Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reactor Kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Low Temperature CO 2 Hydrogenation on Unsupported Mo 2 C Catalysts

CO 2 hydrogenation to methanol, a key reaction for decarbonizing the fuel and chemical industries, requires catalyst formulations that hydrogenate CO 2 selectively to methanol at temperatures where methanol conversion is not significantly equilibrium limited (<423 K). Herein we report continuous CO 2 hydrogenation at low temperatures (348-408 K, H 2 /CO 2 = 0.1-50, 5-35 bar) with high selectivity to methanol (up to ca. 80%) over unsupported β-Mo 2 C catalysts. Active site density quantification via titration with trifluoroacetic acid at reaction temperatures enables an assessment of site-specific rates. Methanation and reverse water gas shift (RWGS) occur concurrently with methanol synthesis during CO 2 hydrogenation over Mo 2 C. Reaction pathway analysis, product cofeeds, and reversibility formalisms show that all products form through primary reaction pathways from CO 2 , but secondary reactions of CO contribute significantly to rates of methanation. Dependences of forward rates on reactant and product concentration determined by independently varying the CO 2 , H 2 , CO, H 2 O, CH 3 OH, and CH 4 pressure in conjunction with reversibility formalisms reveal that all products form through H-assisted CO 2 activation and involve partially hydrogenated CO 2 -derived intermediates. Here, these inferences were verified by quantitative agreement between measured site-time yields and site-time yields predicted by closed form kinetic rate expressions in an integral reactor model over widely varying conditions (85-2000 kPa H 2 , 80-1500 kPa CO 2 , 0-45 kPa H 2 O, 0-21 kPa CO, 0-25 kPa CH 3 OH, 0-75 kPa CH 4 , 5-87 mol Mo s s mol CO 2 -1 ). Coverages calculated based on the kinetic model reveal that the Mo 2 C surface is covered with bidentate CO- and CO 2 -derived intermediates of the stoichiometry H 2 CO 2 and H 2 CO, indicating that H 2 and CO x do not compete for surface occupancy but instead adsorb cooperatively to form partially hydrogenated intermediates. Hydrogenation of the CO-derived H 2 CO** intermediate favors methanation, while hydrogenation of CO 2 -derived H 2 CO 2 ** favors methanol synthesis. Together, these findings demonstrate the ability of unsupported Mo 2 C to catalyze the hydrogenation of CO 2 to methanol at low temperatures and provide insight into the reaction network and mechanisms involved in its formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the hydrogenation of SiCl4

A laboratory scale pressure reactor was constructed to study the 3 SiCl + 2H2 + Si yields 4 SiHCl3 reaction at pressures up to 500 psig. Reaction kinetic measurements were carried out as a function of reactor pressure, reaction temperature and H2/SiCl4 feed ratio. Based on the reaction kinetic data, the hydroclorination of SiCl4 and m.g. silicon metal is found to be an efficient process to produce SiHCl3 in good conversions and in high yields. Copper is an effective catalyst. Results of the corrosion study show that conventional nickel chromium alloys are suitable material of construction for the hydrochlorination reactor. The hydrochlorination reaction is relatively insensitive to external process parameters such as silicon particle size distribution and the impurities in the m.g. silicon metal.

Mui, J. Y. P.↗

Simulating Catalysis with Realistic Pellet Geometries Using Mesoflow: A Case Study of Catalytic Propane Dehydrogenation

