Search NASA⌕ Search

SEARCH · Search NASA

Results for “OPTICAL REFLECTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Lunar-surface UV Photometric Investigation of Exospheres (LUPINE): Thermal Modeling of Payload in a Relevant Daylit Environment

Direct upward remote sensing of the moon’s exosphere from a surface vantage can address production of water-related lunar volatiles as well as their exospheric loss, ballistic transport, and ultimate adsorption in permanently shadowed regions (PSRs). Far UV (FUV) dayside measurements of atomic oxygen, liberated from regolith by energetic solar protons and micrometeorite impact, can provide critical insight into the endogenic lunar water cycle by constraining total column density [O] at site of production. A notional Lunar-surface UV Photometric Investigation of Exospheres (LUPINE) instrument is designed to exploit solar-pumped atomic oxygen fluorescence at 130.4-nm, in a manner similar to the Apollo 17 UV Spectrometer (UVS) experiment [Fastie 1973; Feldman and Morrison, 1991] and the LRO Lyman-alpha Mapping Project (LAMP) spectrograph [Cook et al., 2013], by implementing a zenith-directed FUV photometer from the lunar surface at low (± 10°) selenographic latitude during the lunar day. Atomic oxygen production from solar energetic particle impact sources is thought to maximize in near solar noon [Sarantos et al., 2012], and the lander-embedded zenith-directed LUPINE photometer, in contrast to UVS and LAMP twilight measurements from orbit, can potentially capture the full column abundance of lunar regolith liberated oxygen. Herein we describe adaptation of FUV reflective optics, pulse-counting electronics, and scattered-light-suppression technologies developed for LEO FUV photometry for the challenging thermal environment of the daylit lunar surface. Preliminary thermal modeling and TVAC measurements of heritage FUV photometer components suggests that, if allowed to shed ~8W of waste heat into the bus of a reference Commercial Lunar Payload Services (CLPS) lander, the LUPINE photometer will be kept sufficiently cool to limit dark current to less than 20 counts/s. This level of dark signal enables an OI 130.4-nm 3-sigma detection threshold of ~1 mR for assumed 2-hour integrations.

Lunar UV Photometer↗

Utilizing Earth Observations to Model Probable Coastal Wetland Extent, Sea-Level Rise Inundation Risk, and Assess Impacts on Historic Hawaiian Lands

Climate induced sea-level rise poses a risk to coastal areas on the Island of Hawai’i, and many of the island’s historic cultural lands are in danger of becoming overtaken by wetlands or inundation. In partnership with the County of Hawai’i, State of Hawai’i Department of Land and Natural Resources, and Arizona State University, NASA DEVELOP mapped wetland extent and short-term sea-level rise inundation risk. We utilized Earth observations over a 10-year span (2013 – 2022) that included the NASA MEaSUREs Gridded Sea Surface Height Anomalies and MEaSUREs Group for High Resolution Sea Surface Temperature datasets, United States Geological Survey (USGS) Hawaii Digital Elevation Models (DEM), and in situ tidal gauge data. Flood risk index values were acquired for 5 known Hawai’i flood events between 2019 – 2021 from the Global Flood Mapper tool on Google Earth Engine. We used a random forest model to predict short-term sea-level rise inundation risk along the entire coast of Hawai’i. Current wetland extents and probabilistic locations of new wetlands were modeled with the most recently available data from PlanetScope Surface Reflectance optical imagery (2022), USGS 3D Elevation Program (3DEP) 10m DEM (2020), temperature and precipitation data from the Hawai’i Climate Atlas, and soils data from the Hawai’i Soil Atlas (2014) using the Wetland Intrinsic Potential tool. Results indicated locations that had the highest probability of wetland creation. The end products aimed to help the partners prioritize efforts to meeting regulation requirements for wetlands protection, evaluate the inundation risk to historical features, and support decision-making for their Shoreline Setback and Climate Adaption plans.

