Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lattice Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Structure of Palladium Nanoclusters for Hydrogen Gas Sensors

Palladium nanoclusters produced by inert gas aggregation/magnetron sputtering are used as building blocks for the construction of nano electronic devices with large surface to volume ratios that can be used as sensitive hydrogen gas sensors in fuel cells and in petrochemical plants. X-ray diffraction (XRD), extended X-ray absorption fine structure (EXAFS), and high resolution transmission electron microscopy (HRTEM) have been used to characterize the structure, lattice constant, particle diameter and oxide thickness of the palladium nanoclusters in order to understand the operation of these sensors. Grazing incidence XRD (GIXRD) of heat treated Pd clusters has shown that the palladanite structure forms at elevated temperatures.

02 PETROLEUM↗

Synthesis of ZnSnO{sub 3} nanostructure by sol gel method

Zinc Stannate (ZST) with composition ZnSnO{sub 3} is known for high electron mobility, optical, piezoelectric and charge storage properties. ZST crystalizes in different lattice structures, which allows a wide range of tunablity. We demonstrate successful synthesis of ZnSnO{sub 3} nanomaterial by sol-gel method. ZnSnO{sub 3} nanomaterials were calcined and sintered at different temperatures. Powder X-ray diffraction confirmed the single phase of the nanomaterial with rhombohedral R-3 space group. The Rietveld refinement of diffraction pattern yielded lattice parameter values a=5.26Å, c=14.09Å. Raman spectroscopy revealed higher activity towards higher wavenumbers. Raman shift around 530cm{sup −1} was found to be highly structure dependent, most probably due to anharmonic atomic vibrations in ZnO{sub 6}/SnO{sub 6} octahedra around center of mass. Sharp Peak around 650cm{sup −1} is characteristic of ZnSnO{sub 3} molecule.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Adaptive control of large space structures using recursive lattice filters

The use of recursive lattice filters for identification and adaptive control of large space structures was studied. Lattice filters are used widely in the areas of speech and signal processing. Herein, they are used to identify the structural dynamics model of the flexible structures. This identified model is then used for adaptive control. Before the identified model and control laws are integrated, the identified model is passed through a series of validation procedures and only when the model passes these validation procedures control is engaged. This type of validation scheme prevents instability when the overall loop is closed. The results obtained from simulation were compared to those obtained from experiments. In this regard, the flexible beam and grid apparatus at the Aerospace Control Research Lab (ACRL) of NASA Langley Research Center were used as the principal candidates for carrying out the above tasks. Another important area of research, namely that of robust controller synthesis, was investigated using frequency domain multivariable controller synthesis methods.

Goglia, G. L.↗

NASA/ONERA Collaboration on Small Hovering Rotor Broadband Noise Prediction using Lattice-Boltzmann and Structured Navier-Stokes Solvers

This work compares two lattice-Boltzmann method solvers, PowerFLOW and ProLB, and two structured Navier-Stokes solvers, OVERFLOW2 and FAST, used by NASA and ONERA, respectively, for the broadband noise prediction of an ideally twisted rotor as part of Implementing Arrangement number FR-0685-0, ‘Comparing Computational Fluid Dynamics Solvers for Broadband Noise Prediction.’ Predicted results are evaluated against measured data from both smooth and rough blade sets acquired in the Small Hover Anechoic Chamber at the NASA Langley Research Center. Aerodynamic thrust predictions are seen to agree more favorably with the rough-blade measurements, whereas torque predictions agree better with the smooth-blade measurements. A tonal noise comparison shows better agreement to the measured data with the two structured Navier-Stokes solvers than with the two lattice-Boltzmann solvers, which is thought to be caused by the different geometric discretization associated with each solver paradigm. Broadband noise comparisons show that both lattice-Boltzmann method solvers trend well with the smooth-blade measurements, with the exception of an overprediction by ProLB between 4 kHz and 15 kHz. OVERFLOW2 is seen to capture the measured nondeterministic tonal content between 3 kHz and 8 kHz on a narrowband spectral basis and FAST agrees well with the rough blades on a one-third octave band basis.

