Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRODUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Domestication of Algae for Increasing Biomass Productivity

Microalgae cultivation processes have been developed for the production of a variety of bioproducts, however currently only a few species are used in commercial applications. Their domestication, that is strain improvements, is still in its infancy, with major advances required, specifically to maximize biomass productivity a limiting factor in microalgae production. This requires a deep understanding of algal biology, in particular to develop superior strains without the need of genetic technologies that would require lengthy regulatory permits, and often limit consumer acceptance. Adaptive Laboratory Evolution techniques, alone or in conjunction with sexual recombination, can allow for rapid develop of improved strains and their industrial production. Light harvesting antenna reduction has been a major approach to achieve increased photon utilization efficiency by cultures operating under full sunlight conditions due to higher light saturation levels, allowing for higher productivities under outdoor conditions. Decades of research yielded some promising results under controlled conditions with a few specific mutant strains. However, these failed to achieve the anticipated higher productivities in actual algal mass cultures, in part due to the inability of single mutations to overcome photoinhibition, reactive oxygen species, and other pleiotropic impacts on the complex metabolic processes of photosynthesis. Higher productivity strains will require multiple genetic improvements. We report on recent Adaptive Laboratory Evolution with the green alga Scenedesmus obliquus resulting in higher biomass productivity in open pond cultivation. Coupling our approach with sexual recombination and genome sequencing provides a path to algal domestication suitable for large-scale, low-cost biomass production.

09 BIOMASS FUELS↗
DOE OSTI2020

Microalgae Biomass Production for Utilization of CO2 and Mitigation of Greenhouse Gas Emissions

Microalgal cultivation processes for production of foods, feeds, fuels, fertilizers and other bioproducts and wastewater treatment are being considered for reducing CO2 and other greenhouse gas emissions. Major differences between microalgae and higher plant biomass cultivation are include their potential for much higher productivities, their higher content of major (N-P-K) and minor nutrients, and the challenge of harvesting such microscopic plants. Most critical, microalgal mass cultures, unlike higher plants, currently require fertilization with concentrated sources of CO2. As practically all of the C fixed into algal biomass will be re-emitted into the atmosphere in short order, algae processes do not sequester carbon. Their potential for CO2 emissions reductions must thus be based on comparisons with current technologies for the production of competing products, such as biofuels or animal feeds, or in wastewater treatment. Further, due to economic limitations to flue gas transport (3 to 12 % CO2), as well as highly variable diurnal and seasonal CO2 utilization and limited land and water availability near most CO2 sources, only a small fraction of waste CO2 emissions will be directly utilizeable for microalgae biomass production. However, for long-distance transport, flue gas CO2 capture by chemical processes would greatly increase the costs of flue gas utilization. More concentrated, sources of CO2 from refineries, fertilizer, chemical plants, and fermentations are available, but are also very limited relative to the quantities required for commodity production. Microalgae can also be cultivated on organic wastes, which provide both nutrients (N, P, K, etc.) and organic and inorganic carbon for algal growth, reducing greenhouse gas emissions compared to conventional treatment processes. To maximize the potential for algae biomass production and CO2 utilization, direct capture of CO2 from air will be required. This could be accomplished with the algal cultivation process itself in large open-raceway ponds, through chemical and biological enhancements of CO2 transfer into algal cutures. The relative productivities, economics, greenhouse gas balances, and resource potentials of these alternative CO2 sources for large-scale production of microalgae will be reviewed.

09 BIOMASS FUELS↗
DOE OSTI2024

Achieving Unprecedented CO 2 Utilization InCO 2 Concrete™: System Design, Product Development and Process Demonstration