Lisa Tanh↗

Surface characterization based on optical phase shifting interferometry

Apparatus, techniques and systems for implementing an optical interferometer to measure surfaces, including mapping of instantaneous curvature or in-plane and out-of-plane displacement field gradients of a sample surface based on obtaining and processing four optical interferograms from a common optical reflected beam from the sample surface that are relatively separated in phase by .pi./2.

47 OTHER INSTRUMENTATION↗

Passive absolute age and temperature history sensor

A passive sensor for historic age and temperature sensing, including a first member formed of a first material, the first material being either a metal or a semiconductor material and a second member formed of a second material, the second material being either a metal or a semiconductor material. A surface of the second member is in contact with a surface of the first member such that, over time, the second material of the second member diffuses into the first material of the first member. The rate of diffusion for the second material to diffuse into the first material depends on a temperature of the passive sensor. One of the electrical conductance, the electrical capacitance, the electrical inductance, the optical transmission, the optical reflectance, or the crystalline structure of the passive sensor depends on the amount of the second material that has diffused into the first member.

47 OTHER INSTRUMENTATION↗

The geometrical-optics law of reflection for electromagnetic waves in magnetically confined plasmas: Specular reflection of rays at the last closed flux surface

Within the geometrical-optics approximation, it is shown that the reflection of rays describing the propagation of electromagnetic waves in fusion-grade, magnetically confined plasmas and impinging on the last closed flux surface, or plasma surface, is necessarily specular or mirror-like. More precisely, the component of the wave vector tangential to that surface does not change, whereas the component normal to it reverses its sign while keeping its magnitude. The well-known law of reflection, stating that the angle of incidence equals that of reflection, is thus generalized to anisotropic media.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimizing coherent lidar performance with graded-reflectance laser resonator optics

It is demonstrated how the design of graded-reflectance output coupler unstable laser cavities may be tailored to significantly enhance the overall power transmission efficiency of a given laser system relative to that of a conventional diffractively coupled unstable resonator. The importance of these findings in coherent lidar applications is explained with particular emphasis on projected space-based systems.

Tratt, David M.↗

A New Retrieval of Aerosol Optical Depth from Reflectance Ratios on Partly Cloudy Days: Development and Evaluation

The aerosol optical depth (AOD) is an important parameter for describing the Earth’s radiation budget and hydrologic cycle and it is critical in the context of the cloud-aerosol-precipitation problem. The extracting AOD from satellite-measured cloudy-sky reflectances represents a great challenge in remote sensing studies, where cloud-induced artifacts can be responsible for large uncertainties (up to 140%) in the satellite-derived AOD. We have developed a new method, named the reflectance ratio (RR) method, which presents an effective way to reduce substantially the impact of the cloud contamination on the retrieved AOD. The RR method relies on the well-established fact that clouds reflect about the same amount of sunlight regardless of the wavelength, and thus the reflectance ratio is less sensitive to the radiative effects of clouds than reflectance. For partly cloudy conditions, we examined performance of the RR method using a case study and demonstrated that the RR method has an opportunity to obtain accurate (~5%) and reasonable (~15-30%) estimations of domain-averaged AOD between clouds at 660-nm wavelength and 470-, 870-nm wavelengths, respectively .

Kassianov, Evgueni I.↗

Measuring the complex optical conductivity of graphene by Fabry-Pérot reflectance spectroscopy [Determination of the optical index for few-layer graphene by reflectivity spectroscopy]

Here, we have experimentally studied the optical refractive index of few-layer graphene through reflection spectroscopy at visible wavelengths. A laser scanning microscope (LSM) with a coherent supercontinuum laser source measured the reflectivity of an exfoliated graphene flake on a Si/SiO 2 substrate, containing monolayer, bilayer and trilayer areas, as the wavelength of the laser was varied from 545nm to 710nm. The complex refractive index of few-layer graphene, n-ik, was extracted from the reflectivity contrast to the bare substrate and the Fresnel reflection theory. Since the SiO 2 thickness enters to the modeling as a parameter, it was precisely measured at the location of the sample. It was found that a common constant optical index cannot explain the wavelength-dependent reflectivity data for single-, double- and three-layer graphene simultaneously, but rather each individual few-layer graphene possesses a unique optical index whose complex values were precisely and accurately determined from the experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Degradation of MODIS Optics and its Reflective Solar Bands Calibration

