Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reservoir Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Significant life extension of lithium-ion batteries using compact metallic lithium reservoir with passive control

Both traditional graphite-based lithium-ion batteries and next generation silicon-based chemistries suffer significant capacity fade from loss of cyclable lithium due to continued solid-electrolyte interphase growth. A possible engineering solution to maintaining the capacity of cells is incorporating a metallic lithium reservoir and discharging the reservoir into a working electrode to make up for lost cyclable lithium. Here, metallic lithium reservoirs are inserted into both pouch- and cylindrical-format cells. Significant capacity recovery and lifetime extension are demonstrated for traditional graphite and Si/graphite-based cells. In this work, a combination of post-mortem characterization and modeling provide insight into how the lithium distribution as a function of position from reservoir vary with recovery rate. The potential of using passive control to potentially eliminate the need for extra wiring for the third electrode is explored using a simple resistor.

25 ENERGY STORAGE↗

The multiple depleted mantle components in the Hawaiian-Emperor chain

Oceanic island basalts are targeted for geochemical study because they provide a direct window into mantle composition and a wealth of information on the dynamics and timescales associated with Earth mixing. Previous studies mainly focused on the shield volcanic stage of oceanic islands and the more fusible, enriched mantle components that are easily distinguished in those basalts. Mantle depleted compositions are typically more difficult to resolve unless large amounts of this material participated in mantle melting (e.g., mid-ocean ridges), or unique processes allow for their compositions to be erupted undiluted, such as very small degrees of melting of a source with minimal fusible enriched components (e.g., rejuvenated basalts) or as xenoliths (e.g., abyssal peridotites). Mantle depleted components, defined here as material with low time-integrated Rb/Sr (low 87 Sr/ 86 Sr) and high time-integrated Sm/Nd and Lu/Hf ratios (high 143 Nd/ 144 Nd and 176 Hf/ 177 Hf) relative to primitive mantle, derive from a potentially very large volume reservoir (up to 80% of the mantle), and therefore need adequate characterization in order estimate the composition of the Earth and mantle-derived melts. Here, this review focuses on mantle depleted compositions in oceanic island basalts using the Hawaiian-Emperor chain as a case study. The Hawaiian-Emperor chain is the ~6000 km long geological record of the deeply sourced Hawaiian mantle plume, active for >81 Myr. Hawaiian volcanism evolves through four volcanic stages as a volcano traverses the Hawaiian plume: alkalic preshield, tholeiitic shield (80–90% volcano volume), alkalic postshield (~1%), and silica undersaturated rejuvenated (<0.1%). We report Pb-Sr-Nd-Hf isotope compositions and trace element concentrations of three rejuvenated Northwest Hawaiian Ridge basalts and compare them to an exhaustive compiled dataset of basalts from the Hawaiian Islands to the Emperor Seamounts. The Northwest Hawaiian Ridge (NWHR) includes 51 volcanoes spanning ~42 m.y. between the bend in the Hawaiian-Emperor chain and the Hawaiian Islands where there is no high-precision isotopic data published on the rejuvenated-stage over ~47% of the chain. NWHR and Hawaiian Island rejuvenated basalts are geochemically similar, indicating a consistent source for rejuvenated volcanism over ~12.5 million years. In contrast, shield-stage basalts from the oldest Emperor Seamounts are more depleted in isotopic composition (i.e., higher 176 Hf/ 177 Hf, and 143 Nd/ 144 Nd with lower 87 Sr/ 86 Sr and 208 Pb*/ 206 Pb*) and trace element concentrations (i.e., much lower concentrations of highly incompatible elements) than all other depleted Hawaiian basalts younger than the bend, including NWHR rejuvenated basalts. The strongly depleted source for the oldest Emperor Seamounts (>70 Ma) was likely related to interaction with the Kula-Pacific-Izanagi mid-ocean ridge spreading system active near the Hawaiian plume in the Late Cretaceous. In contrast, the incompatible trace element ratios of NWHR rejuvenated basalts require a distinct source in the Hawaiian mantle plume that was imprinted by ancient (>1 Ga) partial melting, likely ancient recycled oceanic lithosphere. This review of the geochemistry of Hawaiian depleted components documents the need for the sampling of multiple distinctive depleted compositions, each preferentially melted during specific periods of Hawaiian plume activity. This suggests that the composition of depleted components can evolve during the lifetime of the mantle plume, as observed for enriched components in the Hawaiian mantle plume. Changes in the composition of depleted components are dominantly controlled by the upper mantle tectonic configurations at the time of eruption (i.e., proximity to a mid-ocean ridge), as this effect overwhelms the signal imparted by potentially sampling different lower mantle components through time.

