Search NASA⌕ Search

SEARCH · Search NASA

Results for “ORIENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Strong growth orientation dependence of strain relaxation in epitaxial (Ba,Sr)TiO{sub 3} films and the resulting dielectric properties

The growth orientation dependence of strain relaxation and the dielectric properties were investigated for (001)- and (111)-epitaxial (Ba,Sr)TiO{sub 3} films. The films were deposited on SrRuO{sub 3}/SrTiO{sub 3} and SrTiO{sub 3} substrates using rf magnetron sputtering. The residual strain was found to be remarkably different between the two orientations, although these lattice mismatches are identical; the strain relaxation of the (001)-epitaxial films is significantly slower than that of the (111)-epitaxial films and is promoted only when the growth rate is very low ({<=}5 nm/h). The observed orientation dependence is discussed with the surface energy for both growth orientations, which influences the growth mode of the films. Due to the large contrast of the strain in the (001)- and (111)-epitaxial films, the paraelectric to ferroelectric phase transition temperature of the (001)-epitaxial films is much higher than that of unstrained bulks, while the (111)-epitaxial films show a phase transition temperature corresponding to that of unstrained bulks regardless of the growth rates.

36 MATERIALS SCIENCE↗

Investigation of easy axis orientation of Nd-Fe-B melt-spun ribbons produced by hot rolling and influence of Ti-C addition

The c-axis orientation of Nd-Fe-B melt-spun ribbons caused by hot rolling and the influence of Ti-C addition were investigated. A small roll was placed on a steel wheel near a quartz tube in such a manner that the melt-spun ribbons were hot rolled immediately after quenching. X-ray diffraction patterns measured on both surfaces of the Nd-Fe-B-Ti ribbon indicate that the c-axis is oriented normal to the ribbon plane. The domain pattern of the Nd-Fe-B-Ti-C ribbon was observed with a Kerr microscope. Most of the grains exhibit a maze domain configuration, indicating that the c-axis is oriented normal to the ribbon plane. Furthermore, it was demonstrated that hot rolling and the addition of Ti-C promote c-axis orientation and high coercivity of Nd-Fe-B melt-spun ribbons.

36 MATERIALS SCIENCE↗

Femtosecond electron diffraction: Preparation and characterization of (110)-oriented bismuth films

Here, we present a new approach to synthesize (110)-oriented ultrathin membranes of bismuth (Bi). This rather exotic orientation was achieved by directing the growth through rationale control of lattice matching. Bi films were hetero-epitaxially grown on the (100)-surface of freshly cleaved potassium chloride crystals. The sample orientation was characterized by x-ray and electron diffraction. In addition, high quality free-standing films were obtained after dissolution of the substrate in water and controlled evaporation. Femtosecond electron diffraction (FED) was, therefore, used to monitor the coherent shear acoustic phonons in (110)-oriented free-standing Bi films produced by impulsive femtosecond optical excitation. The small de Broglie wavelength (flat Ewald sphere) of keV-electrons combined with an off-Bragg detection scheme provided a magnified view of shear atomic motions, i.e., lattice distortions in the transverse direction. All-optical pump-probe experiments are usually insensitive to shear displacements, a fact that makes FED a unique non-contact method to achieve the complete characterization of elastic properties of nanoscale materials.

36 MATERIALS SCIENCE↗

Anisotropy in the hole mobility measured along the [110] and [1{sup ¯}10] orientations in a strained Ge quantum well

In this paper, we report on anisotropic transport properties of strained germanium (sGe) quantum wells grown on Si (001) substrates with p-type doping beneath the sGe channel. Mobility measurements were made along orthogonal [110] directions. The level of measured resistivity anisotropy in the [110] and [1{sup ¯}10] orientations was found to vary between 2 and 9 for different samples. This corresponds to an actual mobility anisotropy ratio of between 1.3 and 2, values that are significantly higher than previously found for sGe. From modeling of the low temperature (12 K) mobility, using the relaxation time approach, the anisotropy in mobility was accounted for by a difference in interface roughness scattering between the two orientations. For the [110] orientation, a step height of Δ = 0.28 nm and interface roughness periodicity of λ = 7 nm were found while for the [1{sup ¯}10] orientation, λ reduced to 4 nm and Δ increased to 0.42 nm. High-resolution X-ray diffraction and transmission electron microscopy confirmed a 1° off-cut in the wafer towards the [1{sup ¯}10] direction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intentional anisotropic strain relaxation in (112{sup ¯}2) oriented Al{sub 1−x}In{sub x}N one-dimensionally lattice matched to GaN

