Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material Attributes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Further investigations of experiment A0034 atomic oxygen stimulated outgassing

Thermal control coatings within the recessed compartments of LDEF Experiment A0034 experienced the maximum leading edge fluence of atomic oxygen with considerably less solar UV radiation exposure than top-surface mounted materials of other LDEF experiments on either the leading or the trailing edge. This combination of exposure within A0034 resulted in generally lower levels of darkening attributable to solar UV radiation than for similar materials on other LDEF experiments exposed to greater cumulative solar UV radiation levels. Changes in solar absorptance and infrared thermal emittance of the exposed coatings are thus unique to this exposure. Analytical results for other applications have been found for environmentally induced changes in fluorescence, surface morphology, light scattering, and the effects of coating outgassing products on adjacent mirrors and windows of the A0034 experiment. Some atmospheric bleaching of the thermal control coatings, in addition to that presumably experience during reentry and recovery operations, has been found since initial post-flight observations and measurements.

Linton, Roger C.↗

Synthesis, Structure, and Spectroscopy of Epitaxial EuFeO 3 Thin Films

Rare earth iron perovskites RFeO3, where R is a rare earth cation, exhibit an array of magnetic, catalytic, optical, and electrochemical properties. Here we study EuFeO3 films synthesized by molecular beam epitaxy to improve our understanding of the optical properties of ferrites. A combination of X-ray diffraction, X-ray reflectivity, Rutherford backscattering spectroscopy, and scanning transmission electron microscopy was used to characterize the film structure and cation composition. X-ray absorption spectroscopy confirms the nominal 3+ valence states of Eu and Fe. The optical properties of EuFeO3 were investigated using variable-angle spectroscopic ellipsometry between the photon energies of 1.25 and 5 eV. We find that EuFeO3 is a semiconductor with an onset of optical absorption near 2.5 eV. The absorption spectrum of EuFeO3 is blue-shifted with respect to LaFeO3 films, a result that is attributed to the structural differences between the two materials.

Choquette, Amber K.↗

Accelerated thermal aging of harvested hypalon jacket for remaining useful life determination and diagnosis - 210

For nuclear power plants (NPPs) considering second license renewal for their operation beyond 60 years, knowledge of long-term operation, condition monitoring, and viability for the reactor components including reactor pressure vessel, concrete structures, and cable systems is essential. Such knowledge will provide NPPs with a game plan to predict performance and to estimate costs that are associated with monitoring or replacement programs for the affected systems. For cable systems that encompass a wide variety of materials, manufacturers, and in-plant location, accelerated aging of harvested cable jacket and insulation can provide insight as to remaining useful life and methods for monitoring. Accelerated thermal aging in air at temperatures between 80 deg. C and 120 deg. C was carried out on a multi-conductor control rod cable that had been inservice for over 30 years and was made by Boston Insulated Wire with Hypalon{sup TM} cable jacket and ethylene-propylene rubber insulation. From elongation at break (EAB) measurements and supporting Arrhenius analysis of the jacket material, an activation energy of 97.84 kJ/mol was estimated and the time to degradation, as represented by 50% EAB at the expected maximum operating temperature of 45 deg. C, was estimated to be 80 years. These values were slightly below previous measurements on similar BIW Hypalon cable jacket and could either be attributed to inservice degradation or variations in material properties from process variations. In addition, results from indenter modulus measurements and Fourier transform infrared spectroscopy suggest possible markers that could be beneficial to monitor cable conditions. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A critical comparison of ten disposable cup LCAs