07 ISOTOPE AND RADIATION SOURCES↗

Benefits and Costs of Brine Extraction for Increasing Injection Efficiency In geologic CO2 Sequestration

Pressure increases attendant with CO2 injection into the subsurface drive many of the risk factors associated with commercial-scale CCS projects, impacting project costs and liabilities in a number of ways. The area of elevated pressure defines the area that must be characterized and monitored; pressure drives fluid flow out of the storage reservoir along higher-permeability pathways that might exist through the caprock into overlying aquifers or hydrocarbon reservoirs; and pressure drives geomechanical changes that could potentially impact subsurface infrastructure or the integrity of the storage system itself. Pressure also limits injectivity, which can increase capital costs associated with installing additional wells to meet a given target injection rate. The ability to mitigate pressure increases in storage reservoirs could have significant value to a CCS project, but these benefits are offset by the costs of the pressure mitigation technique itself. Of particular interest for CO2 storage operators is the lifetime cost of implementing brine extraction at a CCS project site, and the relative value of benefits derived from the extraction process. This is expected to vary from site to site and from one implementation scenario to the next. Indeed, quantifying benefits against costs could allow operators to optimize their return on project investment by calculating the most effective scenario for pressure mitigation. This work builds on research recently submitted for publication by the authors examining the costs and benefits of brine extraction across operational scenarios to evaluate the effects of fluid extraction on injection rate to assess the cost effectiveness of several options for reducing the number of injection wells required. Modeling suggests that extracting at 90% of the volumetric equivalent of injection rate resulted in a 1.8% improvement in rate over a non-extraction base case; a four-fold increase in extraction rate results in a 7.6% increase in injection rate over the no-extraction base case. However, the practical impacts on capital costs suggest that this strategy is fiscally ineffective when evaluated solely on this metric, with extraction reducing injection well needs by only one per 56 (1x case) or one per 13 (4x case).

54 ENVIRONMENTAL SCIENCES↗

Pore size effects on the sorption of supercritical carbon dioxide in mesoporous CPG-10 silica

Excess sorption isotherms of supercritical carbon dioxide in mesoporous CPG-10 silica glasses with nominal pore sizes of 75 (7.5 nm) and 350 (35 nm) were measured gravimetrically at 35 C and 50 C and pressures of 0-200 bar. Formation of broad maxima in the excess sorption was observed at fluid densities below the bulk critical density. Positive values of excess sorption were measured at bulk densities below about 0.65-0.7 g/cm3, whereas zero and negative values were obtained at higher densities, indicating that the interfacial fluid becomes less dense than the corresponding bulk fluid at high fluid densities. A shift of the excess sorption peak position to higher fluid density is found with increasing pore width. The excess sorption of CO2 normalized to the specific surface area is higher for the 35 nm pore size material, suggesting pore confinement effects. Conversely, the pore volume normalized excess sorption is higher for the 7.5 nm pore size material. Assessment of mean pore density reveals regions of constant pore fluid density, located between the excess sorption peak and the adsorption/depletion transition. Both materials exhibit such regions of constant mean pore fluid density as a function of bulk CO2 density at the lower temperature of 35 C, but not at 50 C. The results of this study suggest that the CO2 storage capacity in quartz-rich reservoirs is higher for sites with low temperature and rock textures characterized by narrow pores with high surface to volume ratios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Seismic imaging of the Ecuadorian forearc and arc from joint ambient noise, local, and teleseismic tomography: catching the Nazca slab in the act of flattening

