SEARCH · Search NASA

Results for “HIGH VACUUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Study of the gas contents of rocks: An approach to the evolution of atmospheres on the earth and planets

A high vacuum system was built for extracting volatiles from rocks either by heating or crushing, and preliminary analyses of the volatiles were made for selected terrestrial basalts and granites. The apparatus and experimental procedures are described, and the major problems associated with water measurement and choice of argon to replace neon as the internal standard are discussed. Preliminary analyses of granites and basalts indicate the following: All analyses lie in the H2O-CO2-CO triangle on a C-H-O ternary diagram. The compositions of the volatiles plot in distinct, but overlapping, areas of the C-H-O diagram. Pre-Cambrian granites have a higher volatile content than younger granites. Continental basalts have a higher volatile content than oceanic basalts.

Barker, C.↗

NASA NTRS1972

Potassium permanganate for mercury vapor environmental control

Potassium permanganate (KMnO4) was evaluated for application in removing mercury vapor from exhaust air systems. The KMnO4 may be used in water solution with a liquid spray scrubber system or as a solid adsorber bed material when impregnated onto a zeolite. Air samples contaminated with as much as 112 mg/cu m of mercury were scrubbed to 0.06mg/cum with the KMnO4-impregnated zeolite (molecular sieve material). The water spray solution of permanganate was also found to be as effective as the impregnated zeolite. The KMnO4-impregnated zeolite was applied as a solid adsorber material to (1) a hardware decontamination system, (2) a model incinerator, and (3) a high vacuum chamber for ion engine testing with mercury as the propellant. A liquid scrubber system was also applied in an incinerator system. Based on the results of these experiments, it is concluded that the use of KMnO4 can be an effective method for controlling noxious mercury vapor.

Kuivinen, D. E.↗

NASA NTRS1972

Determination of work functions near melting points of refractory metals by using a direct-current arc

Effective work functions of refractory metals at temperatures near their melting points were determined by using a direct-current arc. A metal wire connected as the cathode was melted by striking an arc discharge in an argon atmosphere. A melted sphere was formed with a definite emitting area which was calculated from the sphere diameter measured after terminating the arc. Effective work functions were calculated from the Richardson-Dushman equation by using this emission area. The procedure is experimentally advantageous because surface cleanliness of the specimen is not critical, high vacuum is not required, and the anode-cathode spacing is not critical.

Gordon, W. A.↗

NASA NTRS1971

Differential thermal analysis and gas release studies of Apollo 11 samples.

The liquidus-solidus behavior of Apollo 11 lunar fines and the evolution characteristics of CO, nitrogen, He, Ne, and Ar were investigated by use of the combined techniques of high-vacuum differential thermal analysis (DTA) and mass spectrometry between 100 and 1500 C. The DTA thermogram has shown that the lunar fines undergo partial melting over a broad range of temperature from about 915 to 1300 C, with a significant initial melting of glassy and crystalline components within the fines at about 1140 C. The lunar material becomes a homogeneous melt at about 1300 C.

Wachi, F. M.↗

NASA NTRS1972

Plastic set of smooth large radii of curvature thermal conductance specimens at light loads.

Thermal contact conductance test data at high vacuum were obtained from two Armco iron specimens having smooth, large radii of curvature, convex, one-half wave length surfaces. The data are compared with calculations based on two macroscopic elastic deformation theories and an empirical expression. Major disagreement with the theories and fair agreement with the empirical expression resulted. Plastic deformation of all the contacting surfaces was verified from surface analyzer statistics. These results indicate that the theoretical assumption of macroscopic elastic deformation is inadequate for accurate prediction of heat transfer with light loads for Armco iron specimens similar to those used in this investigation.

Mckinzie, D. J., Jr.↗

NASA NTRS1972

Investigation of a possible solar-wind darkening of the lunar surface by photoelectron spectroscopy.

Detailed sequential study by photoelectron spectroscopy of the change in valence states of iron in Fe2O3, Fe3O4, FeO, and Fe foil samples, showing that chemical reduction does take place on the sample surface when argon ion bombardment occurs. These spectra give evidence that, after prolonged ion bombardment, the surface of all four samples consisted predominantly of iron in the metallic state. Argon ion sputtering of 15 silicate and oxide samples under similar experimental conditions produced surface darkening only in samples containing iron. Monitoring of the photoelectron peak of carbon during the experiment indicates that ion-bombardment darkening is not due to the buildup of hydrocarbon surface contaminants in the oil-free high-vacuum system used by the authors. On the basis of these studies, it is concluded that solar-wind bombardment should be included as one of the possible mechanisms for producing darkening of the lunar surface.

Yin, L. I.↗

NASA NTRS1972

Superconducting properties of annealed Nb-Al-Ge thin films.

