Search NASA⌕ Search

SEARCH · Search NASA

Results for “Organic electrode materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Biomass-Derived Polymeric Binders in Silicon Anodes for Battery Energy Storage Applications

The demand for portable electronic devices has increased rapidly during the past decade, and has driven a concordant growth in battery production. Since their development as a commercial energy storage solution in the 1990s, lithium-ion batteries (LIBs) have attracted significant attention in both science and industry due to their long cycle life, high energy density, low self-discharge rate, and high working voltage. Production of LIBs requires large amounts of a polymeric binder – commonly polyvinylidene difluoride (PVDF) – for processing and performance purposes. However, since this material is petrochemically-derived, it is far from “green” or sustainable. On the other hand, polymers and their building blocks are found widely throughout nature and can be renewably sourced from biomass at low cost; therefore, replacing PVDF with biomass-derived binders is a promising approach to reduce the environmental footprint of LIBs. Additionally, polymer binders play a critical role in next-generation battery performance. For instance, silicon (Si) is a promising high-capacity anode material for LIBs because of its high theoretical capacity (4200 mA h g –1 ), low working potential, and high abundance in Earth's crust. However, its huge volume change during charge/discharge tends to result in a shortened cycle life, since conventional binders interact only weakly with silicon's native surface and cannot maintain long-term integrity of the electrode. Naturally derived polymers have found better success in this role due to their high structural advantages. In this review, we summarize recent developments in silicon anode binders derived from various biomass sources, with a focus on polymer properties and their effect on battery performance. Further, we propose various perspectives based on our own assessment of these works, and provide a brief commentary on the future outlook of the field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Sustainable Oxide Electrocatalyst for Hydrogen- and Oxygen-Evolution Reactions

In this work, an electrocatalyst for water splitting based on earth-abundant metals is reported. This perovskite-oxide catalyst, CaSrFe 0.75 Co 0.75 Mn 0.5 O 6-δ (CSFCM), is examined using both experimental and computational methods. It demonstrates a combination of properties, which include (a) very high activity for the oxygen-evolution reaction with an overpotential of eta = 0.19 V at 10 mA/cm 2 , (b) high stability over 1000 cycles of catalysis, (c) the ability to catalyze the hydrogen-evolution reaction effectively in both acidic and basic conditions, and (d) catalytic activity as a single-phase bulk material without the need for any additional processing, multicomponent composite preparation, or nanofabrication. Therefore, the catalytic activity of CSFCM is intrinsic, making it a good benchmark compound for future studies of electrocatalytic parameters. This work also highlights the impact of systematic structural design on electrocatalytic activity. Results from density functional theory calculations indicate that in addition to an optimal e g occupancy of similar to 1, an additional descriptor, i.e., maximizing the number of free e g carriers, correlates with the electrocatalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Alkali Cation-Mediated Modulation of CO 2 Reduction Activity on Tin Electrodes in [EMIM][BF 4 ]/H 2 O Electrolytes

The development of efficient CO 2 reduction technologies hinges upon a thorough understanding of the intricate interplay between solution cations and the characteristics of the electrode surface. Recently, ionic liquids (ILs) have emerged as promising electrolytes for the CO 2 reduction reaction. However, the effect of alkali cations on the electrochemical CO 2 reduction (CO 2 R) reaction remains unclear in ILs. Here, in this report, we studied alkali cation effects by assessing the electrocatalytic CO 2 R activity with the IL 1-ethyl-3-methylimidazolium tetrafluoroborate, [EMIM][BF 4 ], in water with alkali metal co-cations (i.e., Li + , Na + , and K + ) using a polycrystalline Sn catalyst. Contrary to previous findings in purely aqueous media with inorganic cations, where alkali cations strongly enhance CO 2 R via pH modulation and strengthening of interfacial electric fields, alkali cations in electrolytes containing the IL [EMIM][BF4] negatively impact CO 2 R activity on Sn electrodes. These results were attributed to the larger radius and higher concentration of the IL organic cation [EMIM] + that mitigates the impact of alkali cations. These findings highlight the complex interplay between IL cations and alkali metals in shaping CO 2 R performance.

