Measurement of the earth's atmosphere Final report
Ambient pressure, temperature, and density measurements for earth atmosphere by rocket probe instrumentation
METEOROLOGICAL PROBE↗
SEARCH · Search NASA
Results for “Meteorological Instrument”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Advanced techniques for future observations from space
Advanced remote sensing techniques for the study of global meteorology and the chemistry of the atmosphere are considered. Remote sensing from Spacelab/Shuttle and free-flying satellites will provide the platforms for instrumentation based on advanced technology. Several laser systems are being developed for the measurement of tropospheric winds and pressure, and trace species in the troposphere and stratosphere. In addition, a high-resolution passive infrared sensor shows promise for measuring temperature from sea level up through the stratosphere. Advanced optical and microwave instruments are being developed for wind measurements in the stratosphere and mesosphere. Microwave techniques are also useful for the study of meteorological parameters at the air-sea interface.
Hinkley, E. D.↗
Experimental measurements of the ground cloud effluents and cloud growth for the May 20, 1975, Titan 3C launch at Air Force Eastern Test Range, Florida
The experiment included surface level and airborne in situ cloud measurements of the exhaust effluents from the Titan IIIC solid rocket boosters. Simultaneous visible spectrum photographic pictures of the ground cloud as well as infrared imaging of the cloud were obtained to study the cloud rise, growth, and direction of travel within the earth's surface mixing layer. The NASA multilayer diffusion model predictions of cloud growth, direction of travel, and expected surface level effluent concentrations were made prior to launch and after launch using measured meteorological conditions. Prelaunch predictions were used to position the effluent monitoring instruments, and the postlaunch predictions were compared with the measured data. Measurement results showed that surface level effluent values were low, often below the detection limits of the instrumentation. The maximum surface level hydrogen chloride concentration measured 50 parts per billion at about 8 km from the launch pad. The maximum observed in-cloud (airborne measurement) hydrogen chloride concentration was 7 per million.
Gregory, G. L.↗
Summary Report of the Icing Committee
Icing parameters have created problems and the problem areas that still exist today are presented. The problem areas include; (1) instrumentation; (2) test facilities; (3) weather forecasting of icing conditions; (4) meteorological design criteria; and (5) meteorological data.
Adams, R. I.↗
User needs and the future of operational meteorological satellites
Meteorological satellites and their capabilities are described. Future satellite configurations and instrumentation are discussed in the light of future user needs. In addition to the continuation of existing baseline products and services, the goals for improvement of the geosynchronous system through the 1990's will be: increasing spacial resolution in the visible and infrared channels; increasing vertical mean layer temperature resolution; adding the ability to image the solar disk; and upgrading the ground systems. Other improvements are discussed.
Miller, D. B.↗
Suggested severe local storm operational scenario for GOES I-M
The GOES I-M satellite system is expected to provide continuous high resolution estimates of temperature and moisture profiles, winds from cloud motions, surface temperature, cloud properties, and precipitation for severe local storm and tropical cyclone events. The suggested operational schedule for the GOES I-M satellite emphasizes the observation frequencies, spatial coverage, spectral bands, etc. for the GOES I-M imager and sounder instruments that are expected to optimize the determination of the relevant meteorological parameters. During severe local storm events, the imager would be programmed to perform high frequency imaging (less than or= 3.5 min) for determining winds from cloud motions and for monitoring severe convection. In addition, the sounder would provide temperature and moisture profiles every hour over a 3000 X 3000 km domain during the antecedent stage or over a 1000 X 1000 km area every 10 minutes during the mature storm stage.
Shenk, William E.↗
Use of satellite data and modeling to asses the influence of stratospheric processes on the troposphere
The research is comprised of the following tasks: use of simple analytical and numerical models of a coupled troposphere-stratosphere system to examine the effects of radiation and ozone on planetary wave dynamics and the tropospheric circulation; use of satellite data obtained from the Nimbus 7 Limb Infrared Monitor of the Stratosphere (LIMS) instrument and Solar Backscattered Ultraviolet (SBUV) experiment, in conjunction with National Meteorological Center (NMC) data, to determine the planetary wave vertical structures, dominant wave spectra, ozone spectra, and time variations in diabatic heating rate; and synthesis of the modeling and observational results to provide a better understanding of the effects that stratospheric processes have on tropospheric dynamics.
