Luna 9 pictures - Implications.
Photographic evidence from Luna IX indicating Moon may have surface made up largely of fine rock particles
ROCK↗
SEARCH · Search NASA
Results for “LUNAR PHOTOGRAPH”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Geology of the Apollo 14 landing site.
Apollo 14 landed in the Fra Mauro region of the moon, within about 1,100 m of a 90 m high ridge of the Fra Mauro formation, interpreted as being ejecta from the Imbrium Basin. The primary geologic objective of the mission was to sample ejecta from Cone Crater, which is 340 m in diameter and penetrates at least 60 m into the ridge. Data from the mission strongly support the Imbrian ejecta origin for the Fra Mauro formation. Returned samples and photographs show that ejecta from Cone Crater is composed of composite breccias that include multiple clasts of still older, pre-Imbrian, breccias. Cone Crater ejecta displays a wide range of thermal metamorphism effects. Samples from the valley where the Lunar Module landed, which was not on a recognizable ray of ejecta from Cone Crater, are predominantly fines and poorly consolidated breccias formed by the disintegration of Fra Mauro rocks and probably are not volcanic rocks as had been postulated before the mission.
Sutton, R. L.↗
Flight Operations reunion for the Apollo 11 20th anniversary of the first manned lunar landing
The following major areas are presented: (1) the Apollo years; (2) official flight control manning list for Apollo 11; (3) original mission control emblem; (4) foundations of flight control; (5) Apollo-11 20th anniversary program and events; (6) Apollo 11 mission operations team certificate; (7) Apollo 11 mission summary (timeline); and (8) Apollo flight control team photographs and biographies.
Source record↗
Estimating Lunar Pyroclastic Deposit Depth from Imaging Radar Data: Applications to Lunar Resource Assessment
Lunar pyroclastic deposits represent one of the primary anticipated sources of raw materials for future human settlements. These deposits are fine-grained volcanic debris layers produced by explosive volcanism contemporaneous with the early stage of mare infilling. There are several large regional pyroclastic units on the Moon (for example, the Aristarchus Plateau, Rima Bode, and Sulpicius Gallus formations), and numerous localized examples, which often occur as dark-halo deposits around endogenic craters (such as in the floor of Alphonsus Crater). Several regional pyroclastic deposits were studied with spectral reflectance techniques: the Aristarchus Plateau materials were found to be a relatively homogeneous blanket of iron-rich glasses. One such deposit was sampled at the Apollo 17 landing site, and was found to have ferrous oxide and titanium dioxide contents of 12 percent and 5 percent, respectively. While the areal extent of these deposits is relatively well defined from orbital photographs, their depths have been constrained only by a few studies of partially filled impact craters and by imaging radar data. A model for radar backscatter from mantled units applicable to both 70-cm and 12.6-cm wavelength radar data is presented. Depth estimates from such radar observations may be useful in planning future utilization of lunar pyroclastic deposits.
Campbell, B. A.↗
Summary of scientific results
The major scientific results of the Apollo 15 flight are summarized. The objectives of the flight are given as: (1) to carry out extensive geological exploration, comprehensive sampling, and photographic documentation of the Apennine Front at Hadley Delta, Hadley Rille, and the mare plain, (2) to emplace the ALSEP near the landing site, and (3) to perform a series of survey experiments with the scientific instrument module (SIM) equipment from lunar orbit and during transearth coast.
Allen, J. P.↗
An analysis of the moon's surface using reflected illumination from the earth during a waning crescent lunar phase
There have been many articles written concerning the lunar after-glow, the spectacular reflection from the moon's surface, and the possible observation of luminescence on the dark side of the moon. The researcher, using a 600 mm cassegrain telescope lense and Kodak 400 ASA T-Max film, photographed the crescent moon whose dark side was clearly visible by the reflected light from earth. The film was digitized to a Perkin-Elmer 1010M microdensitometer for enhancement and enlargement. The resulting pictures indicate a completely different land pattern formation than observed during a full moon. An attempt is made to analyze the observed structures and to compare them to the pictures observed during the normal full moon. There are boundaries on the digitized dark section of the moon that can be identified with structures seen during the normal full moon. But, these variations do change considerably under enhancement.