SUMMARY The Ecuadorian Andes are a complex region characterized by accreted oceanic terranes driven by the ongoing subduction of the oceanic Nazca plate beneath South America. Present-day tectonics in Ecuador are linked to the downgoing plate geometry featuring the subduction of the aseismic, oceanic Carnegie Ridge, which is currently entering the trench. Using seismic tomography, we jointly invert arrival times of P and S waves from local and teleseismic earthquakes with surface wave dispersion curves to image the structure of the forearc and magmatic arc of the Ecuadorian Andes. Our data set includes > 100 000 traveltimes recorded at 294 stations across Ecuador. Our images show the basement of the central forearc is composed of accreted oceanic terranes with high elastic wave speeds. Inboard of the Carnegie Ridge, the westernmost forearc and coastal cordilleras display relatively low Vp and Vs and high Vp/Vs values, which we attribute to the increased hydration and fracturing of the overriding plate due to the subduction of the thick oceanic crust of the Carnegie Ridge. We additionally image across-arc differences in magmatic architecture. The frontal volcanic arc overlies accreted terranes and is characterized by low velocities and high Vp/Vs indicative of partial melt reservoirs which are limited to the upper crust. In contrast, the main arc displays regions of partial melt across a wider range of depths. The Subandean zone of Ecuador has two active volcanoes built on continental crust suggesting the arc is expanding eastwards. The mid to lower crust does not show indications of being modified from the magmatic process. We infer that the slab is in the process of flattening as a consequence of early-stage subduction of the buoyant Carnegie Ridge.

58 GEOSCIENCES↗

Site Characterization of the Highest-Priority Geologic Formations for CO2 Storage in Wyoming

The project Site Characterization of the Highest-Priority Geologic Formations for CO2 Storage in Wyoming is one of 9 site characterization projects that were implemented as part of ARRA (American Recovery and Reinvestment Act). Data from this project was used to improve resolution of data in NATCARB in the area of study. Data related to this study has already been incorporated in NATCARB Atlas. The Wyoming Carbon Underground Storage Project (WY-CUSP) consisted of CO2 storage site characterization and evaluation, focusing on Wyoming’s most promising CO2 storage reservoirs (the Pennsylvanian Weber/Tensleep Sandstone and Mississippian Madison Limestone) and premier CO2 storage site (Rock Springs Uplift). Results from the WY-CUSP project suggest the two reservoirs could store up to 17,000 million tons of CO2. The WY-CUSP team drilled a stratigraphic test well and acquired a 3-D seismic survey covering 25 square miles of the Rock Springs Uplift site. The team retrieved 916 feet of core from the 12,810-foot-deep well, along with a complete log suite, borehole images, fluid samples, and other data. Project partners (1) provided continuous visual documentation of the core, including grain size, mineralogy, facies distribution, and porosity; (2) performed continuous permeability and velocity scans of selected reservoir intervals; and (3) chemically analyzed the fluid samples. WY-CUSP scientists integrated seismic attributes with observations from log suites, a VSP survey, core, fluid samples, and laboratory analyses, including continuous permeability scans. From these integrations, researchers constructed 3-D spatial distribution volumes of reservoir and seal properties that represent geological heterogeneity at the targeted CO2 storage site. The WY-CUSP team used this data to perform new CO2 plume migration simulations. Baker Hughes, Inc., completed a series of small-scale, in-situ water injectivity measurements. A database was formed when observations, analyses, and experiments from the stratigraphic test well were integrated. Correlation of these data allowed petrophysical parameters to be extrapolated from the test well out into the storage domain (5x5 mile 3-D seismic survey volume). This resulted in an improved, realistic understanding of performance assessments for potential CO2 storage scenarios. The WY-CUSP team worked on (1) improving CO2 storage resource estimates, (2) establishing long-term integrity and permanence of confining layers, (3) designing a profitable strategy for pressure management, and (4) evaluating the utilization of stored CO2 at the Rock Spring Uplift. Finally, Baker Hughes developed a microseismic baseline for the test site using in-bore geophones to complete field operations.

