Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pulse Wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Small scale turbulence in the Crab Nebula: Evidence of lower hybrid parametric instabilities driven by the pulsar wave

Strong small scale turbulence is observed in the Crab Nebula from the temporal pulse broadening data. It is shown that the strong 30 Hz pulsar wave can parametrically excite instabilities near the lower hybrid frequency in the thermal plasma of the Crab Nebula with a characteristic wavelength of the order of the scale size a of the turbulence observed. These instabilities provided a coupling mechanism between the pulsar wave and the Nebula plasma.

Lee, L. C.↗
NASA NTRS1984

Ion resonances and ELF wave production by an electron beam injected into the ionosphere - ECHO 6

Two effects observed with electron antennas ejected from a sounding rocket launched into the ionosphere in March 1983 carrying electron beam guns are discussed. The sensor packages were ejected and travelled parallel to the vehicle trajectory. Electric potentials were measured between the single probes and a plasma diagnostic package while the gun injected electrons into the ionosphere in perpendicular and parallel 1 kHz directions. Signal pulses over the dc-1250 kHz range were detected. A kHz gun frequency caused a signal that decreased by two orders of magnitude between 45-90 m from the beam field line. However, the signal was detectable at 1 mV/m at 120 m, supporting earlier data that indicated that pulsed electron beams can cause ELF waves in space. Beam injection parallel to the magnetic field produced an 840 Hz resonance that could be quenched by activation of a transverse beam.

Winckler, J. R.↗
NASA NTRS1991

Generation of Pc 1 waves by the ion temperature anisotropy associated with fast shocks caused by sudden impulses

The high correlation of Pc 1 events with magnetospheric compressions is known. A mechanism is proposed which leads to the generation of Pc 1 waves. The interaction of a dynamic pressure pulse with the earth's bow shock leads to the formation of a weak fast-mode shock propagating into the magnetoshealth. The shock wave can pass right through a tangential discontinuity (magnetopause) and into the magnetosphere, without disturbing either of the structures. In a quasiperpendicular geometry, the shock wave exhibits anisotropic heating. This anisotropy drives unstable ion-cyclotron waves which can contribute to the generation of the Pc 1 waves which are detected. The viability of the mechanism is demonstrated with simulations. This mechanism could explain the peak in the occurrence of observed Pc 1 waves in the postnoon sector where a field-aligned discontinuity in the solar wind would most often be parallel to the magnetopause surface due to the average Parker-spiral magnetic-field configuration.

Mandt, M. E.↗
DOE OSTI2026

Interplay between Ultrafast Electronic and Librational Dynamics in Liquid Nitrobenzene Probed with Two-Color Four-Wave Mixing

Here, we present an experimental and theoretical study of the interplay between ultrafast electron dynamics and librational dynamics in liquid nitrobenzene. A femtosecond ultraviolet pulse and two femtosecond near-infrared pulses interact with nitrobenzene molecules, generating a four-wave mixing nonlinear signal measured in the Optical Kerr Effect geometry. The signal is measured to be nonzero only at negative time delays, corresponding to the near-infrared pulses arriving before the ultraviolet pulse. We perform time-dependent Quantum Master Equation calculations with classical libration to simulate the experiment. The simulations support the conclusion that the near-infrared pulses launch librational motion while creating electronic coherences resulting in a libration-modulated electronic nonlinear response. The analysis of the phase-matched four-wave mixing signals suggests a nonparametric process leaving the molecules in an excited electronic state, providing new insight into ultrafast nonlinear optical interactions in liquids and advancing toward probing ultrafast electronic coherences in complex molecular liquids.