Anthropogenic sources of carbon dioxide are generated from a number of sources, but the key among these are ordinary Portland cement (OPC) production and combustion of fossil fuels. Cement production is the largest global CO 2 source from the mineral decomposition of carbonates. This is due to the clinkering process whereby limestone (mainly consisting of CaCO 3 ) is decomposed into CaO and CO 2 , and combined with silica rich clays at high temperatures to form clinkers (i.e. the four key minerals that comprise cement). The high temperature range of 1400 – 1550°C required for this process accounts for up to 60% of the generated CO 2 from cement production. Combination of the limestone decomposition and thermal requirements of the clinkering process causes cement production to contribute 8-9% of annual global CO 2 emissions. Combustion of fossil fuels (coal, oil and gas) was shown to contribute a much larger portion of global CO 2 emissions. As of 2018, combustion of fossil fuels accounted for 65% of global CO 2 , where 41% was derived from stationary sources for electricity and heat generation and the other 24% was related to transport. To reduce these contributions, key steps forward in CO 2 utilization technologies are required. Therefore, a CO 2 mineralization technology (CO 2 mineralization concrete) to reduce the OPC content in concrete, while utilizing flue gas emissions from fossil fuel combustion has been developed to address both areas simultaneously. This Reversa™ technology utilizes low-carbon cementation agents produced by in situ CO 2 mineralization (“mineral carbonation reactions”) to offer a promising alternative to OPC. CO 2 mineralization relies upon the reaction of dissolved CO 2 with inorganic alkaline reactants to precipitate mineral carbonates (e.g., CaCO 3 ), which bind proximate particles and achieve cementation. Herein, a concrete green body, which is composed of a mixture of binder, water, and mineral aggregates, is exposed to CO 2 borne in industrial flue gas streams. This manner of CO 2 mineralization allows the production of construction components that feature equivalent engineering attributes as their OPC-based counterparts while featuring a much smaller embodied carbon intensity (eCI). The purpose of this project is to demonstrate the feasibility of the Reversa process evolving from a TRL-3 technology at the bench-scale up to TRL-6 technology at the pilot-scale. The reliability of the Reversa technology was tested to prove the effective production of three standard industrial concrete products selected during the course of the project. The results detailed herein will demonstrate the evolution of this technology to the industrial scale. The culmination of this work resulted in 9 production runs completed at the National Carbon Capture Center (NCCC), Wilsonville, AL, using natural gas (NG) flue gas as the CO 2 source. Over the course of the production runs at NCCC, the CO 2 utilization as a function of time, 24-h CO 2 uptake, electricity usage, and 28-d net area compressive strength recorded for each run. Collection of this data will be used to determine the success of the demonstration goals: (1) achieving in excess of 0.2gCO 2 /g reactant , (2) achieving greater than 50% reduction in global warming potential compared to standard produced units, and (3) ensuring compliance of carbonated concrete with industry standard specifications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Baseline Hypothetical Facility for the Production of 131 I and 99 Mo using Activation Targets

This report describes a hypothetical facility for production of medical radioisotopes via activation under the Proliferation Resistance and Optimization (PRO-X) program. The facility uses neutron activation of non-special nuclear material (SNM) to produce the medical isotopes 131 I and 99 Mo at a throughput of 60 Ci/week of 131 I and 5 Ci/week of 99 Mo. The hypothetical design was carried out using a 10 MWt research reactor. The precursors used for the activation process were TeO2 for 131 I and MoO 3 for 99 Mo. The processes are performed in 3 hot cells used for target receipt, extraction, purification low specific activity (LSA) generator introduction, and packaging. A fourth hotcell is used for waste processing. The hot cell processing area takes up a footprint of 15.4 m 2 with the total footprint of the facility, including space for administrative offices, non-rad labs, quality assurance, and radiation buffer areas set at 763 m 2 . Waste is produced at a weekly rate of 257.8 g low activity solid waste and 8032.7 mL of low activity liquid waste, 8032 mL of which is water. This baseline hypothetical facility for production of medical isotopes via activation was then compared and contrasted to the hypothetical facility for production of medical isotopes via fission products to show the differences in approach for the two production modes. The two production modes had several highlighted differences including the overall facility and hot cell layout, the type and amount of waste produced by the respective facilities, and economic factors impacting production mode. Finally, a decision tree for which production mode might be more beneficial for an entrant into medical isotope production was developed based on the differences examined and the desired output of medical isotopes desired by the entrant.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Environmental and Economic Assessments and Uncertainties of Multiple Lignocellulosic Biomass Utilization for Bioenergy Products: Case Studies