Nathan, Terrence R.↗
Particle Sizer
Microspheres are tiny plastic beads that represent the first commercial products manufactured in orbit. An example of how they are used is a new aerodynamic particle sizer designated APS 33B produced by TSI Incorporated. TSI purchased the microspheres from the National Bureau of Standards which certified their exact size and the company uses them in calibration of the APS 33B* instrument, latest in a line of TSI systems for generating counting and weighing minute particles of submicron size. Instruments are used for evaluating air pollution control devices, quantifying environments, meteorological research, testing filters, inhalation, toxicology and other areas where generation or analysis of small airborne particles is required. * The APS 33B is no longer being manufactured. An improved version, APS 3320, is now being manufactured. 2/28/97
Source record↗
Ocean Surface Vector Wind: Research Challenges and Operational Opportunities
The atmosphere and ocean are joined together over seventy percent of Earth, with ocean surface vector wind (OSVW) stress one of the linkages. Satellite OSVW measurements provide estimates of wind divergence at the bottom of the atmosphere and wind stress curl at the top of the ocean; both variables are critical for weather and climate applications. As is common with satellite measurements, a multitude of OSVW data products exist for each currently operating satellite instrument. In 2012 the Joint Technical Commission on Oceanography and Marine Meteorology (JCOMM) launched an initiative to coordinate production of OSVW data products to maximize the impact and benefit of existing and future OSVW measurements in atmospheric and oceanic applications. This paper describes meteorological and oceanographic requirements for OSVW data products; provides an inventory of unique data products to illustrate that the challenge is not the production of individual data products, but the generation of harmonized datasets for analysis and synthesis of the ensemble of data products; and outlines a vision for JCOMM, in partnership with other international groups, to assemble an international network to share ideas, data, tools, strategies, and deliverables to improve utilization of satellite OSVW data products for research and operational applications.
Joint Technical Commission on Oceanography and Mar↗
M2-SCREAM: A Stratospheric Composition Reanalysis of Aura MLS
Stratospheric composition and transport patterns are changing because of increasing greenhouse gas concentrations and declining levels of ozone depleting substances. Superimposed on forced trends are: dynamical variability at a range of time scales and unforeseen perturbations such as those resulting from injections of volcanic material and smoke from PyroCb events. Chemical reanalyses can be powerful tools for studying the composition of the stratosphere and disentangling forced responses from internal variability. This presentation introduces a new chemical reanalysis of stratospheric constituents developed and produced at NASA’s Global Modeling and Assimilation Office (GMAO) using the recently developed GMAO Constituent Data Assimilation System. Called the MERRA-2 Stratospheric Composition Reanalysis with Aura MLS (M2-SCREAM), this reanalysis consists of assimilated global three-dimensional fields of stratospheric ozone, water vapor, hydrogen chloride (HCl), nitric acid (HNO3) and nitrous oxide (N2O) mixing ratios and covers the period since the beginning of MLS observations in September 2004 to the present. M2-SCREAM assimilates version 4.2 MLS profiles of the five constituents alongside total ozone column from the Ozone Monitoring Instrument. The dynamics and tropospheric water vapor are constrained by assimilated meteorological fields from MERRA-2. The assimilated constituent fields and meteorology are provided to users at a 50-km horizontal resolution and a three-hourly frequency. Monthly analysis uncertainties and flags are also provided to the users. M2-SCREAM is an accurate and dynamically consistent high-resolution data record of the five constituents, all of which are of primary importance to stratospheric chemistry and transport studies. We will present a description of M2-SCREAM and selected results of a process-based evaluation of this product using independent data. As an illustration, we will discuss the perturbation to stratospheric composition from the eruption of Hunga Tonga–Hunga Ha'apai in January 2022 as seen in the reanalysis. We will also propose potential scientific applications of M2-SCREAM and outline plans for an upcoming comprehensive composition reanalysis that is being developed at NASA GMAO.
MERRA-2↗
Space platforms and meteorological applications
The use of Shuttle launched and tended space platforms (SP) for research and earth observations in LEO are examined. SPs will accommodate instruments for extended time periods, requiring a Shuttle visit for maintenance and package exchange once every six months. Designs have included off-the-shelf hardware to reduce cost, and comprise instruments for studies of cosmic rays, solar physics, materials processing, space plasma physics, and environmental observations. Solar cell power arrays are detailed, along with thermal control, data management, and attitude control subsystems. Meteorological applications are discussed in terms of the Lower Atmospheric Research Satellite (LARS), for research into coupling of radiative, chemical, and dynamical processes, interactions between the earth's surface, boundary layer, and troposphere, and dynamic and energetic relationships between lower atmospheric processes. Flight configurations and add-on concepts for the SP to lead to a manned space station are indicated.