Christopher S. Thurman↗

Theory-guided design of duplex-phase multi-principal-element alloys

Density-functional theory (DFT) is used to identify phase-equilibria in multi-principal-element and high-entropy alloys (MPEAs/HEAs), including duplex-phase and eutectic microstructures. Here, a combination of composition-dependent formation energy and electronic-structure-based ordering parameters were used to identify a transition from FCC to BCC favoring mixtures, and these predictions experimentally validated in the Al-Co-Cr-Cu-Fe-Ni system. A sharp crossover in lattice structure and dual-phase stability as a function of composition were predicted via DFT and validated experimentally. The impact of solidification kinetics and thermodynamic stability was explored experimentally using a range of techniques, from slow (castings) to rapid (laser remelting), which showed a decoupling of phase fraction from thermal history, i.e., phase fraction was found to be solidification rate-independent, enabling tuning of a multi-modal cell and grain size ranging from nanoscale through macroscale. Strength and ductility tradeoffs for select processing parameters were investigated via uniaxial tension and small-punch testing on specimens manufactured via powder-based additive manufacturing (directed-energy deposition). This work establishes a pathway for design and optimization of next-generation multiphase superalloys via tailoring of structural and chemical ordering in concentrated solid solutions.

36 MATERIALS SCIENCE↗

Influence of structural distortions upon photoluminescence properties of Eu{sup 3+} and Tb{sup 3+} activated Na{sub 3}Ln(BO{sub 3}){sub 2} (Ln=Y, Gd) borates

The comparative study of the structure and photoluminescence (PL) properties of the Eu{sup 3+} and Tb{sup 3+} activated Na{sub 3}Ln(BO{sub 3}){sub 2}, with Ln=Y, Gd, showed the important role of the host lattice structure upon PL. Higher emission intensities of Eu{sup 3+} and Tb{sup 3+} are observed for Na{sub 3}Gd(BO{sub 3}){sub 2} than for Na{sub 3}Y(BO{sub 3}){sub 2}, through direct Eu{sup 3+} excitation at 395 nm for Eu{sup 3+} doped borates, and through Gd{sup 3+} excitation around 280 nm for Tb{sup 3+} doped borates. This higher performance for Na{sub 3}Gd(BO{sub 3}){sub 2} is due to the less regular environment of Eu{sup 3+} (Tb{sup 3+}) in the Gd sites than in the Y sites and to energy transfer from Gd{sup 3+} to Eu{sup 3+}(Tb{sup 3+}). The smaller critical concentration in Na{sub 3}Ln{sub 1-x}Tb{sub x}(BO{sub 3}){sub 2} observed for Ln=Gd, x=0.5, compared to x=0.6 for Ln=Y, is explained by shorter Ln-Ln distances (4.11 A for Gd-Gd vs. 4.59 A for Y-Y). Both Na{sub 3}Y{sub 0.4}Tb{sub 0.6}(BO{sub 3}){sub 2} and Na{sub 3}Gd{sub 0.5}Tb{sub 0.5}(BO{sub 3}){sub 2} show intense green emission under UV excitation. - Graphical abstract: The PL properties of Eu{sup 3+} and Tb{sup 3+} are studied in Na{sub 3}Ln(BO{sub 3}){sub 2} (Ln=Y, Gd) borates. Eu{sup 3+} and Tb{sup 3+}exhibits higher emission intensity in Na{sub 3}Gd(BO{sub 3}){sub 2} compared to Na{sub 3}Y(BO{sub 3}){sub 2} due to the less regular environment of the Gd{sup 3+} ion. Energy transfer from Gd{sup 3+} to Tb{sup 3+} is observed. Highlights: Black-Right-Pointing-Pointer Crystal structure of Na{sub 3}Gd(BO{sub 3}){sub 2} by X-ray powder diffraction. Black-Right-Pointing-Pointer Photoluminescence properties of Eu{sup 3+} and Tb{sup 3+} doped Na{sub 3}Ln(BO{sub 3}){sub 2} (Ln=Y, Gd). Black-Right-Pointing-Pointer Higher Eu{sup 3+} and Tb{sup 3+} emission for Na{sub 3}Gd(BO{sub 3}){sub 2} due to an irregular environment of Gd{sup 3+}. Black-Right-Pointing-Pointer Higher Eu{sup 3+} and Tb{sup 3+} emission for Na{sub 3}Gd(BO{sub 3}){sub 2} due to energy transfer from Gd{sup 3+}. Black-Right-Pointing-Pointer Lower Tb{sup 3+} critical concentration for Na{sub 3}Gd(BO{sub 3}){sub 2} due to short Gd{sup 3+}-Gd{sup 3+} distances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interplay of electronic, magnetic, and structural properties of GdB 6 from first principles