Chemistry↗
DOE OSTI2022

Electrodeposited Sn–Cu@Sn dendrites for selective electrochemical CO 2 reduction to formic acid

Large-scale CO 2 electrolysis can be applied to store renewable energy in chemicals. Recent developments in gas diffusion electrodes now enable a commercially relevant current density. However, the low selectivity of the CO 2 reduction reaction (CO 2 RR) still hinders practical applications. The selectivity of the CO 2 RR highly depends on the electrocatalyst. Sn catalysts are considered promising cathode materials for the production of formic acid. The selectivity of Sn catalysts can be regulated by controlling their morphology or alloying them with secondary metals. In this work, we enhanced the selectivity of CO 2 reduction to formic acid by synthesizing Sn–Cu@Sn dendrites that have a core@shell architecture. The Sn–Cu@Sn dendrites were prepared by a scalable electro-deposition method. The electronic structure was modified to suppress a reaction pathway for CO production on the Sn surface. Notably, the Sn shell inhibited the cathodic corrosion of Cu during the CO 2 RR. On a gas diffusion electrode, the Sn–Cu@Sn dendrites exhibited 84.2% faraday efficiency to formic acid for 120 h with high stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Intercalation of Lithium into Graphite: Insights from First-Principles Simulations

Understanding ion intercalation at electrode–electrolyte interfaces is key to the development of energy storage and water desalination. Here, we investigate Li + kinetics at a prototypical interface between graphite anodes and an organic electrolyte, and we elucidate key factors that determine ion transport, using first-principles methodology coupling ab initio molecular dynamics simulations with a solvation model. We show that surface chemical composition significantly influences the kinetics of ion intercalation from the liquid into graphite. We find that this is partly related to the ion desolvation process, which varies notably for different graphite surface chemical terminations. In addition, interfacial polarization is found to play an important role in determining energy barriers for ion transfer. We also discuss the impact of electrode potentials, which is often neglected in conventional first-principles calculations despite being a key factor in device configurations. Our study provides insights into the coupling of electronic and ionic effects of interfacial chemistry on ion transport at complex electrode–electrolyte interfaces.

25 ENERGY STORAGE↗
DOE OSTI2020

A review of composite polymer-ceramic electrolytes for lithium batteries

All solid-state lithium batteries are garnering attention in both academia and industry. Lithium-ion conductive polymers and lithium-ion conductive ceramics are the two major classes of solid electrolytes that have prevalently been pursued for many years. However, each of them has its own advantages and disadvantages. One approach to overcome the disadvantages and get the best out of each of those materials is a solid composite electrolyte that combines the advantages of inorganic ceramic electrolytes and solid polymer electrolytes. Such composite electrolytes can offer acceptable ionic conductivity, high mechanical strength, and favorable interfacial contact with electrodes, which can greatly improve the electrochemical performance of all-solid-state batteries compared to cells based on a polymer electrolyte alone or a ceramic electrolyte alone. We present in this review the state-of-the-art composite polymer-ceramic electrolytes in view of their electrochemical and physical properties for the applications in lithium batteries. The review mainly encompasses the polymer matrices, various ceramic filler materials, and the polymer/ceramics composite systems. Specifically, the structures, ionic conductivities, electrochemical/chemical stabilities, and fabrications of solid composite electrolytes are discussed in-depth. On the basis of previous work, a perspective on future research directions is highlighted for developing high-performance composite polymer-ceramic electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2021

Catalytic open-circuit passivation by thin metal oxide films of p-Si anodes in aqueous alkaline electrolytes