We present a case study of catalytic propane dehydrogenation with our open-source multiphysics solver, Mesoflow. The solver was developed to simulate reactive flow coupled to heterogeneous catalytic reactions and deactivation in the context of complex, mesoscale geometry. The method leverages cartesian block-structured adaptive mesh refinement to capture realistic catalyst microstructural features acquired directly from X-ray computed tomography data. A kinetic model for propane dehydrogenation and catalyst deactivation was developed based on temporal analysis of products (TAP) reactor experiments. The TAP reactor experiments allow for precise characterization of intrinsic kinetic reaction steps which are implemented into Mesoflow simulations to model the spatial and temporal evolution of reactants, products, and catalyst active sites. The short-term and long-term deactivation behavior is studied by using XCT data collected from fresh and aged catalyst pellets, which exhibit different microstructural features. This study employs time-splitting algorithms to connect disparate reaction and flow timescales, enabling the simulations to achieve realistic deactivation timescales on the order of minutes while the flow time-scales for small particles (100 microns) are several milliseconds. We also introduce a flexible automated python script that writes the necessary files to construct a Mesoflow simulation from user-created chemical mechanisms. We will also introduce a few new features that are added to Mesoflow such as higher order schemes, implicit chemistry integrators and the ability to run on AMD and NVIDIA graphics-processing-units.

AMReX↗

Investigation and modeling of the degradation of Zr-based fuel claddings during corrosion in steam and air-steam mixtures at high temperatures - 6.3 STP-2016-0033

This paper presents the main results of a study conducted to quantify and to model the degradation state of Zr-based fuel claddings submitted to severe accident conditions in a nuclear reactor core: high temperatures and either pure steam or air-steam mixture. Due to the progressive thickening of a dense and protective ZrO{sub 2} layer, the oxidation kinetics of Zr-based claddings in steam at high temperatures typical of nuclear severe accidents, is generally cubic or parabolic. However, for some temperature domains, this oxide layer may crack, becoming porous and non-protective anymore. In these 'breakaway' conditions, the oxidation kinetics change from (sub-)parabolic to linear or even accelerated. Additionally, the temperature increase can lead core materials to melt and to relocate down to the vessel lower head, threatening its integrity. If it fails, and for specific conditions, air ingress may take place into the reactor. Hence, oxygen and nitrogen both react with Zr-based claddings, successively through oxidation of Zr (forming ZrO{sub 2} layer), nitriding of Zr (forming ZrN particles) and oxidation of ZrN (forming ZrO{sub 2} and releasing nitrogen). These self-sustained chemical reactions enhance the deterioration of Zr-based claddings and of their ZrO{sub 2} layers, inducing a rise of their open porosity. To quantify this porosity, a series of two-step experiments was conducted. First, Zirlo{sup TM} cladding samples were isothermally oxidized in various conditions: in pure steam or in 50- 50 mol% air-steam mix, at several temperatures, and for different durations. The main thermal effects on reaction kinetics and the high impact of air on the cladding degradation are all confirmed by experimental results. Second, pioneering porosimetry measurements by Hg intrusion were realized for the first time on such corroded cladding samples. In both atmospheres, it is pointed out that 1200 and 1250 K lead to particularly porous oxide layers, especially due to strong 'breakaway' effects. Moreover, it is confirmed that the presence of air strongly enhances the oxide cracking: cladding samples are more porous when oxidized in the air-steam mixture than under pure steam. Finally, it is observed that in all conditions, the open porous volume fraction of Zirlo{sup TM} claddings continuously rises during their corrosion process. Hence, for each experimental condition, porosity correlations are determined through linear regressions, and porosity increase rates are deduced by derivation versus time and validated against porosimetry results of cladding samples corroded in transient (nonisothermal) conditions. (authors)

36 MATERIALS SCIENCE↗

Experiment and modeling of CO{sub 2} capture from flue gases at high temperature in a fluidized bed reactor with Ca-based sorbents

