Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observing System Simulation Experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Feasibility of fusion plasma burn control via real-time, sub-divertor neutral gas isotopic and compositional analysis

The ability to provide fusion burn control without requiring physical access through the first wall and fuel breeding blankets, would be vital for any future, magnetically confined fusion power reactor. A multi-sensor, fusion fuel cycle exhaust, neutral gas analysis system on JET, capable of delivering real time data, and accessing only the sub-divertor region, provides an excellent example of such capability. Optimized for and operated during the deuterium–tritium experimental campaigns 2 and 3 (DTE2, DTE3), it is proving valuable for planning to explore fusion reactor burn control in ITER with a comparable diagnostic system called the Diagnostic Residual Gas Analyzer (DRGA). This paper aims to show feasibility of developing model-based controllers for ITER and next generation, reactor-relevant devices, by building both on the empirical experience in JET-DTE2, and on the already emerging experience on developing such models specifically for ITER. The paper begins with a specific use-case from JET-DTE2, pertaining to the observed sensitivity of the fusion neutron yield on the concentration of isotopic helium-3 ( 3 He), with data from one of the high-performance DT shots exhibited with emphasis on the 3 He measurement via the sub-divertor. Then, a first model is developed and then explored with simulations that aim to discover how well the controllers in the model react to either insufficient levels of 3 He or excessive levels of 3 He. The simulations then explore potential impact from a delay in the measurement (or the response) that would be comparable to the ∼1 s, conductance limited response for the ITER DRGA system, currently in its final design. The simulations show that control is feasible, and that its effectiveness is not significantly impacted by such delay.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2001

A Post-Flight Comparison Between GPS Signal Generator and On-Orbit Testing Results from the STS-101 and STS-106 SOAR Shuttle Flight Experiment

The use of a GPS Signal Generator (GPSSG) prior to launch for verification of a GPS subsystem and GN&C system on a spacecraft is becoming a very common practice. The level of confidence in the verification created by running a receiver with a GPSSG can greatly impact both schedule and cost of spacecraft development. This paper addresses the comparison of the Space Shuttle STS-101 and STS-106 Space Integrated GPS/INS (SIGI) Orbital Attitude Readiness (SOAR) flight experiments on-orbit performance with the performance from the same receiver on a Global Simulation Systems (GSS) GPSSG. The SOAR flight experiment was designed to demonstrate on-orbit performance of the International Space Station Force-19 GPS receiver. This paper discusses the process involved in getting the post-flight Best Estimate of Trajectory and Best Estimate of Attitude into the GPSSG such that the Force-19 receiver will experience the same trajectory and environmental conditions as observed during the SOAR flight experiment. Results of the comparison conclude with recommendations of how better to construct and interpret results from receiver tests using a GSS GPSSG.

Simpson, James↗
NASA NTRS2002

Vertical Profiles of Latent Heat Release Over the Global Tropics using TRMM Rainfall Products from December 1997 to November 2001

NASA Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) derived rainfall information will be used to estimate the four-dimensional structure of global monthly latent heating and rainfall profiles over the global tropics from December 1997 to November 2000. Rainfall, latent heating and radar reflectivity structures between El Nino (DJF 1997-98) and La Nina (DJF 1998-99) will be examined and compared. The seasonal variation of heating over various geographic locations (i.e., oceanic vs continental, Indian ocean vs west Pacific, Africa vs S. America) will also be analyzed. In addition, the relationship between rainfall, latent heating (maximum heating level), radar reflectivity and SST is examined and will be presented in the meeting. The impact of random error and bias in stratiform percentage estimates from PR on latent heating profiles is studied and will also be presented in the meeting. The Goddard Cumulus Ensemble Model is being used to simulate various mesoscale convective systems that developed in different geographic locations. Specifically, the model estimated rainfall, radar reflectivity and latent heating profiles will be compared to observational data collected from TRMM field campaigns over the South China Sea in 1998 (SCSMEX), Brazil in 1999 (TRMM-LBA), and the central Pacific in 1999 (KWAJEX). Sounding diagnosed heating budgets and radar reflectivity from these experiments can provide the means to validate (heating product) as well as improve the GCE model.

