Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power Coupling Factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

High-frequency high-voltage high-power DC-to-DC converters

The current and voltage waveshapes associated with the power transitor and the power diode in an example current-or-voltage step-up (buck-boost) converter were analyzed to highlight the problems and possible tradeoffs involved in the design of high voltage high power converters operating at switching frequencies in the range of 100 Khz. Although the fast switching speeds of currently available power diodes and transistors permit converter operation at high switching frequencies, the resulting time rates of changes of current coupled with parasitic inductances in series with the semiconductor switches, produce large repetitive voltage transients across the semiconductor switches, potentially far in excess of the device voltage ratings. The need is established for semiconductor switch protection circuitry to control the peak voltages appearing across the semiconductor switches, as well as to provide the waveshaping action require for a given semiconductor device. The possible tradeoffs, as well as the factors affecting the tradeoffs that must be considered in order to maximize the efficiency of the converters are enumerated.

Wilson, T. G.↗

Si-Ge Nano-Structured with Tungsten Silicide Inclusions

Traditional silicon germanium high temperature thermoelectrics have potential for improvements in figure of merit via nano-structuring with a silicide phase. A second phase of nano-sized silicides can theoretically reduce the lattice component of thermal conductivity without significantly reducing the electrical conductivity. However, experimentally achieving such improvements in line with the theory is complicated by factors such as control of silicide size during sintering, dopant segregation, matrix homogeneity, and sintering kinetics. Samples are prepared using powder metallurgy techniques; including mechanochemical alloying via ball milling and spark plasma sintering for densification. In addition to microstructural development, thermal stability of thermoelectric transport properties are reported, as well as couple and device level characterization.

thermoelectricity↗

Origin of the Q{sup 2}-dependence of the DIS structure functions

We consider in detail Q{sup 2}-dependence of the DIS structure functions. Very often this dependence is claimed to be originated by the Q{sup 2}-dependence of the QCD coupling. This leads to the small-x asymptotics of the structure functions with Q{sup 2}-dependent intercepts. We demonstrate that the DGLAP parametrization α{sub s} = α{sub s}(Q{sup 2}) is an approximation valid in the region of large x (where 2pq can be approximated by Q{sup 2}) only, providing the factorization scale is also large. Outside this region, the DGLAP parametrization fails, so α{sub s} should be replaced by an effective coupling which is independent of Q{sup 2} at small x. As a consequence, intercepts of the structure functions are independent of Q{sup 2}. Nevertheless, the small-x asymptotics of the structure functions explicitly depend on Q{sup 2}, even when the coupling does not depend on it. We also consider the structure functions at small Q{sup 2} and give a comment on power-Q{sup 2} corrections to the structure functions at large and small Q{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The nature of the compact X-ray source in the supernova remnant G27.4+0.0

High-resolution X-ray imaging data obtained with ROSAT is used to constrain the nature of the central compact source in the supernova remnant G27.4+0.0. Diffuse emission is seen from throughout the approximately 4 min diameter radio shell, while the central source remains unresolved at approximately 3 sec. We combine archival data from the Einstein HRI, IPC, and MPC with the ROSAT HRI data to define the X-ray spectra of the diffuse and point-like emission. The bulk of the shell radiation is consistent with that of a approximately 10(exp 7) K plasma, although a higher temperature component is also suggested by the data; coupled with the remnant's size and distance, we derive an age of between 500 and 2500 yr. The point source has a substantially harder spectrum, with a power-law photon index less than or approximately equal to 1. A search for periodic modulation from the point source yields upper limits ranging from 10%-35% for periods between 0.025 and 1000 s, depending on the assumed pulse shape. No aperiodic variability on timescales of from 10(exp 3) to 10(exp 8) s is required, although a factor of approximately 2 change between the Einstein and ROSAT eras is possible. We show that the point source cannot represent thermal emission from the surface of a young neutron star and is unlikely to be explained as nonthermal, Crab-like X-ray pulses or a small synchrotron nebula. The most likely models involve accretion-powered systems -- either a wind-fed neutron star with a massive companion or a low-mass X-ray binary. In all probability, this is the youngest X-ray binary in the Galaxy.

