Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geometric Transformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Plasma-assisted manipulation of vanadia nanoclusters for efficient selective catalytic reduction of NO x

Supported nanoclusters (SNCs) with distinct geometric and electronic structures have garnered significant attention in the field of heterogeneous catalysis. However, their directed synthesis remains a challenge due to limited efficient approaches. This study presents a plasma-assisted treatment strategy to achieve supported metal oxide nanoclusters from a rapid transformation of monomeric dispersed metal oxides. As a case study, oligomeric vanadia-dominated surface sites were derived from the classic supported V 2 O 5 -WO 3 /TiO 2 (VWT) catalyst and showed nearly an order of magnitude increase in turnover frequency (TOF) value via an H 2 -plasma treatment for selective catalytic reduction of NO with NH 3 . Such oligomeric surface VO x sites were not only successfully observed and firstly distinguished from WO x and TiO 2 by advanced electron microscopy, but also facilitated the generation of surface amide and nitrates intermediates that enable barrier-less steps in the SCR reaction as observed by modulation excitation spectroscopy technologies and predicted DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Free (Reactionless) Torque Generation - Or Free Propulsion Concept

The basic principle in Newtonian Mechanics is based upon equal and opposite forces. Placing the vectors of velocity, acceleration, force and momentum of interacting objects along a single line satisfies the claim it is a linear or a 1-D concept. Classical Mechanics states that there are two main kinds of motion, linear and angular motion. Similarly placing the vectors of angular velocity, angular acceleration, torque and angular momentum along a line in the case of rotation in fact brings a plane 2-D interaction to the well known 1-D Newtonian concept. This adaptation transforms Classical Mechanics into a 1-D concept as well and presents a conformation that the linear concept is the only possible one. The Laws of Conservation of Momentum and Angular Momentum are results of the 1-D concept. But the world contains 3 geometrical spatial dimensions. Within the 3-D world there can exist 1-D, 2-D and 3-D kinds of interaction. The question is how to believe that the 3-D world can really be composed of a 1-D interaction or interactions made equal to the 1-D concept only? Examine a gyroscope - the only one mechanical device that is capable of performing 3-D behavior. The problem is that a gyroscope cannot perform three permanent and unidirectional torques that are fixed in space acting about perpendicular axes. This impossibility conforms to a 1-D concept. The idea is to find a solution that can be achieved for the 3-D concept.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigations related to the inviscid-viscous interaction in transonic flows about finite 3-D wings

Inviscid small-disturbance theory has been shown to predict three-dimensional transonic flows about finite wings reasonably well as long as viscous effects are negligible. In order to include these effects, the inviscid small-disturbance solution of Bailey and Ballhaus (1975) has been combined with a finite-difference solution for Prandtl's boundary-layer equations. This solution employs the conditionally stable Krause (1968) scheme, implicit in the direction normal to the wall, to cope with the domain-of-dependence problem that arises for reverse cross flow. To be consistent with the inviscid-flow solution, the boundary layer is computed in the representative wing planform plane which is transformed into rectangular shape in the computational domain. The flow has been assumed turbulent, and a scalar eddy-viscosity model is adopted. The interaction between inviscid and viscous flow is modeled with the help of the displacement surface which is added to the geometric wing shape. Sample distributions of displacement thickness for swept wings are presented for weak and strong interaction cases.

Kordulla, W.↗

Development of a precision, six-axis laboratory dynamometer

This paper describes the design, fabrication, test, and operation of a unique six axis force/torque dynamometer The specimen table used to hold components under test is supported in a full six axis kinematic mount. Support struts fabricated from high strength steel with special integral two axis flexures link the specimen table to the load cell transducers. Realtime force/torque coordinate transform, root mean squared calculation, and data averaging, and color six axis display with controllable scaling are provided by a specially programmed desktop computer. The extensive structural analysis and design optimization required to obtain a stiff, well damped, lightweight structure is described in detail. Geometric optimization of the kinematic mount and fabrication details of the struts are also described.