3-D seismic↗

Feasibility Evaluation of Potential Stimulation Methods for Collab Experiment 3. Recommendation Report

In support of the Collab Project Milestone 1.4, INL is to submit a recommendation report describing feasible methods to investigate during Experiment 3 to DOE. This report fulfils this FY18Q1 SMART milestone. Twenty one potential methods were consideration for testing as part of Collab Experiment 3. The potential methods have been categorized as; Fracture Initiation, Stimulation Fluids, Stimulation Methods and Flow Control. The categories have been further divided into three general groups (e.g. high, medium, low) based on applicability to the scale of measurement at Collab (~10 meter) and it’s applicably to FORGE. The highest relevant methods (not necessary in order) are: 1) fracture initiation within the borehole, 2) use of slickwater fracturing fluids, 3) use of viscous fracturing fluids, 4) simultaneous stimulation of multiple wells, 5) use of energetic fluids to initiate larger fractures or connect a borehole to existing fractures, 6) injection of diverters to control short circuits and working fluid loss, 7) testing of borehole isolation techniques to control water flow pathways in the reservoir, and 8) use of multiple injection and production wells to characterize a fracture. Fractures created in Experiments 1 and 2 offer the opportunity to test engineering solutions to issues encountered in the stimulation process or during the fracture flow testing. An advantage of using these sites is that there would be a wealth of baseline characterization data for the site, and the borehole monitoring system and experimental infrastructure is already established and could possibly be reused. This suggested potential method list should be considered preliminary due to the timing of this report and the status of Collab Experiments 1 and 2 as well as the need for preliminary modeling to assess each of the proposed methods effectiveness.

15 GEOTHERMAL ENERGY↗

Assessing the Behavior of Moderately Volatile Elements on the Moon in Order to Constrain Processes of Magmatic Evolution and Planetary Accretion

Heterogeneous isotopic compositions of Zn and Ga in lunar basalts and highlands rocks indicate that secondary processing affected the stable isotopic composition of major lunar reservoirs. It follows that these fractionating processes must be identified and characterized in order to make robust estimates for the isotopic composition of the mare basalt source regions or the bulk silicate Moon (BSM). Contrary to previous assertions (e.g., Kato & Moynier, 2017), MVEs such as Zn and Ga do not behave similarly on the Moon, in line with differences in their chemical behavior and volatility. There is clear evidence that impact reworking fractionates zinc isotopes but, in addition, zinc isotopes are also highly sensitive to the formation of Ti-bearing oxides such as ilmenite. In contrast, gallium is far less susceptible to volatile reworking, but its isotopic composition is fractionated during incorporation into plagioclase (Wimpenny et al., 2022; Render et al., 2023). Based on these findings we conclude that current isotopic compositions of Zn and Ga in lunar rocks, such as those measured for the mare basalt suite, are unlikely to be representative of the bulk Moon when it accreted. As such, estimates for the MVE isotopic composition of the BSM derived from mare basalts may not be accurate, which may have implications for the incorporation of these data into dynamical models of the Moon’s formation. In the following, we discuss the main findings from this project in more detail, focusing on the behaviour of zinc and gallium isotopic systematics in lunar rocks and the processes that control their isotopic fractionation on the Moon.

