Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFLECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Extending the capillary wave model to include the effect of bending rigidity: X-ray reflectivity and diffuse scattering

The surface roughness of a thin film at a liquid interface exhibits contributions of thermally excited fluctuations. This thermal roughness depends on temperature (𝑇), surface tension (𝛾), and elastic material properties, specifically the bending modulus (𝜅) of the film. A nonzero 𝜅 suppresses the thermal roughness at small length scales compared to an interface with zero 𝜅, as expressed by the power spectral density of the thermal roughness. The description of the x-ray scattering of the standard capillary wave model (CWM), which is valid for zero 𝜅, is extended to include the effect of 𝜅. The extended CWM (eCWM) provides a single analytical form for both the specular x-ray reflectivity (XRR) and the diffuse scattering around the specular reflection, and recovers the expression of the CWM at its zero 𝜅 limit. This theoretical approach enables the use of single-shot grazing incidence x-ray off-specular scattering (GIXOS) measurements for characterizing the structure of thin films on a liquid surface. The eCWM analysis approach decouples the thermal roughness factor from the surface scattering signal, providing direct access to the intrinsic surface-normal structure of the film and its bending modulus. Moreover, the eCWM facilitates the calculation of reflectivity at any desired resolution (pseudo-XRR approach). The transformation into pseudo-XRR provides the benefit of using widely available XRR software to perform GIXOS analysis. The extended range of the vertical scattering vector (𝑄 𝑧 ) available with the GIXOS pseudo-XRR approach allows for a higher spatial resolution than with conventional XRR. Experimental results are presented for various lipid systems, showing strong agreement between conventional specular XRR and pseudo-XRR methods. This agreement validates the proposed approach and highlights its utility for analyzing soft, thin films.

36 MATERIALS SCIENCE↗

Stochastic Fitting of Specular X-ray Reflectivity Data Using StochFit

Specular X-ray reflectivity data provide detailed information on the electron density distribution at an interface. Typical modeling methods involve choosing a generic electron density distribution based on an initial speculation of the electron density profile from the physical parameters of the experimental system. This can lead to a biased set of solutions. StochFit provides stochastic model-independent and model-dependent methods for analyzing X-ray reflectivities of thin films at an interface. StochFit divides an electron density profile into many small boxes and stochastically varies the electron density of these boxes to locate the best fit to a measured reflectivity. Additionally, it provides the ability to perform model-dependent fitting with a stochastic search of the parameter space in order to locate the best possible fit. While model-independent profile search algorithms have been described previously, they are difficult to implement because of the heavy computational requirements, and there is a dearth of software available to the general scientific public utilizing these techniques. Several cases that illustrate the usefulness of these techniques are presented, with a demonstration of how they can be used in tandem.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Powder diffraction by fixed incident angle reflection using a curved position-sensitive detector

As curved position-sensitive detectors improve in angular resolution, the effects that fixed incident angle reflection have on X-ray diffraction peaks become more apparent. In this study the effects of sample transparency, incident beam height, detector resolution and sample displacement on the intensity, location, width and shape of powder diffraction peaks were examined. The functions describing each of these phenomena are presented and were successfully used to quantitatively model the diffraction peaks collected in this geometry. Three distinct regimes of diffraction peak resolution were identified from the phenomena that limit the peak variance. Pertinent criteria based on experimental parameters have been outlined to classify fixed incident angle reflection experiments into each regime. Guidelines for improvement of experimental resolution and for conducting analysis of data acquired using fixed incident angle reflection geometry and curved position-sensitive detectors are also provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of interface reaction in a B 4 C/Cr mirror at elevated temperature using soft X-ray reflectivity

Boron carbide is a prominent material for high-brilliance synchrotron optics as it remains stable up to very high temperatures. The present study shows a significant change taking place at 550°C in the buried interface region formed between the Cr adhesive layer and the native oxide layer present on the silicon substrate. An in situ annealing study is carried out at the Indus-1 Reflectivity beamline from room temperature to 550°C (100°C steps). The studied sample is a mirror-like boron carbide thin film of 400 Å thickness deposited with an adhesive layer of 20 Å Cr on a silicon substrate. The corresponding changes in the film structure are recorded using angle-dependent soft X-ray reflectivity measurements carried out in the region of the boron K-edge after each annealing temperature. Analyses performed using the Parratt recursive formalism reveal that the top boron carbide layer remains intact but interface reactions take place in the buried Cr–SiO2 region. After 300°C the Cr layer diffuses towards the substrate. At higher temperatures of 500°C and 550°C the Cr reacts with the native oxide layer and tends to form a low-density compound of chromium oxysilicide (CrSiOx). Depth profiling of Si and Cr distributions obtained from secondary ion mass spectroscopy measurements corroborate the layer model obtained from the soft X-ray reflectivity analyses. Details of the interface reaction taking place near the substrate region of boron carbide/Cr sample are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Total Internal Reflection Photoconductive Switch

