Search NASA⌕ Search

SEARCH · Search NASA

Results for “OBSERVATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Sub-Femto-g Free Fall for Space-Based Gravitational Wave Observatories: LISA Pathfinder Results

We report the first results of the LISA Pathfinder in-flight experiment. The results demonstrate that two free-falling reference test masses, such as those needed for a space-based gravitational wave observatory like LISA, can be put in free fall with a relative acceleration noise with a square root of the power spectral density of 5.2 +/- 0.1 fm s(exp -2)/square root of Hz, or (0.54 +/- 0.01) x 10(exp -15) g/square root of Hz, with g the standard gravity, for frequencies between 0.7 and 20 mHz. This value is lower than the LISA Pathfinder requirement by more than a factor 5 and within a factor 1.25 of the requirement for the LISA mission, and is compatible with Brownian noise from viscous damping due to the residual gas surrounding the test masses. Above 60 mHz the acceleration noise is dominated by interferometer displacement readout noise at a level of (34.8 +/- 0.3) fm square root of Hz, about 2 orders of magnitude better than requirements. At f less than or equal to 0.5 mHz we observe a low-frequency tail that stays below 12 fm s(exp -2)/square root of Hz down to 0.1 mHz. This performance would allow for a space-based gravitational wave observatory with a sensitivity close to what was originally foreseen for LISA.

space science↗
NASA NTRS2018

Lidar Validation Measurements at the NOAA Mauna Loa Observatory NDACC Station

NASA's Goddard Space Flight Center (GSFC) transported two lidar instruments to the NOAA facility at the Mauna Loa Observatory (MLO) on the Big Island of Hawaii, to participate in an official, extended validation campaign. This site is situated 11,141 ft. above sea level on the side of the mountain. The observatory has been making atmospheric measurements regularly since the 1950's, and has hosted the GSFC Stratospheric Ozone (STROZ) Lidar and the GSFC Aerosol and Temperature (AT) Lidar on several occasions, most recently between November, 2012 and November, 2015. The purpose of this extended deployment was to participate in Network for the Detection of Atmospheric Composition Change (NDACC) Validation campaigns with the JPL Stratospheric Ozone Lidar and the NOAA Temperature, Aerosol and Water Vapor instruments as part of the routine NDACC Validation Protocol.

Lidar↗
NASA NTRS2019

All-Sky Medium-Energy Gamma-Ray Observatory (AMEGO)

The gamma-ray energy range from a few hundred keV (kiloelectronvolts) to a few hundred MeV (megaelectronvolts) has remained largely unexplored since the pioneering but limited observations by COMPTEL (The Imaging Compton Telescope) on the CGRO (Compton Gamma Ray Observatory) (1991-2000). Fundamental astrophysics questions can be addressed by a mission in the MeV range, from astrophysical jets and extreme physics of compact objects to a large population of unidentified objects. Such a mission will also provide critical inputs for multimessenger astrophysics by identifying and exploring the astrophysical objects that produce gravitational waves and neutrinos. To address these questions, we are developing AMEGO: All-sky Medium Energy Gamma-ray Observatory, as a NASA probe-class mission, to investigate the energy range from 200 keV to greater than10 GeV with good energy (ranging from less than 1 percent at the low end to approximately 10 percent at the high end) and angular resolution (from 2 to 6 degrees depending on energy) and with sensitivity a factor of 20-50 better than previous instruments. Measurements at these energies are challenging, mainly due to the fact that two photon interaction processes, Compton scattering and pair production, compete. These interaction processes require different approaches in both detection and data analysis, and consequently in the instrument concept. AMEGO will be capable of measuring both Compton-scattering events at lower energies and pair-production events at higher energies. AMEGO will also have sensitivity to linear polarization of detected radiation at a level of 20 percent minimum detectable polarization from a source 1 percent of the Crab intensity, observed for 106 seconds. AMEGO will be operating mainly in scanning (discovery) mode with a field-of-view of 2.5 sr (Special Relativity) (20 percent of the sky observation any time), with the capability to be pointed to particular regions of interest..