Gadolinium hexaboride (GdB 6 ) is a well-known field emitter material that has been investigated for more than three decades. We perform a systematical density-functional theory study of GdB 6 by using the generalized-gradient approximation and considering the electron interaction parameter U. The basic structural and electronic properties are carefully revised, as well as a strong U-value dependence in determining the antiferromagnetic (AFM) magnetic structures of Gd 4f electronic states. We found a small U(0 ~ 3 eV) showing the most consistent experimental ground-state properties, which gives rise to a magnetic structure with a ground state of C-AFM and a second stable E-AFM. Moreover, we find the distortion modes of boron octahedron play an important role in the interaction between spin and lattice structures in this system. Furthermore, these results will deepen our understanding of the boron-based correlated rare earth compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Iron-Based Chalcogenide Spin Ladder BaFe2 X 3 (X = Se,S)

The relevance of magnetic, structural, orbital, and charge degrees of freedom in the iron-based superconductors (FeSCs) and related materials occupies a central focus in condensed matter physics. While the majority of iron-based materials exhibit the same two-dimensional iron square lattice structural motif, a family of AFe2X3 (X = Se,S) compounds introduces a quasi-one-dimensional (1D) ladder motif, which resembles the two-legged spin ladder copper oxide materials. Furthermore, unlike most parent compounds of FeSCs, the members of this spin ladder family are insulators. Recently, a superconducting transition has been observed under pressure with Tc up to 24 K, similar to the pressure-induced superconductivity in the copper oxide ladder Sr14-xCaxCu24O41 material, stimulating much interest. Here, we review the magnetic, structural, and electronic properties in this family, particularly in the BaFe2X3 series tuned by pressure and by chemical substitution. The established pressure-temperature (P-T) and carrier concentration-temperature (x-T) phase diagrams in related materials provide useful information to extend the variety of high-temperature superconductors and compare with other FeSCs. We also review some essential information about analogous square lattice FeSCs.

Wu, S↗

Ion-beam assisted sputtering of titanium nitride thin films

Abstract Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. This work aims to explore effects in ion beam-assisted sputtering (IBAS), were an observed increase in nominal critical temperature and upper critical fields are in tandem with previous work on Niobium nitride (NbN). We grow thin films of titanium nitride by both, the conventional method of DC reactive magnetron sputtering and the IBAS method, to compare their superconducting critical temperatures $$T_{c}$$ T c as functions of thickness, sheet resistance, and nitrogen flow rate. We perform electrical and structural characterizations by electric transport and x-ray diffraction measurements. Compared to the conventional method of reactive sputtering, the IBAS technique has demonstrated a 10% increase in nominal critical temperature without noticeable variation in the lattice structure. Additionally, we explore the behavior of superconducting $$T_c$$ T c in ultra-thin films. Trends in films grown at high nitrogen concentrations follow predictions of mean-field theory in disordered films and show suppression of superconducting $$T_c$$ T c due to geometric effects, while nitride films grown at low nitrogen concentrations strongly deviate from the theoretical models.

36 MATERIALS SCIENCE↗

Magnetic field dependence of low-energy magnons, anisotropic heat conduction, and spontaneous relaxation of magnetic domains in the cubic helimagnet ZnCr 2 Se 4

Here, anisotropic low-temperature properties of the cubic spinel helimagnet ZnCr 2 Se 4 in the single-domain spin-spiral state are investigated by a combination of neutron scattering, thermal conductivity, ultrasound velocity, and dilatometry measurements. In an applied magnetic field, neutron spectroscopy shows a complex and nonmonotonic evolution of the spin-wave spectrum across the quantum-critical point that separates the spin-spiral phase from the field-polarized ferromagnetic phase at high fields. A tiny spin gap of the pseudo-Goldstone magnon mode, observed at wave vectors that are structurally equivalent but orthogonal to the propagation vector of the spin helix, vanishes at this quantum critical point, restoring the cubic symmetry in the magnetic subsystem. The anisotropy imposed by the spin helix has only a minor influence on the lattice structure and sound velocity but has a much stronger effect on the heat conductivities measured parallel and perpendicular to the magnetic propagation vector. The thermal transport is anisotropic at T≲ 2K, highly sensitive to an external magnetic field, and likely results directly from magnonic heat conduction. We also report long-time thermal relaxation phenomena, revealed by capacitive dilatometry, which are due to magnetic domain motion related to the destruction of the single-domain magnetic state, initially stabilized in the sample by the application and removal of magnetic field. Our results can be generalized to a broad class of helimagnetic materials in which a discrete lattice symmetry is spontaneously broken by the magnetic order.