Tao, W.-K.↗
NASA NTRS2002

Vertical Profiles of Latent Heat Release over the Global Tropics using TRMM rainfall products from December 1997 to November 2001

NASA Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) derived rainfall information will be used to estimate the four-dimensional structure of global monthly latent heating and rainfall profiles over the global tropics from December 1997 to November 2001. Rainfall, latent heating and radar reflectivity structures between El Nino (DE 1997-98) and La Nina (DJF 1998-99) will be examined and compared. The seasonal variation of heating over various geographic locations (i.e., oceanic vs continental, Indian ocean vs. west Pacific, Africa vs. S. America) will also be analyzed. In addition, the relationship between rainfall, latent heating (maximum heating level), radar reflectivity and SST is examined and will be presented in the meeting. The impact of random error and bias in strtaiform percentage estimates from PR on latent heating profiles is studied and will also be presented in the meeting. The Goddard Cumulus Ensemble Model is being used to simulate various mesoscale convective systems that developed in different geographic locations. Specifically, the model estimated rainfall, radar reflectivity and latent heating profiles will be compared to observational data collected from TRMM field campaigns over the South China Sea in 1998 (SCSMEX), Brazil in 1999 (TRMM-LBA), and the central Pacific in 1999 (KWAJEX). Sounding diagnosed heating budgets and radar reflectivity from these experiments can provide the means to validate (heating product) as well as improve the GCE model.

Tao, W.-K.↗
NASA NTRS2003

Vertical Profiles of Latent Heat Release over the Global Tropics using TRMM Rainfall Products from December 1997 to November 2002

NASA Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) derived rainfall information will be used to estimate the four-dimensional structure of global monthly latent heating and rainfall profiles over the global tropics from December 1997 to November 2000. Rainfall, latent heating and radar reflectivity structures between El Nino (DJF 1997-98) and La Nina (DJF 1998-99) will be examined and compared. The seasonal variation of heating over various geographic locations (i.e., oceanic vs continental, Indian ocean vs west Pacific, Africa vs. S. America ) will also be analyzed. In addition, the relationship between rainfall, latent heating (maximum heating level), radar reflectivity and SST is examined and will be presented in the meeting. The impact of random error and bias in stratiform percentage estimates from PR on latent heating profiles is studied and will also be presented in the meeting. The Goddard Cumulus Ensemble Model is being used to simulate various mesoscale convective systems that developed in different geographic locations. Specifically, the model estimated rainfall, radar reflectivity and latent heating profiles will be compared to observational data collected from TRMM field campaigns over the South China Sea in 1998 (SCSMEX), Brazil in 1999 (TRMM-LBA), and the central Pacific in 1999 (KWAJEX). Sounding diagnosed heating budgets and radar reflectivity from these experiments can provide the means to validate (heating product) as well as improve the GCE model. Review of other latent heating algorithms will be discussed in the workshop.

Tao, W.-K.↗
NASA NTRS1993

Feasibility study of an orbiting laboratory for testing CSI technology

A concept for an orbiting laboratory for testing Controls-Structures Integration (CSI) technology is described. The CSI-Star concept reflects a lower cost, higher risk approach. The concept supports demonstration and validation testing for critical CSI technologies at a cost of $20M to $26M with a 1-year reliability of approximately 0.9. The Ball Aerospace QuickStar bus is the carrier for the CSI test article. QuickStar is launched as a secondary payload on the McDonnell Douglas Delta 2. The QuickStar/Delta 2 approach is flight proven. The CSI test article is a 20 foot, 1 Hz, truss beam which is deployed from the QuickStar bus. The test article is well instrumented for quality system identification. The laboratory provides three layers of active control consisting of global vibration suppression along the truss beam, vibration isolation between the beam and instrument platforms, and vibration compensation through the use of gimbaled platforms which point lasers relative to optical sensor targets. The configuration simulates the dynamics of multi-instrument science platforms such as those of the Earth Observation System (EOS) while maintaining strong ties to astrophysics missions such as the Optical Interferometer. Uplink/downlink services and a reprogrammable computer provide flexibility for long-term investigations by members of the CSI community (NASA, DoD, academia, and industry). CSI-Star fills the gap between short-term experiments, which have been conducted primarily on the Shuttle, and future science missions which require the technology. The on-orbit maturity of CSI technology must be established to obtain acceptance by project managers and to promote injection of the technology into future science missions.

