Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLANETARY TEMPERATURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Stratospheric effects of solar ultraviolet variations on the solar rotation time scale

A summary is presented of some current work on measurement and interpretation of stratospheric ozone and temperature responses to observed short term solar ultraviolet variations. Although some studies have yielded provisional evidence for a nearly in-phase ozone-solar cycle relationship, they extend at most over only one or two 11 year cycles so the statistical significance of the correlations is not large. Similarly, the relatively short lengths of individual satellite data sets combined with the problem of estimating the effect of changes in instrument sensitivity (drift) during the observing period have complicated attempts to infer long term or solar cycle ozone trends. The solar rotation and active region development time scale provides an alternate time scale for which detailed studies of middle atmospheric ozone and temperature responses to solar ultraviolet variability are currently possible using available satellite data sets. At tropical latitudes where planetary wave amplitudes are relatively small, clear correlative evidence for the existence of middle atmospheric ozone and temperature responses to short term solar ultraviolet variations has been obtained in recent years. These measurements will ultimately allow improved empirical and theoretical calculations of longer term solar induced ozone and temperature variations at low and middle latitudes.

Hood, L. L.↗

The role of high pressure experiment and theory in our understanding of gaseous and icy planets

High pressure experiments provide essential data for modeling planetary structure. Shock wave experiments are often especially suitable because they sample the same region of pressure-temperature space that is achieved naturally within the planet during its evolution. A very brief overview of planetary properties is given, followed by a summary of the issues of current interest: the behavior of hydrogen and hydrogen-rich mixtures; C, N, and O at high pressure, and rock-ice mixtures.

Stevenson, David J.↗

Thermal Modeling on Planetary Regoliths

The thermal region of the spectrum is one of special interest in planetary science as it is the only region where planetary emission is significant. Studying how planetary surfaces emit in the thermal infrared can tell us about their physical makeup and chemical composition, as well as their temperature profile with depth. This abstract will discuss a model of thermal energy transfer in planetary regoliths on airless bodies which includes both conductive and radiative processes while including the time dependence of the solar input function.

Hale, A. S.↗

Low Intensity Low Temperature (LILT) Measurements and Coefficients on New Photovoltaic Structures

Past NASA missions to Mars, Jupiter and the outer planets were powered by radioisotope thermal generators (RTGs). Although these devices proved to be reliable, their high cost and highly toxic radioactive heat source has made them far less desirable for future planetary missions. This has resulted in a renewed search for alternate energy sources, some of them being photovoltaics (PV) and thermophotovoltaics (TPV). Both of these alternate energy sources convert light/thermal energy directly into electricity. In order to create a viable PV data base for planetary mission planners and cell designers, we have compiled low intensity low temperature (LILT) I-V data on single junction and multi-junction high efficiency solar cells. The cells tested here represent the latest photovoltaic technology. Using this LILT data to calculate Short Circuit Current (I(sub sc)), Open Circuit Voltage (V(sub os)), and Fill Factor (FF) as a function of temperature and intensity, an accurate prediction of cell performance under the AM0 spectrum can be determined. When combined with QUantum efficiency at Low Temperature (QULT) data, one can further enhance the data by adding spectral variations to the measurements. This paper presents an overview of LILT measurements and is only intended to be used as a guideline for material selection and performance predictions. As single junction and multi-junction cell technologies emerge, new test data must be collected. Cell materials included are Si, GaAs/Ge, GaInP/GaAs/GaAs, InP, InGaAs/InP, InP/InGaAs/InP, and GaInP. Temperatures range down to as low as -180 C and intensities range from 1 sun down to 0.02 suns. The coefficients presented in this paper represent experimental results and are intended to provide the user with approximate numbers.

Scheiman, David A.↗

Models of Venus atmosphere (1972)

Criteria were developed in the following areas: environment, structures, guidance and control, and chemical propulsion. Quantitative data for the Venus atmosphere were obtained from earth-based observations and from spacecraft which have entered the Venus atmosphere or passed within several planetary radii of the planet. The models provide the temperature, pressure, and density profiles required to perform basic aerodynamic analyses. A set of engineering models are provided for the Venus atmosphere, based on theory and measured data available in January 1972.

