Search NASA⌕ Search

SEARCH · Search NASA

Results for “Parameters optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Development of GaAs solar cells

Calculations of GaAs solar cell output parameters were refined and a computer model was developed for parameter optimization. The results were analyzed to determine the material characteristics required for a high efficiency solar cell. Calculated efficiencies for a P/N cell polarity are higher than an N/P cell. Both cell polarities show efficiency to have a larger dependence on short circuit current than an open circuit voltage under nearly all conditions considered. The tolerances and requirements of a cell fabrication process are more critical for an N/P type than for a P/N type cell. Several solar cell fabrication considerations relative to junction formation using ion implantation are also discussed.

Mcnally, P. J.↗
NASA NTRS1972

Near-earth orbital guidance and remote sensing

The curriculum of a short course in remote sensing and parameter optimization is presented. The subjects discussed are: (1) basics of remote sensing and the user community, (2) multivariant spectral analysis, (3) advanced mathematics and physics of remote sensing, (4) the atmospheric environment, (5) imaging sensing, and (6)nonimaging sensing. Mathematical models of optimization techniques are developed.

Powers, W. F.↗
NASA NTRS1973

Numerical integration routines for near-earth operations

Two general purpose numerical integration schemes were built into the NASA-JSC computer system. The state-of-the-art of numerical integration, the particular integrators built into the JSC computer system, and the use of the new integration packages are described. Background information about numerical integration and the variable-order, variable-stepsize Adams numerical integration technique is discussed. Results concerning the PEACE parameter optimization program are given along with recommendations and conclusions.

Powers, W. F.↗
NASA NTRS1973

Automatic equalization using the discrete frequency domain.

A new mean-square-error automatic equalizer for synchronous data transmission is developed. It utilizes Rosen's gradient-projection method to optimize parameters in the discrete frequency domain. The algorithm converges (in the mean) for any channel even in the presence of noise. It is shown that for the channels considered, convergence is faster (in a bounded sense) than for comparable time-domain equalizers.

Walzman, T.↗
NASA NTRS1973

Accelerating one-dimensional searches.

In the search technique presented, the number of function evaluations is reduced by making use of the derivative of the function. The search method is combined with the variable metric algorithm reported by Davidon (1959) to solve a 17-parameter optimal atmospheric flight of a space shuttle vehicle. In the case of the problem, the proposed method requires one or two function evaluations per iteration less than the standard cubic fit-golden section method.

Johnson, I. L., Jr.↗
NASA NTRS1974

Integrated source and channel encoded digital communications system design study

Studies on the digital communication system for the direct communication links from ground to space shuttle and the links involving the Tracking and Data Relay Satellite (TDRS). Three main tasks were performed:(1) Channel encoding/decoding parameter optimization for forward and reverse TDRS links,(2)integration of command encoding/decoding and channel encoding/decoding; and (3) modulation coding interface study. The general communication environment is presented to provide the necessary background for the tasks and to provide an understanding of the implications of the results of the studies.

Huth, G. K.↗
NASA NTRS1973

Flight control systems research

Theoretical development is reported for the parameter optimization design technique needed for digital flight control system design. The results of an example case study applying the optimization technique for continuous systems to an F-8 aircraft feedback control system are presented. The concept of evolving the simplest system configuration that is capable of meeting a specified set of performance requirements is illustrated in this work.

Whitaker, H. P.↗
NASA NTRS1974

The cost of noise reduction in commercial tilt rotor aircraft

The relationship between direct operating cost (DOC) and departure noise annoyance was developed for commercial tilt rotor aircraft. This was accomplished by generating a series of tilt rotor aircraft designs to meet various noise goals at minimum DOC. These vehicles were spaced across the spectrum of possible noise levels from completely unconstrained to the quietest vehicle that could be designed within the study ground rules. A group of optimization parameters were varied to find the minimum DOC while other inputs were held constant and some external constraints were met. This basic variation was then extended to different aircraft sizes and technology time frames. It was concluded that reducing noise annoyance by designing for lower rotor tip speeds is a very promising avenue for future research and development. It appears that the cost of halving the annoyance compared to an unconstrained design is insignificant and the cost of halving the annoyance again is small.

Faulkner, H. B.↗
NASA NTRS1975

15 cm cusped magnetic field mercury ion thruster research

The importance of achieving a uniform current density in the exhaust beam of an electrostatic ion thruster is discussed in terms of thrust level and accelerator grid lifetime. A neutral residence time approach is used to propose a magnetic field geometry which should produce a highly uniform beam current density. The discharge chamber length to diameter ratio is shown to be an important optimization parameter and experimental evaluation of the cusped field thruster over a wide range of this parameter is presented. Beam profile measurements 5 cm downstream of the accelerator grid indicate a beam profile flatness parameter which is 25% greater than the SERT II value. Flatness parameters extrapolated to the plane of the accelerator grid are demonstrated to be as high as 0.9.