P. J. Champagne↗

Direct geometric probe of singularities in band structure

A quantum system’s energy landscape may have points where multiple energy surfaces are degenerate and that exhibit singular geometry of the wave function manifold, with major consequences for the system’s properties. Ultracold atoms in optical lattices have been used to indirectly characterize such points in the band structure. Here we measured the non-Abelian transformation produced by transport directly through the singularities. We accelerated atoms along a quasi-momentum trajectory that enters, turns, and then exits the singularities at linear and quadratic band-touching points of a honeycomb lattice. Measurements after transport identified the topological winding numbers of these singularities to be 1 and 2, respectively. Our work introduces a distinct method for probing singularities that enables the study of non-Dirac singularities in ultracold-atom quantum simulators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Soft magnetic alloy embodiments for additive manufacturing and geometric structures formed therefrom

Disclosed herein are embodiments of soft magnetic alloy embodiments for use in additive manufacturing and structures fabricated from such alloys. In some embodiments, the fabricated structures comprise a continuous thin wall (or plurality thereof) having a geometry that promotes reduced eddy current losses and other performance enhancements. In some embodiments, the fabricated structures are used to make components, such as transformer cores and/or electric motors.

Plotkowski, Alexander↗

Extending the Mott–Gurney law to one-dimensional nonplanar diodes using point transformations

Recent studies have applied variational calculus, conformal mapping, and point transformations to generalize the one-dimensional (1D) space-charge limited current density (SCLCD) and electron emission mechanisms to nonplanar geometries; however, these assessments have focused on extending the Child–Langmuir law (CLL) for SCLCD in vacuum. Since the charge in the diode is independent of the coordinate system (i.e., covariant), we apply bijective point transformations to extend the Mott–Gurney law (MGL) for the SCLCD in a collisional or semiconductor gap to nonplanar 1D geometries. This yields a modified MGL that replaces the Cartesian gap distance with a canonical gap distance that may be written generally in terms of geometric scale factors that are known for multiple geometries. We tabulate results for common geometries. Such an approach may be applied to any current density, including non-space-charge limited gaps and SCLCD that may fall between the CLL and MGL.

Garner, Allen L. [Purdue Univ., West Lafayette, IN↗

Particle interspacing effects on the mechanical behavior of a Fe–TiB 2 metal matrix composite using FFT-based mesoscopic field dislocation mechanics

This paper presents an application to metal matrix composites (MMCs) of an enhanced elasto-viscoplastic Fast Fourier Transform (EVP-FFT) formulation coupled with a phenomenological continuum Mesoscale Field Dislocation Mechanics (MFDM) theory. Contrary to conventional crystal plasticity, which only accounts for plastic flow and hardening induced by statistically stored dislocations (SSDs), MFDM-EVP-FFT also describes the evolution of polarized geometrically necessary dislocation (GND) density and its effect on both plastic flow and hardening. Numerical results for a Fe–TiB 2 MMC made of a ferrite matrix (α-Fe) and elastic ceramic particles (TiB 2 ) are presented. Full-field simulations are performed using synthetic periodic unit cells representative of the MMC, with single-crystalline and polycrystalline matrix, for different particle interspacing distances. A strong dependence of the predicted equivalent stress, cumulated plastic strain and GND density fields with particle interspacing distance is observed, in contrast with conventional crystal plasticity. Correlations between these mechanical fields and microstructural features, and their influence on local and global mechanical behavior are examined for the different MMC microstructures.

42 ENGINEERING↗

The Hamiltonian Structure and Euler-Poincare Formulation of the Valsov-Maxwell and Gyrokinetic System

We present a new variational principle for the gyrokinetic system, similar to the Maxwell-Vlasov action presented in Ref. 1. The variational principle is in the Eulerian frame and based on constrained variations of the phase space fluid velocity and particle distribution function. Using a Legendre transform, we explicitly derive the field theoretic Hamiltonian structure of the system. This is carried out with the Dirac theory of constraints, which is used to construct meaningful brackets from those obtained directly from Euler-Poincare theory. Possible applications of these formulations include continuum geometric integration techniques, large-eddy simulation models and Casimir type stability methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Preliminary Assessment of LANDSAT-4 Thematic Mapper Data

The geometric errors for image to map rectification of one Thematic Mapper (TM) scene of an area near Windsor, Ontario were studied. The scene had been produced on computer compatible tape by NASA and contained radiometric and system corrections for geometric distortions. The geometric properties of TM photographic imagery permitted very good fitting to map detail using simple scaling techniques to localized areas and, using simple scaling, the overall geometry remained with 500 meters or 0.4 mm at the image scale of 1:1,141,600. An affine transformation, permitting differential scaling, slightly improves the fit to about 400 meters or 0.35 mm at image scale. The imagery shows promise of having the needed additional resolution and spectral discrimination to provide map revision information in urban-rural areas where the MSS sensor is considered inadequate. The late-season prairie image, however, did not hold such promise, and judgement must be reserved until images are acquired at other seasons in this particular geographic area.