The cyclic CO{sub 2} capture and CaCO{sub 3} regeneration characteristics in a small fluidized bed reactor were experimentally investigated with limestone and dolomite sorbents. Kinetic rate constants for carbonation and calcination were determined using thermogravimetric analysis (TGA) data. Mathematical models developed to model the Ca-based sorbent multiple cycles of CO{sub 2} capture and calcination in the bubbling fluidized bed reactor agreed with the experimental data. The experimental and simulated results showed that the CO{sub 2} in flue gases could be absorbed efficiently by limestone and dolomite. The time for high-efficiency CO{sub 2} capture decreased with an increasing number of cycles because of the loss of sorbent activity, and the final CO{sub 2} capture efficiency remained nearly constant as the sorbent reached its final residual capture capacity. In a continuous carbonation and calcination system, corresponding to the sorbent activity loss, the carbonation kinetic rates of sorbent undergoing various cycles are different, and the carbonation kinetic rates of sorbent circulating N times in the carbonation/calcination cycles are also different because of the different residence time of sorbent in the carbonator. Therefore, the average carbonation rate was given based on the mass balance and exit age distribution for sorbent in the carbonator. The CO{sub 2} capture characteristics in a continuous carbonation/calcination system were predicted, taking into consideration the mass balance, sorbent circulation rate, sorbent activity loss, and average carbonation kinetic rate, to give useful information for the reactor design and operation of multiple carbonation/calcination reaction cycles. 27 refs., 15 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Investigation and modeling of the degradation of zirconium-based fuel cladding during corrosion in steam and air-steam mixtures at high temperatures - 2016-0033

This paper presents the main results of a study conducted to quantify and to model the degradation state of zirconium-based fuel claddings submitted to severe-accident conditions in a nuclear reactor core: high temperatures and either pure steam or an air-steam mixture. Due to the progressive thickening of a dense and protective ZrO{sub 2} layer, the oxidation kinetics of zirconium-based claddings in steam at high temperatures typical of severe nuclear accidents are generally cubic or parabolic. However, for some temperature domains, this oxide layer may crack, becoming porous and no longer protective. In these 'breakaway' conditions, the oxidation kinetics change from (sub)parabolic to linear or even accelerated. In addition, the temperature increase can lead core materials to melt and to relocate down to the vessel lower head, threatening its integrity. If it fails, and for specific conditions, air ingress may take place into the reactor. Hence, oxygen and nitrogen both react with zirconium-based claddings successively through the oxidation of zirconium (forming a ZrO{sub 2} layer), nitriding of zirconium (forming zirconium nitride particles), and the oxidation of zirconium nitride (forming ZrO{sub 2} and releasing nitrogen). These self-sustained chemical reactions enhance the deterioration of zirconium-based claddings and their ZrO{sub 2} layers, inducing an increase in their open porosity. To quantify this porosity, a series of two-step experiments was conducted. First, ZIRLO{sup TM} cladding samples were isothermally oxidized in pure steam or in a 50:50 mol% air-steam mixture at several different temperatures and durations. The main thermal effects on reaction kinetics and the high impact of air on the cladding degradation were all confirmed by experimental results. Second, pioneering porosimetry measurements by mercury intrusion were realized for the first time on such corroded cladding samples. In both atmospheres, it was pointed out that 1,200 and 1,250 K led to particularly porous oxide layers, especially due to strong breakaway effects. Moreover, we confirmed that the presence of air strongly enhances the oxide cracking: cladding samples were more porous when oxidized in the air-steam mixture than under pure steam. Finally, we observed that in all conditions, the open porous volume fraction of ZIRLO claddings continuously rose during their corrosion process. Hence, for each experimental condition, porosity correlations were determined through linear regressions, and porosity increase rates were deduced by derivation versus time and validated against porosimetry results of cladding samples corroded in transient nonisothermal) conditions. (authors)

36 MATERIALS SCIENCE↗

Advancing Catalytic Fast Pyrolysis Through Integrated Experimentation and Multi-Scale Computational Modeling

This webinar will highlight recent results from a multi-disciplinary research effort in which integrated reaction testing was coupled with particle- and reactor-scale computational modeling to advance catalytic fast pyrolysis (CFP) for the production of renewable hydrocarbon fuels. Data will be presented from a series of ex situ CFP experiments in which a fixed bed of Pt/TiO2 was utilized with co-fed H2 to upgrade woody biomass pyrolysis vapors. Further discussion will include the application of these data towards the development of (1) a multiscale simulation framework to de-couple apparent kinetics from both intraparticle and reactor-scale transport phenomena and (2) a finite element computational model to understand and predict thermal excursions during catalyst regeneration. Throughout the presentation, the speakers will emphasize synergistic outcomes derived from the collaborative approach and highlight ongoing research efforts to accelerate technology maturation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Electrochemical Control for Corrosion in Molten Chlorides During CSP Plant Operation