58 GEOSCIENCES↗

Thermal-Fluid Analysis of a Liquid-Cooled Battery Module for Electrified Aircraft

The development of safe, energy-dense batteries is critical to advancing hybrid electric and fully electrified aircraft propulsion. Achieving this capability requires a thermal management system that can maintain battery performance and safety under demanding operational conditions. The objective of this project is to support the maturation of next-generation lithium-ion batteries for electrified aircraft by conducting performance testing on integrated battery modules, specifically a 2-cell series configuration module housed within an aluminum enclosure. Designed to operate at a nominal 7.2 V with discharge rates up to 2.5C, the module will eventually be used to power an electric motor and DC-DC converter, generating substantial thermal loads that must be effectively managed to increase the usable energy and power density of electrified aircraft. To address these thermal challenges, this study presents the development and thermal-fluid analysis of a liquid-cooled thermal management system. While the full aircraft architecture utilizes an eight-string configuration, the present work evaluates a representative single-string water coolant loop to characterize baseline performance. The active cooling loop circulates water through a reservoir, pump, the battery module, and a variable area flow meter. Key performance metrics including component-level temperatures, mass flow rates, and pressure drops are quantified across the loop. Across discharge rates ranging from 0.5C to 2.5C, the active thermal loop consistently and effectively removed heat from the module, validating the design approach and confirming readiness for further development. The validated thermal performance indicates a path toward scalable battery modules that could enable energy and power dense systems for hybrid electric aircraft.

Electrified Aircraft↗

Geothermal Exploration North of Mount St. Helens: Washington State Play-Fairway Project

Active seismicity within a broad zone in proximity to volcanism in the St. Helens Seismic Zone north of Washington State’s Mount Saint Helens provide key ingredients for hydrothermal circulation at depth. This seismicity extends well north of the volcanic edifice below where several faults and associated fractures in outcrop record repeated slip, dilation and alteration indicative of localized fluid flow. Candidate reservoir rocks include marine metasediments overlain by extrusive volcanics. This study characterizes the faults and fractures in the extrusives which are available in outcrop and sampled along well TGH17-24 and Plate Boundary Observatory strainmeter borehole, B201. Outcrop mapping and borehole image log analysis down to 250 m document abundant volcaniclastic deposits and basalt flows that are highly fractured, although intervening ash layers truncate the vertical extent of many of these structures. However, strike slip faults with well-developed gouge zones and adjacent localized high fracture density provide potential for vertically extensive fracture flow paths. Where these rocks are altered by intrusion, they develop high fracture density that can support heat transfer. Borehole image logs further record breakout that indicate the azimuth of SHmax in the shear zone is approximately 054/234°±23.6°, consistent with seismically active strike slip faults in the seismic zone, faults mapped in outcrop and evident in the borehole image logs, and with of plate convergence data. Furthermore, temperature profiles in two wells indicate isothermal conditions at average groundwater temperatures, consistent with rapidly flowing water localized within fractures.

drill↗

Stochastic modeling of phosphorus transport in the Three Gorges Reservoir by incorporating variability associated with the phosphorus partition coefficient

Phosphorus (P) fate and transport plays a crucial role in the ecology of rivers and reservoirs in which eutrophication is limited by P. A key uncertainty in models used to help manage P in such systems is the partitioning of P to suspended and bed sediments. By analyzing data from field and laboratory experiments, we stochastically characterize the variability of the partition coefficient (Kd) and derive spatio-temporal solutions for P transport in the Three Gorges Reservoir (TGR). We formulate a set of stochastic partial different equations (SPDEs) to simulate P transport by randomly sampling Kd from the measured distributions, to obtain statistical descriptions of the P concentration and retention in the TGR. The correspondence between predicted and observed P concentrations and P retention in the TGR combined with the ability to effectively characterize uncertainty suggests that a model that incorporates the observed variability can better describe P dynamics and more effectively serve as a tool for P management in the system. This study highlights the importance of considering parametric uncertainty in estimating uncertainty/variability associated with simulated P transport.