Disposable cups can be made from conventional petro-plastics, bioplastics, or paperboard (coated with petro-plastics or bioplastics). This study compared ten life cycle assessment (LCA) studies of disposable cups with the aim to evaluate the robustness of their results. The selected studies have only one impact category in common, namely climate change with global warming potential (GWP) as its category indicator. Quantitative GWP results of the studies were closer examined. GWPs within and across each study show none of the cup materials to be consistently better than the others. Comparison of the absolute GWPs (after correction for the cup volume) also shows no consistent better or worse cup material. An evaluation of the methodological choices and the data sets used in the studies revealed their influence on the GWP. The differences in GWP can be attributed to a multitude of factors, i.e., cup material and weight, production processes, waste processes, allocation options, and data used. These factors basically represent different types of uncertainty. Sensitivity and scenario analyses provided only the influence of one factor at once. A systematic and simultaneous use of sensitivity and scenario analyses could, in a next research, result in more robust outcomes. -- Highlights: • Conflicting results from life cycle assessment (LCA) on disposable cups • GWP results of LCAs did not point to a best or worst cup material. • Differences in GWP results are due to methodological choices and data sets used. • Standardized LCA: transparency of LCA studies, but still different in approaches.

54 ENVIRONMENTAL SCIENCES↗

Weathering and erosion of fractured bedrock systems: Weathering and erosion of fractured bedrock systems

We explore the contribution of fractures (joints) in controlling the rate of weathering advance for a low-porosity rock by using methods of homogenization to create averaged weathering equations. The rate of advance of the weathering front can be expressed as the same rate observed in non-fractured media (or in an individual block) divided by the volume fraction of non-fractured blocks in the fractured parent material. In the model, the parent has fractures that are filled with a more porous material that contains only inert or completely weathered material. The low-porosity rock weathers by reaction-transport processes. As observed in field systems, the model shows that the weathering advance rate is greater for the fractured as compared to the analogous non-fractured system because the volume fraction of blocks is <1. The increase in advance rate is attributed both to the increase in weathered material that accompanies higher fracture density, and to the increase in exposure of surface of low-porosity rock to reaction-transport. For constant fracture aperture, the weathering advance rate increases when the fracture spacing decreases. Equations describing weathering advance rate are summarized in the “List of selected equations”. If erosion is imposed at a constant rate, the weathering systems with fracture-bounded bedrock blocks attain a steady state. In the erosional transport-limited regime, bedrock blocks no longer emerge at the air-regolith boundary because they weather away. In the weathering-limited (or kinetic) regime, blocks of various size become exhumed at the surface and the average size of these exposed blocks increases with the erosion rate. For convex hillslopes, the block size exposed at the surface increases downslope. This model can explain observations of exhumed rocks weathering in the Luquillo mountains of Puerto Rico.

54 ENVIRONMENTAL SCIENCES↗

Magnetic ordering through itinerant ferromagnetism in a metal-organic framework

In this report, the materials that combine magnetic order with other desirable physical attributes could find transformative applications in spintronics, quantum sensing, low-density magnets and gas separations. Among potential multifunctional magnetic materials, metal-organic frameworks, in particular, bear structures that offer intrinsic porosity, vast chemical and structural programmability, and the tunability of electronic properties. Nevertheless, magnetic order within metal-organic frameworks has generally been limited to low temperatures, owing largely to challenges in creating a strong magnetic exchange. Here we employ the phenomenon of itinerant ferromagnetism to realize magnetic ordering at T C = 225 K in a mixed-valence chromium(II/III) triazolate compound, which represents the highest ferromagnetic ordering temperature yet observed in a metal-organic framework. The itinerant ferromagnetism proceeds through a double-exchange mechanism, which results in a barrierless charge transport below the Curie temperature and a large negative magnetoresistance of 23% at 5 K. These observations suggest applications for double-exchange-based coordination solids in the emergent fields of magnetoelectrics and spintronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hollow Silicon Nanospheres Encapsulated with a Thin Carbon Shell: An Electrochemical Study