We report on (112{sup ¯}2) oriented Al{sub 1−x}In{sub x}N grown by low pressure metal organic vapor phase epitaxy on (112{sup ¯}2) GaN templates on patterned r-plane sapphire. The indium incorporation efficiency as well as the growth rate of (112{sup ¯}2) oriented layers are similar to c-plane oriented Al{sub 1−x}In{sub x}N layers. Deposition of thick Al{sub 1−x}In{sub x}N layers does not lead to additional roughening like in case of c-plane oriented Al{sub 1−x}In{sub x}N. Independent of the thickness, the degree of relaxation of layers lattice matched in m-direction is in the range of 33%–45% in [112{sup ¯}3{sup ¯}]-direction. Associated with the relaxation in [112{sup ¯}3{sup ¯}]-direction, there is a tilt of the Al{sub 1−x}In{sub x}N layers around the [11{sup ¯}00] axis due to slip of threading dislocations on the basal (0001)-plane. Relaxation in m-direction is not observable for layers lattice matched in [112{sup ¯}3{sup ¯}] direction. The possibility to adjust the lattice parameter of AlInN in [112{sup ¯}3{sup ¯}] direction without changing the lattice parameter in m-direction by anisotropic strain relaxation opens up opportunities for subsequent growth of optically active structures. One possibility is to form relaxed buffer layers for GaInN quantum well structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and orientation control of highly cation-ordered epitaxial PbSc{sub 0.5}Ta{sub 0.5}O{sub 3} thin films on Si (100)

Highly cation-ordered (100) and (110)-oriented PbSc{sub 0.5}Ta{sub 0.5}O{sub 3} (PST) films were deposited on buffered Si (100) substrates using pulsed laser deposition. Switching of crystal orientation from (100) to (110) was achieved by replacing the Si (100)/ZrO2:Y2O3 (100)/CeO2 (100)/LaNiO3 (100)/PST (100) heterostructure with Si (100)/ZrO2:Y2O3 (YSZ) (100)/SrRuO3 (110)/PST (110). The out-of-plane and in-plane crystal orientation and internal microstructure of (001) and (110) PST films were analyzed in detail by X-ray diffraction, pole figure measurements, and transmission electron microscopy. XRD superstructure reflections indicate that both (100) and (110) PST films are highly cation-ordered and transmission electron microscopy measurements show nano-domains of 15 nm size. The electrical measurements show that the PST films are ferroelectric and that the ferroelectric properties are linked to the microstructure. We have demonstrated the successful integration of PST films on Si substrates with control on growth orientation; this approach can be extended to other oxides to be integrated on silicon substrates for future device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fourier decomposition of polymer orientation in large-amplitude oscillatory shear flow

In our previous work, we explored the dynamics of a dilute suspension of rigid dumbbells as a model for polymeric liquids in large-amplitude oscillatory shear flow, a flow experiment that has gained a significant following in recent years. We chose rigid dumbbells since these are the simplest molecular model to give higher harmonics in the components of the stress response. We derived the expression for the dumbbell orientation distribution, and then we used this function to calculate the shear stress response, and normal stress difference responses in large-amplitude oscillatory shear flow. In this paper, we deepen our understanding of the polymer motion underlying large-amplitude oscillatory shear flow by decomposing the orientation distribution function into its first five Fourier components (the zeroth, first, second, third, and fourth harmonics). We use three-dimensional images to explore each harmonic of the polymer motion. Our analysis includes the three most important cases: (i) nonlinear steady shear flow (where the Deborah number λω is zero and the Weissenberg number λγ 0 is above unity), (ii) nonlinear viscoelasticity (where both λω and λγ 0 exceed unity), and (iii) linear viscoelasticity (where λω exceeds unity and where λγ 0 approaches zero). We learn that the polymer orientation distribution is spherical in the linear viscoelastic regime, and otherwise tilted and peanut-shaped. We find that the peanut-shaping is mainly caused by the zeroth harmonic, and the tilting, by the second. The first, third, and fourth harmonics of the orientation distribution make only slight contributions to the overall polymer motion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties and structural investigations of (11-22)-oriented GaN/Al{sub 0.5}Ga{sub 0.5}N quantum wells grown by molecular beam epitaxy