Shivaram, Niranjan [Lawrence Berkeley National Lab↗
DOE OSTI2021

On the Effect of Beating during Nonlinear Frequency Chirping

Spectroscopic analyses of energetic particle (EP) driven bursts of MHD fluctuations in magnetically confined plasmas often exhibit chirps that occur simultaneously in groups of two or more. While the superposition of oscillations at multiple frequencies necessarily causes beating in the signal acquired by a localized external probe, self-consistent hybrid simulations of chirping EP modes in a JT-60U tokamak plasma have demonstrated the possibility of global beating, where the mode's electromagnetic field vanishes globally between beats and reappears with opposite phase [Bierwage et al., Nucl. Fusion 57, 016036 (2017)]. This implies that there can be a single coherent field mode that oscillates at multiple frequencies simultaneously when it is resonantly driven by multiple density waves in EP phase space. Conversely, this means that the EP density waves are mutually coupled and interfere with each other via the jointly driven field, a mechanism ignored in some theories of chirping. In this thesis-style treatise, we study the role of field pulsations in general and beating in particular using the Hamiltonian guiding center orbit-following code ORBIT with a reduced wave-particle interaction model in realistic geometry. Beating is found to drive the evolution of EP phase space structures. Additionally, a key mechanism is the pulsation of effective phase space islands combined with the alternation of their effective O- and X-points due to phase jumps between each beat. Observations: (1) Beating causes density wave fronts to advance radially in a pulsed manner and the resulting chirps become staircase-like. (2) The pulsations facilitate convective transfer of material between neighboring layers of phase space density waves. On the one hand, this may inhibit the early detachment of solitary phase space vortices. On the other hand, it facilitates the accumulation of hole and clump fragments into larger structures. (3) Long-range chirping is observed when massive holes or clumps detach and drift away from the turbulent belt around the seed resonance. It is remarkable that the detached vortices remain robust and,on average, maintain their concentric nested layers while being visibly perturbed by the field's continued beating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

All-optical temporal differentiation in hot standing-wave-dressed atoms

We propose a scheme to realize all-optical temporal differentiation calculation to input pulse in an inverse Y-type four-level atomic system driven by a strong standing-wave. Two optical blockades are created at individual wavelengths of two probe fields in presence of one single strong standing-wave field. On one hand, ultra-narrow transmission windows are produced for probe pulse field 1 when probe field 2 is so strong as a controlling field in EIT configuration. The system can be designed as a phase-reverter of weak probe field 1 and can perform temporal differentiation calculation to it because aπ phase shift is created. On the other hand, the blockade at probe field 2 can be burst in two-photon resonance configuration when probe field 1 becomes strong and saturated absorption takes effect. So a two-photon switching is also expected in this standing-wave-dressed atomic system. The scheme has a potential for an all-optical transistor in quantum logical circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1984

Some case studies of ocean wave physical processes utilizing the GSFC airborne radar ocean wave spectrometer

The NASA K sub u band Radar Ocean Wave Spectrometer (ROWS) is an experimental prototype of a possible future satellite instrument for low data rate global waves measurements. The ROWS technique, which utilizes short pulse radar altimeters in a conical scan mode near vertical incidence to map the directional slope spectrum in wave number and azimuth, is briefly described. The potential of the technique is illustrated by some specific case studies of wave physical processes utilizing the aircraft ROWS data. These include: (1) an evaluation of numerical hindcast model performance in storm sea conditions, (2) a study of fetch limited wave growth, and (3) a study of the fully developed sea state. Results of these studies, which are briefly summarized, show how directional wave spectral observations from a mobile platform can contribute enormously to our understanding of wave physical processes.

Jackson, F. C.↗
DOE OSTI2024

A parametrically programmable delay line for microwave photons

Delay lines that store quantum information are crucial for advancing quantum repeaters and hardware efficient quantum computers. Traditionally, they are realized as extended systems that support wave propagation but provide limited control over the propagating fields. Here, we introduce a parametrically addressed delay line for microwave photons that provides a high level of control over the stored pulses. By parametrically driving a three-wave mixing circuit element that is weakly hybridized with an ensemble of resonators, we engineer a spectral response that simulates that of a physical delay line, while providing fast control over the delay line’s properties. We demonstrate this novel degree of control by choosing which photon echo to emit, translating pulses in time, and even swapping two pulses, all with pulse energies on the order of a single photon. We also measure the noise added from our parametric interactions and find it is much less than one photon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1991

Simulations of pulsed electron beam injection during active experiments

Two-dimensional electromagnetic particle simulations are used to investigate the characteristics of the spacecraft charging, particle acceleration, and wave emissions during beam injection, turnoff and subsequent pulsing of the beam. It is shown that, during beam injection, the beam current is neutralized by a spatially separate return current region extending several tens of meters from the beam region, with the currents being closed across the field lines by the perpendicular acceleration of ambient plasma ions into the beam region. After beam turnoff, this current system reverses after a time lag of about an ion plasma period. The current reversal is accompanied by prolonged electron collection by the spacecraft near the beam region, preferential ion collection by sections of the spacecraft magnetically connected to the initial return current regions, and the creation of hot plasma extending well into the return current regions. Because of the time lag, the currents induced in the plasma during periodic beam injection can be strongly modified from the imposed beam current.