Moiseev, Alexander↗
NASA NTRS2019

Astro2020 APC White Paper Project: The Simons Observatory

The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021 and start a five year survey in 2022. SO has 287 collaborators from 12 countries and 53 institutions, including 85 students and 90 postdocs. The SO experiment in its currently funded form (‘SO-Nominal’) consists of three 0.4 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT). Optimized for minimizing systematic errors in polarization measurements at large angular scales, the SATs will perform a deep, degree-scale survey of 10% of the sky to search for the signature of primordial gravitational waves. The LAT will survey 40% of the sky with arc-minute resolution. These observations will measure (or limit) the sum of neutrino masses, search for light relics, measure the early behavior of Dark Energy, and refine our understanding of the intergalactic medium, clusters and the role of feedback in galaxy formation. With up to ten times the sensitivity and five times the angular resolution of the Planck satellite, and roughly an order of magnitude increase in mapping speed over currently operating (“Stage 3”) experiments, SO will measure the CMB temperature and polarization fluctuations to exquisite precision in six frequency bands from 27 to 280 GHz. SO will rapidly advance CMB science while informing the design of future observatories such as CMB-S4. Construction of SO-Nominal is fully funded, and operations and data analysis are funded for part of the planned five-year observations. We will seek federal funding to complete the observations and analysis of SO-Nominal, at the $25M level. The SO has a low risk and cost efficient upgrade path – the 6 m LAT can accommodate almost twice the baseline number of detectors and the SATs can be duplicated at low cost. We will seek funding at the $75M level for an expansion of the SO (‘SO-Enhanced’) that fills the remaining focal plane in the LAT, adds three SATs, and extends operations by five years, substantially improving our science return. By this time SO may be operating as part of the larger CMB-S4 project. This white paper summarizes and extends material presented in, which describes the science goals of SO-Nominal, and which describe the instrument design.

Abitbol, Maximilian H.↗
NASA NTRSDate not supplied

Commissioning the James Webb Space Telescope Observatory

The James Webb Space Telescope (JWST) is going through final integration and testing and is planned to launch in 2021. The last remaining optical challenge for JWST is to fully align the observatory in flight to meet the optical requirements but this effort involves many system considerations to do this safely and efficiently and the entire effort will take several months. This talk will cover what it takes to deploy and optically commission the telescope including the many interactions and constraints of deployment, thermal, optical, attitude control and contamination properties of the observatory. The talk will cover the final optical requirements that the telescope will need to meet and will provide the roadmap of timelines, cooldown profiles, Wavefront Sensing and Control steps, system constraint considerations, and implementation of lessons learned from the ground test campaign that will result in meeting those optical requirements. The talk will also cover the organizational structure and processes in place to assure this process will be successful and efficient.

Commissioning JWST OBS↗
NASA NTRS2020

Design and Fabrication of Metamaterial Anti-reflection Coatings for the Simons Observatory

The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities, as outlined in The Simons Observatory Collaboration et al. (2019). These telescopes require 33 highly transparent, large aperture, refracting optics. To this end, we developed mechanically robust, highly efficient, metamaterial anti-reflection (AR) coatings with octave bandwidth coverage for silicon optics up to 46 cm in diameter for the 22-55, 75-165, and 190-310 GHz bands. We detail the design, the manufacturing approach to fabricate the SO lenses, their performance, and possible extensions of metamaterial AR coatings to optical elements made of harder materials such as alumina.

Joseph E. Golec↗
NASA NTRS2020

Detectability of Molecular Signatures on TRAPPIST-1e through Transmission Spectroscopy Simulated for Future Space-based Observatories