Life-cycle assessment (LCA) and techno-economic analysis (TEA) were applied to assess the economic feasibility and environmental benefits of utilizing multiple biomass feedstocks for bioenergy products under three different technological pathways with consideration of uncertainties. Three cases were studied for the production of pellets, biomass-based electricity, and pyrolysis bio-oil. A Monte Carlo simulation was used to examine the uncertainties of fossil energy consumption, bioenergy conversion efficiency, stochastic production rate, etc. The cradle-to-gate LCA results showed that pellet production had the lowest greenhouse gas (GHG) emissions, water and fossil fuels consumption (8.29 kg CO2 eq (equivalent), 0.46 kg, and 105.42 MJ, respectively). The conversion process presented a greater environmental impact for all three bioenergy products. When producing 46,929 Mg of pellets, 223,380 MWh of electricity, and 78,000 barrels of pyrolysis oil, the net present values (NPV) indicated that only pellet and electricity production were profitable with NPVs of $1.20 million for pellets, and $5.59 million for biopower. Uncertainty analysis indicated that pellet production showed the highest uncertainty in GHG emission, and bio-oil production had the least uncertainty in GHG emission but had risks producing greater-than-normal amounts of GHG. Biopower production had the highest probability to be a profitable investment with 85.23%.

09 BIOMASS FUELS↗
DOE OSTI2022

Comparing Coarse-Resolution Land Surface Temperature Products over Western Australia

Satellite-derived land surface temperature (LST) has commonly been used to monitor global temperature changes. The MODIS MYD11A2 product is the most common coarse-resolution product used for this purpose. An updated MODIS product (MYD21A2) and new VIIRS (VNP21A2) product have also recently become available. This study analyses eight-day, quality-controlled, LST imagery over Western Australia (WA) for the three products for an urban and a non-urban area for the years 2013, 2016, and 2019. An analysis of the data indicates that (i) the averaged daytime LST difference between the three products for Perth city over the three years was 1.32 °C, while at night it was 0.89 °C; (ii) the averaged daytime difference over the Kimberley region was 7.02 °C with a night average difference of 2.39 °C; and (iii) both the MYD21A2 and VNP21A2 products still appear to record anomalous monthly LST values, particularly in the humid Kimberley monsoonal months. The overall objective of the National Aeronautics and Space Administration (NASA) is to ensure that the LST values of the two satellite system products are comparable, so evidence of LST value differences will require further investigation, especially if the older product is to be replaced by the newer systems.

47 OTHER INSTRUMENTATION↗
NASA NTRS1990

A proposal to demonstrate production of salad crops in the space station mockup facility with particular attention to space, energy, and labor constraints

A desire for fresh vegetables for consumption during long term space missions has been foreseen. To meet this need in a microgravity environment within the limited space and energy available on Space Station requires highly productive vegetable cultivars of short stature to optimize vegetable production per volume available. Special water and nutrient delivery systems must also be utilized. As a first step towards fresh vegetable production in the microgravity of Space Station, several soil-less capillary action media were evaluated for the ability to support growth of two root crops (radish and carrot) which are under consideration for inclusion in a semi-automated system for production of salad vegetables in a microgravity environment (Salad Machine). In addition, productivity of different cultivars of radish was evaluated as well as the effect of planting density and cultivar on carrot production and size. Red Prince radish was more productive than Cherry Belle and grew best on Jiffy Mix Plus. During greenhouse studies, vermiculite and rock wool supported radish growth to a lesser degree than Jiffy Mix Plus but more than Cellular Rooting Sponge. Comparison of three carrot cultivars (Planet, Short n Sweet, and Goldinhart) and three planting densities revealed that Short n Sweet planted at 25.6 sq cm/plant had the greatest root fresh weight per pot, the shortest mean top length, and intermediate values of root length and top fresh weight per pot. Red Prince radish and Short n Sweet carrot showed potential as productive cultivars for use in a Salad Machine. Results of experiments with solid capillary action media were disappointing. Further research must be done to identify a solid style capillary action media which can productively support growth of root crops such as carrot and radish.