Bicos, Andrew S.↗
NASA NTRS2001

Sources of Variability in the Stratospheric Column of Nitrogen Dioxide

Instruments such as the Global Ozone Monitoring Experiment (GOME, on the European Remote Sensing Satellite (ERS-2), launched 1995), the Scanning Imaging Absorption Spectrometer for Atmospheric Chartography (SCIAMACHY, on ENVISAT, to be launched July 2001) and the Ozone Monitoring Instrument (OMI on EOS Aura, to be launched 2003) make measurements of the total column of NO2. There is interest in separating the stratospheric and tropospheric contributions to the column, as the tropospheric column provides a measure of pollution. We are using a 3D chemistry and transport model driven by winds from the Goddard Space Flight Center Data Assimilation System to examine variability in the stratospheric NO2 column. Model results for NOx = NO + NO2 + 2N2O5 will be shown to compare well with sunset observations from the Halogen Occultation Experiment on the Upper Atmosphere Research Satellite, and to exhibit similar temporal and spatial dependence. Partitioning between NO, NO2, and N2O5 is also shown to compare well with observations. This good agreement supports the use of simulated fields in the stratosphere to derive the tropospheric column from the total column. Preliminary comparisons of the tropospheric column with model simulations for the troposphere will also be shown.

Douglass, Anne↗
NASA NTRSDate not supplied

Science Performance Comparison Between a Spaceborne HSRL and CALIOP

NASA operates airborne and spaceborne lidar systems to answer aerosol and cloud related science questions. NASA Langley Research Center has extensive experience operating lidar systems in both regimes. These include High Spectral Resolution Lidar (HSRL) systems, which have been operating on airborne systems,and CALIOP, the spaceborne elastic backscatter lidar system on board CALIPSO. In support of NASA’s ACCP Study Plan to address the Aerosol (A) and Cloud, Convection, and Precipitation (CCP) Designated Observables called out in the 2017 Earth Science Decadal Survey, LaRC is using lidar simulation tools to evaluate the performance of spaceborne systems using both the HSRL and elastic backscatter techniques. The LaRC high-fidelity simulator tool models both HSRL and elastic backscatter lidar systems by modeling the effects of the instrument specifications and producing backscatter signals generated from molecules, aerosols, clouds, ocean surface, and ocean subsurface. It derives the solar background signals from the scene specific aerosol and cloud characteristics, surface type, and sun elevation. The tool models both random and systematic uncertainties in the retrieved geophysical parameters. In this study, we will present simulated results that compare and contrast the performance of spaceborne HSRL systems to the performance of CALIOP. As recommended by the Decadal Study, ACCP is seeking advances over performance that has been achieved by A-Train. This study will provide a description of the HSRL and elastic backscatter techniques and demonstrate how and why the performance of these HSRL systems exceeds the performance of CALIOP.

Kathleen A Powell↗
NASA NTRS2023

Assessing the Performance of the South American Land Data Assimilation System Version 2 (SALDAS-2) Energy Balance across Diverse Biomes

Understanding the exchange of energy between the surface and the atmosphere is important in view of the climate scenario. However, it becomes a challenging task due to a sparse network of observations. This study aims to improve the energy balance estimates for the Amazon, Cerrado, and Pampa biomes located in South America using the radiation and precipitation forcing obtained from the Clouds and the Earth’s Radiant Energy System (CERES) and the precipitation CPTEC/MERGE datasets. We employed three surface models—Noah-MP, Community Land Model (CLSM), and Integrated Biosphere Simulator (IBIS)—and conducted modeling experiments, termed South America Land Data Assimilation System (SALDAS-2). The results showed that SALDAS-2 radiation estimates had the smallest errors. Moreover, SALDAS-2 precipitation estimates were better than the Global Land Data Assimilation System (GLDAS) in the Cerrado (MBE = −0.16) and Pampa (MBE = −0.19). Noah-MP presented improvements compared with CLSM and IBIS in 100% of towers located in the Amazon. CLSM tends to overestimate the latent heat flux and underestimate the sensible heat flux in the Amazon. Noah-MP and Ensemble outperformed GLDAS in terms latent and sensible heat fluxes. The potential of SALDAS-2 should be emphasized to provide more accurate estimates of surface energy balance.