Helfand, David J.↗

Acceleration of Solvation Free Energy Calculation via Thermodynamic Integration Coupled with Gaussian Process Regression and Improved Gelman–Rubin Convergence Diagnostics

The determination of the solvation free energy of ions and molecules holds profound importance across a spectrum of applications spanning chemistry, biology, energy storage, and the environment. Molecular dynamics simulations are powerful tools for computing this critical parameter. Nevertheless, the accurate and efficient calculation of the solvation free energy becomes a formidable endeavor when dealing with complex systems characterized by potent Coulombic interactions and sluggish ion dynamics and, consequently, slow transition across various metastable states. Here, in the present study, we expose limitations stemming from the conventional calculation of the statistical inefficiency g in the thermodynamic integration method, a factor that can hinder the determination of convergence of the solvation free energy and its associated uncertainty. Instead, we propose a robust scheme based on Gelman–Rubin convergence diagnostics. We leverage this improved estimation of uncertainties to introduce an innovative accelerated thermodynamic integration method based on the Gaussian Process regression. This methodology is applied to the calculation of the solvation free energy of trivalent rare-earth elements immersed in ionic liquids, a scenario in which the aforementioned challenges render standard approaches ineffective. The proposed method proves to be effective in computing solvation free energy in situations where traditional thermodynamic integration methods fall short.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Renewable Thermal Hybridization Framework for Industrial Process Heat Applications

Solar industrial process heat (SIPH) technologies, such as concentrating solar power collectors, could economically replace the steam or heat needs at many industrial sites by providing high-temperature heat transfer fluids (HTFs) such as pressurized water, synthetic-oil, or direct steam. Renewable thermal energy systems (RTES) could be hybridized with different renewable options e.g., flat plate collectors with parabolic trough collectors, or combined with existing heat supplies (e.g., fossil fuels), to give options for targeted SIPH applications, industrial decarbonization and the reduction of fuel consumption. Hybrid solutions and thermal energy storage will be important for the dispatch of heat at optimal times needed by the demand side of the buildings and industrial applications. At present, there is no integrated modeling tool for hybrid RTES, and this paper highlights the development of a renewable thermal hybridization framework for IPH use that is built from existing tools like System Advisor Model. The long-term vision for the framework (through significant further research) is to develop a coupled hybrid energy generation and cost analysis tool, where the tool could help the user in determining the most suitable and cost-effective technologies for their applications. Ongoing work will look to add costs for RTES options and further refinement on the selection of suitable technologies. This future tool could calculate the levelized cost of heat of various RTES hybrid options, by taking the user's solar resource, fuel costs, industrial heat demand profile, available land, and other factors into account to determine the applicability into their process.

concentrating solar power↗

Rephasing invariants of the Cabibbo-Kobayashi- Maskawa matrix

The paper is motivated by the importance of the rephasing invariance of the CKM (Cabibbo-Kobayashi-Maskawa) matrix observables. These observables appear in the discussion of the CP violation in the standard model (Jarlskog invariant) and also in the renormalization group equations for the quark Yukawa couplings. Our discussion is based on the general phase invariant monomials built out of the CKM matrix elements and their conjugates. We show that there exist 30 fundamental phase invariant monomials and 18 of them are a product of 4 CKM matrix elements and 12 are a product of 6 CKM matrix elements. In the main theorem we show that a general rephasing invariant monomial can be expressed as a product of at most five factors: four of them are fundamental phase invariant monomials and the fifth factor consists of powers of squares of absolute values of the CKM matrix elements. We also show that the imaginary part of any rephasing invariant monomial is proportional to the Jarlskog’s invariant J or is 0.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Power scaling analysis of fiber lasers and amplifiers based on non-silica materials

