Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROTATIONAL FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Subsonic, transonic, and supersonic nozzle flow by the inverse technique.

The inverse technique is used to obtain a mathematically and physically consistent solution of the flowfield in a nozzle from the mass generation surface through the supersonic region. The inverse method employs an assumed centerline function which is of the Cauchy type in that the values and the derivatives of the function are known. Since the Cauchy boundary conditions can give rise to numerical instabilities, the governing gasdynamic equations for rotational steady flow were transformed into a form which puts the geometry into a rectangular shape, and which spaces the network of interior points more finely in regions of the greatest gradients of the dependent variables. For arbitrarily specified centerline data, the solution of the governing flow equations may not exist, and if it does it may not depend continuously on the data.

Norton, D. J.↗
NASA NTRS1988

Stability of swirling gas flows

The stability of inviscid swirling gas flows to small nonaxisymmetric perturbations is considered. For small Brunt-Vaisala frequencies, the problem reduces to the classical Sturm-Liouville form and the oscillation theorem can be applied. The resulting necessary and sufficient stability condition is compared to various criteria in the literature and a limited numerical study of isothermal rigidly rotating Poiseuille flow. For given azimuthal and axial wavenumbers, it is found numerically that the higher inertial modes become unstable for successively lower Rossby numbers and that this sequence of critical values approaches the theoretical value from above.

Hultgren, Lennart S.↗
NASA NTRS2007

NASA/GE Highly-Loaded Turbine Research Program

An overview of the NASA/GE Highly-Loaded Turbine Research Program at the NASA Glenn Research Center is presented. The program is sponsored by the Subsonic Fixed Wing Project of the Fundamental Aeronautics Program. The goals of the turbine research program are presented along with their relationship to the higher-level program goals. Two turbine research programs are described; the highly-loaded, single-stage high pressure turbine (HPT) and the highly loaded low pressure turbine (LPT). The HPT program is centered on an extremely high pressure ratio single-stage turbine with an engine stage pressure ratio of 5.5. It was designed with a 33% increase in stage loading. It has shown performance levels 2 points better than current engines operating at the higher work level. Some advantages of the turbine include reduced weight and parts count. Optimization of the blade shape to reduce shock losses is described. The LPT program utilizes a four-stage low pressure turbine with an integral first stage vane/transition duct strut; counter-rotation; low-solidity blading; fully optimized flowpath including vanes, blades, and endwalls; and a fluidically controlled turbine vane frame/exit guide vane. The implementation of the LPT into GE s and NASA s test facilities is described. A description of NASA's Single Spool Turbine Facility that is currently under renovation is given. Facility limits on pressures, temperatures, flow rates, rotational speeds, and power absorption are described. The current renovation status is given.

Giel, Paul W.↗
NASA NTRS2010

Flux Transport and the Sun's Global Magnetic Field

The Sun s global magnetic field is produced and evolved through the emergence of magnetic flux in active regions and its transport across the solar surface by the axisymmetric differential rotation and meridional flow and the non-axisymmetric convective flows of granulation, supergranulation, and giant cell convection. Maps of the global magnetic field serve as the inner boundary condition for space weather. The photospheric magnetic field and its evolution determine the coronal and solar wind structures through which CMEs must propagate and in which solar energetic particles are accelerated and propagate. Producing magnetic maps which best represent the actual field configuration at any instant requires knowing the magnetic field over the observed hemisphere as well as knowing the flows that transport flux. From our Earth-based vantage point we only observe the front-side hemisphere and each pole is observable for only six months of the year at best. Models for the surface magnetic flux transport can be used to provide updates to the magnetic field configuration in those unseen regions. In this presentation I will describe successes and failures of surface flux transport and present new observations on the structure, the solar cycle variability, and the evolution of the flows involved in magnetic flux transport. I find that supergranules play the dominant role due to their strong flow velocities and long lifetimes. Flux is transported by differential rotation and meridional flow only to the extent that the supergranules participate in those two flows.