Brooks, Carolyn A.↗
NASA NTRS1994

Ecosystem and physiological controls over methane production in northern wetlands

Peat chemistry appears to exert primary control over methane production rates in the Canadian Northern Wetlands Study (NOWES) area. We determined laboratory methane production rate potentials in anaerobic slurries of samples collected from a transect of sites through the NOWES study area. We related methane production rates to indicators of resistance to microbial decay (peat C: N and lignin: N ratios) and experimentally manipulated substrate availability for methanogenesis using ethanol (EtOH) and plant litter. We also determined responses of methane production to pH and temperature. Methane production potentials declined along the gradient of sites from high rates in the coastal fens to low rates in the interior bogs and were generally highest in surface layers. Strong relationships between CH4 production potentials and peat chemistry suggested that methanogenesis was limited by fermentation rates. Methane production at ambient pH responded strongly to substrate additions in the circumneutral fens with narrow lignin: N and C: N ratios (delta CH4/delta EtOH = 0.9-2.3 mg/g) and weakly in the acidic bogs with wide C: N and lignin: N ratios (delta CH4/delta EtOH = -0.04-0.02 mg/g). Observed Q(sub 10) values ranged from 1.7 to 4.7 and generally increased with increasing substrate availability, suggesting that fermentation rates were limiting. Titration experiments generally demonstrated inhibition of methanogenesis by low pH. Our results suggest that the low rates of methane emission observed in interior bogs during NOWES likely resulted from pH and substrate quality limitation of the fermentation step in methane production and thus reflect intrinsically low methane production potentials. Low methane emission rates observed during NOWES will likely be observed in other northern wetland regions with similar vegetation chemistry.

Valentine, David W.↗
NASA NTRS1996

Cosmogenic Production of Be-7 and Be-10 in Water Targets

We have measured Be-10(t(sub 1/2) = 1.5 x 10(exp 6) years) and Be-7 (t(sub 1/2) = 53.28 days) concentrations in water targets exposed for 1 to 2 years at Echo Lake, Colorado (elevation = 3246 m) and at La Jolla, California (140 m). Neutron monitor data were used to normalize the measured concentrations in order to calculate production rates equivalent to the cosmic ray flux averaged over four solar cycles (43 years). The Be-7 production rates thus obtained correspond to 6.03 +/- 0.07 x 10(exp -6) atom/g.O/s at Echo Lake and 5.06 +/- 0.20 x 10(exp -7) atom/g.O/ s at La Jolla. The Be-10 production rates correspond to 3.14 +/- 0.18 x 10(exp -6) atom/g.O/s at Echo Lake and 2.68 +/- 0.47 x 10(exp -7) atom/g.O/s at La Jolla. When compared with Be-10 production rates determined in Be-10-saturated rocks from the Antarctic and with theoretical calculations based on meteorite and lunar sample data, we find that the million-year average production rate is about 14 - 17% greater than the present production rate averaged over the last four solar cycles. Comparison with production rates determined by measuring glacially polished rocks from the Sierra Nevada in California indicates that average production (based on a revised 13,000-year deglaciation age and a geographic latitude correction) is a about 11% greater than the average over the last four solar cycles. The measured Be-10/Be-7 production ratio in oxygen is 0.52 +/- 0.03 at Echo Lake and 0.55 +/- 0.07 at La Jolla.

Nishiizumi, K.↗
NASA NTRS2000

IRIS Product Recommendations

This report presents the Applied Meteorology Unit's (AMU) evaluation of SIGMET Inc.'s Integrated Radar Information System (IRIS) Product Generator and recommendations for products emphasizing lightning and microburst tools. The IRIS Product Generator processes radar reflectivity data from the Weather Surveillance Radar, model 74C (WSR-74C), located on Patrick Air Force Base. The IRIS System was upgraded from version 6.12 to version 7.05 in late December 1999. A statistical analysis of atmospheric temperature variability over the Cape Canaveral Air Force Station (CCAFS) Weather Station provided guidance for the configuration of radar products that provide information on the mixed-phase (liquid and ice) region of clouds, between 0 C and -20 C. Mixed-phase processes at these temperatures are physically linked to electrification and the genesis of severe weather within convectively generated clouds. Day-to-day variations in the atmospheric temperature profile are of sufficient magnitude to warrant periodic reconfiguration of radar products intended for the interpretation of lightning and microburst potential of convectively generated clouds. The AMU also examined the radar volume-scan strategy to determine the scales of vertical gaps within the altitude range of the 0 C to -20 C isotherms over the Kennedy Space Center (KSC)/CCAFS area. This report present's two objective strategies for designing volume scans and proposes a modified scan strategy that reduces the average vertical gap by 37% as a means for improving radar observations of cloud characteristics in the critical 0 C to -20 C layer. The AMU recommends a total of 18 products, including 11 products that require use of the IRIS programming language and the IRIS User Product Insert feature. Included is a cell trends product and display, modeled after the WSR-88D cell trends display in use by the National Weather Service.