Discussion of the superconducting transition temperature and other superconducting properties of annealed Nb-Al-Ge thin films which were prepared by sputtering from a 3Nb-0.8Al-0.2Ge cathode. Annealing was performed in a high-vacuum environment maintained at 10 to the minus 9th torr or less, for times and temperatures near the optimum conditions for bulk Nb-Al-Ge. Films with transition temperatures from 12 to 16 K were annealed and in all cases a rise in transition temperature was observed, with the maximum value obtained thus far being 17.5 K. The current carrying capacity values, already substantially higher for unannealed thin films than for the bulk, were raised even further in the annealed samples, indicating that annealing has no detrimental effects on the flux pinning in these films.

Janocko, M. A.↗

NASA NTRS1973

Thick silicon growth techniques

Hall mobility measurements on a number of single crystal silicon ribbons grown from graphite dies have shown some ribbons to have mobilities consistent with their resistivities. The behavior of other ribbons appears to be explained by the introduction of impurities of the opposite sign. Growth of a small single crystal silicon ribbon has been achieved from a beryllia dia. Residual internal stresses of the order of 7 to 18,000 psi have been determined to exist in some silicon ribbon, particularly those grown at rates in excess of 1 in./min. Growth experiments have continued toward definition of a configuration and parameters to provide a reasonable yield of single crystal ribbons. High vacuum outgassing of graphite dies and evacuation and backfilling of growth chambers have provided significant improvements in surface quality of ribbons grown from graphite dies.

Bates, H. E.↗

NASA NTRS1973

Molecular flux measurements in the back flow region of a nozzle plume

A series of tests were conducted to measure the mass flux in the far field of a nozzle plume in a high vacuum with emphasis on the back flow region. The measurements presented provided fairly accurate data for off-axis angles as large as 140 deg (i.e., in the back flow region). This region, since it is well behind the exit plane, is of paticular interest to those concerned with instrument contamination. Usually sensitive spacecraft surfaces are located in the region affected by the back flow. Parameters such as expansion ratio, throat diameter, nozzle lip shape, and plenum (chamber) pressure were varied, carbon dioxide and nitrogen gases were flowed and mass flux measurements were taken using quartz crystal microbalances in as many as nine different locations relative to the tests nozzle. Several conclusions with respect to the effect of nozzle and gas parameters on the amount of back flow mass flux are offered, and it was demonstrated that gaseous mass fluxes, which are not predictable by present theories, are encountered in the region behind the nozzle exit plane. This knowledge is significant if materials incompatible with the gaseous exhaust products are used in this region.

Chirivella, J. E.↗

NASA NTRS1973

Electrical properties of dry rocks

The mechanism by which atmospheric moisture affects the conductivity and dielectric constant of rock specimens was studied in time and frequency domains. It is suggested that adsorbed water molecules alter the surface conductivity in a manner similar to that observed in semiconductors and insulators. Powdered basalts show a low-frequency dispersion produced by the atmospheric moisture remaining in the pore system of the sample in a high vacuum; this effect is attributed to isolated adsorption centers. Simulated lunar permafrost at 100 K and a vacuum of 10 to the -8th power torr together with data on lunar samples contaminated with atmospheric moisture and the dielectric properties of ice at various temperatures indicate that, if permafrost exists in the moon it should present a relaxation peak at approximately 300 Hz; for temperatures up to 263 K it may go up to 20 KHz. It is concluded that in order to have electrical steady state conditions in rock samples it is necessary to have volume charge accumulations at interfaces within the sample and at the electrode sample interface. A method for measuring heterogeneous dielectrics with non-negligible ohmic and dielectric conductivities is proposed and experimentally verified.

Morrison, H.↗

NASA NTRS1972

An application of a space technique for pollution detection.

Description of the hazardous gas detection system (HGDS) used during Apollo-Saturn launch tests for identifying and analyzing extremely minute amounts of gases escaping during cryogenic loading. These gases included hydrogen, helium, nitrogen, oxygen, nitrogen tetroxide, and hydrazine N2H3 radical. The heart of the HGDS is a mass spectrometer operating under high vacuum and capable to measure both qualitatively and quantitatively the presence and percentage of any gas whose molecular weight is between 2 and 150 atomic mass units. It is suggested that such a system could be utilized to detect environmental pollutants.

Hall, J. J.↗

NASA NTRS1972

Elastic velocity and Q factor measurements on Apollo 12, 14, and 15 rocks.