Hammond, Ernest C., Jr.↗
Solar flare activity - Evidence for large-scale changes in the past
An analysis of radar and photographic meteor data and of spacecraft meteoroid-penetration data indicates that there probably has not been a large increase in meteoroid impact rates in the last 10,000 yr. The solar-flare tracks observed in the glass linings of meteoroid impact pits on lunar rock 15205 are therefore reanalyzed assuming a meteoroid flux that is constant in time. Based on this assumption, the data suggest that the production rate of Fe-group solar-flare tracks may have varied by as much as a factor of 50 on a time scale of about 10,000 yr. No independently obtained data are known to require conflict with this interpretation. Confidence in this conclusion is somewhat qualified by the experimental and analytical uncertainties involved, but the conclusion nevertheless remains the present 'best' explanation for the observed data trends.
Zook, H. A.↗
Applied photo interpretation for airbrush cartography
New techniques of cartographic portrayal have been developed for the compilation of maps of lunar and planetary surfaces. Conventional photo interpretation methods utilizing size, shape, shadow, tone, pattern, and texture are applied to computer processed satellite television images. The variety of the image data allows the illustrator to interpret image details by inter-comparison and intra-comparison of photographs. Comparative judgements are affected by illumination, resolution, variations in surface coloration, and transmission or processing artifacts. The validity of the interpretation process is tested by making a representational drawing by an airbrush portrayal technique. Production controls insure the consistency of a map series. Photo interpretive cartographic portrayal skills are used to prepare two kinds of map series and are adaptable to map products of different kinds and purposes.
Inge, J. L.↗
Spacecraft orientation and exposure to environment, Appendix A
Material removed from the spacecraft and returned to earth remained on the lunar surface for 31.9 lunations. None of the returned parts received the maximum 10,686 hours of exposure because of shadowing by the planar array antenna, solar panel, thermal control compartments, or other parts of the spacecraft. To determine the actual exposure of specific parts to sunlight, six series of photographs were taken. A one-fifth-scale model spacecraft was oriented to a collimated light source simulating the orientation of Surveyor with the sun. Three cameras were set up to view different parts of the spacecraft. The data obtained from these photographs permitted an evaluation of the effects of exposure to solar radiation on the camera and its parts, the surface sampling scoop, and the strut from the radar altimeter and Doppler velocity sensor.
Nickle, N. L.↗
Correction and Geological Analysis of Lunar 3.8 Cm Radar Data
Earth based radar observations of the Moon have been taken at many wavelengths during the last ten years -- at 3.8, 70 cm, and most recently, 7.5 cm. Radar returns have been collected in both polarized and depolarized form so that is possible to derive both topographic and local surface roughness from the data. Until recently, work with 3.8 cm radar data had consisted of qualitative correlation of photographic and thermal IR data with individual depolarized radar data frames (local surface roughness) at different wavelengths. These studies provided results which demonstrated that the relationships between surface roughness (measured by either thermal emission or radar reflectivity) at different wavelengths can be used as an index of a crater's state of degradation (age). However, systematic studies of craters, or other local terrain features, as well as regional or global studies of major terrains (involving a number of data frames), cannot be done until individual frames are calibrated, geometric distortion is removed, and corrected frames are mosaicked.
Clark, P. E.↗
Constraining the Mean Crustal Thickness on Mercury
The topography of Mercury is poorly known, with only limited radar and stereo coverage available. However, radar profiles reveal topographic contrasts of several kilometers over wavelengths of approximately 1000 km. The bulk of Mercury's geologic activity took place within the first 1 Ga of the planet's history), and it is therefore likely that these topographic features derive from this period. On Earth, long wavelength topographic features are supported either convectively, or through some combination of isostasy and flexure. Photographic images show no evidence for plume-like features, nor for plate tectonics; I therefore assume that neither convective support nor Pratt isostasy are operating. The composition and structure of the crust of Mercury are almost unknown. The reflectance spectrum of the surface of Mercury is similar to that of the lunar highlands, which are predominantly plagioclase. Anderson et al. used the observed center-of-mass center-of-figure offset together with an assumption of Airy isostasy to infer a crustal thickness of 100-300 km. Based on tidal despinning arguments, the early elastic thickness (T(sub e)) of the (unfractured) lithosphere was approximately equal to or less than 100 km. Thrust faults with lengths of up to 500 km and ages of about 4 Ga B.P. are known to exist on Mercury. Assuming a semicircular slip distribution and a typical thrust fault angle of 10 degrees, the likely vertical depth to the base of these faults is about 45 km. More sophisticated modelling gives similar or slightly smaller answers. The depth to the base of faulting and the elastic layer are usually similar on Earth, and both are thought to be thermally controlled. Assuming that the characteristic temperature is about 750 K, the observed fault depth implies that the heat flux at 4 Ga B.P. is unlikely to be less than 20 mW m(exp -2) for a linear temperature gradient. For an elastic thickness of 45 km, topography at 1000 km wavelength is likely to be about 60% compensated. There are thus likely to be considerable lateral variations in crustal thickness. Additional information is contained in the original extended abstract.