Short, David A.↗
NASA NTRS2000

Intercomparison of Global Precipitation Products: The Third Precipitation Intercomparison Project (PIP-3)

A set of global, monthly rainfall products has been intercompared to understand the quality and utility of the estimates. The products include 25 observational (satellite-based), four model and two climatological products. The results of the intercomparison indicate a very large range (factor of two or three) of values when all products are considered. The range of values is reduced considerably when the set of observational products is limited to those considered quasi-standard. The model products do significantly poorer in the tropics, but are competitive with satellite-based fields in mid-latitudes over land. Over ocean, products are compared to frequency of precipitation from ship observations. The evaluation of the observational products point to merged data products (including rain gauge information) as providing the overall best results.

Adler, Robert F.↗
NASA NTRS2000

Intercomparison of Global Precipitation Products: The Third Precipitation Intercomparison Project (PIP-3)

A set of global, monthly rainfall products has been intercompared to understand the quality and utility of the estimates. The products include 25 observational (satellite-based), four model and two climatological products. The results of the intercomparison indicate a very large range (factor of two or three) of values when all products are considered. The range of values is reduced considerably when the set of observational products is limited to those considered quasi-standard. The model products do significantly poorer in the tropics, but are competitive with satellite-based fields in mid-latitudes over land. Over ocean, products are compared to frequency of precipitation from ship observations. The evaluation of the observational products point to merged data products (including rain gauge information) as providing the overall best results.

Adler, Robert F.↗
NASA NTRS2000

Matching Crew Diet and Crop Food Production in BIO-Plex

This paper matches the BIO-Plex crop food production to the crew diet requirements. The expected average calorie requirement for BIO-Plex is 2,975 Calories per crewmember per day, for a randomly selected crew with a typical level of physical activity. The range of 2,550 to 3,400 Calories will cover about two-thirds of all crews. The exact calorie requirement will depend on the gender composition, individual weights, exercise, and work effort of the selected crew. The expected average crewmember calorie requirement can be met by 430 grams of carbohydrate, 100 grams of fat, and 90 grams of protein per crewmember per day, for a total of 620 grams. Some fat can replaced by carbohydrate. Each crewmember requires only 2 grams of vitamins and minerals per day. Only unusually restricted diets may lack essential nutrients. The Advanced Life Support (ALS) consensus is that BIO-Plex should grow wheat, potato, and soybean, and maybe sweet potato or peanut, and maybe lettuce and tomato. The BIO-Plex Biomass Production System food production and the external food supply must be matched to the crew diet requirement for calories and nutritional balance. The crop production and external supply specifications can each be varied as long as their sum matches the required diet specification. We have wide flexibility in choosing the crops and resupply. We can easily grow one-half the crew calories in one BIO-Plex Biomass Production Chamber (BPC) if we grow only the most productive crops (wheat, potato, and sweet potato) and it we achieve nominal crop productivity. If we assume higher productivity we can grow a wider variety of crops. If we grow one-half of the crew calories, externally supplied foods can easily provide the other half of the calories and balance the diet. We can not grow 95 percent of the crew calories in two BPCs at nominal productivity while growing a balanced diet. We produce maximum calories by growing wheat, potato, and peanut.