36 MATERIALS SCIENCE↗

Questions Revisited: A Close Examination of Calculus of Inference and Inquiry

In this paper I examine more closely the way in which probability theory, the calculus of inference, is derived from the Boolean lattice structure of logical assertions ordered by implication. I demonstrate how the duality between the logical conjunction and disjunction in Boolean algebra is lost when deriving the probability calculus. In addition, I look more closely at the other lattice identities to verify that they are satisfied by the probability calculus. Last, I look towards developing the calculus of inquiry demonstrating that there is a sum and product rule for the relevance measure as well as a Bayes theorem. Current difficulties in deriving the complete inquiry calculus will also be discussed.

Knuth, Kevin H.↗

Characterization of Shocked Beryllium

Beryllium metal has many excellent structural properties in addition to its unique radiation characteristics, including: high elastic modulus, low Poisson's ratio, low density, and high melting point. However, it suffers from several major mechanical drawbacks: 1) high anisotropy - due to its hexagonal lattice structure and its susceptibility to crystallographic texturing; 2) susceptibility to impurity-induced fracture - due to grain boundary segregation; and 3) low intrinsic ductility at ambient temperatures thereby limiting fabricability. While large ductility results from deformation under the conditions of compression, the material can exhibit a brittle behavior under tension. Furthermore, there is a brittle to ductile transition at approximately 200 C under tensile conditions. While numerous studies have investigated the low-strain-rate constitutive response of beryllium, the combined influence of high strain rate and temperature on the mechanical behavior and microstructure of beryllium has received limited attention over the last 40 years. Prior studies have focused on tensile loading behavior, or limited conditions of dynamic strain rate and/or temperature. The beryllium used in this study was Grade S200-F (Brush Wellman, Inc., Elmore, OH) material. The work focused on high strain rate deformation and examine the validity of constitutive models in deformation rate regimes, including shock, the experiments were modeled using a Lagrangian hydrocode. Two constitutive strength (plasticity) models, the Preston-Tonks-Wallace (PTW) and Mechanical Threshold Stress (MTS) models, were calibrated using the same set of quasi-static and Hopkinson bar data taken at temperatures from 77K to 873K and strain rates from 0.001/sec to 4300/sec. In spite of being calibrated on the same data, the two models give noticeably different results when compared with the measured wave profiles. These high strain rate tests were conducted using both explosive drive and a gas gun to accelerate the material. Preliminary analysis of the results appears to indicate that, if fractured by the initial shock loading, the S200F Be remains sufficiently intact to support a shear stress following partial release and subsequent shock re-loading of the material. Additional 'arrested' drive shots were designed and tested to minimize the reflected tensile pulse in the sample. These tests were done to both validate the model and to put large shock induced compressive loads into the beryllium sample.

36 MATERIALS SCIENCE↗

Structural, morphological, optical and magnetic properties of Ag3(2+x)InxNb4-xO11+δ (0.25 ≤ x ≤ 1.0) nanoparticles synthesized by sol–gel method

Highlights: • Novel Ag{sub 3 (2+x)} In{sub x}Nb{sub 4-x}O{sub 11+δ} nanoparticles were synthesized by sol-gel method and studied their optical magnetic properties. • XRD studies confirm the single-phase monoclinic lattice structure with P2/m space group. • Morphology, purity and homogeneity of samples were confirmed by SEM images, EDX and X-ray mapping. • The absorption spectra and tauc plots confirms the semiconductor nature of the samples. • Magnetic studies reveals the ferromagnetic behavior of the samples at room temperature. - Abstract: Herein, we report the structure, morphology, optical and magnetic properties of novel Ag{sub 3 (2+x)} In{sub x}Nb{sub 4-x}O{sub 11+δ} (0.25 ≤ × ≤ 1.0; A1–A4) nanoparticles prepared by sol-gel technique. The samples were studied using X-ray diffraction, electron microscopy, diffuse reflectance spectroscopy, vibrating sample magnetometer, and electron spin resonance. X-ray diffraction studies confirm the formation of monoclinic lattice type with P2/m space group. Purity and homogeneity of the samples were confirmed by X-ray mapping. The semiconductor nature of the samples was identified by optical absorption spectra which indicate an inter-band transition from the oxygen 2p to niobium 4d electronic states. The magnetization plots reveal the room temperature ferromagnetic behavior of the samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Accommodating a hexagonal ζ- phase Mn 2 N film on a cubic MgO (001) substrate