Nimmo, F.↗
Benefit of "Push-pull" Locomotion for Planetary Rover Mobility
As NASAs exploration missions on planetary terrains become more aggressive, a focus on alternative modes of locomotion for rovers is necessary. In addition to climbing steep slopes, the terrain in these extreme environments is often unknown and can be extremely hard to traverse, increasing the likelihood of a vehicle or robot becoming damaged or immobilized. The conventional driving mode in which all wheels are either driven or free-rolling is very efficient on flat hard ground, but does not always provide enough traction to propel the vehicle through soft or steep terrain. This paper presents an alternative mode of travel and investigates the fundamental differences between these locomotion modes. The methods of push-pull locomotion discussed can be used with articulated wheeled vehicles and are identified as walking or inchinginch-worming. In both cases, the braked non-rolling wheels provide increased thrust. An in-depth study of how soil reacts under a rolling wheel vs. a braked wheel was performed by visually observing the motion of particles beneath the surface. This novel technique consists of driving or dragging a wheel in a soil bin against a transparent wall while high resolution, high-rate photographs are taken. Optical flow software was then used to determine shearing patterns in the soil. Different failure modes were observed for the rolling and braked wheel cases. A quantitative comparison of inching vs. conventional driving was also performed on a full-scale vehicle through a series of drawbar pull tests in the Lunar terrain strength simulant, GRC-1. The effect of tire stiffness was also compared; typically compliant tires provide better traction when driving in soft soil, however its been observed that rigid wheels may provide better thrust when non-rolling. Initial tests indicate up to a possible 40 increase in pull force capability at high slip when inching vs. rolling.
robotics↗
Apollo 11 70-mm photographic catalog
Proof prints of virtually all the 70-mm photography exposed during the Apollo 11 mission are presented. The photography has been sorted by magazine and by frame number. The numbering scheme used throughout all Apollo mission is described. The catalog is designed to be used in conjunction with the section on 70-mm photography in Apollo 11 Photography: 70-mm, 16-mm, and 35-mm Frame Index, which provides pertinent information on each frame, and with Apollo Mission 11 Lunar Photography Indexes, which makes it possible to locate the area covered by each frame.
Source record↗
Results of induced atmosphere measurements from the Apollo program
Experiments on Apollo missions 15, 16, and 17 were utilized in an attempt to learn about the induced environment in the vicinity of manned spacecraft. Photographic sequences were examined to obtain scattered light data from the spacecraft-generated particulates during quiescence periods and after liquid dumps. The results allowed estimates of the obscuration factor and the clearing times after dumps. It was found that the clearing times were substantially longer than anticipated. The mass spectrometer detected a high molecular flux in lunar orbit which was induced by the spacecraft. It is shown that this is most likely caused by small ice crystals being continually produced in lunar orbit. Other data from the ultraviolet spectrometer and the stellar camera are also analyzed, and estimated values or upper limits are placed on the total scattering background, the size and number of particles generated, the velocity range, and the column density.
Naumann, R. J.↗
Beginning and end of lunar mare volcanism
The distribution and characteristics of the early phases of mare vulcanism on the moon are discussed. Breccias have been observed that indicate the presence of magma flows before 3900 Myr BP. A mafic feature has been identified in more than 100 craters at least 1 km across. The absence of buried mare surfaces on the nearside and western hemispheres is attributed to ejecta deposits, and farside basins with no mare fill are suggested to have experienced early mare flooding. Photographs of the bright-rayed Lichtenberg crater have revealed that mare volcanism occurred within the time frame 1700-2000 Myr BP. It is concluded that the moon featured two periods of igneous activity, the last happening at 1000 Myr BP, and beginning 4300 BP.
Schultz, P. H.↗
Special report - UV: Eye on the moon.
The Lunar Surface Ultraviolet Spectrographic Camera, the primary objective of which was to determine the location and extent of gaseous material (principally hydrogen) in preselected regions of the celestial sphere is described. Camera capability included acquisition of direct imagery and spectroscopy of the same target. The optical section made use of a Schmidt reflector component. The procedure for making photographic records is outlined.
