Create Disturbance Memory in Stream Dissolved Organic Carbon” by Li et al. (2026). The package contains processed model inputs, configuration files, restart files, simulation outputs, scripts, and visualization products used to evaluate post-fire dissolved organic carbon (DOC) dynamics in the Naches River Watershed, Washington, USA, following the 2021 Schneider Springs Fire. The modeling workflow couples ELM-BGC, the biogeochemistry-enabled Energy Exascale Earth System Model Land Model; ATS, the Advanced Terrestrial Simulator for integrated surface-subsurface hydrology; and PFLOTRAN, a reactive transport model for multicomponent aqueous geochemistry. Together, these models simulate how wildfire-induced changes in vegetation, litter, coarse woody debris, and soil organic matter influence DOC production, transport, and reaction from burned hillslopes to stream networks. The archive includes preprocessed meteorological, geospatial, hydrologic, and biogeochemical forcing data; ELM-BGC-derived DOC source terms; ATS mesh files; PFLOTRAN reactive-transport inputs; model configuration files; spin-up and transient restart files; watershed-scale diagnostic outputs; stream concentration time series; and figures or visualization files used to inspect and reproduce key results. File types include Hierarchical Data Format 5 (HDF5) files for gridded forcing and model-coupling data, model input and configuration files for ELM-BGC, ATS, and PFLOTRAN, restart and simulation-output files generated by the modeling workflow, tabular or time-series diagnostic outputs, scripts for post-processing and figure generation, and image or visualization products associated with the manuscript. Use of the package depends on the intended task. Re-running the simulations requires the relevant modeling software, including ELM-BGC, ATS, and PFLOTRAN as ATS's geochemical engine. Inspecting outputs and reproducing figures requires Python with scientific plotting libraries such as Matplotlib, and three-dimensional model outputs may be viewed with ParaView. Geographic information system files or maps may be inspected with ArcGIS Pro or comparable GIS software. The data package is intended to enable traceability, reuse, and partial reproduction of the coupled land-to-watershed hydro-biogeochemical modeling workflow used to test how wildfire disturbance affects terrestrial carbon pools and downstream DOC dynamics.
The concept for a dual test item has been developed for use in simulating live initiators/detonators during ground testing to verify the proper operation of the safing and firing circuitry for ground and flight systems ordnance as well as continuous monitoring for any stray voltages. Previous ordnance simulators have consisted of fuses, flash bulbs, inert devices with bridge wires, and actual live ordnance items mounted in test chambers. Stray voltage detectors have included devices connected to the firing circuits for continuous monitoring and a final no-voltage test just prior to ordnance connection. The purpose of this combined ordnance simulation and stray-voltage detection is to provide an improved and comprehensive method to ensure the ordnance circuitry is verified safe and operational.
Variations in cavity wall and injection configurations of the gas core reactor were aimed at establishing flow patterns that give a maximum of the nuclear criticality eigenvalue. Correlation with the nuclear effect was made using multigroup diffusion theory normalized by previous benchmark critical experiments. Air was used to simulate the hydrogen propellant in the flow tests, and smoked air, argon, or Freon to simulate the central nuclear fuel gas. Tests were run both in the down-firing and upfiring directions. Results showed that acceptable flow patterns with volume fraction for the simulated nuclear fuel gas and high flow rate ratios of propellant to fuel can be obtained. Using a point injector for the fuel, good flow patterns are obtained by directing the outer gas at high velocity long the cavity wall, using louvered injection schemes. Recirculation patterns were needed to stabilize the heavy central gas when different gases are used.
Results of ongoing experimental studies are reported in which a 125-millimeter-diameter-advanced-bearing test rig simulating an engine sump is being used to find the critical range of conditions for fires to occur. Design, material, and operating concepts and techniques are being studied with the objective of minimizing the problem. It has been found that the vapor temperature near a spark ignitor is most important in determining ignition potential. At temperatures producing oil vapor pressures below or much above the calculated flammability limits, fires have not been ignited. But fires have been routinely started within the theoretical flammability range. This indicates that generalizing the sump-fire problem may make it amenable to analysis, with the potential for realistic solutions.