Hathaway, David H.↗
NASA NTRS1994

A mechanism to produce a dawn-dusk component of plasma flow during magnetic reconnection in the magnetotail

Magnetic reconnection between antiparallel field lines in the magnetotail is generally thought to produce plasma acceleration in the earthward-tailward direction. However, measurements of the plasma velocity in the magnetotail during substorm activity sometimes reveal a dawn-dusk component of plasma flow. In this paper, we show that a dawn-dusk component of plasma acceleration may be produced during reconnection if the neutral line is not perpendicular to the magnetic field. In this case, Magnetohydrodynamic (MHD) simulations show that reconnection between antiparallel field lines will initially produce plasma acceleration that is nearly parallel to the neutral line because the magnetic tension force is not opposed by a pressure gradient force in this direction. As the magnetic field topology evolves to a steady state, the plasma flow direction rotates until it is nearly parallel to the plane that initially contained the antiparallel magnetic field lines before reconnection (hereafter referred to as the initial field plane). However, the time required to reach a steady state (typically several hundred seconds in the magnetotail region) may be greater than the time during which the reconnection process is active. Consequently, bursts of plasma flow with a dawn-dusk component may occur in the magnetotail. The initial acceleration along the neutral line depends on the angle theta (sub B) between the neutral line and the initial field plane, with the largest burst of plasma flow along the neutral line occuring when theta (s ub B) = 45 degs.

Hawkins, J. G.↗
NASA NTRS2014

Counter-Rotatable Fan Gas Turbine Engine with Axial Flow Positive Displacement Worm Gas Generator

A counter-rotatable fan turbine engine includes a counter-rotatable fan section, a worm gas generator, and a low pressure turbine to power the counter-rotatable fan section. The low pressure turbine maybe counter-rotatable or have a single direction of rotation in which case it powers the counter-rotatable fan section through a gearbox. The gas generator has inner and outer bodies having offset inner and outer axes extending through first, second, and third sections of a core assembly. At least one of the bodies is rotatable about its axis. The inner and outer bodies have intermeshed inner and outer helical blades wound about the inner and outer axes and extending radially outwardly and inwardly respectively. The helical blades have first, second, and third twist slopes in the first, second, and third sections respectively. A combustor section extends through at least a portion of the second section.

Giffin, Rollin George↗
NASA NTRS1990

On oscillatory flow over topography in a rotating fluid

Quasi-geostrophic beta-plane motion of a homogeneous liquid over topography is considered for situations in which there is a time-periodic forcing of a zonal current. Such an oscillatory current generates a topographic Rossby wave response that has a complicated, but periodic, temporal structure. The linear solution grows resonances at all integer values of the beta-parameter. The nonlinear analysis demonstrates that for weak friction and forcing, the resonances are bent and multiple equilibria of the time-dependent Rossby wave states are possible in certain parameter ranges. While the basic forced flow in the absence of topography has no time-mean, the nonlinear amplitude equations show that a mean retrograde (westward) Eulerian zonal flow is generated in the interactions of the forced flow with the topography.