Partition coefficient↗

Monitoring and Modeling Caprock Integrity at the In Salah Carbon Dioxide Storage Site, Algeria

The In Salah gas development project, initiated in 2004, involves the long-term storage of waste carbon dioxide associated with natural gas production at several central Algerian fields. Rather then vent the extracted CO 2 into the atmosphere the operators, BP, Sonatrach, and Statoil chose to have the gas compressed, dehydrated, transported, and injected into a deep saline aquifer leg of the Krechba gas reservoir (Matheison et al. 2011). For this effort three horizontal state-of-the-art injection wells were drilled to a depth of 1500-1800m, using geo-steering technology to follow the roughly 20m thick reservoir. To maximize the injectivity, the wells were oriented perpendicular to the direction of maximum stress, the dominant fracture direction. Long-term plans were to store up to 17 million tonnes of carbon dioxide during the life of the program (Matheison et al. 2010). The project at In Salah was a pioneering effort in several respects and involved the investment of over 100 million dollars by the member companies. One feature that distinguishes In Salah from several other industrialscale CO 2 sequestration projects, such as Sleipner (Chadwick et al. 2012), Weyburn (White et al. 2011), Decatur (Kaven et al. 2014), and Aquastore (Worth et al. 2014) is the generally smaller storage volume in terms of overall reservoir thickness and lower average porosities of around 15%. With the exception of Weyburn, these other sites are characterized by generally thick sequences of high porosity sandstones. Therefore, one might expect that the pressure buildup near the wells could be larger at In Salah, with consequences for reservoir deformation and caprock strain. The role of fractures in providing storage and increasing reservoir permeability is one factor that would likely impact the pressure distribution around the well. However, the detailed effect of existing fractures on flow was not established prior to the injection at In Salah. The unique features of the In Salah storage site point to the importance of wellbore, geophysical, and geochemical monitoring to ensure that the integrity of the storage complex is maintained both during and after injection. In 2005 a Joint Industry Project (JIP) was set up, in an effort to use various geophysical, geochemical, and production techniques to monitor the fate of the injected carbon dioxide (Matheison et al. 2011). Here in this paper we describe the efforts made to monitoring the fate of the injected carbon dioxide, the state of the caprock, the estimated outcome of the storage effort, and some of the uncertainties that remain.

58 GEOSCIENCES↗

Seeding Method for Velocimetry and Visualization of Supersonic Retropropulsion Nozzle Plumes

In the current work, the “Venturi seeder” method for nozzle plumes is improved and studied to determine suitability for particle image velocimetry. This seeding method involves independently pressurizing the primary flow path and a separate seed liquid reservoir, connecting them at the throat of a Venturi contraction upstream of the nozzle. The pressure differential at the throat causes the liquid to enter the nozzle channel where it is atomized into particles by strong shearing forces. This new seeding system was characterized by conducting a series of diagnostics using different exit nozzle pressure ratios and seed reservoir pressures. Shadowgraph imaging confirmed the nozzle plumes to be underexpanded jets. A particle sizing device determined that generated DEHS oil particles had median aerodynamic diameters of 0.67, 0.69, and 0.73 μm for seed liquid reservoir pressure supplies of 0.67, 0.60, and 0.93 MPa and primary flow path pressures of 0.67, 0.76, and 0.93 MPa measured downstream of the Venturi throat, respectively. These diameters were within the threshold for acceptable response time in typical gas flows (≤ 1 μm). PIV experiments were conducted on the nozzle plume for all presented cases; mean axial and transverse velocities appeared as expected for the underexpanded jet structure, including the Mach disk and re-acceleration regions. Additional sizing analysis based on the particle response times across the normal shock again showed particle diameters to be well less than 1 μm for all cases. The results suggest that this method is an inexpensive and relatively simple solution to the problem of seeding nozzle plumes. The method will be used in testing of supersonic retropropulsion models in the Unitary Plan Wind Tunnel at The NASA Langley Research Center in 2022.