In this study we have investigated the electrochemical properties of hollow silicon nanospheres encapsulated with a thin carbon shell, HSi@C, as a potential candidate for lithium-ion battery anodes. Hollow Si nanospheres are formed using a templating method which is followed by carbon coating via carbonization of a pyrrole precursor to form HSi@C. The synthesis conditions and the resulting structure of HSi@C have been studied in detail to obtain the target design of hollow Si nanospheres encapsulated with a carbon shell. The HSi@C obtained exhibits much better electrochemical cycle stability than both micro-and nano-size silicon anodes and deliver a stable specific capacity of 700 mA h g(-1) after 100 cycles at a current density of 2 A g(-1) and 800 mA h g(-1) after 120 cycles at a current density of 1 A g(-1). The superior performance of HSi@C is attributed to the synergistic combination of the nanostructured material, the enhanced conductivity, and the presence of the central void space for Si expansion with little or no change in the volume of the entire HSi@C particle. This study is the first detailed investigation of the synthesis conditions to attain the desired structure of a hollow Si core with a conductive carbon shell. This study also offers guidelines to further enhance the specific capacity of HSi@C anodes in the future. (C) 2016 Elsevier Ltd. All rights reserved.

Anode↗

Evaluation of Sulfur 'Concrete' for Use as a Construction Material on the Lunar Surface

Combining molten sulfur with any number of aggregate materials forms, when solid, a mixture having attributes similar, if not better, to conventional water-based concrete. As a result the use of sulfur "concrete" on Earth is well established, particularly in corrosive environments. Consequently, discovery of troilite (FeS) on the lunar surface prompted numerous scenarios about its reduction to elemental sulfur for use, in combination with lunar regolith, as a potential construction material; not requiring water, a precious resource, for its manufacture is an obvious advantage. However, little is known about the viability of sulfur concrete in an environment typified by extreme temperatures and essentially no atmosphere. The experimental work presented here evaluates the response of pure sulfur and sulfur concrete subjected to laboratory conditions that approach those expected on the lunar surface, the results suggesting a narrow window of application.

Grugel, R. N.↗

Conjugated Macrocycles in Organic Electronics

This Account describes a body of research on the design, synthesis, and application of a new class of electronic materials made from conjugated macrocycles. Our macrocyclic design takes into consideration the useful attributes of fullerenes and what properties make fullerenes efficient n-type materials. We identified four electronic and structural elements: (1) a three-dimensional shape; (2) a conjugated and delocalized π-space; (3) the presence of an interior and exterior to the π-surface; and (4) low-energy unoccupied molecular orbitals allowing them to accept electrons. The macrocyclic design incorporates some of these properties, including a three-dimensional shape, an interior/exterior to the π-surface, and low-lying LUMOs maintaining the n-type semiconducting behavior, yet we also install synthetic flexibility in our approach in order to tune the properties further. Each of the macrocycles comprises perylenediimide cores wound together with linkers. The perylenediimide building block endows each macrocycle with the ability to accept electrons, while the synthetic flexibility to install different linkers allows us to create macrocycles with different electronic properties and sizes. We have created three macrocycles that all absorb well into the visible range of the solar spectrum and possess different shapes and sizes. We then use these materials in an array of applications that take advantage of their ability to function as n-type semiconductors, absorb in the visible range of the solar spectrum, and possess intramolecular cavities. This Account will discuss our progress in incorporating these new macrocycles in organic solar cells, organic photodetectors, organic field effect transistors, and sensors. The macrocycles outperform acyclic controls in organic solar cells. We find the more rigid macrocyclic structure results in less intrinsic charges and lower dark current in organic photodetectors. Our macrocyclic-based photodetector has the highest detectivity of non-fullerene acceptors. The macrocycles also function as sensors and are able to recognize nuanced differences in analytes. Perylenediimide-based fused oligomers are efficient materials in both organic solar cells and field effect transistors. Here, we will use the oligomers to construct macrocycles for use in solar energy conversion. In addition, we will incorporate different electron-rich linkers in our cycles in an attempt to engineer the HOMO/LUMO gap further. Looking further into the future, we envision opportunities in applying these conjugated macrocycles as electronic host/guest materials, as concatenated electronic materials by threading the macrocycles with electroactive oligomers, and as a locus for catalysis that is driven by light and electric fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combustion synthesized rod-like nanostructure hematite with enhanced lithium storage properties