Hart, J. E.↗
NASA NTRS1998

The Role of Marangoni Convection for the FZ-Growth of Silicon

Fluctuations of the electrical resistivity due to inhomogeneous dopant distribution are still a serious problem for the industrial processing yield of doped silicon crystals. In the case of silicon floating-zone growth, the main sources of these inhomogeneities are time- dependent flows in the liquid phase during the growth process. Excluding radio frequency (RF) induced convection, buoyancy and thermocapillary (Marangoni) convection are the two natural reasons for fluid flow. Both originate from temperature/concentration gradients in the melt, buoyancy convection through thermal/concentrational volume expansion, and thermocapillary convection through the temperature/concentration dependence of the surface tension. To improve the properties of grown crystals, knowledge of the strength, the characteristic, and the relation of these two flow mechanisms is essential. By the use of microgravity, the effect and the strength of buoyancy (gravity dependent) and thermocapillary (gravity independent) convection can be separated and clarified. Applying magnetic fields, both convective modes can be influenced: fluid flow can either be damped (static magnetic fields) or overlaid by a regular flow regime (rotating magnetic fields). Two complementary approaches have been pursued: Silicon full zones (experiments on the German sounding rockets TEXUS 7, 12, 22, 29, and 36) with the maximum temperature at half of the zone height and silicon half zones (experiments on the Japanese sounding rockets TR-IA4 and 6) with the maximum temperature at the top of the melt. With the full zone arrangement, the intensity and the frequency of the dopant striations could be determined and the critical Marangoni number could be identified. The half zone configuration is suited to classify the flow pattern and to measure the amplitude and the frequency of temperature fluctuations in the melt by inserting thermocouples or temperature sensors into the melt. All experiments have been carried out in monoellipsoid mirror furnaces. Typical zone geometries are approx. 8 to 14 mm in diameter and height. The crystals grown under microgravity are compared to crystals grown in static axial magnetic fields (B<5 tesla) and in transversal rotating magnetic fields (B<7.5 mT / f=50 Hz). Experimental results are completed by 3D numerical simulations: the obtained temperature and concentration distribution in the melt confirm the damping effect of rotating magnetic fields and explain the change in the radial segregation under static magnetic fields.

Dold, P.↗
NASA NTRS1980

An alternative approach to the numerical simulation of steady inviscid flow

A numerical procedure for the efficient simulation of steady inviscid flow is described and its utility is demonstrated. The method is uniformly valid for application in the subsonic, transonic and supersonic flow regimes. It does not rely on the introduction of additional assumptions beyond those necessary to obtain the Euler equations from the Navier-Stokes equations, nor does it make use of a time-asymptotic solution of the unsteady equations of motion. Application of the herein-defined surrogate equation technique allows the formulation of stable, fully-conservative, type-dependent finite difference equations for use in obtaining numerical solutions to systems of first-order partial differential equations, such as the steady-state Euler equations or their various approximations. Computational results are presented for the full Euler equations used to simulate rotational subsonic flow and for the transonic small disturbance equations. For the latter case, a computational efficiency greater than that obtained by means of the standard perturbation potential approach is indicated.

Johnson, G. M.↗
NASA NTRS1992

Theoretical and computational study of rotating isotropic turbulence

The various flow regimes that occur in rotating isotropic turbulence and their associated turbulence structure are studied. Direct numerical simulations are conducted for moderate and rapid rotation rates and comparisons are made with the predictions of generalized Eddy Damped Quasi-Normal Markovian (EDQNM) approximations. It is shown that at high rotation rates the nonlinear transfer terms remain small and that the development of the spectrum is through pure viscous decay. This shows that the effect of rapid rotation on the turbulence kinetic energy is through the shutting off of the production term in the dissipation rate equation. At moderate and relatively rapid rates, the rotation causes a discernible anisotropy to develop in the integral length scale with a mild trend toward a two-dimensionalization of the flow. As the flow decays, the Rossby number decreases, leading again to the shutting off of the nonlinear transfer terms. For extremely rapid rotation rates, the anisotropies in the integral length scales are small and direct numerical simulation results are in good agreement with rapid distortion theory.

Mansour, N. N.↗
NASA NTRS1997

Vortex leading edge flap assembly for supersonic airplanes

A leading edge flap (16) for supersonic transport airplanes is disclosed. In its stowed position, the leading edge flap forms the lower surface of the wing leading edge up to the horizontal center of the leading edge radius. For low speed operation, the vortex leading edge flap moves forward and rotates down. The upward curve of the flap leading edge triggers flow separation on the flap and rotational flow on the upper surface of the flap (vortex). The rounded shape of the upper fixed leading edge provides the conditions for a controlled reattachment of the flow on the upper wing surface and therefore a stable vortex. The vortex generates lift and a nose-up pitching moment. This improves maximum lift at low speed, reduces attitude for a given lift coefficient and improves lift to drag ratio. The mechanism (27) to move the vortex flap consists of two spanwise supports (24) with two diverging straight tracks (64 and 68) each and a screw drive mechanism (62) in the center of the flap panel (29). The flap motion is essentially normal to the airloads and therefore requires only low actuation forces.