Discoveries of terrestrial, Earth-sized exoplanets that lie within the habitable zone(HZ)of their host stars continu eto occur at increasing rates. Transit spectroscopy can potentially enable the detection of molecular signatures fromsuch worlds, providing an indication of the presence of an atmosphere and its chemical composition, includinggases potentially indicative of a biosphere. Such planets around nearby M-dwarf stars—such as TRAPPIST-1—provide a relatively good signal, high signal-to-noise ratio, and frequent transits for follow-up spectroscopy.However, even with these advantages, transit spectroscopy of terrestrial planets in the HZ of nearby M-stars willstill be a challenge. Herein, we examine the potential for future space observatories to conduct such observations,using a global climate model, a photochemical model, and a radiative transfer suite to simulate modern-Earth-likeatmospheric boundary conditions on TRAPPIST-1e. The detectability of biosignatures on such an atmosphere viatransmission spectroscopy is modeled for various instruments of the James Webb Space Telescope, Large UV/Optical/Infrared Surveyor, Habitable Exoplanet Observatory, and Origins. We show that only CO2at 4.3μm would be detectable at the>5σlevel in transmission spectroscopy, when clouds are included in our simulations.This is because the impact of clouds on scale height strongly limits the detectability of molecules in the atmosphere. Synergies between space- and ground-based spectroscopy may be essential in order to overcome these difficulties.

Daria Pidhorodetska↗
NASA NTRS2020

The Habitable Exoplanet Observatory (HabE) Mission Concept

The Habitable Exoplanet Observatory (HabEx), was one of four candidate flagship missions studied in detail by NASA, which were submitted for consideration to the 2020 Decadal Survey in Astronomy and Astrophysics for possible launch in the 2030s. For the first time in human history, technologies have matured sufficiently to enable an affordable spacebased telescope mission capable of discovering and characterizing Earthlike planets orbiting nearby bright sunlike stars to search for signs of habitability and biosignatures. Such a mission can also be equipped with instrumentation that will enable broad and exciting general astrophysics and planetary science not possible from current or planned facilities. HabEx was designed to be the Great Observatory of the 2030s and beyond, with unique imaging and multi-object spectroscopic capabilities at wavelengths ranging from ultraviolet (UV) to near-IR.

Warfield, Keith↗
NASA NTRS2021

A Century of Tidal Variability in the North Pacific Extracted from Hourly Geomagnetic Observatory Measurements at Honolulu

Previous analyses of hourly tide-gauge data taken at Honolulu since 1905 have shown that both sea level and the amplitude of the tides have increased synchronously over time, and a process has been proposed whereby the common cause is an increase in ocean temperature. Validation with independent data of this change in tides, as well as the proposed cause, has been lacking Ocean tides also generate magnetic fields that reach far outside the ocean, and tidal signals are clearly seen in the hourly data since 1905 from the Honolulu geomagnetic observatory. Here, it is found that the tidal amplitudes have increased synchronously in the tide-gauge and magnetic records, providing independent support for the previous results. Further information about the changing ocean is likely contained in the historical data from geomagnetic observatories as well as the global coverage of modern satellite magnetic surveys.

Robert H Tyler↗
NASA NTRS2021

Scheduling and Operations of the Orbiting Carbon Observatory-3 Mission

This paper describes the development and use of an automated scheduling system for the National Aeronautics and Space Administration’s (NASA) Orbiting Carbon Observatory-3 (OCO-3) Mission. OCO-3 measures atmospheric carbon dioxide from space. Made from the spare instrument built as a backup to the Orbiting Carbon Observatory-2 (OCO-2), OCO-3 extends the rich set of data collected by OCO-2. OCO-3 is outfitted with an agile Pointing Mirror Assembly (PMA) that allows for more detailed types of observations and rapid mode transitions. The mission uses an adaptation of the Compressed Large-scale Activity Scheduling and Planning (CLASP) system for scheduling nominal operations, as well as a separate automated scheduling system developed for scheduling observations for the calibration of the PMA. CLASP is used to schedule the four types of observational modes: Nadir, Glint, Target, and Snapshot Area Map. OCO-3 has a variety of complex mission-specific geometric constraints that were incorporated into CLASP to produce schedules that ensure instrument safety.