Ni and NiO x -based protective thin films are shown to catalyze the oxidation of Si in the presence of O 2 in strongly alkaline KOH(aq) even in the absence of illumination. The O 2 in solution drove the open-circuit potential of the electrode to >0.4 V, which is positive of the Si passivation potential. The elevated electrochemical potential of the surface promoted formation of passive oxides on exposed Si regions of Si/Ni electrodes. Catalytic passivation of Si extended the durability of an np + -Si(100)/NiO x photoanode to >400 h while operating under simulated day/night cycles. In contrast, electrodes without a Ni(O x ) layer and/or without O 2 in solution displayed direct etching of the Si and corrosion pitting during non-illuminated, simulated nighttime episodes of day/night cycling. The O 2 -derived catalyzed passivation of Si using thin films can be generalized to multiple phases of NiO x as well as to materials other than Ni. Finally, relative to operation in aqueous alkaline conditions, decreasing the pH of the electrolyte decreased the dissolution rate of the protective oxide layer formed by the catalyzed passivation process, and consequently increased the durability of the photoanode, but yielded lower photoelectrode fill factors for water oxidation due to the relatively large kinetic overpotentials for the electrocatalyzed oxygen-evolution reaction at near-neutral pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tunable Oxygen Reduction Electrocatalysis by Phenazine-Modified Carbons (Final Report)

This project aims to systematically investigate the fundamental interfacial chemistry that underlies the four-electron, four-proton oxygen reduction reaction (ORR) mediated by heteroatom-doped graphitic carbon electrodes. Heteroatom-doped (Fe, N, etc.) graphitic carbons have emerged as a rich class of materials that are promising ORR catalysts in low temperature fuel cells because of their earth-abundant elements, extremely low cost, environmental harmlessness, and high tolerance to impurities in the fuel stream. However, despite decades of research, systematic efforts to improve the activity, selectivity, and durability of these catalysts has been hampered both by a complex heterogeneous distribution of potential N- and Fe-dopant active sites and by the inability to tune the local electronic structure and environment of the active site with molecular precision. Understanding the fundamental chemistry that influences the turnover-limiting and selectivity determining steps for ORR and other multielectron/multiproton electrocatalytic transformations requires new and innovative methods to prepare heteroatom active sites with molecular precision on carbon surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An In-Depth Exploration of the Electrochemical Oxygen Reduction Reaction (ORR) Phenomenon on Carbon-Based Catalysts in Alkaline and Acidic Mediums

Detailed studies of the electrochemical oxygen reduction reaction (ORR) on catalyst materials are crucial to improving the performance of different electrochemical energy conversion and storage systems (e.g., fuel cells and batteries), as well as numerous chemical synthesis processes. In the effort to reduce the loading of expensive platinum group metal (PGM)-based catalysts for ORR in the electrochemical systems, many carbon-based catalysts have already shown promising results and numerous investigations on those catalysts are in progress. Most of these studies show the catalyst materials’ ORR performance as current density data obtained through the rotating disk electrode (RDE), rotating ring-disk electrode (RRDE) experiments taking cyclic voltammograms (CV) or linear sweep voltammograms (LSV) approaches. However, the provided descriptions or interpretations of those data curves are often ambiguous and recondite which can lead to an erroneous understanding of the ORR phenomenon in those specific systems and inaccurate characterization of the catalyst materials. In this paper, we presented a study of ORR on a newly developed carbon-based catalyst, the nitrogen-doped graphene/metal-organic framework (N-G/MOF), through RDE and RRDE experiments in both alkaline and acidic mediums, taking the LSV approach. The functions and crucial considerations for the different parts of the RDE/RRDE experiment such as the working electrode, reference electrode, counter electrode, electrolyte, and overall RDE/RRDE process are delineated which can serve as guidelines for the new researchers in this field. Experimentally obtained LSV curves’ shapes and their correlations with the possible ORR reaction pathways within the applied potential range are discussed in depth. We also demonstrated how the presence of hydrogen peroxide (H2O2), a possible intermediate of ORR, in the alkaline electrolyte and the concentration of acid in the acidic electrolyte can maneuver the ORR current density output in compliance with the possible ORR pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electrochemically Assisted Single Crystal Growth of Reduced Preyssler Polyoxometalates Decorated with M 2+ ( M = Co, Ni) and Cubane–Like Ni 4 O 4 Units