Jones, Harry↗
NASA NTRS2002

Correlation of the Coronal Mass Ejection Productivity of Solar Active Regions with Measures of their Global Nonpotentiality from Vector Magnetograms: Baseline Results

Conventional magnetograms and chromospheric and coronal images show qualitatively that the fastest coronal mass ejections (CMEs) are magnetic explosions from sunspot active regions where the magnetic field is globally strongly sheared and twisted from its minimum-energy potential configuration. We present measurements from active region vector magnetograms that start to quantify the dependence of an active region's CME productivity on the global nonpotentiality of its magnetic field. From each of 17 magnetograms of 12 bipolar active regions, we measured the size of the active region (the magnetic flux content, phi) and three separate measures of the global nonpotentiality (L(sub SS), the length of strong-shear, strong-field main neutral line: I(sub N), the net electric current connecting one polarity to the other; and alpha = (mu)I(sub N)/phi), a flux normalized measure of the field twist). From these measurements and the observed CME productivity of the active regions, we find that: (1) All three measures of global nonpotentiality are statistically correlated with the active region flux content and with each other; (2) All three measures of global nonpotentiality are significantly correlated with CME productivity. The flux content correlates with CME productivity, but at a lower statistically significant confidence level (less than 95%); (3) The net current is less closely correlated with CME productivity than alpha and the correlation of CME productivity with flux content is even weaker. If these differences in correlation strength, and a significant correlation of alpha with flux content, persist to larger active regions, this would imply that the size of active regions does not affect CME productivity except through global nonpotentiality; and (4) For each of the four global magnetic quantities, the correlation with CME productivity is stronger for a two-day time window for the CME production than for windows half as wide or twice as wide. This plausibly is a result of the most counterproductive active regions producing less than one CME per day, and from the active region's evolution often significantly changing the global nonpotentiality over the course of several days. These results establish that measures of active region global nonpotentiality from vector magnetograms (such as L(sub SS), I(sub N), and alpha) should be useful for prediction a active region CMEs.

Falconer, D. A.↗
NASA NTRS2003

TRMM Fire Algorithm, Product and Applications

Land fires are frequent menaces to human lives and property. They also change the state of the vegetation and contribute to the climate forcing by releasing large amount of aerosols and greenhouse gases into the atmosphere. This paper summarizes methodologies of detecting global land fires from the Tropical Rainfall Measuring Mission (TRMM) Visible Infrared Scanner FIRS) measurements. The TRMM Science Data and Information System (TSDIS) fire products include global images of daily hot spots and monthly fire counts at 0.5 deg. x 0.5 deg. resolution, as well as text fiies that details necessary information of all fire pixels. The information includes date, orbit number, pixel number, local time, solar zenith angle, latitude, longitude, reflectance of visible/near infrared channels, brightness temperatures of infrared channels, as well as background brightness temperatures of infrared channels. These products have been archived since January 1998. The TSDIS fire products are compared with the coincidental European Commission (EC) Joint Research Center (JRC) 1 km AVHRR fire products. Analyses of the TSDIS monthly fire products during the period from 1998 to 2003 manifested seasonal cycles of biomass fires over Southeast Asia, Africa, North America and South America. The data also showed interannual variations associated with the 98/99 ENS0 cycle in Central America and the Indonesian region. In order to understand the variability of global land fires and their effects on the distribution of atmospheric aerosols, statistical methods were applied to the TSDIS fire products as well as to the Total Ozone Mapping Spectrometer (TOMS) aerosol index products for a period of five years from January 1998 to December 2002. The variability of global atmospheric aerosol is consistent with the fire variations over these regions during this period. The correlation between fire count and TOMS aerosol index is about 0.55 for fire pixels in Southeast Asia, Indonesia, and Africa. Parallel statistical analyses such as Empirical Orthogonal Function (EOF) analysis and Singular Spectrum Analysis (SSA) methods were applied to pentad TRMM fire data and TOMS aerosol data. The EOF analyses showed contrast between North and South hemispheres and also inter- continental transitions in Africa and America. EOF and SSA analyses also identified 25-60 day intra-seasonal oscillations that were superimposed on the annual cycles of both fire and aerosol data. The intra-seasonal variability of fires showed similarity of tropical rainfall oscillation modes. The TRMM fire products were also compared to the coincident TRMh4 rainfall and other rainfall products to investigate the interaction between rainfall and fire. The results indicate that the annual, interannual and intraseasonal variability of fire are dominated by global rainfall variations. However, the feedback of fire to the rainfall occurrence at regional scale for certain regions is also evident.