Modern land management faces unprecedented uncertainty regarding future climates, novel disturbance regimes, and unanticipated ecological feedbacks. Mitigating this uncertainty requires a cohesive landscape management strategy that utilizes multiple methods to optimize benefits while hedging risks amidst uncertain futures. We used a process-based landscape simulation model (LANDIS-II) to forecast forest management, growth, climate effects, and future wildfire dynamics, and we distilled results using a decision support tool allowing us to examine tradeoffs between alternative management strategies. We developed plausible future management scenarios based on factorial combinations of restoration-oriented thinning prescriptions, prescribed fire, and wildland fire use. Results were assessed continuously for a 100-year simulation period, which provided a unique assessment of tradeoffs and benefits among seven primary topics representing social, ecological, and economic aspects of resilience. Projected climatic changes had a substantial impact on modeled wildfire activity. In the Wildfire Only scenario (no treatments, but including active wildfire and climate change), we observed an upwards inflection point in area burned around mid-century (2060) that had detrimental impacts on total landscape carbon storage. While simulated mechanical treatments (~ 3% area per year) reduced the incidence of high-severity fire, it did not eliminate this inflection completely. Scenarios involving wildland fire use resulted in greater reductions in high-severity fire and a more linear trend in cumulative area burned. Mechanical treatments were beneficial for subtopics under the economic topic given their positive financial return on investment, while wildland fire use scenarios were better for ecological subtopics, primarily due to a greater reduction in high-severity fire. Benefits among the social subtopics were mixed, reflecting the inevitability of tradeoffs in landscapes that we rely on for diverse and countervailing ecosystem services. This study provides evidence that optimal future scenarios will involve a mix of active and passive management strategies, allowing different management tactics to coexist within and among ownerships classes. Our results also emphasize the importance of wildfire management decisions as central to building more robust and resilient future landscapes.
The first NASA Space Shuttle flight (STS-1) produced an overpressure wave that exceeded preflight predictions by as much as 5 to 1. This second overpressure wave occurred just after the solid rocket booster (SRB) igniter wave. To understand this overpressure phenomenon, a numerical simulation effort was undertaken. Both the SRB static firing test and STS-1 geometries were studied for two-dimensional, inviscid and viscous flow. The inviscid calculations did not produce significant second overpressure waves. However, the viscous calculations did produce second overpressure waves that qualitatively agree with experiment. These overpressure waves were present in both the static firing test and STS-1 geometries. This second overpressure wave is generated by the motion of the boundary layer separation point and the subsequent radial motion of the exhaust jet during the start-up of the SRB nozzle flow. The presence of the mobile launch platform exhaust hole wale amplifies this wave, but does not appear to be the source of any additional overpressure waves. The lack of good quantitative agreement between theory and experiment indicates that other overpressure sources, not accounted for by this simulation, may be present.
This report presents analyses of the AB7 ABCOVE sodium spray fire experiment with the MELCOR code. This code simulates the progression of accident events for analysis and auditing purposes of nuclear facilities during accident conditions. Historically, the ABCOVE experiments have contributed to the validation of aerosol physics and related phenomena. Given advancements in sodium-cooled reactor designs, characterization of the sodium spray combustion may further the review and validation of newly incorporated sodium properties and physics packages, namely, the sodium equations of state (EOS) and the sodium combustion (NAC) package within MELCOR. Previously, the AB5 and AB6 experiments were analyzed with and without the NAC package. This work builds on the previous analyses with a demonstration of the current code capabilities of MELCOR with a more mild Na spray and pool fire scenario.
A viewgraph presentation outlines the effects of AEA cell bypass-switch closure on a charged EOS-Aqua NiH2 cell. The objectives of the presentation are to: (1) Verify the Performance of AEA Cell Bypass Protection Device (CBPD) under simulated EOS-Aqua/Aura flight hardware configuration; (2) Assess the safety of the hardware under an inadvertent firing of CBPD switch, as well as the closing of CBPD switch under simulated high cell impedance; and (3) Confirm that the mode of operation of CBPD switch is the formation of a continuous low impedance path-homogeneous low melting point eutectic (Indium alloy). Details are given on the EOS-Aqua flight hardware, AEA hardware tested, AEA bypass switch schematic, and the tests performed, which include images of equipment and results.