We have grown (11-22)-oriented GaN/Al{sub 0.5}Ga{sub 0.5}N quantum wells (QWs) using molecular beam epitaxy on GaN (11-22)-oriented templates grown by metal-organic vapor phase epitaxy on m-plane oriented sapphire substrates. The performance of epitaxial growth of GaN/Al{sub 0.5}Ga{sub 0.5}N heterostructures on the semi-polar orientation (11-22) in terms of surface roughness and structural properties, i.e., strain relaxation mechanisms is discussed. In addition, high resolution transmission electron microscopy reveals very smooth QW interfaces. The photoluminescence of such samples are strictly originating from radiative recombination of free excitons for temperatures above 100 K. At high temperature, the population of localized excitons, moderately trapped (5 meV) at low temperature, is negligible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Band offsets for biaxially and uniaxially stressed silicon-germanium layers with arbitrary substrate and channel orientations

The conduction and valence band offsets between a strained silicon-germanium layer and a silicon-germanium substrate are reported for arbitrary substrate and channel crystal orientations. The offsets are calculated both for the case of biaxial stress, corresponding approximately to the stress state of a thin strained channel in a planar field-effect transistor (FET), and for uniaxial stress, which is the approximate stress state for strained channels in a FinFET configuration. Significant orientation dependence is found for the conduction band offset, overall leading to the strongest electron quantum confinement in biaxial-tensile stressed channels on {100}-oriented substrates, and uniaxial-tensile stressed channels in the 〈100〉 and 〈110〉 directions. For biaxially stressed layers on {111} substrates, the conduction band offset is significantly smaller than for {100} or {110} directions. For the valence band offset, the dependence on crystal orientation is found to be small.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Avoiding polar catastrophe in the growth of polarly orientated nickel perovskite thin films by reactive oxide molecular beam epitaxy

By means of the state-of-the-art reactive oxide molecular beam epitaxy, we synthesized (001)- and (111)-orientated polar LaNiO{sub 3} thin films. In order to avoid the interfacial reconstructions induced by polar catastrophe, screening metallic Nb-doped SrTiO{sub 3} and iso-polarity LaAlO{sub 3} substrates were chosen to achieve high-quality (001)-orientated films in a layer-by-layer growth mode. For largely polar (111)-orientated films, we showed that iso-polarity LaAlO{sub 3} (111) substrate was more suitable than Nb-doped SrTiO{sub 3}. In situ reflection high-energy electron diffraction, ex situ high-resolution X-ray diffraction, and atomic force microscopy were used to characterize these films. Our results show that special attentions need to be paid to grow high-quality oxide films with polar orientations, which can prompt the explorations of all-oxide electronics and artificial interfacial engineering to pursue intriguing emergent physics like proposed interfacial superconductivity and topological phases in LaNiO{sub 3} based superlattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic domain configuration of (111)-oriented LaFeO 3 epitaxial thin films

In antiferromagnetic spintronics control of the domains and corresponding spin axis orientation is crucial for devices. Here we investigate the antiferromagnetic axis in (111)-oriented LaFeO 3 SrTiO 3 , which is coupled to structural twin domains. The structural domains have either the orthorhombic a- or b-axis along the in-plane <1$\bar{1}$0> cubic directions of the substrate, and the corresponding magnetic domains have the antiferromagnetic axis in the sample plane. Six degenerate antiferromagnetic axes are found corresponding to the <1$\bar{1}$0> and <11$\bar{2}$> in-plane directions. This is in contrast to the biaxial anisotropy in (001)-oriented films and reflects how crystal orientation can be used to control magnetic anisotropy in antiferromagnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphite to diamond transformation under shock compression: Role of orientational order