Graphical abstract: Fe{sub 2}O{sub 3} nanorods are synthesized by combustion method using alcohol as both solvent and fuel. As an anode material for lithium-ion batteries, the Fe{sub 2}O{sub 3} nanorod electrode delivers good electrochemical performance. - Highlights: • We prepared Fe{sub 2}O{sub 3} nanorod by a facile and powerful combustion method. • The Fe{sub 2}O{sub 3} nanorod shows high capacity, good cycle stability, and rate performance. • Combustion saves time and energy to meet the demand of green and sustainable industry. - Abstract: Fe{sub 2}O{sub 3} nanorods are synthesized by combustion method using alcohol as both solvent and fuel, which is a facile and effective strategy for the large-scale and inexpensive fabrication. The Fe{sub 2}O{sub 3} nanorods are with the well distributed diameters of 20–30 nm and length ranging from 80 to 100 nm. As an anode material for lithium-ion batteries, the Fe{sub 2}O{sub 3} nanorod electrode delivers a high discharge capacity of 761.7 mA h g{sup −1} after 60 cycles at 500 mA g{sup −1}, and 727.2 mA h g{sup −1} at a high current density of 2000 mA g{sup −1}. The good electrochemical performance is attributed to the sufficient contact of active material and electrolyte, large surface area, and short diffusion length of Li{sup +}.

36 MATERIALS SCIENCE↗

Valuation of Anode Materials for High-Performance Lithium Batteries: From Graphite to Lithium Metal and Beyond

Lithium-ion batteries have revolutionized energy storage, yet advanced technologies such as electric vehicles and eVTOLs demand even higher performance and safety. Anodes, the negative electrodes, are crucial in enhancing batteries’ safety, lifespan, and fast-charging capabilities. This review paper comprehensively evaluates the progression of anode materials from traditional graphite to advanced anodes like lithium metal. Graphite anodes, with a capacity of 372 mAh g −1 , enabled the first commercial lithium-ion batteries, but future applications require higher energy densities and fast-charging capabilities. Emerging anode materials, including alloying, and conversion types, as well as lithium metal, offer significantly higher capacities, with lithium metal offering a theoretical capacity of 3 860 mAh g −1 . However, these advanced anodes face challenges such as volume expansion, high surface reactivity, sluggish Li+ kinetics, and unstable lithium deposition morphologies. Here, this review critically examines the electrochemical performance, interfacial properties, mechanical attributes, and stability issues of various anode materials. It further discusses solid electrolyte interphase (SEI) formation, strategies for enhancing interface stability, and the requirements of anodes for solid-state batteries. Additionally, the review explores potential solutions for limitations with each anode type, highlights innovative anode-free architectures, and evaluates the current and future trends of battery anode industries. Ultimately, this paper aims to guide the development of high-performance anode materials, paving the way for the next generation of efficient, reliable lithium batteries.

Alloying anodes↗

Third Order Optical Nonlinearity of Colloidal Metal Nanoclusters Formed by MeV Ion Implantation

We report the results of characterization of nonlinear refractive index of the composite material produced by MeV Ag ion implantation of LiNbO(sub 3) crystal (z-cut). The material after implantation exhibited a linear optical absorption spectrum with the surface plasmon peak near 430 nm attributed to the colloidal silver nanoclusters. Heat treatment of the material at 500 deg C caused a shift of the absorption peak to 550 nm. The nonlinear refractive index of the sample after heat treatment was measured in the region of the absorption peak with the Z-scan technique using a tunable picosecond laser source (4.5 ps pulse width).The experimental data were compared against the reference sample made of MeV Cu implanted silica with the absorption peak in the same region. The nonlinear index of the Ag implanted LiNbO(sub 3) sample produced at five times less fluence is on average two times greater than that of the reference.