Mitchell, K. L.↗
Towards a More Realistic Representation of NASA CERES-derived Surface Radiative Fluxes during Polar Night: A Comparison with the MOSAiC Field Campaign
The Arctic is one of the most sensitive regions of Earth to climate change, and yet remains one of the more difficult regions to both observe and simulate. The remoteness of the Arctic from most of civilization makes large volumes of in situ observations difficult to collect, and so satellite observations are a critical tool for observing the region, such as those from Clouds and the Earth’s Radiant Energy System (CERES). But validating the satellite radiative flux estimates is difficult because of the lack of in situ measurements. A useful remedy is utilizing measurements from field campaigns, such as the year-long Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition during 2019-2020. The extensive high-quality surface radiative flux and meteorological measurements collected from MOSAiC provide a useful check on flux retrievals from CERES instruments. We compare MOSAiC and CERES surface radiative fluxes during October through March of 2019-2020. As this time period is mostly during polar night and twilight, the focus of the study is on longwave surface fluxes. To better understand the reasons for errors in CERES fluxes, we use the large set of meteorological measurements also collected by MOSAiC, including surface temperature, thermodynamic vertical profiles, surface turbulent fluxes, and cloud properties. Previous work identified a significant source of error in the CERES estimate of surface downwelling longwave flux as the estimate of low level cloud amount when compared with MOSAiC W-band radar measurements. An overestimate of low cloud amount yielded an underestimate of the downwelling flux on the order of tens of W m2. Continuing this work, we test other meteorological properties such as the vertical thermodynamic profile and surface turbulent fluxes. In addition, we examine different estimates of surface fluxes derived from CERES measurements. Previous work used the SYN1deg product, which had the limitation of having a 1º x 1 º horizontal resolution. A newer product estimates the surface fluxes at the CERES footprint resolution, which allows a more precise colocation, and thus a representative flux estimate, with the MOSAiC site.
J Brant Dodson↗
Tiros IV Radiation Data Catalog and Users' Manual
The TIROS IV Meteorological Satellite contains a medium resolution scanning radiometer. Two of the channels of this instrument are sensitive to reflected solar radiation and the remaining two respond to emitted thermal radiation from the earth and its atmosphere. The two thermal channels are calibrated in terms of equivalent blackbody temperatures, and the reflected solar radiation channels in terms of effective radiant emittances. The calibration data, along with orbital and attitude data and the radiation data from the satellite, were incorporated in a computer program for an IBM 7090 which was used to produce, in binary form, the "Final Meteorological Radiation Tape" which is the basic repository of all radiation data. After launch, the radiometer displaye d the same degradation of response characteristics as did its predecessors in TIROS II and TIROS III. The onset of degradation results in a departure of the data from the prelaunch laboratory calibration. The cause of degradation has not been determined, and the matter is still being studied at the Goddard Space Flight Center. Before work with the TIROS IV radiation data is attempted, an understanding of the radiometer, its calibration, and the problems encountered in the experiment, especially from response degradation, is essential. The instrumentation design, development work, and the calibrations herein described were performed by the Goddard Space Flight Center Staff, whereas the computer and programming efforts were carried out jointly by the staffs of the National Weather Satellite Center, U. S. Weather Bureau, and the Goddard Space Flight Center. In this Catalog-Manual, the radiometer an d its calibration, data processing, the "Final Meteorological Radiation Tape", the observed degradation patterns, and possible corrections for degradation are discussed. The Catalog-Manual also includes, in two forms, documentation of each orbit of successfully reduced radiation data acquired by TIROS IV. One method of presentation is the Index of Final Meteorological Radiation Tapes and the other is a Subpoint Track, Summary of Available Radiation Data in diagrammatic form.
TIROS IV SATELLITE↗
Temperature lapse rate as an adjunct to wind shear detection
Several meteorological parameters were examined to determine if measurable atmospheric conditions can improve windshear detection devices. Lapse rate, the temperature change with altitude, shows promise as being an important parameter in the prediction of severe wind shears. It is easily measured from existing aircraft instrumentation, and it can be important indicator of convective activity including thunderstorms and microbursts. The meteorological theory behind lapse rate measurement is briefly reviewed, and and FAA certified system is described that is currently implemented in the Honeywell Wind Shear Detection and Guidance System.
Zweifil, Terry↗
Spectral Hygrometry Program, Mount Hopkins, Arizona - Instrumentation and Procedure Manual
Measuring total precipitable water vapor and correlations between water vapor and local meteorological parameters
Vaughn, C. R.↗
Navigation and Meteorological Data from Multiple Sensors on Airborne Platform (NAVMET-AIR) Value-Added Product Report
The Navigation and Meteorological Data from Multiple Sensors on Airborne Platform (NAVMET-AIR) value-added product encompasses the aafnaviwg data set in the ARM Data Center (ADC), known as the IWG file, named for the Inter-Agency Working Group for Airborne Data and Telemetry Systems (IWGADTS). Its purpose is to produce a suite of tools to promote standardization of instrument interface, data format, and data processing. This data set’s contents are navigational and meteorological state variables at 1 Hz. It also contains higher-order data flags created by ARM Aerial Facility (AAF) scientists to aid analysis such as periods when the aircraft is flying level, operating in maneuvers, or flying through cloud. Due to the nature of research flights, the payload of the aircraft consists of many duplicate and overlapping instruments to ensure, in case of instrument failure, there is a backup to record the data. Measurements from multiple instruments are consolidated into a single file. Each variable of this data set is carefully chosen from the onboard instrumentation and quality checked by AAF scientists to create this wholistic and most accurate data set for airborne research. This document is intended to be a hub towards the individual “read me” files produced for each campaign. For reference about what instrument was used for calculations on specific days, the read me files are located in the ARM IOP archive at the addresses listed, or access the IOP (intensive operational period) database at https://www.archive.arm.gov/.