Polyoxometalates (POMs) are of great interest to the scientific community, and their reduction and nucleation have been well–established by multi–step techniques. The present study develops an electrochemical approach for simultaneous reduction and nucleation of polyoxometalate–containing solids. Herein we report crystal growth of reduced Preyssler polyoxotungstate–based (anionic formula [NaP 5 W 30 O 110 ] 14– ) new crystalline solids made of Preyssler anions interlinked by Co 2+ and Ni 2+ ions. Crystal nucleation and in situ reduction were achieved at room temperature using a two silver wire electrode setup in various aqueous solutions under constant applied potentials. The POM material was deposited on the cathode, and its structure was characterized by X–ray diffraction techniques. The primary structure type observed involves POMs decorated by disordered Co 2+ /Ni 2+ octahedra and fused into 1–D pillars by additional Co 2+ /Ni 2+ octahedra. Additionally, a secondary phase was observed in the Ni–based reactions, where reduced Preyssler anions are decorated by Ni 4 O 4 cubane–like units. To understand the electrochemical process, polarization curves of the electrolyte solutions are presented, suggesting an applied potential best suited for crystal growth. The work highlights the effectiveness of an electrochemical pathway where nucleation and simultaneous reduction of POMs can make novel reduced POM solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Prediction of Highly Selective Electrocatalytic Nitrogen Reduction at Low Overpotential on a Mo-Doped g-GaN Monolayer

Identifying efficient electrocatalysts with low overpotential and high selectivity for producing ammonia from nitrogen gas is essential for any future electrocatalytic nitrogen reduction reaction (NRR)-based ammonia synthesis. Via density functional theory calculations and the computational hydrogen electrode model, we systematically examine the prospect of using a single-transition-metal (TM)-atom-doped graphene-like GaN (g-GaN) monolayer as an electrocatalyst for artificial nitrogen reduction. Among 15 TMs investigated, the Mo-doped g-GaN (Mo@g-GaN) monolayer is the only electrocatalyst predicted to be feasible for the NRR. The Mo@g-GaN monolayer satisfies all screening criteria considered for activating the inert N≡N triple bond effectively, including stabilization of the adsorbed (*) NRR intermediate *NNH and destabilization of the *NH 2 species. This monolayer also possesses sufficient overall stability. A complete analysis of the likely mechanisms involved in the NRR on this catalyst suggests that the Mo@g-GaN monolayer could exhibit promising NRR catalytic activity. It achieves this via one specific (distal) pathway, which has a very low onset potential of –0.33 V vs the reversible hydrogen electrode (RHE), corresponding to a low overpotential of 0.42 V vs the RHE, defined using the measured equilibrium potential for NRR of 0.09 V vs the RHE. The potential-determining step, conversion of *NH 2 to *NH 3 , also exhibits a surmountable barrier of 0.42 eV, suggesting kinetics will be facile. Finally, the Mo@g-GaN monolayer is predicted to exhibit substantial selectivity (~31%) toward ammonia synthesis over the competing hydrogen evolution reaction. The finding presented in this work may open a potential route for artificial ammonia synthesis using a single-atom catalyst under ambient conditions.

25 ENERGY STORAGE↗
DOE OSTI2024

Tri‐Metallic Catalyst for Oxygen Evolution Reaction Enables Continuous Operation of Anion Exchange Membrane Electrolyzer at 1A cm −2 for Hundreds of Hours

Abstract Although numerous efforts are made to synthesize active electrocatalysts for green hydrogen production; catalyst stability, and facile synthesis to scale up the production are still challenging. Herein, the production of novel non‐PGM catalysts for the oxygen reduction reaction (OER) in an alkaline aqueous medium is reported, which is based on the synthesis of a trimetallic metal–organic framework (MOF) precursors. Fine‐tuning of the composition of the metal centers (Ni, Co, and Fe) shows a great effect on OER activity after the MOF undergoes dynamic chemical and structural transformations under OER conditions. In situ characterization reveals the origin of OER activity enhancement as metals’ oxidation state increases, inducing compressive mechanical strain on metal centers, enhancing the electronic conductivity through the formation of oxygen vacancies, and stronger metal–oxygen covalency. Catalysts are used in membrane electrode assembly (MEA) setup within an industrial full‐cell anion exchange membrane electrolyzer (AEMEC), showing a stable performance for 550 h without noticeable decay at 750 and 1000 mA cm −2 industrial level current densities.