To gain insight into the role of orientational order on the shock-induced graphite to diamond phase transformation, three pyrolytic graphite types having different orientational orders were shock-compressed along the average c -axis to peak stresses between 35 and 69 GPa. The materials studied were ZYB-grade highly oriented pyrolytic graphite (HOPG), ZYH-grade HOPG, and as-deposited pyrolytic graphite (PG) having mosaic spreads of 0.8° ± 0.2°, 3.5° ± 1.5°, and ~45°, respectively. Wave profiles, obtained using laser interferometry, show a multiple-wave structure with a distinct, rapid (<10 ns) rise to the high-pressure phase for each graphite type. Multiple-wave profiles, first observed in this study for the less ordered ZYH-grade HOPG and PG samples, show that somewhat poorly oriented pyrolytic graphites also undergo a well-defined phase transformation. Previously, rapid transformation was reported for ZYB-grade but not ZYH-grade HOPG. The measured wave profiles for both HOPG grades are very similar and both grades show a ~22 GPa transformation stress. In contrast, the PG wave profiles are quite different and show a ~46 GPa transformation stress. The continuum results (stress-density states) presented here cannot distinguish between the different high-pressure phases [hexagonal diamond (HD) or cubic diamond] reported in recent x-ray studies. Because ZYB-grade HOPG was recently shown to transform to HD and due to the similar peak states for both HOPG grades, it seems likely that ZYH-grade also transforms into HD. In conclusion, the very different shock responses of PG and HOPG suggest different transformation mechanisms for PG and HOPG, but the high-pressure PG phase remains unclear in the present work.

58 GEOSCIENCES↗

Asymmetry and non-random orientation of the inflight effective beam pattern in the WMAP data

Tentative evidence for statistical anisotropy in the Wilkinson Microwave Anisotropy Probe data was alleged to be due to 'insufficient handling of beam asymmetries'. In this paper, we investigate this issue and develop a method to estimate the shape of the inflight effective beam, particularly the asymmetry and azimuthal orientation. We divide the whole map into square patches and exploit the information in the Fourier space. For patches containing bright extragalactic point sources, we can directly estimate their shapes, from which the inflight effective beam can be estimated. For those without, we estimate the pattern from iso-power contours in two-dimensional Fourier space. We show that the inflight effective beam convolving the signal is indeed non-symmetric for most of the sky, and it is not randomly oriented. Around the ecliptic poles, however, the asymmetry is smaller due to the averaging effect from different orientations of the beam from the scan strategy. The orientations of the effective beam with significant asymmetry are parallel to the lines of ecliptic longitude. In the foreground-cleaned Internal Linear Combination map, however, the systematics caused by beam effect is significantly lessened.

79 ASTRONOMY AND ASTROPHYSICS↗

Orientation-dependent fatigue damage in planar slip metals

Shear banding as a ubiquitous phenomenon is mostly observed in planar slip metals under complex plastic deformation conditions, especially in cyclic deformation. The deformation substructures and local damages during fatigue vary from grain to grain, which depends greatly on the crystallographic orientation. Despite previous extensive studies, the orientation-dependent deformation substructure is still elusive due to the complexity of damage evolution and the limitation of spatial resolution in both reciprocal and real sample spaces by conventional characterization methods. In this study, we conducted synchrotron-based X-ray micro-diffraction (mu XRD) experiments to explore the dependence of localized elastic strains on grain orientation. It is demonstrated that the typical intersection of slip shear bands (SSBs) with Lomer-Cottrell locks (LCLs) are the potential damage locations, which are most likely to form in the near [001]//LD grains. The advanced. XRD with ability of spatially quantify the localized strains/fine orientations opens new opportunities for understanding the microscopic mechanisms of damage and failure in bulk materials.