modeling↗
NASA NTRS2014

Simultaneous Laser-induced Fluorescence of Nitric Oxide and Atomic Oxygen in the Hypersonic Materials Environment Test System Arcjet Facility

Simultaneous nitric oxide (NO) and atomic oxygen (O) laser induced fluorescence (LIF) experiments were performed in the Hypersonic Materials Environmental Test System (HYMETS) facility at the NASA Langley Research Center. The data serves as an experimental database for validation for chemical and thermal nonequilibrium models used in hypersonic flows. Measurements were taken over a wide range of stagnation enthalpies (6.7 - 18.5 MJ/kg) using an Earth atmosphere simulant with a composition of 75% N2, 20% O2, and 5% Ar (by volume). These are the first simultaneous measurements of NO and O LIF to be reported in literature for the HYMETS facility. The maximum O LIF mean signal intensity was observed at a stagnation enthalpy of approximately 12 MJ/kg while the maximum NO LIF mean signal intensity was observed at a stagnation enthalpy of 6.7 MJ/kg. Experimental results were compared to simple fluorescence model that assumes equilibrium conditions in the plenum and frozen chemistry in the isentropic nozzle expansion (Mach 5). The equilibrium calculations were performed using CANTERA v2.1.1 with 16 species. The fluorescence model captured the correlation in mean O and NO LIF signal intensities over the entire range of stagnation enthalpies tested. Very weak correlations between single-shot O and NO LIF intensities were observed in the experiments at all of the stagnation enthalpy conditions.

Johansen, Craig↗
DOE OSTI2025

Integrating Characteristic Arctic Vegetation in a Land Surface Model Improves Representation of Carbon Dynamics Across a Tundra Landscape: Modeling Archive

This modeling archive is in support of the Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) publication "Integrating Characteristic Arctic Vegetation in a Land Surface Model Improves Representation of Carbon Dynamics Across a Tundra Landscape", by Murphy et al. (2025). This archive contains model input files and outputs from landscape-scale simulations conducted using ELM, the land model component of the Department of Energy’s Energy Exascale Earth System Model (E3SM), at the Council NGEE Arctic field site (Council Road mile marker 71) on Alaska’s Seward Peninsula. Input data and model output from two sets of ELM simulations are provided. The first set of simulations were conducted with the two default ELM Arctic plant functional types (PFTs; broadleaf deciduous boreal shrub and a C3 grass) and the second set of simulations were conducted with a set of nine Arctic-specific PFTs including nonvascular mosses and lichens, graminoids, forbs, evergreen dwarf shrubs, three height classes of deciduous shrubs (dwarf, low, and low to tall), and deciduous alder shrubs (Sulman et al., 2021). Parameter names and major parameter changes in the Arctic-specific PFT configuration are described in Sulman et al. (2021) and archived in the Sulman et al. (2021) dataset (see below). Simulations were spatially explicit, covering an approximately 6.4X3.3 km domain at the Council site with a spatial resolution of 100 m for a total of 2,112 simulated grid cells under each ELM PFT configuration. The modeling archive contains meteorological forcing (seven *.nc files and one *.txt file), a domain definition file (one *.nc files), land surface configuration files (two *.nc files), parameter files (two *.nc files), annual ELM output files spanning 1980-2014 (68 *.nc files), and a User’s Guide (*pdf file). Additional information on the provided files is in the “Modeling Archive Contents” section of the User’s Guide. Model outputs are aggregated to the column scale (i.e. PFT-specific outputs are not provided here).

Murphy, Bailey [ORNL] (ORCID:0000000203995221)↗
DOE OSTI2025

The Role of Leaf Area Changes Within Plant CO 2 Physiological Impacts on the Global Hydrological Cycle

Rising atmospheric CO 2 concentrations enhance greenhouse warming and drive changes to plant physiology, leading to innumerable climate impacts. This study explores the impacts of plant responses on hydrological cycling at 2x preindustrial CO 2 concentrations by analyzing simulations that isolate plant physiological effects using the Community Earth System Model versions 1 and 2. We find that leaf area growth increases canopy evaporation, which offsets transpiration declines, and dampens changes in global mean evapotranspiration, precipitation, and runoff in a CESM2 experiment with dynamic leaf area. These leaf area impacts are also evident in the differences between CESM1 and CESM2, with CESM2 better capturing observed leaf area magnitudes but potentially overestimating leaf area-CO 2 sensitivity, highlighting the importance of plant CO 2 physiology on hydrological cycle changes and the need to improve its representation in climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