A developed formalism for analyzing the power scaling of diffraction limited fiber lasers and amplifiers is applied to a wider range of materials. Limits considered include thermal rupture, thermal lensing, melting of the core, stimulated Raman scattering, stimulated Brillouin scattering, optical damage, bend induced limits on core diameter and limits to coupling of pump diode light into the fiber. For conventional fiber lasers based upon silica, the single aperture, diffraction limited power limit was found to be 36.6kW. This is a hard upper limit that results from an interaction of the stimulated Raman scattering with thermal lensing. This result is dependent only upon physical constants of the material and is independent of the core diameter or fiber length. Other materials will have different results both in terms of ultimate power out and which of the many limits is the determining factor in the results. Materials considered include silica doped with Tm and Er, YAG and YAG based ceramics and Yb doped phosphate glass. Pros and cons of the various materials and their current state of development will be assessed. In particular the impact of excess background loss on laser efficiency is discussed.

42 ENGINEERING↗

Feasibility of producing a short, high energy s-band linear accelerator using a klystron power source

Purpose: To use a finite-element method (FEM) model to study the feasibility of producing a short s-band (2.9985 GHz) waveguide capable of producing x-rays energies up to 10 MV, for applications in a linac-MR, as well as conventional radiotherapy. Methods: An existing waveguide FEM model developed by the authors' group is used to simulate replacing the magnetron power source with a klystron. Peak fields within the waveguide are compared with a published experimental threshold for electric breakdown. The RF fields in the first accelerating cavity are scaled, approximating the effect of modifications to the first coupling cavity. Electron trajectories are calculated within the RF fields, and the energy spectrum, beam current, and focal spot of the electron beam are analyzed. One electron spectrum is selected for Monte Carlo simulations and the resulting PDD compared to measurement. Results: When the first cavity fields are scaled by a factor of 0.475, the peak magnitude of the electric fields within the waveguide are calculated to be 223.1 MV/m, 29% lower than the published threshold for breakdown at this operating frequency. Maximum electron energy increased from 6.2 to 10.4 MeV, and beam current increased from 134 to 170 mA. The focal spot FWHM is decreased slightly from 0.07 to 0.05 mm, and the width of the energy spectrum increased slightly from 0.44 to 0.70 MeV. Monte Carlo results show d{sub max} is at 2.15 cm for a 10 Multiplication-Sign 10 cm{sup 2} field, compared with 2.3 cm for a Varian 10 MV linac, while the penumbral widths are 4.8 and 5.6 mm, respectively. Conclusions: The authors' simulation results show that a short, high-energy, s-band accelerator is feasible and electric breakdown is not expected to interfere with operation at these field strengths. With minor modifications to the first coupling cavity, all electron beam parameters are improved.

60 APPLIED LIFE SCIENCES↗

Earth Abundant High Temperature Materials for Radioisotope Power Conversion System

Advances in high temperature thermoelectric materials were made and published. Two major developments are out lined in this final report. Alkaline earth Zintl phases represent the starting point of a series of compounds selected for development due to their high abundance as the supply chain and as the availability of certain rare earths (i.e. Yb) are limited and can be difficult to obtain. A new Zintl phase, Ca 14 MnSb 11-x Sn x , where Sb is replaced by Sn resulting in changes to the band structure and properties. The structures are investigated by powder diffraction and samples consolidated into fully dense pellets for thermoelectric measurements. The band structure of a reasonable structure, Ca 14 MgSb 7 Sn 4 , is calculated in order to better understand the properties. These Sn containing phases show improved thermoelectric properties over Ca 14 MgSb 11 by increasing the Seebeck while decreasing resistivity without significant impact to the already low thermal conductivity. In addition, a composite phase of Yb 14 MgSb 11 was investigated. Composite phases have been shown to improve both the thermoelectric efficiency and mechanical properties of materials. Here we demonstrate an improved thermoelectric figure of merit, power factor, and mechanical properties for the high-temperature p-type Zintl phase Yb 14 MgSb 11 . Composites with 0, 1, 2, 3, 4, 6, 8 volume % 6 – 10 µm reduced Fe powder were prepared via a fast, scalable mechanical milling and spark plasma sintering procedure. Powder X-ray diffraction, scanning electron microscopy, and transmission electron microscopy show that Fe is not incorporated into the Yb 14 MgSb 11 structure. First order reversal curves and scanning electron microscopy images show that the Fe inclusions are larger and closer together with increasing Fe content. Thermogravimetric and differential scanning calorimetry show that the composites are stable up to 1273 K. The elastic constants of the 8 volume % Fe composite were measured by resonant ultrasound spectroscopy and show that Yb 14 MgSb 11 becomes stiffer with increasing Fe volume % and SEM after indentations show crack arresting occurs at the Fe interface. Thermoelectric properties on dense pellets are measured from 300 K – 1273 K. The thermoelectric power factor (PF= $\frac{S^2}{ρ}$) increases with increasing Fe content, with the 8 volume % Fe resulting in 40% higher PF than pristine Yb 14 MgSb 11 . The increase in PF is attributed to a systematic reduction in electrical resistivity. Peak thermoelectric figure of merit (zT= ($\frac{S^2T}{κρ}$) is observed at 3 volume % Fe, an 11% improvement in zT compared to Yb 14 MgSb 11 . Yb 14 MgSb 11 composites with Fe are compatible with Ce 0.9 Fe 3.5 Co 0.5 Sb 12 for thermoelectric generator couple segmentation.