The objectives are to: (1) Verify the Performance of AEA Cell Bypass Protection Device (CBPD) under simulated EOS-Aqua/Aura flight hardware configuration; (2) Assess the Safety of the hardware under an inadvertent firing of CBPD switch, as well as the closing of CBPD switch under simulated high cell impedance; and (3) Confirm that the mode of operation of CBPD switch is the formation of a continuous low impedance path (a homogeneous low melting point alloy).
Report describes electronic circuitry that simulates electrical properties of igniter of Space Shuttle main engine. Circuit used to test software of engine controller, without having to fire real igniter or turn on engine. Circuit used in all igniter simulations and mimics operation of igniter more realistically than did previous versions.
Abstract Wetlands are critical terrestrial ecosystems in Alaska, covering ~177,000 km 2 , an area greater than all the wetlands in the remainder of the United States. To assess the relative influence of changing climate, atmospheric carbon dioxide (CO 2 ) concentration, and fire regime on carbon balance in wetland ecosystems of Alaska, a modeling framework that incorporates a fire disturbance model and two biogeochemical models was used. Spatially explicit simulations were conducted at 1‐km resolution for the historical period (1950–2009) and future projection period (2010–2099). Simulations estimated that wetland ecosystems of Alaska lost 175 Tg carbon (C) in the historical period. Ecosystem C storage in 2009 was 5,556 Tg, with 89% of the C stored in soils. The estimated loss of C as CO 2 and biogenic methane (CH 4 ) emissions resulted in wetlands of Alaska increasing the greenhouse gas forcing of climate warming. Simulations for the projection period were conducted for six climate change scenarios constructed from two climate models forced under three CO 2 emission scenarios. Ecosystem C storage averaged among climate scenarios increased 3.94 Tg C/yr by 2099, with variability among the simulations ranging from 2.02 to 4.42 Tg C/yr. These increases were driven primarily by increases in net primary production (NPP) that were greater than losses from increased decomposition and fire. The NPP increase was driven by CO 2 fertilization (~5% per 100 parts per million by volume increase) and by increases in air temperature (~1% per °C increase). Increases in air temperature were estimated to be the primary cause for a projected 47.7% mean increase in biogenic CH 4 emissions among the simulations (~15% per °C increase). Ecosystem CO 2 sequestration offset the increase in CH 4 emissions during the 21st century to decrease the greenhouse gas forcing of climate warming. However, beyond 2100, we expect that this forcing will ultimately increase as wetland ecosystems transition from being a sink to a source of atmospheric CO 2 because of (1) decreasing sensitivity of NPP to increasing atmospheric CO 2 , (2) increasing availability of soil C for decomposition as permafrost thaws, and (3) continued positive sensitivity of biogenic CH 4 emissions to increases in soil temperature.
This paper describes the use of targeted Loci/CHEM CFD simulations to evaluate the effects of a dual-engine first-stage hot-fire test on an evolving integrated launch pad/test article design. This effort was undertaken as a part of the NESC Independent Assessment of the Taurus II Stage Test Series. The underlying conceptual model included development of a series of computational models and simulations to analyze the plume induced environments on the pad, facility structures and test article. A pathfinder simulation was first developed, capable of providing quick-turn around evaluation of plume impingement pressures on the flame deflector. Results from this simulation were available in time to provide data for an ongoing structural assessment of the deflector. The resulting recommendation was available in a timely manner and was incorporated into construction schedule for the new launch stand under construction at Wallops Flight Facility. A series of Reynolds-Averaged Navier-Stokes (RANS) quasi-steady simulations representative of various key elements of the test profile was performed to identify potential concerns with the test configuration and test profile. As required, unsteady Hybrid-RANS/LES simulations were performed, to provide additional insight into critical aspects of the test sequence. Modifications to the test-specific hardware and facility structures thermal protection as well as modifications to the planned hot-fire test profile were implemented based on these simulation results.