The Rayleigh wave velocities (vR) in one Apollo 12, one Apollo 15, and two Apollo 14 rocks were measured by the impulse technique. For 14310 vR = 1.20 km/sec; for 14321 vR = 0.9 km/sec; for 12063, on which the orientation dependence was studied, vR = 1.16-1.59 km/sec; for 15555 vR = 0.32 km/sec; and for synthetic rock 10017 analogue vR = 2.26 km/sec. This represents a larger spread by a factor of 3 than previously reported on lunar igneous rock. Absolute Q factor measurements were performed on one Apollo 14 rock by the vibrating bar technique. Under exposure to high vacuum and low temperatures, the Q factor is shown to increase towards values approaching the low end of the range of estimates from seismic data.

Tittmann, B. R.↗

NASA NTRS1972

Vaporization and compatibility of SiGe radioisotope thermoelectric generators.

The limiting operating temperatures of SiGe thermoelectrics designed for extended operation are set by sublimation process of the elements and by considerations of their compatibility with the surrounding insulating elements. Mass spectrometric Knudsen cell and Langmuir vaporization modes of operation have been utilized in the study of the equilibrium vapor species and in the time evaluation of the sublimation process. Isothermal high-vacuum (1 ntorr) anneals of samples have extended observations to long-time spans. The time variations follow the formation of surface depletion layers due to disproportional rates of sublimation of the various species.

Staley, H. G.↗

NASA NTRS1973

Mass flux measurements and correlations in the back flow region of a nozzle plume.

A series of tests were conducted to measure the mass flux in the far field of a nozzle plume in a high vacuum with emphasis on the back flow region. The measurements presented in this report provide fairly accurate data for off-axis angles as large as 140 deg (i.e., the back flow region). The tests utilized five different nozzles. Parameters such as expansion ratio, throat diameter, nozzle lip shape, and plenum (chamber) pressure were varied. Carbon dioxide and nitrogen gases were passed through, and mass flux measurements were taken using quartz crystal microbalances in as many as nine different locations relative to the test nozzle. The tests resulted in a large matrix of data that were correlated and compared to existing prediction theories. Several conclusions with respect to the effect of nozzle and gas parameters on the amount of back flow mass flux are offered, and it was demonstrated that gaseous mass fluxes, which are not predictable by present theories, are encountered in the region behind the nozzle exit plane.

Chirivella, J. E.↗

NASA NTRS1973

Radiative property degradation of water impinging on thermally-controlled surfaces under space conditions.

Review of the results of an investigation aimed at determining experimentally the directional monochromatic reflectance changes caused under high-vacuum space conditions by a water spray impinging on thermally controlled surfaces consisting of three paint specimens (Z93, S13G, and 92-007) and an aluminum foil. The first two paints and the aluminum foil suffered considerable physical damage, but only small changes resulted in the reflectance of the paints while the reflectance of the aluminum foil decreased with increase in exposure time to the water jet. Only the 92-007 Dow Corning paint retained the same physical and reflective characteristics.

Maples, D.↗

NASA NTRS1973

Determination of work functions near melting points of refractory metals by using a direct-current arc.

A direct-current arc in argon at atmospheric pressure was used to determine effective work functions of refractory metals, including tantalum, tungsten, molybdenum, and niobium. The procedure is experimentally advantageous, because surface cleanliness of the specimen is not critical, high vacuum is not required, and the anode-cathode spacing is not critical. The experimental procedure involves striking an arc to a metal wire cathode to form a melted ball having an emitting area defined by its diameter. The literature melting point of the metal is taken as the emitting temperature. By using these parameters and the known arc current, effective work functions were calculated from the Richardson-Dushman equation. The calculated work functions agree with recommended handbook values to within about 0.1 V and have typical repeatabilities of 0.02 V.

Gordon, W. A.↗

NASA NTRS1973

Polyurethane retainers for ball bearings

Evaluation of a new ball bearing retainer material is reported. A special composite polyurethane foam ball retainer has been developed that has virtually zero wear, is chemically inert to hydrocarbon lubricants, and stores up to 60 times as much lubricant per unit volume as the most commonly used retainer material, cotton phenolic. This new retainer concept shows promise of years of ball bearing operation without reoiling, based on life testing in high vacuum.

Christy, R. I.↗

NASA NTRS1973

Lightweight tire concept for space shuttle

Various tests were conducted on a 49x17/26 PR aircraft tire that had been designed as a lightweight tire for use on the C-5A military transport. This tire is approximately 25 per cent lighter than a tire of the same size and ply rating that would be used in commercial airline service. The tires were tested at 40 per cent, 37 per cent, and 35 per cent deflections. These deflections were obtained by adjusting the inflation pressure while the load on the tire remained constant at 60,000 pounds. It was determined that the tire would operate successfully under the test conditions at 35% deflection. Prior to testing, the tires were subjected to conditions of high vacuum and low temperature. It was determined that the tires were not adversely affected by these conditions.

Shufflebotham, W. T.↗