The thin films of c -plane dominated hexagonal ζ- phase Mn 2 N were successfully grown on a cubic MgO (001) substrate directly using plasma-assisted molecular beam epitaxy. The surface was comprehensively studied through experimental and theoretical approaches. Reflection high energy electron diffraction revealed two pseudo-cubic domains along [100] MgO and [110] MgO , and one hexagonal domain, which is 30° apart from the [100] MgO direction. Scanning tunneling microscopy was used to image and resolve the high-quality surface, revealing a distorted hexagonal surface structure. Furthermore, atomic resolution of the hexagonal domain with a 2 × 2 reconstructed surface is presented. For c-plane surface, theoretical investigations were carried out using first principles studies to determine the surface formation energy for various reconstructed surfaces. The theoretical study shows that the nitrogen terminated 2 × 2 structure with a manganese adatom on the surface as the most stable reconstruction that reproduces the experimental results. A corresponding simulated scanning tunneling microscopy model is also presented, providing strong support for the experimentally observed in-plane lattice structures. Furthermore, the manganese: nitrogen stoichiometry within the bulk and surface is in good agreement with the expected ratio of 2:1.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphene oxide precursor effects on 3D-printed carbon scaffolds

Manganese oxide (MnO 2 ), an earth-abundant material, is a promising component for energy storage devices, with uses in both pseudocapacitors and batteries. However, high MnO 2 loading often leads to reduced performance due to poor ion diffusion. 3D printing, particularly using the direct ink writing (DIW) technique, offers a solution by enabling the fabrication of electrodes with hierarchical porous structures and open channels that enhance mass transport and ion diffusion. Previous work demonstrated that 3D-printed graphene aerogels with MnO 2 coatings exhibited excellent electrochemical performance, even with thick electrodes, due to their optimized structure. Building on this work, the current study investigates the performance differences between aerogels developed using graphene oxide (GO) and reduced graphene oxide (rGO) as carbon precursors. Both materials were incorporated into thixotropic inks, 3D-printed into lattice structures, and carbonized. Despite expected similarities between the final graphene aerogel, rGO-based aerogels exhibited superior areal capacitance, compared to GO-based aerogels. These differences are attributed to the lower oxygen content and defect density of rGO, which influence its interaction with cellulose viscosifiers in the ink formulation. Brunauer–Emmett–Teller (BET) surface area analysis revealed that rGO aerogels exhibit a larger surface area and mesoporous structure, further enhancing their performance. When coated with MnO 2 , rGO-based aerogels maintained their superior capacitive behavior over GO-based aerogels. This study highlights the effect of carbon precursor on the end performance of graphene aerogels.

Materials science↗

Phase transitions and the temperature dependence of the dielectric properties in tetragonally strained barium strontium titanate films

The dielectric properties of sputter-deposited Ba{sub 1-x}Sr{sub x}TiO{sub 3} (BST) thin films on (001) MgO substrates with in-plane or out-of-plane tetragonal lattice structure distortions were characterized as a function of temperature. A temperature-dependent interpolation calibration technique was developed for increased efficiency of the microwave measurements. The BST films showed significant differences in the ferroelectric phase transition due to lattice distortions with a strong temperature dependence of the in-plane dielectric behavior for films under tensile strain and a weak temperature dependence for films under compressive strain. The experimental data agreed well with theoretical modeling of the BST film strain effect based on Devonshire's theory.

36 MATERIALS SCIENCE↗

Nanosized helical magnetic domains in strongly frustrated Fe 3 PO 4 O 3

Fe 3 PO 4 O 3 forms a noncentrosymmetric lattice structure (space group R3m) comprising triangular motifs of Fe 3+ coupled by strong antiferromagnetic interactions ( | Θ CW | > 900 K). Neutron diffraction from polycrystalline samples shows that strong frustration eventually gives way to an ordered helical incommensurate structure below T N =163 K, with the helical axis in the hexagonal ab plane and a modulation length to ~86 Å. The magnetic structure consists of an unusual needlelike correlation volume that extends past 900 Å along the hexagonal c axis but is limited to ~70 Å in the a b plane, despite the three-dimensional nature of the magnetic sublattice topology. The small in-plane correlation length, which persists to at least T = T N /40 , indicates a robust blocking of long-range order of the helical magnetic structure, and therefore stable domain walls, or other defect spin textures, must be abundant in Fe 3 PO 4 O 3 . Temperature-dependent neutron powder diffraction reveals small negative thermal expansion below T N . No change in lattice symmetry is observed on cooling through T N , as revealed by high-resolution synchrotron x-ray diffraction. The previously reported reduced moment of the Fe 3+ ions (S = 5/2), μ ~ 4.2 μ B , is confirmed here through magnetization studies of a magnetically diluted solid solution series of compounds, Fe (3–x) Ga x PO 4 O 3 , and is consistent with the refined magnetic moment from neutron diffraction 4.14(2) μ B . Here, we attribute the reduced moment to a modified spin density distribution arising from ligand charge transfer in this insulating oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