Goodenough, D. G.↗

Metaplectic geometrical optics for ray-based modeling of caustics: Theory and algorithms

The optimization of radio frequency-wave (RF) systems for fusion experiments is often performed using ray-tracing codes, which rely on the geometrical-optics (GO) approximation. However, GO fails at caustics such as cutoffs and focal points, erroneously predicting the wave intensity to be infinite. This is a critical shortcoming of GO, since the caustic wave intensity is often the quantity of interest, e.g., RF heating. Full-wave modeling can be used instead, but the computational cost limits the speed at which such optimizations can be performed. Here, we have developed a less expensive alternative called metaplectic geometrical optics (MGO). Instead of evolving waves in the usual x (coordinate) or k (spectral) representation, MGO uses a mixed X$\equiv$Ax+Bk representation. By continuously adjusting the matrix coefficients A and B along the rays, one can ensure that GO remains valid in the X coordinates without caustic singularities. The caustic-free result is then mapped back onto the original x space using metaplectic transforms. Here, we overview the MGO theory and review algorithms that will aid the development of an MGO-based ray-tracing code. We show how using orthosymplectic transformations leads to considerable simplifications compared to previously published MGO formulas. We also prove explicitly that MGO exactly reproduces standard GO when evaluated far from caustics (an important property that until now has only been inferred from numerical simulations), and we relate MGO to other semiclassical caustic-removal schemes published in the literature. Finally this discussion is then augmented by an explicit comparison of the computed spectrum for a wave bounded between two cutoffs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Hamiltonian structure and Euler-Poincare formulation of the Vlasov-Maxwell and gyrokinetic systems

We present a new variational principle for the gyrokinetic system, similar to the Maxwell-Vlasov action presented in H. Cendra et al., [J. Math. Phys. 39, 3138 (1998)]. The variational principle is in the Eulerian frame and based on constrained variations of the phase space fluid velocity and particle distribution function. Using a Legendre transform, we explicitly derive the field theoretic Hamiltonian structure of the system. This is carried out with a modified Dirac theory of constraints, which is used to construct meaningful brackets from those obtained directly from Euler-Poincare theory. Possible applications of these formulations include continuum geometric integration techniques, large-eddy simulation models, and Casimir type stability methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Engineering Layer For System Analysis

ELSA offers various utility classes and methods to streamline the definition of regions, materials, and geometries in nuclear simulations. Key features include generating OpenMC regions, managing material properties, and providing convenient abstractions for complex geometrical and physical configurations. Additionally, ELSA supports the creation of submodels, enabling users to build modular and reusable components for their simulations. The codebase also includes robust extrusion and revolution capabilities, facilitating the efficient creation of 3D parametric geometries from 2D profiles through linear and rotational transformations.

Ferney, Paul [Idaho National Laboratory (INL), Ida↗

Permeability of Two Parachute Fabrics - Measurements, Modeling, and Application

Two parachute fabrics, described by Parachute Industry Specifications PIA-C-7020D Type I and PIA-C-44378D Type I, were tested to obtain their permeabilities in air (i.e., flow-through volume of air per area per time) over the range of differential pressures from 0.146 psf (7 Pa) to 25 psf (1197 Pa). Both fabrics met their specification permeabilities at the standard differential pressure of 0.5 inch of water (2.60 psf, 124 Pa). The permeability results were transformed into an effective porosity for use in calculations related to parachutes. Models were created that related the effective porosity to the unit Reynolds number for each of the fabrics. As an application example, these models were used to calculate the total porosities for two geometrically-equivalent subscale Disk-Gap-Band (DGB) parachutes fabricated from each of the two fabrics, and tested at the same operating conditions in a wind tunnel. Using the calculated total porosities and the results of the wind tunnel tests, the drag coefficient of a geometrically-equivalent full-scale DGB operating on Mars was estimated.