HTGR Multiphysics Application Drivers FY26 Updates

This report summarizes FY26 progress under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program's high-temperature gas-cooled reactor (HTGR) application driver work, covering a wide range of activities such as code validation and multi-physics code assessment. 1) A detailed SAM model of the High-Temperature Engineering Test Reactor (HTTR) was developed using a unique-block grouping approach, with an extended parallel thermal network method to capture block-to-block conduction and radiation heat transfer, and applied to steady-state simulations of the HTTR 30~MW and 9~MW cases. 2) In another activity, SAM's newly implemented multi-component gas flow model was validated against the Natural convection Shutdown heat removal Test Facility (NSTF) argon ingress experiment, correctly capturing the density-driven suppression and thermal recovery of natural circulation observed when argon is introduced into the air-cooled Reactor Cavity Cooling System (RCCS) loop. 3) For the OECD/NEA High Temperature Test Facility (HTTF) benchmark, we co-led the international benchmark activities as well as the OECD/NEA final benchmark report to be released at the end of this year. 4) Finally, the coupled Griffin-SAM modeling capability for pebble-bed HTGRs was advanced by verifying the Griffin neutronics solution against Serpent Monte Carlo for a realistic non-uniform temperature distribution, resolving several deficiencies in the SAM-to-Griffin temperature transfer scheme, and enabling distinct fuel kernel, moderator, and coolant temperatures for cross section feedback. These new features were demonstrated in a PBR load-following transient.

Lee, Alvin↗
NASA NTRS1985

Predictions of cardiovascular responses during STS reentry using mathematical models

The physiological adaptation to weightless exposure includes cardiovascular deconditioning arising in part from a loss of total circulating blood volume and resulting in a reduction of orthostatic tolerance. The crew of the Shuttle orbiter are less tolerant to acceleration forces in the head-to-foot direction during the reentry phase of the flight at a time they must function at a high level of performance. The factors that contribute to orthostatic intolerance during and following reentry and to predict the likelihood of impaired crew performance are evaluated. A computer simulation approach employing a mathematical model of the cardiovascular system is employed. It is shown that depending on the severity of blood volume loss, the reentry acceleration stress may be detrimental to physiologic function and may place the physiologic status of the crew near the borderline of some type of impairment. They are in agreement with conclusions from early ground-based experiments and from observations of early Shuttle flights.

Leonard, J. I.↗
NASA NTRS2018

The PMIP4 Contribution to CMIP6 - Part 1: Overview and Over-Arching Analysis Plan

This paper is the first of a series of four GMD (Geoscientific Model Development) papers on the PMIP4-CMIP6 (Paleoclimate Modelling Intercomparison Project - Phase 4 -- Coupled Model Intercomparison Project - Phase 6) experiments. Part 2 (Otto-Bliesner et al., 2017) gives details about the two PMIP4-CMIP6 interglacial experiments, Part 3 (Jungclaus et al., 2017) about the last millennium experiment, and Part 4 (Kageyama et al., 2017) about the Last Glacial Maximum experiment. The mid-Pliocene Warm Period experiment is part of the Pliocene Model Intercomparison Project (PlioMIP) - Phase 2, detailed in Haywood et al. (2016). The goal of the Paleoclimate Modelling Intercomparison Project (PMIP) is to understand the response of the climate system to different climate forcings for documented climatic states very different from the present and historical climates. Through comparison with observations of the environmental impact of these climate changes, or with climate reconstructions based on physical, chemical, or biological records, PMIP also addresses the issue of how well state-of-the-art numerical models simulate climate change. Climate models are usually developed using the present and historical climates as references, but climate projections show that future climates will lie well outside these conditions. Palaeoclimates very different from these reference states therefore provide stringent tests for state-of-the-art models and a way to assess whether their sensitivity to forcings is compatible with palaeoclimatic evidence. Simulations of five different periods have been designed to address the objectives of the sixth phase of the Coupled Model Intercomparison Project (CMIP6): the millennium prior to the industrial epoch (CMIP6 name: past1000); the mid-Holocene, 6000 years ago (midHolocene); the Last Glacial Maximum, 21,000 years ago (lgm); the Last Interglacial, 127,000 years ago (lig127k); and the mid-Pliocene Warm Period, 3.2 million years ago (midPliocene-eoi400). These climatic periods are well documented by palaeoclimatic and palaeoenvironmental records, with climate and environmental changes relevant for the study and projection of future climate changes. This paper describes the motivation for the choice of these periods and the design of the numerical experiments and database requests, with a focus on their novel features compared to the experiments performed in previous phases of PMIP and CMIP. It also outlines the analysis plan that takes advantage of the comparisons of the results across periods and across CMIP6 in collaboration with other MIPs.