The MODerate Resolution Imaging Spectroradiometer (MODIS) has 36 spectral bands with wavelength ranging from 0.41 micron to 14.5 micron and spatial resolution between 0.25, 0.5, and 1.0 km at Nadir. Its ProtoFlight Model (PFM) on the NASA EOS Terra spacecraft has been providing global coverage of the Land, Ocean, and Atmosphere for the science community since the instrument opened its Nadir door on 24 February 2000. The MODIS optical system consists of a 2-sided paddle wheel scan mirror, a fold mirror, a primary mirror, and other aft optics. The sensor's 20 reflective solar bands from 0.41 to 2.1 micron are calibrated on-orbit by a solar diffuser (SD) and a solar diffuser stability monitor (SDSM). In addition to SD, degradation of the MODIS optics in the reflective solar bands has been observed, including variations in degradation between the two sides of the MODIS scan mirror. During MODIS first year of on-orbit operation, the overall degradations at the shortest wavelength (0.41 micron) are about 3% for SD, and in excess of 10% for the MODIS system. In this paper, we will present our degradation analysis results and discuss their impact on the reflective solar bands' on-orbit calibration.

Xiong, X.↗

Cellulose-Based Reflective Liquid Crystal Films as Optical Filters and Solar Gain Regulators

Many promising approaches for designing interactions of synthetic materials with light involve solid optical monocrystals and nanofabricated photonic crystal structures with spatially periodic variations of refractive index. Although their high costs limit current technological applications, remarkably, such photonic and optically anisotropic materials have also evolved throughout nature and enable narrow or broad-band spectral reflection of light. Here we use self-assembly of biomaterial cellulose nanocrystals to obtain three-layer films with helicoidal and nematic-like organization of the cellulose nanoparticles, which mimics naturally occurring polarization-insensitive reflectors found in the wings of Plusiotis resplendens beetles. These films were characterized with polarized optical microscopy and circular dichroism spectrometry, as well as scanning and transmission electron microscopies. These films exhibit high reflectivity tunable within the visible and near-infrared regions of the optical spectrum and may find applications ranging from color filters to smart cloth designs and in solar-gain-regulating building technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-reflectivity high-resolution x-ray crystal optics with diamonds.

Owing to the depth to which hard X-rays penetrate into most materials, it is commonly accepted that the only way to realize hard-X-ray mirrors with near 100% reflectance is under conditions of total external reflection at grazing incidence to a surface. At angles away from grazing incidence, substantial reflectance of hard X-rays occurs only as a result of constructive interference of the waves scattered from periodically ordered atomic planes in crystals (Bragg diffraction). Theory predicts that even at normal incidence the reflection of X-rays from diamond under the Bragg condition should approach 100% - substantially higher than from any other crystal. Here we demonstrate that commercially produced synthetic diamond crystals do indeed show an unprecedented reflecting power at normal incidence and millielectronvolt-narrow reflection bandwidths for hard X-rays. Bragg diffraction measurements of reflectivity and the energy bandwidth show remarkable agreement with theory. Such properties are valuable to the development of hard-X-ray optics, and could greatly assist the realization of fully coherent X-ray sources, such as X-ray free-electron laser oscillators.