30 DIRECT ENERGY CONVERSION↗

Scalable energy-efficient magnetoelectric spin–orbit logic

Since the early 1980s, most electronics have relied on the use of complementary metal–oxide–semiconductor (CMOS) transistors. However, the principles of CMOS operation, involving a switchable semiconductor conductance controlled by an insulating gate, have remained largely unchanged, even as transistors are miniaturized to sizes of 10 nanometres. We investigated what dimensionally scalable logic technology beyond CMOS could provide improvements in efficiency and performance for von Neumann architectures and enable growth in emerging computing such as artifical intelligence. Such a computing technology needs to allow progressive miniaturization, reduce switching energy, improve device interconnection and provide a complete logic and memory family. Here we propose a scalable spintronic logic device that operates via spin–orbit transduction (the coupling of an electron’s angular momentum with its linear momentum) combined with magnetoelectric switching. The device uses advanced quantum materials, especially correlated oxides and topological states of matter, for collective switching and detection. We describe progress in magnetoelectric switching and spin–orbit detection of state, and show that in comparison with CMOS technology our device has superior switching energy (by a factor of 10 to 30), lower switching voltage (by a factor of 5) and enhanced logic density (by a factor of 5). Additionally, its non-volatility enables ultralow standby power, which is critical to modern computing. The properties of our device indicate that the proposed technology could enable the development of multi-generational computing.

42 ENGINEERING↗

Simulating MADMAX in 3D: Requirements for Dielectric Axion Haloscopes

We present 3D calculations for dielectric haloscopes such as the currently envisioned MADMAX experiment. For ideal systems with perfectly flat, parallel and isotropic dielectric disks of finite diameter, we find that a geometrical form factor reduces the emitted power by up to 30% compared to earlier 1D calculations. We derive the emitted beam shape, which is important for antenna design. We show that realistic dark matter axion velocities of 10 -3 c and inhomogeneities of the external magnetic field at the scale of 10% have negligible impact on the sensitivity of MADMAX. We investigate design requirements for which the emitted power changes by less than 20% for a benchmark boost factor with a bandwidth of 50 MHz at 22 GHz, corresponding to an axion mass of 90 μeV. We find that the maximum allowed disk tilt is 100 μm divided by the disk diameter, the required disk planarity is 20 μm (min-to-max) or better, and the maximum allowed surface roughness is 100 μm (min-to-max). We show how using tiled dielectric disks glued together from multiple smaller patches can affect the beam shape and antenna coupling.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Superconducting Films for Absorber-coupled MKID Detectors for Sub-millimeter and Far-infrared Astronomy

We describe measurements of the properties, at dc, gigahertz, and terahertz frequencies, of thin superconducting films with relatively high normal state sheet resistance. Such films can be applied to construct microwave kinetic inductance detector sensor arrays for submillimeter and far-infrared astronomical applications in which the incident power excites quasiparticles directly in a superconducting resonator that is configured to present a matched-impedance to the high frequency radiation being detected. For several materials, and a range of thicknesses down to 10 nm, we present measurements of normal state sheet resistance, resistance-temperature curves for the superconducting transition, quality factor and kinetic inductance fraction for microwave resonators made from patterned films, and terahertz measurements of the sheet impedance measured with a Fourier Transform Spectrometer.