Moy, Alan↗
NASA NTRSDate not supplied

Cal X-1, a Pioneer mission for absolute in-orbit flux calibration for current and future X-ray observatories

X-ray astronomy missions are now making observations capable of answering fundamental physics and cosmology questions. However, those studies are often limited by lack of absolute X-ray flux calibration; the most powerful X-ray observatories reveal discrepancies in the source fluxes at the 10-20% level. These discrepancies are plausibly related to changes in the instrument performance between the ground calibration and the orbit. We propose to overcome this problem by establishing "standard candles" in the X-ray sky. Our Cal X-1 mission, a Pioneer concept, will consist of 2 small satellites flying in tandem. One will have an X-ray telescope and the other, a pair of absolutely-calibrated X-ray sources (E=1.5 keV and 6 keV). The telescope will ping-pong between the source satellite and several well-chosen constant celestial sources, determining the accurate fluxes of those sources and turning them into standard candles for all other X-ray observatories, current and future.

Maxim Markevitch↗
NASA NTRS2021

Application of Micro-thrusters for Space Observatory Precision Attitude Control

This paper describes the results of a NASA investigation into the benefits of micro-thrusters compared to reaction wheels on future observatory-class missions with tight pointing stability requirements. Pointing repeatability and stability (i.e., jitter) requirements are key for space telescope missions of the future. For example, managing jitter is essential to being able to “image” planets orbiting distant stars. Jitter requirements for missions in this class are difficult to meet with current reaction wheel-based architectures. The reaction wheels are typically the largest pointing disturbance on the spacecraft. Disturbances from reaction wheels can be mitigated, typically by mechanically isolating the wheels, which imposes system complexity and cost. Thrusters capable of thrust forces in the micronewton (μN) range (referred to as micro-thrusters or micronewton thrusters) have been developed to support the Laser Interferometer Space Antenna (LISA) mission, which requires drag-free control to place a test mass in near-perfect free-fall Beyond the drag-free control application, micro-thrusters could be used as a substitute for reaction wheels or as a supplement to wheels for fine pointing control. Used in this fashion, micro-thrusters have potential for reducing the cost and technical risks of achieving demanding pointing stability performance on observatory-class missions.

Chiang, Richard Y.↗
NASA NTRS2022

NASA's Earth System Observatory— Atmosphere Observing System

NASA has begun pre-formulation studies for the Earth System Observatory, a constellation of observatories designed to implement the recommendations of the 2017 NASA Earth Science Decadal Survey. For the atmosphere, the Atmosphere Observing System (AOS) will focus on aerosols, clouds, convection, and precipitation, their mutual interactions, and interactions with atmospheric radiation. AOS consists of two projects, one in an inclined orbit to measure sub-daily variability across all times of day, particularly for deep convection and its attendant high clouds, and one in a polar orbit to provide globally distributed observations with more advanced capabilities, coupling to radiation, and an eye toward continuity of key cloud and aerosol data records. This paper describes the AOS science objectives, the architectures of the two projects, planned sub-orbital activities, and relevant applications.

Scott A Braun↗
NASA NTRS2024

The INAF Campo Imperatore Observatory in Abruzzo (Italy) as an Earth Observation Facility for the Study of Venus Night Airglows (VNAs)

The National Institute for Astrophysics (INAF) Campo Imperatore Observatory is located in the Gran Sasso mountains in Abruzzo, Italy, at an altitude of 2150 m above the sea level. The atmospheric transparency, along with the climatic conditions - especially in winter - have always made it a suitable site for observations in the near infrared (1 - 2 micron). The Campo Imperatore Observatory is equipped with the AZT-24 reflecting telescope, Ritchey-Chrétien configuration, with an aperture of 1.1 m. The new motorization system – currently in the commissioning phase - will allow great pointing and tracking accuracy (<0.1 arcsec), as well as an uncommonly fast-tracking speed (the mechanics is designed to reach 3 degrees/second). With this facility we are starting the ADvanced VENus’ Night Airglows Near-infrared Telescope (ADVENANT) project, which aims to observe and study Venus’ nightside airglows (VNAs).