Source record↗

Mariner-9 based simulation of radiative convective temperature changes in the Martian dust-laden atmosphere-soil system

A numerical simulation of radiative, conductive, and convective heat transfer of the Martian dust-laden atmosphere-soil system is presented with particular emphasis given to heating/cooling in regions of sharp variation in temperature or absorption and its resultant impact on outgoing planetary spectral radiance, as measured by the Mariner 9 IRIS. Thermal coupling between the ground and atmospheric subsystems is modeled by the total heat flux balance at the interface. In the simulation procedure, local thermodynamic equilibrium (LTE) is assumed, and a combined strong-weak line transmission function permits short- and long-range exchanges of energy from the surface toward space. Direct absorption of insolation in the near-IR bands by both silicate dust and CO2 is incorporated.

Dannevik, W. P.↗

Primordial noble gases in chondrites - The abundance pattern was established in the solar nebula

Ordinary chondrites, like carbonaceous chondrites, contain primordial noble gases mainly in a minor phase comprising not more than 0.05 percent of the meteorite, probably an iron-chromium sulfide. The neon-20/argon-36 ratios decrease with increasing argon-36 concentration, as expected if the gas pattern was established by condensation from the solar nebula, and was negligibly altered by metamorphism in the meteorite parent bodies. Meteoritic and planetary matter apparently condensed over a substantial range of temperatures.

Alaerts, L.↗

Climate warming due to increasing atmospheric CO2 - Simulations with a multilayer coupled atmosphere-ocean seasonal energy balance model

The transient response of the climate to increasing CO2 is studied using a modified version of the multilayer energy balance model of Peng et al. (1982). The main characteristics of the model are described. Latitudinal and seasonal distributions of planetary albedo, latitude-time distributions of zonal mean temperatures, and latitudinal distributions of evaporation, water vapor transport, and snow cover generated from the model and derived from actual observations are analyzed and compared. It is observed that in response to an atmospheric doubling of CO2, the model reaches within 1/e of the equilibrium response of global mean surface temperature in 9-35 years for the probable range of vertical heat diffusivity in the ocean. For CO2 increases projected by the National Research Council (1983), the model's transient response in annually and globally averaged surface temperatures is 60-75 percent of the corresponding equilibrium response, and the disequilibrium increases with increasing heat diffusivity of the ocean.

Li, Peng↗

Methane line parameters from 3700 to 4136/cm

The positions and strengths of about 1900 absorption lines of methane between 3700 and 4136/cm were measured experimentally to provide a reference line list for the identification of weak CH4 features in planetary spectra. The line parameters were obtained at room temperature with accuracies of 0.0002-0.003/cm for positions and + or - 3-40 percent for strengths using spectra recorded at 0.011/cm resolution (unapodized) with a Fourier transform spectrometer at Kitt Peak National Observatory/National Solar Observatory. Individual line strengths range from 0.00002-0.013/sq cm per atm at room temperature, and the sum of the observed strengths is 1.42/sq cm per atm at 297 K. All measurements are reported in natural isotopic abundance.

Brown, Linda R.↗

Comparison of predicted and measured temperatures of UH-60A helicopter transmission

The 2109-kW (2828-hp) UH-60A Black Hawk helicopter transmission was one of the transmissions used to obtain an experimental data base. Component improvements or new transmission concepts can thus be evaluated by comparison with the established data. Results of efficiency and vibration tests of the UH-60A have been reported previously. In this investigation the transmission was instrumented internally and tested over a range of operating conditions. The speed was varied from 50 to 100 percent of the full rated value, and the torque was varied from 10 to 100 percent of the full rated value. Temperatures of internal bearings and gears were measured. The computer program Planetsys was used to simulate the thermal performance of this transmission. The calculated temperatures were then compared with the corresponding measured values. The highest measured temperature was 405 K (270 F) on the outer race of the high-speed input shaft roller bearing, at the 100-percent power condition. In general, the predicted temperatures compared very well with the measured values, most of them being within 5 kelvin (9 F). Specifically, the temperatures predicted for the single-row spherical roller planetary bearing averaged only about 4 kelvin (8 F) lower than the highest measured value.

Coe, Harold H.↗

Thermal evolution of the earth - Effects of volatile exchange between atmosphere and interior

The thermal history of the earth is investigated using a parameterized model of mantle convection, that includes the effects of volatile exchange between the mantle and the surface reservoir and the softening of the mantle by the dissolved volatiles. The mantle degassing rate is taken to be directly proportional to the rate of seafloor spreading which depends on the mantle heat flow. It is shown that the dependence of the mantle viscosity on the volatile content has important effects on the thermal evolution of planetary interiors and the evolution of planetary atmospheres. Degassing is compensated by an increase in temperature, while regassing is compensated by a decrease in temperature. Reasonable degassing scenarios can account for an early rapid formation of the earth's atmosphere inferred from noble gas abundances.