The Liquid Pathway of the Concentrating Solar Power Generation 3 (CSP Gen3) program proposed low-cost molten chloride salt for energy storage. However, online corrosion control was identified as a remining major risk of the Liquid Pathway approach. This project addressed that risk. Electrochemical solutions for corrosion mitigation during CSP plant operation were investigated and their feasibility and scalability were evaluated. The leading cause of corrosion in molten chloride salt systems was identified as corrosive impurities that form within the salt upon exposure to trace amounts of air and moisture. Leveraging electrochemistry, reduction/oxidation reactions can be employed to remove these corrosive impurities. In Phase 1 of this project, a bench-scale batch electrochemical reactor was designed, fabricated, and used to assess the kinetics and thermodynamics of electrochemical salt purification. In Phase 2, a laboratory-scale flow reactor was designed, fabricated, and used to assess the efficacy of the electrochemical method under flowing conditions. Results show that under proposed operating conditions for the Liquid Pathway Gen3 Pilot Plant, the electrochemical method is significantly more effective at removing impurities than alternative chemical and thermal methods, and that the electrochemical method produces less harmful byproducts. A key advance made in the course of this project was the development of a 2-electrode method for electrochemical purification that is more scalable than previously developed 3 electrode methods. This novel method is based on Magnesium (Mg) electrowinning. A provisional patent based on this invention has been submitted (USPTO Application No. 63/480,355). Additional key advances made during this project include assessment of the effect of dissimilar alloys on corrosion, kinetic and thermodynamic evaluation of thermolysis reactions of impurities within the molten salt, characterization of byproducts of purification reactions, and generation of IP focused on isolating value-added products using molten salt-based electrochemistry that could be deployed to valorize the process (USPTO Application No. 63/478,806). Ultimately, this project represented a step toward feasibility of Liquid Pathway Gen3 CSP. The method developed under this project could significantly reduce capital expenses and operating costs and increase plant profitability by enabling use of less expensive alloys, decreasing maintenance, and increasing plant longevity. Key focus areas for follow-on work have been identified as 1) evaluation of the efficacy of the electrochemical method under turbulent conditions in a larger flow system, such as the FASTR loop, 2) development of methods for removal of purification byproducts, 3) modeling pilot and industrial scale performance of electrochemical salt purification during plant operation and 4) further assessment of the effect of impurities on salt vapor phase.

14 SOLAR ENERGY↗

Methodology for Estimating Thermal and Neutron Embrittlement of Cast Austenitic Stainless Steels During Service in Light Water Reactors

Cast austenitic stainless steel (CASS) materials, which have a duplex structure consisting of austenite and ferrite phases, are susceptible to thermal embrittlement during reactor service. In addition, the prolonged exposure of these materials, which are used in reactor core internals, to neutron irradiation changes their microstructure and microchemistry, and these changes degrade their fracture properties even further. This paper presents a revision of the procedure and correlations presented in NUREG/CR-4513, Rev. 1 (Aug. 1994) for predicting the change in fracture toughness and tensile properties of CASS components due to thermal aging during service in light water reactors (LWRs) at 280–330 °C (535–625 °F). The methodology is applicable to CF-3, CF-3M, CF-8, and CF-8M materials with a ferrite content of up to 40%. The fracture toughness, tensile strength, and Charpy-impact energy of aged CASS materials are estimated from known material information. Embrittlement is characterized in terms of room-temperature (RT) Charpy-impact energy. The extent or degree of thermal embrittlement at “saturation” (i.e., the minimum impact energy that can be achieved for a material after long-term aging) is determined from the chemical composition of the material. Charpy-impact energy as a function of the time and temperature of reactor service is estimated from the kinetics of thermal embrittlement, which are also determined from the chemical composition. The fracture toughness J-R curve for the aged material is then obtained by correlating RT Charpy-impact energy with fracture toughness parameters. A common “predicted lower-bound” J-R curve for CASS materials of unknown chemical composition is also defined for a given grade of material, range of ferrite content, and temperature. In addition, guidance is provided for evaluating the combined effects of thermal and neutron embrittlement of CASS materials used in the reactor core internal components. The correlations for estimating the change in tensile strength, including the Ramberg/Osgood parameters for strain hardening, are also described.