Ji, Yi-Min↗
NASA NTRS1985

Microbial biomass and productivity in seagrass beds

Different methods for measuring the rates of processes mediated by bacteria in sediments and the rates of bacterial cell production have been compared. In addition, net production of the seagrass Zostera capricorni and bacterial production have been compared and some interrelationships with the nitrogen cycle discussed. Seagrass productivity was estimated by measuring the plastochrone interval using a leaf stapling technique. The average productivity over four seasons was 1.28 +/- 0.28 g C m-2 day-1 (mean +/- standard deviation, n = 4). Bacterial productivity was measured five times throughout a year using the rate of tritiated thymidine incorporated into DNA. Average values were 33 +/- 12 mg C m-2 day-1 for sediment and 23 +/- 4 for water column (n = 5). Spatial variability between samples was greater than seasonal variation for both seagrass productivity and bacterial productivity. On one occasion, bacterial productivity was measured using the rate of 32P incorporated into phospholipid. The values were comparable to those obtained with tritiated thymidine. The rate of sulfate reduction was 10 mmol SO4(-2) m-2 day-1. The rate of methanogenesis was low, being 5.6 mg CH4 produced m-2 day-1. A comparison of C flux measured using rates of sulfate reduction and DNA synthesis indicated that anaerobic processes were predominant in these sediments. An analysis of microbial biomass and community structure, using techniques of phospholipid analysis, showed that bacteria were predominant members of the microbial biomass and that of these, strictly anaerobic bacteria were the main components. Ammonia concentration in interstitial water varied from 23 to 71 micromoles. Estimates of the amount of ammonia required by seagrass showed that the ammonia would turn over about once per day. Rapid recycling of nitrogen by bacteria and bacterial grazers is probably important.

NASA Program CELSS↗
NASA NTRS2004

Global Patterns in Human Consumption of Net Primary Production

The human population and its consumption profoundly affect the Earth's ecosystems. A particularly compelling measure of humanity's cumulative impact is the fraction of the planet's net primary production that we appropriate for our Net primary production-the net amount of solar energy converted to plant organic matter through photosynthesis-can be measured in units of elemental carbon and represents the primary food energy source for the world's ecosystems. Human appropriation of net primary production, apart from leaving less for other species to use, alters the composition of the atmosphere, levels of biodiversity, flows within food webs and the provision of important primary production required by humans and compare it to the total amount generated on the landscape. We then derive a spatial ba!mce sheet of net primary production supply and demand for the world. We show that human appropriation of net primary production varies spatially from almost zero to many times the local primary production. These analyses reveal the uneven footprint of human consumption and related environmental impacts, indicate the degree to which human populations depend on net primary production "imports" and suggest policy options for slowing future growth of human appropriation of net primary production.

Imhoff, Marc L.↗
NASA NTRS1998

Nitric oxide production by cultured human aortic smooth muscle cells: stimulation by fluid flow

This study demonstrated that exposure of cultured human aortic smooth muscle cells (SMC) to fluid flow resulted in nitric oxide (NO) production, monitored by nitrite and guanosine 3',5'-cyclic monophosphate production. A rapid burst in nitrite production rate was followed by a more gradual increase throughout the period of flow exposure. Neither the initial burst nor the prolonged nitrite production was dependent on the level of shear stress in the range of 1.1-25 dyn/cm2. Repeated exposure to shear stress after a 30-min static period restimulated nitrite production similar to the initial burst. Ca(2+)-calmodulin antagonists blocked the initial burst in nitrite release. An inhibitor of nitric oxide synthase (NOS) blocked nitrite production, indicating that changes in nitrite reflect NO production. Treatment with dexamethasone or cycloheximide had no effect on nitrite production. Monoclonal antibodies directed against the inducible and endothelial NOS isoforms showed no immunoreactivity on Western blots, whereas monoclonal antibodies directed against the neuronal NOS gave specific products. These findings suggest that human aortic SMC express a constitutive neuronal NOS isoform, the enzymatic activity of which is modulated by flow.

Non-NASA Center↗