We demonstrate a novel illumination technique for extrinsic photoconductive switches based on the creation of a total internal reflection trap to increase the optical path length. The optimal geometry is a square substrate illuminated from one of the corners along the diagonal, ensuring that the total internal reflection condition is maintained after any reflection off the device lateral sides. The optical absorption uniformity throughout the device bulk was improved by designing the entry window to have a cylindrical shape and by using a square core optical fiber as an illumination source. In conclusion, the concept is experimentally validated on a vanadium-doped silicon carbide device that shows approximately four-fold improvement in responsivity compared to normal illumination.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Numerical Computation of Clear-Sky Transmittance and Reflectance of Solar Radiation for the Modeling of PV System Performance

Modeling of photovoltaics (PV) system performance requires numerical computation of plane-of-array (POA) irradiances that are influenced by atmospheric absorption and scattering. Clear-sky transmittance and reflectance of diffuse irradiance are essential for the understanding of solar radiation related to multiple reflection between land surface and clouds. This study analytically solves the radiative transfer equation for clear-sky conditions and numerically computes the transmittance and reflectance of diffuse irradiance as functions of the optical thickness of the atmosphere. The computation will be implemented in all-sky radiative transfer models to improve their computational efficiency.

14 SOLAR ENERGY↗

Simulating Scintillator Light Collection Using Measured Optical Reflectance

To accurately predict the light collection from a scintillating crystal through Monte Carlo simulations, it is crucial to know the angular distribution from the surface reflectance. Current Monte Carlo codes allow the user to set the optical reflectance to a linear combination of backscatter spike, specular spike, specular lobe, and Lambertian reflections. However, not all light distributions can be expressed in this way. In addition, the user seldom has the detailed knowledge about the surfaces that is required for accurate modeling. We have previously measured the angular distributions within BGO crystals and now incorporate these data as look-up-tables (LUTs) into modified Geant4 and GATE Monte Carlo codes. The modified codes allow the user to specify the surface treatment (ground, etched, or polished), the attached reflector (Lumirror(R), Teflon(R), ESR film, Tyvek(R), or TiO paint), and the bonding type (air-coupled or glued). Each LUT consists of measured angular distributions with 4o by 5o resolution in theta and phi, respectively, for incidence angles from 0? to 90? degrees, in 1o-steps. We compared the new codes to the original codes by running simulations with a 3 x 10 x 30 mm3 BGO crystal coupled to a PMT. The simulations were then compared to measurements. Light output was measured by counting the photons detected by the PMT with the 3 x 10, 3 x 30, or 10 x 30 mm2 side coupled to the PMT, respectively. Our new code shows better agreement with the measured data than the current Geant4 code. The new code can also simulate reflector materials that are not pure specular or Lambertian reflectors, as was previously required. Our code is also more user friendly, as no detailed knowledge about the surfaces or light distributions is required from the user.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterization of zinc oxide thin film using atomic force microscopy and optimized X-ray reflectivity by genetic algorithm

For the nanostructured thin films, the study of surface physical parameters is often of crucial importance. For example, the transport properties of ZnO thin film are strongly affected by the geometry of this film. In this study sol—gel ZnO thin film was spin coated on glass substrate. The inverse problem of thin film characterization is formulated as a parameter identification problem in which a set of parameters corresponding to the thin film property can be found by minimizing fitness functions formulated using theoretical and experimental X-ray reflectivity. Atomic force microscopy (AFM) measurements used as an independent procedure for extracting structural parameters of the film and accurate interpretation of X-ray reflectivity data. After applying Fractal calculations on the AFM measured data the Genetic algorithm (GA) method was applied for extracting other important structural parameters. Optimization of specular X-ray reflectivity by GA method gives information along the depth such as thickness, roughness, and electron density profile of layers in the film.