54 ENVIRONMENTAL SCIENCES↗
Cleaned 5-Minute Resolution Air Quality and Meteorological Data from Nine TCEQ CAMS Sites in Houston, Texas (Nov 2021 – Oct 2022)
These data encompass 5-minute air monitoring and meteorological observations collected in the greater Houston, Texas metropolitan region, at nine (9) Continuous Ambient Monitoring Stations (CAMS) operated by the Texas Commission on Environmental Quality (TCEQ) between November 1, 2021 and October 31, 2022. The CAMS sites (CAMS 1, 8, 35, 45, 148, 403, 405, 410, and 1052) were chosen because their instrumentation includes measurements of PM2.5. These sites also provide continuous multi-parameter air-quality and meteorological measurements. Particulate matter (PM2.5, PM10) was sampled along with several trace gases, including ozone (O3), nitrogen oxides (NO, NO2, NOx), sulfur dioxide (SO2), and carbon monoxide (CO). The data set also contains standard surface meteorological parameters (temperature, humidity, pressure, wind speed, and wind direction). Several sites also include AutoGC-based measurements of volatile organic compounds (VOCs). Air monitoring instruments deployed at the selected sites comprise the following systems: BAM-1020 or TEOM (PM2.5), Thermo Scientific TEI 49i (O3), TEI 42i (NOx), and AutoGCs (VOCs). This data set is similar to the data included within the houairq5mX1.00 datastream, except for a few additional quality control steps. A systematic data cleaning and verification process was performed on the data set to ensure its quality and preparation for analysis. Removal of non-numeric status flags (e.g., [LIM], [QAS], [SPZ], [CAL], [PMA], [AQI], [SPN], [MAL]) was accomplished by employing rule-based string parsing to extract valid numerical values. Missing entries were set to -9999; however, invalid or anomalous values (e.g., 99999) were retained as originally reported by the TCEQ to preserve data provenance. The time sequence was verified for completeness, removal of duplicates, and uniformity at 5-minute intervals. Column labeling was standardized, and corresponding values were assessed for physical plausibility. All timestamps in the data set were reported in Coordinated Universal Time (UTC) as provided by the TCEQ. Further, the latitude and longitude coordinates were added for each CAMS site. A subset of the data (June 1–September 30, 2022) has been used in the following publication: Subba et al. 2025. “Implications of sea breeze circulations on boundary layer aerosols in the southern coastal Texas region.” EGUsphere 2025: 1–49, https://doi.org/10.5194/egusphere-2025-2659.
latitude↗
Sensitivity of thermodynamic profiles retrieved from ground-based microwave and infrared observations to additional input data from active remote sensing instruments and numerical weather prediction models
Accurate and continuous estimates of the thermodynamic structure of the lower atmosphere are highly beneficial to meteorological process understanding and its applications, such as weather forecasting. In this study, the Tropospheric Remotely Observed Profiling via Optimal Estimation (TROPoe) physical retrieval is used to retrieve temperature and humidity profiles from various combinations of input data collected by passive and active remote sensing instruments, in situ surface platforms, and numerical weather prediction models. Among the employed instruments are microwave radiometers (MWRs), infrared spectrometers (IRSs), radio acoustic sounding systems (RASSs), ceilometers, and surface sensors. TROPoe uses brightness temperatures and/or radiances from MWRs and IRSs, as well as other observational inputs (virtual temperature from the RASS, cloud-base height from the ceilometer, pressure, temperature, and humidity from the surface sensors) in a physical iterative retrieval approach. This starts from a climatologically reasonable profile of temperature and water vapor, with the radiative transfer model iteratively adjusting the assumed temperature and humidity profiles until the derived brightness temperatures and radiances match those observed by the MWR and/or IRS instruments within a specified uncertainty, as well as within the uncertainties of the other observations, if used as input. In this study, due to the uniqueness of the dataset that includes all the above-mentioned sensors, TROPoe is tested with different observational input combinations, some of which also include information higher than 4 km above ground level (a.g.l.) from the operational Rapid Refresh numerical weather prediction model. These temperature and humidity retrievals are assessed against independent collocated radiosonde profiles under non-cloudy conditions to assess the sensitivity of the TROPoe retrievals to different input combinations.
54 ENVIRONMENTAL SCIENCES↗