Lankes, L. R.↗
40 Years of Processing Pieces of Space
This year marks the 40th year anniversary for the Antarctic Search for Meteorite (ANSMET) program. In 1976, the ANSMET program led the first expedition to Antarctica. The ANSMET program is a US-led field-based science project that recovers meteorite samples from Antarctica. Once a year from late November to late January, a field team consisting of 8 to 12 people, spends 6-8 weeks camping on the ice and collecting meteorites. Since 1976, more than 22,000 meteorite samples have been recovered. These meteorites come from asteroids, planets and other bodies of the solar system. Once collected, the Antarctic meteorites are shipped to NASA/Johnson Space Center (JSC) Houston, TX. in a refrigerated truck and are kept frozen to minimize oxidation until they are ready for initial processing. In Antarctica each meteorite is given a field tag which consists of numbers, once in the lab, this is replaced by an official tag, consisting of the Antarctic field location and year collected. The types and numbers of meteorites that have been classified include 849 carbonaceous chondrites, 135 enstatites, 512 achondrites, 64 stony, 115 irons, 48 others (27 R chondrites, 7 ungrouped), 6,161 H chondrites, 7,668 L chondrites, and 4,589 LL chondrites. Although 80-85 percent of the collected meteorites fall in the ordinary chondrite group, the other approximately 15 percent represent rare types of achondrites and carbonaceous chondrites. These rare meteorites include 25 lunar meteorites, 15 Martian meteorites, scores of various types of carbonaceous chondrites, and unique achondrites. The Antarctic meteorites that have been collected are processed in the Meteorite Processing Lab at JSC in Houston, TX. Initial processing of the meteorites begins with thawing/drying the meteorites in a nitrogen glove box for 24 to 48 hours. The meteorites are then photographed, measured, weighed and a description of the interior and exterior of each meteorite is written. The meteorite is broken and a representative sample, either a 1-3 gram chip or thin section is sent to the Smithsonian Institution for classification. After Antarctic meteorites have been classified and approved by the Nomenclature Committee of the Meteoritical Society, they are announced in the Antarctic Meteorite Newsletter, which is published twice per year (fall and spring) so that scientists may review which meteorites are available to study. Requests for Antarctic Meteorite samples are welcomed from research scientists, regardless of their current state of funding for meteorite studies. Since its inception over 3,300 requests have been made for pieces of these meteorites and over 400 investigators worldwide are active in the study of meteorites.. Research on these samples has been published in more than1500 peer reviewed articles; a listing of papers for any meteorite sample can be generated by accessing http://curator.jsc.nasa.gov/antmet/referencesearch.cfm. Antarctic meteorite samples requested by scientists are prepared several different ways. Most samples are prepared as chips, either using a rock splitter or using a chisel and chipping bowl. In special situations, a researcher may request a meteorite slab in which case the samples are cut using a diamond-bladed bandsaw inside of a dry nitrogen glove box. The meteorites are always cut in a 100 percent liquid-free environment. Additionally, thin/thick sections of Antarctic meteorites are also prepared at JSC. The meteorite thin section lab at JSC can prepare standard 30-micron thin sections, thick sections of variable thickness (100 to 200 microns), or demountable sections using superglue, all section are prepared without using water. Although many of the techniques used back in the '70's are still used today, advances in computers, software, databases, available tools and instrumentation have helped to streamline and shorten the duration of the classification process. In conjunction with present day missions to asteroids and other planets, meteorite studies have not only led to a better understanding of the complex histories of these bodies but have also tied certain meteorite groups to particular asteroid bodies. New meteorite discoveries by the ANSMET program provide a cost effective method for obtaining samples of previously unsampled bodies, allowing scientists to learn more about the origin, composition, and evolution of the solar system. Preservation in our cleanrooms at NASA allows material to be archived for future generations and advances in instrumentation and analysis.
Satterwhite, C. E.↗
An investigation into some problems in analytical processing of lunar orbiter photography
Problems in analytical processing of lunar orbiter photography are discussed. The effects of image motion and image motion compensation on the location of the principal point are analyzed. The effect of the focal plane shutter on the distortion and interior geometry is examined. Real data is used to confirm the workability of a mathematical model and the use of a computer to calibrate spaceborne photographic imagery.
Ghosh, S. K.↗