Winglee, R. M.↗
NASA NTRS1975

Ion effects on ionospheric electron resonance phenomena

Ion effects are often observed on topside-sounder-stimulated electron plasma wave phenomena and the present study is concerned with the spur effect relative to electron plasma resonance. A spur appears after a time delay corresponding to the proton gyroperiod and is observed mainly on the resonances at the electron plasma frequency and the harmonics of the electron cyclotron frequency. Proton spurs occur at the harmonic resonances only, when the electron plasma waves associated with these resonances are susceptible to the Harris instability and when the electromagnetic wave can be initiated by the sounder pulse. This instability results from a sounder-stimulated anisotropic electron velocity distribution. The observations suggest that energy is fed into the harmonics of the longitudinal plasma wave from the electromagnetic wave through wave-mode coupling. The observations were made during eight passes of the Alouette-2 satellite.

Benson, R. F.↗
DOE OSTI2024

Nanometer-Scale Acoustic Wave Packets Generated by Stochastic Core-Level Photoionization Events

We demonstrate that the absorption of femtosecond hard x-ray pulses excites quasispherical, high-amplitude, and high-wave-vector coherent acoustic phonon wave packets using an all hard-x-ray pump-probe scattering experiment. The time- and momentum-resolved diffuse scattering signal is consistent with an ensemble of 3D strain wave packets induced by the rapid electron cascade dynamics following photoionization at uncorrelated excitation centers. We quantify key parameters of this process, including the localization size of the stress field and the photon energy conversion efficiency into elastic energy. The parameters are determined by the photoelectron and Auger electron cascade dynamics, as well as the electron-phonon interaction. In particular, we obtain the localization size of the observed strain wave packet to be 1.5 and 2.5 nm for bulk SrTiO 3 and KTaO 3 single crystals, respectively. The results provide crucial information on the mechanism of x-ray energy deposition into matter and shed light on the shortest collective length scales accessible to coherent acoustic phonon generation using x-ray excitation. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗
NASA NTRS1990

High-Voltage Square-Wave Generator

Fast switching circuit puts out rectangular pulses of order of kilovolt or greater at typical repetition frequencies as high as hundreds of kilohertz and with rise times as short as 50 ns. Designed around power metal oxide/semiconductor field-effect transistors (MOSFET's). Optically isolated power MOSFET's in series rapidly switch output between high voltages V(sub 1) and V(sub 2). Used to supply power to pulsed laser or to modulate beam of charged particles in laboratory experiment or industrial process.

Bernius, Mark T.↗
NASA NTRS1996

Project ORION: Orbital Debris Removal Using Ground-Based Sensors and Lasers

About 100,000 pieces of 1 to 10-cm debris in low-Earth orbit are too small to track reliably but large enough to cripple or destroy spacecraft. The ORION team studied the feasibility of removing the debris with ground-based laser impulses. Photoablation experiments were surveyed and applied to likely debris materials. Laser intensities needed for debris orbit modification call for pulses on the order of lOkJ or continuous wave lasers on the order of 1 MW. Adaptive optics are necessary to correct for atmospheric turbulence. Wavelength and pulse duration windows were found that limit beam degradation due to nonlinear atmospheric processes. Debris can be detected and located to within about 10 microrads with existing radar and passive optical technology. Fine targeting would be accomplished with laser illumination, which might also be used for detection. Bistatic detection with communications satellites may also be possible. We recommend that existing technology be used to demonstrate the concept at a loss of about $20 million. We calculate that an installation to clear altitudes up to 800 km of 1 to 10-cm debris over 2 years of operation would cost about $80 million. Clearing altitudes up to 1,500 km would take about 3 years and cost about $160 million.