P. D'Incecco↗
NASA NTRS2024

The Simons Observatory: Beam Characterization for the Small Aperture Telescopes

We use time-domain simulations of Jupiter observations to test and develop a beam reconstruction pipeline for the Simons Observatory Small Aperture Telescopes. The method relies on a mapmaker that estimates and subtracts correlated atmospheric noise and a beam fitting code designed to compensate for the bias caused by the mapmaker. We test our reconstruction performance for four different frequency bands against various algorithmic parameters, atmospheric conditions, and input beams. We additionally show the reconstruction quality as a function of the number of available observations and investigate how different calibration strategies affect the beam uncertainty. For all of the cases considered, we find good agreement between the fitted results and the input beam model within an ∼1.5% error for a multipole range ℓ = 30–700 and an ∼0.5% error for a multipole range ℓ = 50–200. We conclude by using a harmonic-domain component separation algorithm to verify that the beam reconstruction errors and biases observed in our analysis do not significantly bias the Simons Observatory r-measurement.

Cosmic microwave background radiation↗
NASA NTRS2024

HPIC: The Habitable Worlds Observatory Preliminary Input Catalog

The Habitable Worlds Observatory Preliminary Input Catalog (HPIC) is a list of ∼13,000 nearby bright stars that will be potential targets for the Habitable Worlds Observatory (HWO) in its search for Earth-sized planets around Sun-like stars. We construct this target list using the TESS and Gaia DR3 catalogs and develop an automated pipeline to compile stellar measurements and derived astrophysical properties for all stars. We benchmark the stellar properties in the HPIC relative to those of the manually curated ExEP HWO Precursor Science Stars list and find that, for the 164 best targets for exo-Earth direct imaging, our stellar properties are consistent. We demonstrate the utility of the HPIC by using it as an input for yield calculations to predict the science output of various mission designs, including those with larger telescope diameters and those focused on other planet types besides Earth analogs, such as Jupiter-mass planets. The breadth and completeness of the HPIC is essential for accurate HWO mission trade studies, and it will be useful for other exoplanet studies and general astrophysics studying the population of bright nearby stars.

Noah W. Tuchow↗
NASA NTRS2026

Deep RL for Fast Long-Horizon Operations Scheduling on NASA's Carruthers Geocorona Observatory Mission

Spacecraft operations scheduling is a highly constrained, long-horizon combinatorial optimization problem that traditionally relies on heuristics, constraint programming, or manual planning. We present a scalable deep reinforcement learning framework developed and deployed for NASA’s Carruthers Geocorona Observatory mission. Our framework introduces a macro-action abstraction known as activity blocks coupled with dynamic action-masking to navigate the intractably large search space and strictly enforce complex power, thermal, and instrument constraints. The resulting architecture generates globally feasible schedules with overwhelming probability, establishes operational trust, and executes a full training cycle in under six hours, circumventing the need for policy robustness by enabling rapid, on-demand retraining. Further, resulting schedules outperform baseline heuristics in scheduled science quality. The deep reinforcement learning framework was deployed as the default operational scheduler for the Carruthers Geocorona Observatory mission from the outset of the mission, demonstrating that deep reinforcement learning can be trusted for real spacecraft operations under complex, evolving constraints.

Geocorona↗
NASA NTRSDate not supplied

High EneRgy Observatory for Imaging X-rays (HEROIX) Mission Concept

The High EneRgy Observatory for Imaging X-rays (HEROIX) is a next-generation broadband X-ray space telescope concept under development as a Medium-Class Explorer mission. Building on more than three decades of replicated NiCo shell technology at NASA’s Marshall Space Flight Center, HEROIX will deliver 5 arcsecond half-power-diameter imaging resolution in the hard X-ray band. The observatory will incorporate four co-aligned telescopes with advanced multilayer coatings, extending the bandpass into the hard X-ray regime and providing an integrated effective area of 380 cm² at 30 keV. A suite of focal plane detectors will enable imaging capability throughout its 1–80 keV bandpass. This combination of angular resolution and high-energy coverage will open new windows into non-thermal processes in extreme astrophysical environments. HEROIXwill deliver transformative science, advancing the astrophysics community’s understanding of supernova physics, the X-ray binary population of the Galactic Center, accretion-driven galaxy evolution, and the origin of the Cosmic X-ray Background.

Nick Thomas↗