Mcgovern, Patrick J.↗

Chemical differentiation of a convecting planetary interior - Consequences for a one plate planet such as Venus

Simple models of the thermal and chemical evolution of a planetary interior are developed to explore the possible consequences of a chemically buoyant depleted mantle layer for planetary evolution. As the depleted layer thickens the melting temperature at the top of the underlying convecting mantle also increases and the degree of partial melting of the mantle added to the depleted layer decreases. As the less depleted mantle with less positive compositional buoyancy is added, the negative thermal buoyancy of the layer eventually exceeds its positive compositional buoyancy. The depleted layer then sinks into and mixes with the convecting interior. On Venus the population of impact craters is indistinguishable from a random distribution over the surface and gives a surface age of about 500 Myr. It is suggested that the above mechanism may explain this episodic global resurfacing of Venus.

Parmentier, E. M.↗

Atmospheric sounding with the Lidar In-Space Technology Experiment (LITE)

The Lidar In-Space Technology Experiment (LITE) is being developed by NASA Langley Research Center for a series of flights on the Space Shuttle. Using a three-wavelength Nd:YAG laser and a 1-meter-diameter telescope, the system will be used to study clouds, aerosols in the troposphere and stratosphere, density and temperature perturbations of the stratosphere, and characteristics of the planetary boundary layer. Data collected from the system will be used in studies of atmospheric dynamics, meteorology, climate, the radiation budget, biogeochemical processes, and the hydrologic cycle. Additionally, the data will be used to develop retrieval techniques optimized for a spaceborne configuration and to develop requirements for future operational spaceborne lidar systems.

Winker, D. M.↗

Automatic Jet Contrail Detection and Segmentation

Jet contrails are an important subset of cirrus clouds in the atmosphere, and thin cirrus are thought to enhance the greenhouse effect due to their semi-transparent nature. They are nearly transparent to the solar energy reaching the surface, but they reduce the planetary emission to space due to their cold ambient temperatures. Having 'seeded' the environment, contrails often elongate and widen into cirrus-like features. However, there is great uncertainty regarding the impact of contrails on surface temperature and precipitation. With increasing numbers of subsonic aircraft operating in the upper troposphere, there is the possibility of increasing cloudiness which could lead to changes in the radiation balance. Automatic detection and seg- mentation of jet contrails in satellite imagery is important because (1) it is impractical to compile a contrail climatology by hand, and (2) with the segmented images it will be possible to retrieve contrail physical properties such as optical thickness, effective ice crystal diameter and emissivity.

Weiss, J.↗

Acousto-Optic Imaging Spectrometers for Mars Surface Science

NASA's long term plan for Mars sample collection and return requires a highly streamlined approach for spectrally characterizing a landing site, documenting the mineralogical make-up of the site and guiding the collections of samples which represent the diversity of the site. Ideally, image data should be acquired at hundreds of VIS and IR wavelengths, in order to separately distinguish numerous anticipated species, using principal component analysis and linear unmixing. Cameras with bore-sighted point spectrometers can acquire spectra of isolated scene elements, but it requires 10(exp 2) to 10(exp 2) successive motions and precise relative pointing knowledge in order to create a single data cube which qualifies as a spectral map. These and other competing science objectives have to be accomplished within very short lander/rover operational lifetime (a few sols). True, 2-D imaging spectroscopy greatly speeds up the data acquisition process, since the spectra of all pixels in the scene are collected at once. This task can be accomplished with cameras that use electronically tunable acousto-optic tunable filters (AOTFs) as the optical tuning element. AOTFs made from TeO2 are now a mature technology, and operate at wavelengths from near-UV to about 5 microns. Because of incremental improvements in the last few years, present generation devices are rugged, radiation-hard and operate at temperatures down to at least 150K so they can be safely integrated into the ambient temperature optics of in-situ instruments such as planetary or small-body landers. They have been used for ground-based astronomy, and were also baselined for the ST-4 Champollion IR comet lander experiment (CIRCLE), prior to cancellation of the ST-4 mission last year. AIMS (for Acousto-optic Imaging spectrometer), is a prototype lander instrument which is being built at GSFC with support by the NASA OSS Advanced Technologies and Mission Studies, Mars Instrument Definition and Development Program (MIDP). AIMS is capable of tunable spectroscopic imaging of surface mineralogy, ices and dust between 0.5 and 2.4 microns, at a resolving power (lambda/delta lambda) which is typically several hundred. The design spatial resolution, similar to IMP and SSI, will allow mapping at scales down to about 1 cm.

Glenar, D. A.↗