Chemistry↗
DOE OSTI2023

Two‐Membrane Dual Non‐Aqueous/Aqueous Electrolyte Flow Cell Operation for Electrochemical Conversion of CO 2 to Methyl Formate

Recently, tandem cathodic reactions have been demonstrated in non-aqueous solvents to couple CO 2 reduction to a secondary reaction to create novel species that are not produced in aqueous CO 2 electrolysis. One reaction that can be performed with high selectivity and durability is the electrochemical conversion of CO 2 to formic acid and in-situ esterification with methanol to produce methyl formate. However, the translation to a high-performance flow electrolyzer is far from trivial, as the non-aqueous catholyte leads to reactor challenges including flooding the gas diffusion electrode. Here, in this study, a two-membrane flow electrolyzer with both anion and cation exchange membranes was used with flowing methanol catholyte and aqueous anolyte. This design prevented methanol from flooding the cathode, which was a pervasive limiting issue for electrolyzers with a single membrane. Methyl formate production at 42.9 % faradaic efficiency was achieved with pure methanol in a flow electrolyzer with stable performance beyond 80 min. However, low-water-content catholyte compositions also led to increased cell resistance and lower operating current densities. Thus, with the present ionomer materials there is a tradeoff between methyl formate selectivity and current density depending on water concentration, highlighting a need for new ionomers tailored for desirable non-aqueous solvents such as methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Carbon Dioxide Conversion to Nanomaterials: Methods, Applications, and Challenges

Anthropogenic carbon dioxide (CO 2 ) emission is one of the biggest global threats that we are confronted with in the 21st century. A lack of prompt action to mitigate the atmospheric CO 2 level could lead to global catastrophic events. As a result of the significance of the aforementioned threat, multiple nations have agreed to enact carbon capture, storage, utilization, and sequestration (CCUS) technologies at academic and industrial scales with the aim of lowering the atmospheric CO 2 level. Although there are many reviews on CCUS technologies, there is a lack of comprehensive review on CO 2 conversion to more economically valuable products, such as nanomaterials. Carbon dioxide capture and conversion into nanomaterials is an interesting research topic in many ways because it contributes to our fundamental knowledge of material conversion, provides alternative ways to reduce atmospheric pollution, and yields lucrative products, which has not been explored broadly. Aside from the positive outcomes, we have a moral obligation to rectify a global threat caused by anthropogenic emission. Herein, we present current methods of converting CO 2 into organic and inorganic nanomaterials with a focus on operating conditions and challenges as well as the potential of nanomaterials in specifically biomedical applications as opposed to extensively reviewed energy-related uses. Furthermore, our review emphasizes the toxicity issues related to using such nanomaterials in biological settings based on literature and other comparable studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ion Conducting Polymer Interfaces for Lithium Metal Anodes: Impact on the Electrodeposition Kinetics

Electrochemical cells that utilize metals (e.g., lithium, sodium, zinc) as anodes are under intense investigation as they are projected to replace the current lithium-ion batteries to serve as a more energy-dense option for commercial applications. In addition, metal electrodes provide opportunities for fundamental research of different phenomena, such as ion transport and electrochemical kinetics, in the complex environment of reactive metal-electrodeposition. In this work, computationally and experimentally the competing effects related to transport and kinetics during the metal electrodeposition process are examined. Using Brownian dynamics simulations, it is shown that slower deposition kinetics results in a more compact and uniform Li morphology. This finding is experimentally implemented by designing ion-containing polymeric coatings on the electrodes that simultaneously provide pathways for lithium-ion transport, while impeding the charge transfer (Li + + e - → Li) at heterogeneous surfaces. It is further shown that these ionic polymer interfaces can significantly extend the cell-lifetime of a lithium metal battery in both ether-based and carbonate-based electrolytes. Through theoretical and experimental investigations, it is found that a low kinetic to transport rate ratio is a major factor in influencing the Li plating morphology. The plating morphology can be further fine-tuned by increasing ionic conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Impact of 5-Hydroxymethylfurfural (HMF)-Metal Interactions on the Electrochemical Reduction Pathways of HMF on Various Metal Electrodes