36 MATERIALS SCIENCE↗

Low energy Ar{sup +} bombardment of GaN surfaces: A statistical study of ion reflection and sputtering

Statistical molecular dynamics simulations are performed to analyze the sputtering of w-GaN (wurtzite) and z-GaN (zinc blende) surfaces under 100 eV Ar{sup +} ion bombardment. Ion reflection and physical sputtering mechanisms are investigated as a function of the ion impact angle and the crystalline nature of samples. The probability of ion reflection is lower for the w-GaN phase and increases with the angle of incidence {theta}{sub i}. As {theta}{sub i} becomes more glancing, the reflected ions become more energetic and their angular distribution tends to narrow. The sputtering yields of w-GaN and z-GaN surfaces are maximum for {theta}{sub i}=45 deg. For near-normal incidence, the probability of sputtering is smaller for the w-GaN phase, suggesting that the atomic arrangement in the pristine state modifies the characteristics of the momentum transfer occurring between the ion and the surface atoms during the collision cascade. Atomic nitrogen sputters preferentially and represents 87% to 100% of sputtered species due to its lower mass. These statistical results differ from the predictions of continuous ion bombardment simulations since the surfaces are not allowed to evolve self-consistently during the gathering of impact statistics.

36 MATERIALS SCIENCE↗

Radiochromic film dosimetry: Reflection vs transmission scanning

The objective of this study was to compare the transmission and the reflection scanning reading modes of radiochromic MD-55 films of a document scanner. The use of the red channel of the red-green-blue images results in measurement accuracy that did not differ between the two reading modes. On the other hand, the scanner uniformity and temporal stability, the long-term stability of the film readings and the dynamic range is superior using the reflection mode. The dynamic range of dose measurements can be extended up to least 500 Gy using the alternative color channels by both reading techniques. Similar backscattering dose factors close to high Z inhomogeneities were found using both scanning modes. In conclusion, the use of reflection scanning mode of MD55 films was superior to the traditionally used transmission mode.

61 RADIATION PROTECTION AND DOSIMETRY↗

The Effect of Specular Reflectances on the Interaction of an Electromagnetic E Wave with a Thin Metal Film Placed between Two Dielectric Media

The interaction of an electromagnetic E wave with a thin metal film placed between two dielectric media is calculated in the case of different specular reflectances q{sub 1} and q{sub 2} for the reflection of electrons from the surface of the thin metal layer, in the case of variations in the values of dielectric permittivities ε{sub 1} and ε{sub 2} of the media, and in the case of different values of angle of incidence θ of the electromagnetic wave. The behavior of reflection coefficient R, transmission coefficient T, and absorption coefficient A in relation to the frequency of the external field is analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

'Forbidden' reflections in resonant diffraction of synchrotron radiation in yttrium aluminum garnet Y{sub 3}Al{sub 5}O{sub 12}

The purely resonant Bragg reflections (13, 13, 0) and (14, 0, 0) in yttrium aluminum garnet Y{sub 3}Al{sub 5}O{sub 12} at energies near the K absorption edge of yttrium have been studied experimentally and theoretically. The anisotropic tensor atomic factor of yttrium corresponding to dipole-dipole resonance transitions depends on three independent parameters changing with energy. The intensities of the reflections (14, 0, 0) and (13, 13, 0) are shown to depend on the parameter difference f{sub 1}(E) - f{sub 2}(E) and the parameter f{sub 3}(E), respectively, which are attributable to distortions of the wave functions of the excited atoms and change greatly with photon energy E. Studying various reflections has allowed one to determine the various components of the tensor atomic factor and to compare them with the results of numerical calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Complex resonance in Fresnel reflection of radiation pulses

The Fresnel reflection of radiation pulses with an exponential temporal amplitude profile is analyzed. The conditions for the relevance of the concept of reflectance at a complex frequency, the imaginary part of which determined the rate of time variation of the amplitude, are specified. For the radiation pulses under study, we demonstrate a complex resonance, i.e., an increase in the magnitude of reflectance for the complex frequency of incident radiation (trailing edge of a pulse) that approaches the complex frequency of natural oscillations of oscillators in the medium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transmission and reflection spectra of a photonic crystal with a Raman defects