Sarkisov, S. S.↗

Ceramic cation exchange materials

Cation exchange membranes and materials including silica-based ceramics, and associated methods, are provided. In some aspects, cation exchange membranes that include a silica-based ceramic that forms a coating on and/or within a porous support membrane are described. The cation exchange membranes and materials may have certain structural or chemical attributes (e.g., pore size/distribution, chemical functionalization) that, alone or in combination, can result in advantageous performance characteristics in any of a variety of applications for which selective transport of positively charged ions through membranes/materials is desired. In some embodiments, the silica-based ceramic contains relatively small pores (e.g., substantially spherical nanopores) that may contribute to some such advantageous properties. In some embodiments, the cation exchange membrane or material includes sulfonate and/or sulfonic acid groups covalently bound to the silica-based ceramic.

Newbloom, Gregory Matthew↗

Machine Learning for Joint Quality Control

The use of lightweight material combinations has been highly demanded in manufacturing automotive structures. However, making robust dissimilar material joints of such lightweight materials is still challenging. A significant barrier to achieving high-quality and repeatable joint performance is a deficient understanding of the relationship between the welding process, joint attributes, and joint performance. In this context, welding factors refer to material, equipment, environment, and process parameters, while joint features comprise specific microstructural attributes of the weld such as nugget size, heat affected zone (HAZ) topology, intermetallic layer thickness, and sheet thickness reduction. Joint performance is quantified in terms of strength (e.g., tensile shear, coach peel, cross-tension), weld size, and hardness, among other factors. While there have been many attempts to establish this process-structure-property relationship by developing a model derived from the associated physics and first principles, the complexity of the joining processes compounded by the complex interactions with different materials in an automotive assembly line environment, has hindered the usefulness of such attempts. The complexity is further exacerbated using different stacking materials, especially comprising dissimilar material combinations. In practice, the common approach has been the laborious process of creating welds, characterizing them, and then physically testing them through experimentation. With the emergence of artificial intelligence (AI) methods, an alternative pathway to eliciting the desired process-structure-property relationship at an accelerated pace is to use a data-driven approach by employing machine-learning (ML) techniques. This approach is benefitted by the availability of large streams of data, generated through years of research and testing by original equipment manufacturers, in the form of material, process, environmental, equipment, microstructural, and bulk-scale performance information from multimodal, multiscale sensors making measurements from laboratory-scale to production-scale processes. During Phase I efforts, which ended in fiscal year (FY) 2021, the Oak Ridge National Laboratory and Pacific Northwest National Laboratory (ORNL/PNNL) team demonstrated the effectiveness of different ML/AI frameworks in modeling complex relationships between resistance spot welding (RSW) process parameters, weld attributes, and joint properties using a subset of data from General Motors (GM). In FY 2022, the project team further refined and expanded their respective ML models to analyze additional welds with new weld stack-ups and materials to enhance the ML model predictive capability. ORNL extended its unified deep neural networks (DNN) ML training and prediction framework with new data streams of process parameters, and PNNL extended its model describing RSW process parameters’ associations with weld attributes. In FY 2023, the project team completed the development of the AI/ML architecture for analyzing aluminum/steel joints manufactured by GM via RSW and transitioned into the inline welding quality monitoring task for steel/steel RSW joints provided by GM.

36 MATERIALS SCIENCE↗

Demonstration of long minority carrier lifetimes in very narrow bandgap ternary InAs/GaInSb superlattices

Minority carrier lifetimes in very long wavelength infrared (VLWIR) InAs/GaInSb superlattices (SLs) are reported using time-resolved microwave reflectance measurements. A strain-balanced ternary SL absorber layer of 47.0 Å InAs/21.5 Å Ga0.75In0.25Sb, corresponding to a bandgap of ~50 meV, is found to have a minority carrier lifetime of 140 ± 20 ns at ~18 K. This lifetime is extraordinarily long, when compared to lifetime values previously reported for other VLWIR SL detector materials. As a result, this enhancement is attributed to the strain-engineered ternary design, which offers a variety of epitaxial advantages and ultimately leads to a reduction of defect-mediated recombination centers.