climate↗
NASA NTRS2022

Spectral Evolution of Dark Asteroid Surfaces Induced by Space Weathering Over a Decade

The surfaces of airless bodies like asteroids in the solar system are known to be affected by space weathering. Experiments simulating space weathering are essential for studying the effects of this process on meteorite samples, but the problem is that the time spent to reproduce space weathering in these experiments is billions of times shorter than the actual phenomenon. In 2010 December, the T-type asteroid 596 Scheila underwent a collision with an impactor a few tens of meters in size. A decade later, there is an opportunity to study how the surface layer of this asteroid is being altered by space weathering after the impact. To do so, we performed visible spectrophotometric and near-infrared spectroscopic observations of 596 Scheila. The acquired spectrum is consistent with those observed shortly after the 2010 impact event within the observational uncertainty range. This indicates that the surface color of dark asteroids is not noticeably changed by space weathering over a 10 yr period. This study is the first to investigate color changes due to space weathering on an actual asteroid surface in the solar system. Considering that fresh layers are regularly created on asteroid surfaces by collisions, we suggest a genetic link between D/T-type and dark (low albedo) X-complex asteroids and very red objects such as 269 Justitia, 732 Tjilaki, and 203 Pompeja. New observations show that 203 Pompeja has an X-type-like surface, with some local surface areas exhibiting a very red spectrum.

Sunao Hasegawa↗
DOE OSTI2025

Origin of Pulsed Radio Emission from Magnetars

Extended periods of radio pulsations have been observed for six magnetars, displaying characteristics different from those of ordinary pulsars. In this Letter, we argue that radio emission is generated in a closed, twisted magnetic flux bundle originating near the magnetic pole and extending beyond 100 km from the magnetar. The electron–positron flow in the twisted bundle has to carry electric current and, at the same time, experiences a strong drag from the radiation field of the magnetar. This combination forces the plasma into a “radiatively locked” state with a sustained two-stream instability, generating radio emission. We demonstrate this mechanism using novel first-principles simulations that follow the plasma behavior by solving the relativistic Vlasov equation with the discontinuous Galerkin method. First, using one-dimensional simulations, we demonstrate how radiative drag induces the two-stream instability, sustaining turbulent electric fields. When extended to two dimensions, the system produces electromagnetic waves, including superluminal modes capable of escaping the magnetosphere. We measure their frequency and emitted power and incorporate the local simulation results into a global magnetospheric model. The model explains key features of the observed radio emission from magnetars: its appearance after an X-ray outburst, wide pulse profiles, luminosities ∼10 30 erg s −1 , and a broad range of frequencies extending up to ∼100 GHz.

Astronomical simulations↗
NASA NTRS1976

Functional and anatomical characteristics of the nerve-brown adipose interaction in the rat

Experiments were conducted on 12 male rats to study the coupling of signals from the sympathetic nervous system to the brown adipose tissue. Analysis of electron photomicrographs revealed considerable morphological heterogeneity among the nerves entering and leaving the interscapular fat pad. In response to electrical simulation of the nerves, the temperature of the brown fat increased following a rapid but transient temperature drop. Such changes were observed only on the ipsilateral side, indicating that the innervation to the interscapular brown fat of the rat is functionally bilateral rather than diffuse. The finding that brown fat is capable of responding in a graded fashion correlates well with observations suggesting that clusters of brown adipocytes may be electrically coupled.

Flaim, K. E.↗