Chopra, O. K.↗

Conceptual design and optimization for a low-power ADS with a 70 MeV, 0.75 mA proton beam

In the framework of research on Generation IV reactors, it is very important to have infrastructures specifically dedicated to the study of fundamental kinetic and dynamic parameters of future fast-neutron reactors, a capability not provided by many presently available or planned zero-power prototypes. We propose the conceptual design of an ADS with high safety standards, in order to be used as a training facility, but also a good flexibility so as to allow for a wide range of static an dynamic measurements and experiments. A high safety standard is guaranteed by limiting the system power to less than 500 kW and the neutron multiplication coefficient k{sub eff} to less than 0.95 (a limiting value for waste storage areas), by using pure Uranium fuel (no Plutonium) and by using solid Lead as a diffuser. Lead has been chosen by considering this prototype to be a useful step towards the design of future Lead Fast Reactors, as well as because it allows a harder neutron spectrum, which facilitates tests on actinides fission, and provides meaningful data on the physics of this metal, which is one of the proposed coolants for future Generation IV reactors. The system is intrinsically subcritical and it needs an external neutron source to be sustained. Specific goal of the present work is to optimize design features of the core in such a way to meet previously declared requirements with the use of a commercially available accelerator in order to reduce costs and increase reliability. The conceptual design requires, in the 'full configuration', 60 active elements, each made by a solid Lead matrix of dimensions 92 x 92 x 1200 mm{sup 3}, each containing 81 Uranium oxide fuel rods, enriched 20% w/o in {sup 235}U. Protons, coming from a continuous cyclotron of 70 MeV in energy and 0.75 mA in beam current, are converted into neutrons by a Beryllium target. Cooling is provided by Helium gas, transparent to neutron and not subject to activation. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Catalytic hydrogenation of HMF to BHMF over copper catalysts

2,5-Bis(hydroxymethyl)furan (BHMF) is a bio-derived building block for polyester production, obtained via the hydrogenation of 5-hydroxymethylfurfural (HMF). First-principles thermodynamic equilibrium calculations indicate that this reaction is not thermodynamically limited under relevant conditions (e.g., 100 °C and high H 2 partial pressure). In this work, crude HMF was employed as the feedstock for BHMF synthesis. Initially, acidic impurities and humins were removed from unrefined HMF through filtration using a packed bed of γ-alumina. A comprehensive study of the filtration process is presented, including filtration kinetics, breakthrough curve analysis, and mathematical modeling. The purified HMF was subsequently hydrogenated over a 10 wt% CuZrO 2 catalyst, using ethanol as the reaction solvent. Batch reactions were first performed for collection of kinetic data to guide the transition to continuous flow operation. Kinetic data was collected in a fixed bed reactor at varying contact time, time on stream, temperature, and HMF concentration. This data was used to develop a kinetic model for HMF hydrogenation. Maximum BHMF production rates were achieved at 130 °C, accompanied by minor formation of byproducts from BHMF ring-opening reactions. The BHMF selectivity was 100 % at 100 °C although with lower reaction rates. Furthermore, catalyst stability tests revealed a loss of up to 50 % in catalytic activity within the first 24 h, likely due to the adsorption of HMF-derived oligomers that are not easily removed by filtration.

Crude HMF filtration↗