07 ISOTOPE AND RADIATION SOURCES↗

Bidirectional Reflectance of Flat, Optically Thick Particulate Layers: An Efficient Radiative Transfer Solution and Applications to Snow and Soil Surfaces

We describe a simple and highly efficient and accurate radiative transfer technique for computing bidirectional reflectance of a macroscopically flat scattering layer composed of nonabsorbing or weakly absorbing, arbitrarily shaped, randomly oriented and randomly distributed particles. The layer is assumed to be homogeneous and optically semi-infinite, and the bidirectional reflection function (BRF) is found by a simple iterative solution of the Ambartsumian's nonlinear integral equation. As an exact Solution of the radiative transfer equation, the reflection function thus obtained fully obeys the fundamental physical laws of energy conservation and reciprocity. Since this technique bypasses the computation of the internal radiation field, it is by far the fastest numerical approach available and can be used as an ideal input for Monte Carlo procedures calculating BRFs of scattering layers with macroscopically rough surfaces. Although the effects of packing density and coherent backscattering are currently neglected, they can also be incorporated. The FORTRAN implementation of the technique is available on the World Wide Web at http://ww,,v.giss.nasa.gov/-crmim/brf.html and can be applied to a wide range of remote sensing, engineering, and biophysical problems. We also examine the potential effect of ice crystal shape on the bidirectional reflectance of flat snow surfaces and the applicability of the Henyey-Greenstein phase function and the 6-Eddington approximation in calculations for soil surfaces.

Mishchenko, Michael I.↗

In Search of Multi-Peaked Reflective Spectrum with Optic Fiber Bragg Grating Sensor for Dynamic Strain Measurement

In a typical optic fiber Bragg grating (FBG) strain measurement, unless in an ideal static laboratory environment, the presence of vibration or often disturbance always exists, which often creates spurious multiple peaks in the reflected spectrum, resulting in a non-unique determination of strain value. In this report we attempt to investigate the origin of this phenomenon by physical arguments and simple numerical simulation. We postulate that the fiber gratings execute small amplitude transverse vibrations changing the optical path in which the reflected light traverses slightly and non-uniformly. Ultimately, this causes the multi-peak reflected spectrum.

Tai, Hsiang↗

A Comparison of Model- and Satellite-Derived Aerosol Optical Depth and Reflectivity

The determination of an accurate quantitative understanding of the role of tropospheric aerosols in the earth's radiation budget is extremely important because forcing by anthropogenic aerosols presently represents one of the most uncertain aspects of climate models. Here the authors present a systematic comparison of three different analyses of satellite-retrieved aerosol optical depth based on the Advanced Very High Resolution Radiometer (AVHRR)- measured radiances with optical depths derived from six different models. Also compared are the model-derived clear-sky reflected shortwave radiation with satellite-measured reflectivities derived from the Earth Radiation Budget Experiment (ERBE) satellite. The three different satellite-derived optical depths differ by between -0.10 and 0.07 optical depth units in comparison to the average of the three analyses depending on latitude and month, but the general features of the retrievals are similar. The models differ by between -0.09 and +0.16 optical depth units from the average of the models. Differences between the average of the models and the average of the satellite analyses range over -0.11 to +0.05 optical depth units. These differences are significant since the annual average clear-sky radiative forcing associated with the difference between the average of the models and the average of the satellite analyses ranges between -3.9 and 0.7 W m(exp -2) depending on latitude and is -1.7 W m (exp -2) on a global average annual basis. Variations in the source strengths of dimethylsulfide (DMS)-derived aerosols and sea salt aerosols can explain differences between the models, and between the models and satellite retrievals of up to 0.2 optical depth units. The comparison of model-generated reflected shortwave radiation and ERBE-measured shortwave radiation is similar in character as a function of latitude to the analysis of modeled and satellite-retrieved optical depths, but the differences between the modeled clear-sky reflected flux and the ERBE clear-sky reflected flux is generally larger than that inferred from the difference between the models and the AVHRR optical depths, especially at high latitudes. The difference between the mean of the models and the ERBE-analyzed clear-sky flux is 1.6 W m(exp -2). The overall comparison indicates that the model-generated aerosol optical depth is systematically lower than that inferred from measurements between the latitudes of 10 and 30 deg S. It is not likely that the shortfall is due to small values of the sea salt optical depth because increases in this component would create modeled optical depths that are larger than those from satellites in the region north of 30 deg N and near 50 deg S. Instead, the source strengths for DMS and biomass aerosols in the models may be too low. Firm conclusions, however, will require better retrieval procedures for the satellites, including better cloud screening procedures, further improvement of the model's treatment of aerosol transport and removal, and a better determination of aerosol source strengths.