36 MATERIALS SCIENCE↗

Achieving carbon-rich silicon-containing ceramic anode for advanced lithium ion battery

Silicon carbon (Si/C) materials are promising anode candidates for high performance lithium ion batteries (LIBs). However, serious volume expansion and solid electrolyte interface formation limited their actual capacity during lithiation and delithiation. In the present study, an innovative and low-cost synthetic approach was developed for synthesizing carbon-rich silicon-containing polymer-derived ceramics from poly(dimethylsilyene)diacetylenes (PDSDA) and its feasibility to be used as anodes was demonstrated. The attained PDCs@800 °C exhibited a high specific capacity upto 883 mAhg -1 at 400 mAg -1 , with >99% coulombic efficiency (CE), and 90% capacity retention even after 500 cycles, setting a new record for PDCanode materials in LIBs. The high specific capacity was attributed to the incessant Si/C network which delivered consistent conductance and a stable solid electrolyte interphase (SEI). Here, this study opens the door to explore and apply well-designed ceramic materials derived from tailored polymers as high performance anodes for lithium ion batteries.

25 ENERGY STORAGE↗

Influence of processing factors on the physical metallurgy of LENS deposited 316L stainless steel.

Directed energy deposition (DED) is a type of additive manufacturing (AM) process; Laser Engineered Net Shaping (LENS) is a commercial DED process. We are developing LENS technology for printing 316L stainless steel components for structural applications. It is widely known that material properties of AM components are process dependent, attributed to different molten metal incorporation and thermal transport mechanisms. This investigation focuses on process-structure-property relationships for LENS deposits for enabling the process development and optimization to control material property. We observed interactions among powder melting, directional molten metal flow, and the molten metal solidification. The resultant LENS induced microstructure found to be dictated by the process-related characteristics, i.e., interpass boundaries from multi-layer deposition, molten metal flow lines, and solidification dendrite cells. Each characteristic bears the signature of the unique localized thermal history during deposition. Correlation observed between localized thermal transport, resultant microstructure, and its subsequent impact on the mechanical behavior of the current 316L is discussed. We also discuss how the structures of interpass boundaries are susceptible to localized recrystallization, grain growth and/or defect formation, and therefore, heterogeneous mechanical properties due to the adverse presence of unmelted powder inclusions.

36 MATERIALS SCIENCE↗

Phase transitions, dielectric properties, and vibrational study of stannates perovskites Sr{sub 1−x}Er{sub x}SnO{sub 3−δ}

Graphical abstract: The diffuseness of the phase transition of the Sr{sub 1−x}Er{sub x}SnO{sub 3−δ} enhances with the increasing of erbium content. These compounds were found to undergo phase transitions with increasing temperature. - Highlights: • Substitution Sr/Er in the alkaline earth cage modifies the thermally induced disorder. • Two phase transitions have been observed by DSC. • The dielectric constant increases with erbium substitution. • Dielectric loss increases exponentially with temperature. • The conductivity contribution is mainly due to hopping process. - Abstract: A polycrystalline stannates perovskites Sr{sub 1−x}Er{sub x}SnO{sub 3−δ} (x = 0.00, 0.01 and 0.03) were synthesized by sol–gel method and their vibrational properties were investigated using Raman scattering. The substitution of Er in the Sr site, results in a slight change of the position of the Raman spectrum bands. The differential scanning calorimetry (DSC) shows two phase transitions at 532 K and 634 K for Sr{sub 0.99}Er{sub 0.01}SnO{sub 3−δ}. The dielectric behavior of each solid solution (x = 0.01 and x = 0.03) has been studied as a function of temperature and frequency and has confirmed the observed phase transitions. The diffuseness of the phase transitions of these materials enhances with the increasing of erbium content. The dielectric constant showed a strong increase near the phase transitions temperature which value depends with frequency. This phenomenon is usually observed in relaxor materials. The conduction and the dielectric relaxation are attributed to hopping of electrons among Sn{sup 2+} and Sn{sup 4+} ions.

36 MATERIALS SCIENCE↗