5-Hydroxymethylfurfural (HMF), which can be derived from lignocellulosic biomass, is an important platform molecule that can be used to produce valuable biofuels and polymeric materials. Electrochemical reduction of HMF is of great interest as it uses water as the hydrogen source and achieves desired reduction reactions at room temperature and ambient pressure. Hydrogenation and hydrogenolysis are two important reactions for reductive HMF conversion. Therefore, elucidating key characteristics of electrocatalysts that govern the selectivity for hydrogenation and hydrogenolysis is critical in rationally developing efficient and selective electrocatalysts. Here in this study, combined experimental and computational investigations are used to demonstrate how the adsorption energy of HMF on metal surfaces and the resulting changes in the intramolecular bond lengths of adsorbed HMF directly impact the reduction pathways of HMF. These results make it possible to rationally understand a general trend in the behaviors observed when using various metal electrodes for HMF reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Improving the Long-term Cycle Performance of xLi 2 MnO 3 ·(1-x)LiMeO 2 /Li 4 Ti 5 O 12 Cells via Prelithiation and Electrolyte Engineering

Toward the development of high energy density and long lifetime batteries for behind-the-meter storage (BTMS) applications, Li- and Mn-rich layered oxide cathode (xLi 2 MnO 3 ·(1-x)LiMeO 2 , Me = Ni, Mn, and etc., LMR-NM) and Li 4 Ti 5 O 12 (LTO) anode system was examined. To mitigate the major degradation mechanisms at each electrode (i.e., loss of Li inventory (LLI) at the anode and transition metal dissolution and oxygen release at the cathode), two approaches were taken—prelithiating the LTO electrode and varying the electrolyte solvent compositions. The effect of prelithiation and electrolyte engineering on the long-term cycle performance of LMR-NM/LTO cells were systematically evaluated via electrochemical analyses and post-mortem characterizations. By using a prelithiated LTO anode and supplying additional Li to the system, the capacity retention of LMR-NM/LTO system was improved. The degree of enhancement was dependent on the types of electrolytes used, as their decomposition products determined the level of LLI. With increased capacity retention, however, the cathode was utilized to a greater extent, resulting in more severe loss of the cathode active material. Thus, all degradation mechanisms should be considered comprehensively when designing high performance LMR-NM/LTO cells to account for their complex interplay.

25 ENERGY STORAGE↗
DOE OSTI2020

3D‐Printed Structure Boosts the Kinetics and Intrinsic Capacitance of Pseudocapacitive Graphene Aerogels

Abstract The performance of pseudocapacitive electrodes at fast charging rates are typically limited by the slow kinetics of Faradaic reactions and sluggish ion diffusion in the bulk structure. This is particularly problematic for thick electrodes and electrodes highly loaded with active materials. Here, a surface‐functionalized 3D‐printed graphene aerogel (SF‐3D GA) is presented that achieves not only a benchmark areal capacitance of 2195 mF cm −2 at a high current density of 100 mA cm −2 but also an ultrahigh intrinsic capacitance of 309.1 µF cm −2 even at a high mass loading of 12.8 mg cm −2 . Importantly, the kinetic analysis reveals that the capacitance of SF‐3D GA electrode is primarily (93.3%) contributed from fast kinetic processes. This is because the 3D‐printed electrode has an open structure that ensures excellent coverage of functional groups on carbon surface and facilitates the ion accessibility of these surface functional groups even at high current densities and large mass loading/electrode thickness. An asymmetric device assembled with SF‐3D GA as anode and 3D‐printed GA decorated with MnO 2 as cathode achieves a remarkable energy density of 0.65 mWh cm −2 at an ultrahigh power density of 164.5 mW cm −2 , outperforming carbon‐based supercapacitors operated at the same power density.

asymmetric supercapacitors↗