Cruz, Juan R.↗

Permeability of Two Parachute Fabrics: Measurements, Modeling, and Application

Two parachute fabrics, described by Parachute Industry Specifications PIA-C-7020D Type I and PIA-C-44378D Type I, were tested to obtain their permeabilities in air (i.e., flow-through volume of air per area per time) over the range of differential pressures from 0.146 psf (7 Pa) to 25 psf (1197 Pa). Both fabrics met their specification permeabilities at the standard differential pressure of 0.5 inch of water (2.60 psf, 124 Pa). The permeability results were transformed into an effective porosity for use in calculations related to parachutes. Models were created that related the effective porosity to the unit Reynolds number for each of the fabrics. As an application example, these models were used to calculate the total porosities for two geometrically-equivalent subscale Disk-Gap-Band (DGB) parachutes fabricated from each of the two fabrics, and tested at the same operating conditions in a wind tunnel. Using the calculated total porosities and the results of the wind tunnel tests, the drag coefficient of a geometrically-equivalent full-scale DGB operating on Mars was estimated.

Cruz, Juan R.↗

The O(N) S-matrix monolith

We consider the scattering matrices of massive quantum field theories with no bound states and a global O(N) symmetry in two spacetime dimensions. In particular we explore the space of two-to-two S-matrices of particles of mass m transforming in the vector representation as restricted by the general conditions of unitarity, crossing, analyticity and O(N) symmetry. We found a rich structure in that space by using convex maximization and in particular its convex dual minimization problem. At the boundary of the allowed space special geometric points such as vertices were found to correspond to integrable models. The dual convex minimization problem provides a novel and useful approach to the problem allowing, for example, to prove that generically the S-matrices so obtained saturate unitarity and, insome cases, that they are at vertices of the allowed space.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Amplitude equations for polycrystalline materials with interaction between composition and stress

Here, we investigate the ability of frame-invariant amplitude equations [G. H. Gunaratne, Q. Ouyang, and H. Swinney, Phys. Rev. E 50, 2802 (1994)] to describe quantitatively the evolution of polycrystalline microstructures and we extend this approach to include the interaction between composition and stress. Validations for elemental materials include studies of the Asaro-Tiller-Grinfeld morphological instability of a stressed crystal surface, polycrystalline growth from the melt, grain-boundary energies over a wide range of misorientation, and grain-boundary motion coupled to shear deformation. Amplitude equations with accelerated strain relaxation in the solid are shown to model accurately the Asaro-Tiller-Grinfeld instability. Polycrystalline growth is also well described. However, the survey of grain-boundary energies shows that the approach is only valid for a restricted range of misorientations as a direct consequence of an amplitude expansion. This range covers approximately half the complete range allowed by crystal symmetry for some fixed reference set of density waves used in the expansion. Over this range, coupled motion to shear is well described by known geometrical rules and a transition from coupling to sliding motion is also reproduced. Amplitude equations for alloys are derived phenomenologically in a Ginzburg-Landau spirit. Vegard’s law is shown to be naturally described by seeking a gauge-invariant form of those equations under a transformation that corresponds to a lattice expansion and deviations from Vegard’s law can be easily incorporated. Those equations realistically describe the dilute alloy limit and have the same flexibility as conventional phase-field models for incorporating arbitrary free-energy/composition curves. As a test of this approach, we recover known analytical expressions for open-system elastic constants [F. C. Larché and J. W. Cahn, Acta Metall. 33, 331 (1985)].

36 MATERIALS SCIENCE↗

Affine transformations from aerial photos to computer compatible tapes

During the development of a project to estimate wheat production, it became necessary to pull data, corresponding to particular fields in a test site, off an ERTS computer compatible tape. Aerial photographs and topographic maps were on hand for the test site. A method was devised, using an affine transformation, to relate the aerial photographs or topographic maps to the tapes. One can thereby access data on the tape corresponding to regions covered by only a few pixels. The theory can be used for the registration of two tapes for the same area and for the geometric correction of images.

Peet, F. G.↗