Penner, Joyce E.↗

Analysis of 12-700 micron reflectance spectra of three optical black samples

Normal incidence, specular reflectance spectra of three samples of optical black coatings have been measured in 10 filter passbands at effective wavelengths between 12 and 700 microns. Strong absorption, due to amorphous silicate material in the coatings, is found in the 15-50 micron region of each spectrum. Reflecting-layer model calculations are fitted by a nonlinear least-squares routine to the spectra at wavelengths beyond the absorption band to determine far-infrared optical parameters. It is found that, with a similar wavelength dependence, the absorption coefficient of a new black coating (ECP 2200) made by the Minnesota Mining and Manufacturing Company (3M) is less than 1/10 that of the discontinued coating, 3M Black Velvet Nextel. It is also shown that the extinction effect of a very rough substrate is negligible compared with the effects of increased upper surface roughness and coating thickness attendant upon fully covering a very rough substrate.

Smith, S. M.↗

In Situ Measurements of the Reflectances of the LSSTCam Optics and Assessing the Impact of Optical Ghosts

Optical ghosts are image artifacts caused by successive reflections of light between optical surfaces such as lenses, filters, and detectors. These artifacts are unavoidable due to the nonzero reflectances of optical elements and are a major source of contamination for low-surface-brightness science. We use optical ray tracing simulations tuned to observations from LSST Commissioning to quantify the impact of optical ghosts on the LSST data. In particular, we find that ~0.57% of the LSSTCam focal plane is impacted by optical ghosts when averaged across all bands. We also use data from the Collimated Beam Projector to measure the reflectances of various optical elements, generally confirming estimates of ~2% from the systems engineering throughput predictions.

Pai, Aashay↗

Number of terms required in the Fourier expansion of the reflection function for optically thick atmospheres

Computational results are presented for the separate terms in the Fourier expansion of the phase function and the reflection function of a semiinfinite, conservatively scattering atmosphere composed of cloud particles. The calculations involve successive applications of invariant imbedding, doubling, and asymptotic fitting methods to cover the range from very thin to very thick atmospheres. From the results, the ratio of the total reflection function to the first-order reflection function is determined as well as the number of terms required to describe the reflection function to an accuracy of 0.1 percent. The number of terms required depends strongly on the zenith angles of incidence and reflection as well as on details of the phase function. These results are compared with similar results obtained for a Henyey-Greenstein phase function having the same asymmetry factor as in the cloud model.

King, M. D.↗

Comparison of measurements by different instruments of the far-infrared reflectance of rough, optically black coatings

Two comparisons of available specular infrared measurements using identical or very similar coatings reveal that specular BRDF (bidirectional reflectance distribution function) measurements of rough coatings are comparable but that simple measured reflectances are not. This is seen as indicating that the diffuse component of the measured specular reflectance is significantly larger than that of the specular component. It is noted that the diffuse component of the measurement is a convolution of the intrinsic directional reflectivity of the surface with the instrument function and that because the value of that function increases at the wavelengths under consideration, the diffuse component is larger than would otherwise be expected. The BRDF normalization is found to cause a primitive deconvolution of the instrument function and to produce a quantity that is approximately equal to the mean intrinsic directional reflectivity very near the specular direction. The analysis and comparison of data reveal that nonspecular BRDF measurements at angles well outside the instrument function can be calibrated as well by an image of the source upon the detector as by reference to a known surface.

Smith, S. M.↗