Stevenson, T. R.↗

Dispersive and nondispersive 𝐾-matrix formalisms

The modeling of coupled-channel effects has become increasingly important due to the availability of highly precise data for a large variety of hadronic (re)scattering processes. The 𝐾-matrix is a powerful, yet comparatively simple, method to describe scattering amplitudes, including coupled-channel effects, with the aim of interpreting experimental data. Throughout the literature, a range of dispersive and nondispersive 𝐾-matrix methods are employed. Here, we compare the dispersive and nondispersive formulations in the context of the N/D method. It is shown that the methods are equivalent in the physical region under 𝐾-matrix reparametrization. Differences away from the physical region are examined. Applications to synthetic data are used to illustrate the effects of model choices concerning form factors and the application of dispersion relations, with the goal of clarifying best practices. We find no clear preference with regard to dispersive modeling. In contrast, we find that interpretational ambiguity of the bare model parameters—and even of the form of the bare model—is endemic, and recommend a thorough sampling of data and model spaces to assess conclusion robustness.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

LANSCE CCL Performance Limits

This report summarizes the performance limits of the LANSCE Coupled-Cavity Linac (CCL). These results are captured or summarized directly from the references cited. This report was written in support of the LANSCE Modernization Project (LAMP). Many factors contribute to the performance limits of the CCL accelerator system. One performance limit is set by the CCL mechanical structure and available cooling. Heating of the structure is ultimately linked to the operating RF duty factor of the CCL. Another performance limit is set by the maximum RF and beam duty factors that can be supported by the 805-MHz klystrons and associated HVDC power supplies. The RF and HVDC systems also set limits for the maximum peak beam current that can be accelerated in the CCL. And finally, a maximum beam current limit is set by the beam dynamics determined by the details of the CCL physics design (number of cells per CCL tank, accelerating gradients, magnetic focusing lattice, beam losses, etc.). This limit can be informed by both simulation results and beam measurement data, if available. A detailed explanation of each performance limit is given in the sections below. The results are summarized in the table below. In all cases, it is assumed that the CCL and the RF system are operating in their nominal beam production configuration – nominal magnet set points and nominal cavity fields, unless otherwise specified.

43 PARTICLE ACCELERATORS↗

Acousto-ultrasonics to Assess Material and Structural Properties

This report was created to serve as a manual for applying the Acousto-Ultrasonic NDE method, as practiced at NASA Glenn, to the study of materials and structures for a wide range of applications. Three state of the art acousto-ultrasonic (A-U) analysis parameters, ultrasonic decay (UD) rate, mean time (or skewing factor, "s"), and the centroid of the power spectrum, "f(sub c)," have been studied and applied at GRC for NDE interrogation of various materials and structures of aerospace interest. In addition to this, a unique application of Lamb wave analysis is shown. An appendix gives a brief overview of Lamb Wave analysis. This paper presents the analysis employed to calculate these parameters and the development and reasoning behind their use. It also discusses the planning of A-U measurements for materials and structures to be studied. Types of transducer coupling are discussed including contact and non-contact via laser and air. Experimental planning includes matching transducer frequency range to material and geometry of the specimen to be studied. The effect on results of initially zeroing the DC component of the ultrasonic waveform is compared with not doing so. A wide range of interrogation problems are addressed via the application of these analysis parameters to real specimens is shown for five cases: Case 1: Differences in density in [0] SiC/RBSN ceramic matrix composite. Case 2: Effect of tensile fatigue cycling in [+/-45] SiC/SiC ceramic matrix composite. Case 3: Detecting creep life, and failure, in Udimet 520 Nickel-Based Super Alloy. Case 4: Detecting Surface Layer Formation in T-650-35/PMR-15 Polymer Matrix Composites Panels due to Thermal Aging. Case 5: Detecting Spin Test Degradation in PMC Flywheels. Among these cases a wide range of materials and geometries are studied.