Beattie, J. R.↗
NASA NTRS1977

Control system design

Computer program optimizes parameters in feedback controller transfer function.

Seidel, R. C.↗
NASA NTRS1975

Limited variance control in statistical low thrust guidance analysis

Difficulties arise in guiding a solar electric propulsion spacecraft due to nongravitational accelerations caused by random fluctuations in the magnitude and direction of the thrust vector. These difficulties may be handled by using a low thrust guidance law based on the linear-quadratic-Gaussian problem of stochastic control theory with a minimum terminal miss performance criterion. Explicit constraints are imposed on the variances of the control parameters, and an algorithm based on the Hilbert space extension of a parameter optimization method is presented for calculation of gains in the guidance law. The terminal navigation of a 1980 flyby mission to the comet Encke is used as an example.

Jacobson, R. A.↗
NASA NTRS1976

Shuttle/TDRSS Ku-band downlink study

Assessing the adequacy of the baseline signal design approach, developing performance specifications for the return link hardware, and performing detailed design and parameter optimization tasks was accomplished by completing five specific study tasks. The results of these tasks show that the basic signal structure design is sound and that the goals can be met. Constraints placed on return link hardware by this structure allow reasonable specifications to be written so that no extreme technical risk areas in equipment design are foreseen. A third channel can be added to the PM mode without seriously degrading the other services. The feasibility of using only a PM mode was shown to exist, however, this will require use of some digital TV transmission techniques. Each task and its results are summarized.

Meyer, R.↗
NASA NTRS1980

Perturbation-magnitude control for difference-quotient estimation of derivatives

A process for adjusting perturbation magnitude for accurate difference-quotient estimation of derivatives is described. The process is intended to be carried out sequentially, alternating with iterations of a parameter-optimization algorithm. A more complex and computationally-expensive scheme for occasional auxiliary use is also described.

Kelley, H. J.↗
NASA NTRS1980

Impact of longitudinal flying qualities upon the design of a transport with active controls

Direct constrained parameter optimization was used to optimally size a medium range transport for minimum direct operating cost. Several stability and control constraints were varied to study the sensitivity of the configuration to specifying the unaugmented flying qualities of transports designed with relaxed static stability. Additionally, a number of handling quality related design constants were studied with respect to their impact to the design.

Sliwa, S. M.↗
NASA NTRS1980

Economic evaluation of flying-qualities design criteria for a transport configured with relaxed static stability

Direct constrained parameter optimization was used to optimally size a medium range transport for minimum direct operating cost. Several stability and control constraints were varied to study the sensitivity of the configuration to specifying the unaugmented flying qualities of transports designed to take maximum advantage of relaxed static stability augmentation systems. Additionally, a number of handling qualities related design constants were studied with respect to their impact on the design.

Sliwa, S. M.↗
NASA NTRS1981

Computational problems in autoregressive moving average (ARMA) models

The choice of the sampling interval and the selection of the order of the model in time series analysis are considered. Band limited (up to 15 Hz) random torque perturbations are applied to the human ankle joint. The applied torque input, the angular rotation output, and the electromyographic activity using surface electrodes from the extensor and flexor muscles of the ankle joint are recorded. Autoregressive moving average models are developed. A parameter constraining technique is applied to develop more reliable models. The asymptotic behavior of the system must be taken into account during parameter optimization to develop predictive models.

Agarwal, G. C.↗
NASA NTRS1976

The cost of noise reduction for departure and arrival operations of commercial tilt rotor aircraft

The relationship between direct operating cost (DOC) and noise annoyance due to a departure and an arrival operation was developed for commercial tilt rotor aircraft. This was accomplished by generating a series of tilt rotor aircraft designs to meet various noise goals at minimum DOC. These vehicles ranged across the spectrum of possible noise levels from completely unconstrained to the quietest vehicles that could be designed within the study ground rules. Optimization parameters were varied to find the minimum DOC. This basic variation was then extended to different aircraft sizes and technology time frames.

Faulkner, H. B.↗
NASA NTRS1981

SLAM examination of solar cells and solar cell welds

The scanning laser acoustic microscope (SLAM) has been evaluated for non-destructive examination of solar cells and interconnector bonds. Using this technique, it is possible to view through materials in order to reveal regions of discontinuity such as microcracks and voids. Of particular interest is the ability to evaluate, in a unique manner, the bonds produced by parallel gap welding. It is possible to not only determine the area and geometry of the bond between the tab and cell, but also to reveal any microcracks incurred during the welding. By correlating the SLAM results with conventional techniques of weld evaluation a more confident weld parameter optimization can be obtained.

Stella, P. M.↗