Rudolph, Peter K. C.↗
NASA NTRS1971

Film stability in a vertical rotating tube with a core-gas flow.

The linear hydrodynamic stability of a thin-liquid layer flowing along the inside wall of a vertical tube rotating about its axis in the presence of a core-gas flow is examined. The stability problem is formulated under the conditions that the liquid film is thin, the density and viscosity ratios of gas to liquid are small and the relative (axial) pressure gradient in the gas is of the same order as gravity. The resulting eigenvalue problem is first solved by a perturbation method appropriate to axisymmetric long-wave disturbances. The damped nature (to within the thin-film and other approximations made) of the nonaxisymmetric and short-wave disturbances is noted. In view of the limitations on a truncated perturbation solution when the disturbance wavenumber is not small, an initial value method using digital computer is presented. Stability characteristics of neutral, growing, and damped modes are presented showing the influences of rotation, surface tension, and the core-gas flow. Energy balance in a neutral mode is also illustrated.

Sarma, G. S. R.↗
NASA NTRS1985

Laser velocimeter measurements of the flow fields around single- and counter-rotation propeller models

A two-component LV system was used to make detailed measurements of the flow field around both a single-rotation and a counter-rotation propeller/nacelle. The conditions measured for the single-rotation tractor configuration include two different blade angles and two propeller advance ratios, and for the counter-rotation propeller configuration include both pusher and tractor mounts. The measurements show the increasing slipstream velocities and contraction with increasing blade angle and with decreasing advance ratios. Data for the counter-rotation system show that the aft propeller turns the flow in the opposite direction from the front propeller. Additionally, the LV system was used as a diagnostic tool to provide data to explain the large side force measured on the propeller/nacelle at angle-of-attack.

Dunham, D. M.↗
NASA NTRS2016

Bridgman Growth of Germanium and Germanium-Silicon Crystals under Microgravity

Four different Bridgman growth experiments on Ge:Ga and Ge(sub x)Si(sub 1-x) were performed under microgravity during the FOTON M4 flight in fall 2014 as joint German-Russian experiments. The experiments were also part of the RDGS/ICESAGE project(s) of ESA/NASA on detached growth of Ge and Ge-Si. Three experiments on Ge:Ga investigated different heat and mass transport regimes, i.e. mostly diffusive conditions, flows driven by a rotating magnetic field, and flows driven by vibration. The fourth experiment on Ge(sub 0.98)Si(0.02) investigated detached growth. All four experiments were successful and yielded crystals. Both the Ge-Si experiment and two of the Ge:Ga experiments showed stable detachment from the ampoule wall, although this was not planned for the latter two experiments. The influence of the rotating magnetic field as well as of the vibration was pronounced in the case of the microgram experiments, but dominated by buoyancy convection under 1g.

Croell, A.↗
NASA NTRS1998

A Search for Giant Convection Cells on the Sun

Giant convection cells (slow, long-lived cellular flows in the Sun's convection zone with typical diameters greater than about 100,000 km) have been the subject of many searches over the last 30 years. If such flows exist, they should play a key role in structuring the Sun's large scale magnetic field and in driving the large scale axisymmetric flows: the differential rotation and meridional circulation. Detailed observations of the flows in these cells may also allow us to better predict future magnetic field configurations and the solar activity associated with them. Line-of-sight velocity data from the Michelson Doppler Interferometer on the ESA/NASA Solar and Heliospheric Observatory provides us with new opportunities to search for giant cells. This data is free of any atmospheric distortion and has been obtained continuously without any day/night gaps for more than two months at a time. These two-month datasets are important because giant cells are expected to have lifetimes somewhat longer that the Sun's 27 day rotation period. Any reappearance of a flow pattern after 27 days would be an important confirmation of the existence of these cells. The approach taken in this search is to separate the giant cell velocity signal from the other, stronger velocity signals by using a spherical harmonic representation of the spatial structures and a fourier decomposition of the temporal behavior. Any giant cell signal should be characterized by low spatial wavenumbers with temporal frequencies appropriate to the solar rotation of these patterns.

Hathaway, David H.↗