Kautz, Harold E.↗

Conservation laws and effective hadronization models

Hadronization models based on local string-breaking dynamics are typically Markovian by construction, yet the physical ensemble of final states is shaped by global constraints that couple the entire fragmentation trajectory. Recasting hadronization as a conditioned stochastic diffusion process provides a precise mathematical resolution to this tension. In particular, this language reveals explicitly that constraints stemming from conservation laws induce non-Markovian correlations between otherwise independent fragmentation steps, and that these correlations can be absorbed exactly into a renormalization of the local dynamics through a Doob $h$-transform. We develop this formalism for a $q\bar{q}$ string in the chiral limit, where the longitudinal-transverse factorization of the Lund kernel becomes exact, enabling systematic power counting and clean ultraviolet (UV)/infrared (IR) separation. The dynamics organize naturally into a tower of effective theories distinguished by the remaining string mass, spanning a UV fixed point with scale-invariant transport coefficients, an intermediate regime where transverse phase space induces controlled running, and an IR boundary layer where non-local effects enter at leading order. The tower exhibits genuine Wilsonian structure, including $β$-functions, anomalous dimensions, and systematic matching conditions. The resulting framework achieves a clean factorization of universal microscopic fragmentation dynamics from infrared constraint effects, and opens new directions for both the theoretical analysis and practical simulation of hadronization.

Menzo, Tony [Alabama U.; Fermilab] (ORCID:00000002↗

Climate Influences on Capacity Expansion Planning with Application to the Western U.S

Electric power system planners utilize a variety of planning tools to inform decisions concerning generation and transmission additions to the electric grid, the need for operational changes, and to evaluate potential stressors on the system. Numerous factors contribute to the planning process including projected fuel and technology costs, policy and load profiles. There is also a growing recognition of the interdependency of the electric grid with other natural and engineered systems. Here we explore how future climate change and hydropower operability might influence decisions related to electricity capacity expansion planning and operations. To do so we assemble a multi-model framework. Specifically, water resource modeling is used to simulate climate impacts on future water supply for thermoelectric and hydropower generation. Separately, temperature impacts on electricity load are evaluated. Together, these climate factors spatially constrain a capacity expansion model that projects generation and transmission additions to the grid. The projected new capacity-builds are then evaluated on their operations, reliability, and cost under average and extreme climate conditions using production cost modeling. This coupled framework is demonstrated on the electric grid in the Western U.S., supporting capacity expansion planning by WECC, the North American Electric Reliability Corporation (NERC) regional entity responsible for reliability assurance of the Western Interconnection. This region was selected in part because the West is unique in that it has high potential for renewable penetrations and is experiencing large retirements/displacements of baseload resources, primarily coal, leading to possible operational challenges in terms of changing resource mix and the need for resource flexibility. Toward this challenge, planning scenarios encompass a range of alternative energy, climate and drought futures. In this context we explore answers to two strategic questions: 1) How does changing climate influence electricity expansion planning (generation and transmission) and future operations, including type and capacity of new builds, system reliability, cost and environmental impacts? 2) How does the representation of hydropower in the modeling framework influence the evaluation of bulk power system operations? Results indicate that climate has a measurable influence on recommendations concerning the capacity, type and location of new generation and transmission additions, with up to 17 GW additional capacity needed by 2038 to meet peak loads (~6.6% increase over capacity-builds based on historical climate). The extent of additional infrastructure needs is strongly influenced by future water availability for hydropower and the potential deployment of demand response technologies. Systems designed for future climate conditions were found to maintain high system reliability under a range of electricity and water availability scenarios (including significant drought), with minimal system curtailments. Additional capacity needs due to higher load tend to increase cumulative 20-year investment and operating costs by $\$$5-$\$$17 billion and generation costs increase by 9 to 19%. Finally, changing the representation of hydropower flexibility has a relatively small influence on capacity expansion in the Western Interconnection through 2038, but hydropower flexibility impacts generation costs to a similar extent as climate.

13 HYDRO ENERGY↗