Features of Raman gain of probe radiation in three-level atoms placed in a defect of a one-dimensional photonic crystal in the presence of laser radiation (pump) at an adjacent high-frequency transition have been theoretically investigated. It has been shown that there is a pump intensity range where narrow peaks (resonances) simultaneously appear in the transmission and reflection spectra of the probe field. Beyond this region, the peak in the transmission spectrum is transformed to a narrow dip. The spectral position of these peaks is determined by the Raman resonance and the transmittance and reflectance can be larger than unity at pump intensities from several microwatts per square centimeter to several tens of milliwatts per square centimeter. The nature of narrow peaks is due to a sharp dispersion of a nonlinear refractive index near the Raman resonance; this dispersion is responsible for a strong decrease in the group velocity of probe radiation. The proposed scheme makes it possible to obtain controlled ultranarrow resonances in the transmission and reflection spectra of the photonic crystal.

74 ATOMIC AND MOLECULAR PHYSICS↗

Coherent transmission and reflection of a two-dimensional planar photonic crystal

A method for modeling the radial distribution function for particles of a two-dimensional planar photonic crystal in the form of a monolayer of spatially ordered monodisperse spherical particles is proposed. The coherent transmission and reflection coefficients for layers under normal illumination are calculated in the quasi-crystalline approximation of the multiple wave scattering theory. The dependence of the coherent transmission and reflection of the layer on the degree of ordering of the spherical particles is investigated. The influence of the long-range order on the coherent transmission and reflection coefficients for layers with triangular, square, and hexagonal lattices is estimated. Monolayers of weakly absorbing dielectric and strongly absorbing metallic particles are considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Andreev reflection in rotating superfluid {sup 3}He-B

Andreev reflection of quasiparticle excitations from quantized line vortices is reviewed in the isotropic B phase of superfluid {sup 3}He in the temperature regime of ballistic quasiparticle transport at T ≤ 0.20T{sub c}. The reflection from an array of rectilinear vortices in solid-body rotation is measured with a quasiparticle beam illuminating the array mainly in the orientation along the rotation axis. The result is in agreement with the calculated Andreev reflection. The Andreev signal is also used to analyze the spin-down of the superfluid component after a sudden impulsive stop of rotation from an equilibrium vortex state. In a measuring setup where the rotating cylinder has a rough bottom surface, annihilation of the vortices proceeds via a leading rapid turbulent burst followed by a trailing slow laminar decay, from which the mutual friction dissipation can be determined. In contrast to the currently accepted theory, it is found to have a finite value in the zero-temperature limit: α(T→0) = (5 ± 0.5) × 10{sup −4}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reflection and backscattering of microwaves under doubling of the plasma density and displacement of the gyroresonance region during electron cyclotron resonance heating of plasma in the l-2M stellarator

Reflection and backscattering of high-power (400 kW) gyrotron radiation creating and heating plasma at the second harmonic of the electronic cyclotron frequency in the L-2M stellarator have been investigated experimentally. The effect of the displacement of the gyroresonance region from the axis of the plasma column under doubling of the plasma density on the processes of reflection and backscattering of microwave radiation has been examined. A near doubling of short-wavelength (k{sub ⊥} ≈ 30 cm{sup –1}) turbulent density fluctuations squared is observed. The change in the energy confinement time under variations of plasma parameters and characteristics of short-wavelength turbulence is discussed. A discrepancy between the measured values of the reflection coefficient from the electron cyclotron resonance heating region and predictions of the one-dimensional model is revealed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical reflection from the Bragg lattice of AsSb metal nanoinclusions in an AlGaAs matrix

The optical properties of metal-semiconductor metamaterials based on an AlGaAs matrix are studied. The specific feature of these materials is that there are As and AsSb nanoinclusion arrays which modify the dielectric properties of the material. These nanoinclusions are randomly arranged in the medium or form a Bragg structure with a reflectance peak at a wavelength close to 750 nm, corresponding to the transparency region of the matrix. The reflectance spectra are studied for s- and p-polarized light at different angles of incidence. It is shown that (i) As nanoinclusion arrays only slightly influence the optical properties of the medium in the wavelength range 700-900 nm, (ii) chaotic AsSb nanoinclusion arrays cause strong scattering of light, and (iii) the spatial periodicity in the arrangement of AsSb nanoinclusions is responsible for Bragg resonance in the optical reflection.

36 MATERIALS SCIENCE↗