Li, R G↗

Relative molecular orientation can impact the onset of plasticity in molecular crystals

Abstract Creating or moving dislocations is the first step to dissipating mechanical energy via plastic deformation under contact loading. In molecular crystals there is both a lattice that defines crystal orientation and a relative orientation of the basis of the molecules. We define a normalization parameter which relates strain at yield, the hardness of the bulk crystal, and a distance parameter analogous to a Burgers vector that nominally predicts the relative ease of initiating plasticity in this broad class of materials. Analyzing the yield behavior of 10 different molecular crystals of varying space groups shows the inter-molecular orientation predicts the experimentally observed applied stress needed to nucleate dislocations. When molecules are oriented ‘parallel’ relative to one another the normalized maximum shear stress at the onset of plasticity is on the order of 3–5 times lower than when molecules within the crystal are ‘anti-parallel’, and molecules with a more equiaxed shape fall in between these bounds. This provides an initial indication of a structural feature which predicts the relative ease of initiating plasticity during contact loading in molecular crystals.

36 MATERIALS SCIENCE↗

Retrieval of the molecular orientation distribution from atom-pair angular distributions

Imaging laser-induced rotational dynamics is an important and active field due to its applications in capturing reactions in the molecular frame and in molecular imaging. Experimental measurement of the molecular orientation distribution, as a function of the Euler angles, has only been demonstrated for special cases when the detectable signal is generated along the molecular symmetry axis. Here we developed the general theory that maps the probability density distribution of the molecular orientation to the atom-pair angular distributions for nonlinear molecules. With the theory, the molecular orientation distribution can be retrieved from the measured atom-pair angular distribution, which we demonstrate experimentally using ultrafast electron diffractive imaging of impulsively aligned trifluoro-iodomethane molecules. Here, the retrieved molecular orientation distribution is in good agreement with direct numerical simulations of the time-dependent Schrodinger equation using the experimental conditions. Unlike the existing retrieval methods, the retrieval method does not require solving Schrodinger equation, works for any alignment method, and is in principle applicable to asymmetric top molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ionization of one- and three-dimensionally-oriented asymmetric-top molecules by intense circularly polarized femtosecond laser pulses

We present a combined experimental and theoretical study on strong-field ionization of a three-dimensionally-oriented asymmetric top molecule, benzonitrile (C{sub 7}H{sub 5}N), by circularly polarized, nonresonant femtosecond laser pulses. Prior to the interaction with the strong field, the molecules are quantum-state selected using a deflector and three-dimensionally (3D) aligned and oriented adiabatically using an elliptically polarized laser pulse in combination with a static electric field. A characteristic splitting in the molecular frame photoelectron momentum distribution reveals the position of the nodal planes of the molecular orbitals from which ionization occurs. The experimental results are supported by a theoretical tunneling model that includes and quantifies the splitting in the momentum distribution. The focus of the present article is to understand strong-field ionization from 3D-oriented asymmetric top molecules, in particular the suppression of electron emission in nodal planes of molecular orbitals. In the preceding article [Dimitrovski et al., Phys. Rev. A 83, 023405 (2011)] the focus is to understand the strong-field ionization of one-dimensionally-oriented polar molecules, in particular asymmetries in the emission direction of the photoelectrons.

74 ATOMIC AND MOLECULAR PHYSICS↗

An Edge Alignment-Based Orientation Selection Method for Neutron Tomography

Neutron computed tomography (nCT) is a 3D char-acterization technique used to image the internal morphology or chemical composition of samples in biology and materials sciences. A typical workflow involves placing the sample in the path of a neutron beam, acquiring projection data at a predefined set of orientations, and processing the resulting data using an analytic reconstruction algorithm. Typical nCT scans require hours to days to complete and are then processed using conventional filtered back-projection (FBP), which performs poorly with sparse views or noisy data. Hence, the main methods in order to reduce overall acquisition time are the use of an improved sampling strategy combined with the use of advanced reconstruction methods such as model-based iterative reconstruction (MBIR). In this paper, we propose an adaptive orientation selection method in which an MBIR reconstruction on previously-acquired measurements is used to define an objective function on orientations that balances a data-fitting term promoting edge alignment and a regularization term promoting orientation diversity. Using simulated and experimental data, we demonstrate that our method produces high-quality reconstructions using significantly fewer total measurements than the conventional approach.

Yang, Diyu↗