Campbell, J. W.↗
DOE OSTI2020

Scattering of an utlrashort laser pulse by a spherical air bubble

The scattering of an ultrashort laser pulse by an air bubble in water is investigated by means of the Lorenz-Mie theory and the Debye expansion. A 70 fs, 800 nm pulse is considered as a plane wave with a Gaussian temporal envelope. The transient response is treated with the theory derived from Gouesbet and Gréhan [ Part. Part. Syst. Charact. 17 , 213 –224 ( 2000 ) ], taking now into account chromatic dispersion and absorption of water. It is observed that contrary to the case of water droplet in air, the Debye modes p ≥ 1 start their transient scattering at the same time and the same angle (≈90 ° ) and for a large size parameter, they differentiate as time elapses. A parametric study on the size parameter and the spatial extension of the pulse is performed to identify regimes where the different Debye mode are distinguishable in time. Dependence on the scattering angle is also treated. Finally, by considering pulse chirp, it is shown that the laser/bubble distance has an influence on the separability of modes p = 0 and p = 1.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Laser-plasma acceleration beyond wave breaking

Laser wakefield accelerators rely on the extremely high electric fields of nonlinear plasma waves to trap and accelerate electrons to relativistic energies over short distances. When driven strongly enough, plasma waves break, trapping a large population of the background electrons that support their motion. Aside from limiting the maximum electric field, this trapping can lead to accelerated electron bunches with large energy spreads. Here we introduce a novel regime of plasma wave excitation and wakefield acceleration that allows for arbitrarily high electric fields while avoiding the deleterious effects of unwanted trapping. Here, the regime, enabled by spatiotemporal shaping of laser pulses, exploits the property that nonlinear plasma waves with superluminal phase velocities cannot trap charged particles and are therefore immune to wave breaking.

36 MATERIALS SCIENCE↗
NASA NTRS1998

Noncontact Acousto-Ultrasonics for Material Characterization

A NdYAG 1064 nm, laser pulse was employed to produce ultrasonic waves in specimens of SiC/SiC and SiC/Ti 6-4 composites which are high temperature materials of interest for aerospace applications. Air coupled transducers were used to detect and collect the signals used for acousto-ultrasonic analysis. Conditions for detecting ultrasonic decay signals were examined. The results were compared to those determined on the same specimens with contact coupling. Some non-contact measurements were made employing conventional air focused detectors. Others were performed with a more novel micromachined capacitance transducer. Concerns of the laser-in technology include potential destructiveness of the laser pulse. Repeated laser pulsing at the same location does lead to deterioration of the ultrasonic signal in some materials, but seems to recover with time. Also, unlike contact AU, the frequency regime employed is a function of laser-material interaction rather than the choice of transducers. Concerns of the air coupled-out technology include the effect of air attenuation. This imposes a practical upper limit to frequency of detection. In the case of the experimental specimens studied ultrasonic decay signals could be imaged satisfactorily.

Kautz, Harold E.↗
DOE OSTI2022

Real-time laser ultrasonic monitoring of laser-induced thermal processes

Abstract Intra- and inter-layer integrity of components fabricated with advanced manufacturing techniques, such as laser powder bed fusion, is dependent upon rapid heating, melting, and solidification processes. There is a need for new techniques to provide in situ feedback of these processes. Here a laser-based ultrasonic technique to probe thermal effects induced by a high-power continuous wave laser in titanium samples is described. Numerical simulations were performed to show that, for a spatially uniform heating beam, laser-induced surface acoustic waves are strongly influenced by surface heating conditions, are dispersive in the case of rapid heating, and that an abrupt velocity reduction happens upon the onset of surface melting. Furthermore, laser-based ultrasound experimental results which monitor the transient change of surface wave travel time associated with high power laser surface heating are provided. A pulsed laser is used to generate high frequency surface acoustic waves that propagate through the laser-heated region and are detected using a photorefractive crystal-based interferometer. Qualitative agreement is observed between theory and experiment with both showing a rapid reduction in the surface wave velocity at the onset of illumination and further decrease in surface wave velocity associated with melting. It is demonstrated that changes in the surface wave velocity can be used to track local heating and detect the onset of surface melting in real time.

36 MATERIALS SCIENCE↗