particle image velocimetry↗

Geologic Reservoir Content Model from Low-Temperature Geothermal Play Fairway Analysis for the Appalachian Basin

This dataset contains the known hydrocarbon reservoirs within the study area of the Geothermal Play Fairway Analysis for the Appalachian Basin (GPFA-AB) as part of Phase 1, Natural Reservoirs Quality Analysis. The final values for Reservoir Productivity Index (RPI) and uncertainty (in terms of coefficient of variation, CV) are included. RPI is in units of liters per MegaPascal-second (L/MPa-s), quantified using permeability, thickness of formation, and depth. A higher RPI is more optimal. Coefficient of Variation (CV) is the ratio of the standard deviation to the mean RPI for each reservoir. A lower CV is more optimal. Details on these metrics can be found in the Reservoirs_Methodology_Memo.pdf uploaded in the associated "Natural Reservoir Analysis" dataset linked below.

15 GEOTHERMAL ENERGY↗

Measurement and simulation of heat exchange in fractured bedrock using inert and thermally degrading tracers

Multicomponent groundwater tracer tests were conducted in a well-characterized field site in Altona, NY using inert carbon-cored nanoparticles and a thermally degrading phenolic compound. Experiments were conducted in a mesoscale reservoir consisting of a single subhorizontal bedding plane fracture located 7.6 m below ground surface contained between two wells separated by 14.1 m. The reservoir rock, initially at 11.78C, was heated using 748C water. During the heating process, a series of tracer tests using thermally degrading tracers were used to characterize the progressive in situ heating of the fracture. Fiber-Optic Distributed Temperature Sensing (FODTS) was used to measure temperature rise orthogonal to the fracture surface at 10 locations. Recovery of the thermally degrading tracer’s product was increased as the reservoir was progressively heated indicating that the advancement of the thermal front was proportional to the mass fraction of the thermally degrading tracer recovered. Both GPR imaging and FODTS measurements reveal that flow was reduced to a narrow channel which directly connected the two wells and led to rapid thermal breakthrough. Computational modeling of inert tracer and heat transport in a two-dimensional discrete fracture demonstrate that subsurface characterization using inert tracers alone could not uniquely characterize the Altona field site. However, the inclusion of a thermally degrading tracer may permit accurate subsurface temperature monitoring. At the Altona field site, however, fluid-rock interactions appear to have increased reaction rates relative to laboratory-based measurements made in the absence of rock surfaces.

58 GEOSCIENCES↗

SECARB-USA: Needs Assessment Framework for Storage Complexes (Task 2.1.b)

A team of SECARB storage experts examined 63 formations at 39 sites that were selected to represent the range of diversity of newly assessed, as well as well-advanced, storage prospects in the SECARB region. We inventoried the data needs triggered by the requirements to obtain a Class VI UIC storage permit, the data needs that results from the requirement to create geocellular fluid flow models to support that permit, and by pragmatic and best practice inputs such as public acceptance, regulatory readiness, and pore space leasing. We anchored both the needs inventory and the processes for and cost of meeting the needs with data from 9 sites in in the SECARB area that have advanced far in characterization. Results show that the total cost of characterization prior to obtaining a permit is convergent, because the permit and modeling requirements drive projects to obtain the same types of data for all cases. The high cost data that control cost are 1) drilling, coring, core-testing, logging, sampling and testing a characterization well and 2) collection of a 3-D seismic survey to map reservoir and confining system properties over the area of the plume or the area of elevated pressure. In 5 of our case study sites we determined that one or both of these costs could be avoided because the needs are met by available data.

54 ENVIRONMENTAL SCIENCES↗

Quantifying, characterizing, and controlling information flow in ultracold atomic gases

We study quantum information flow in a model comprised of a trapped impurity qubit immersed in a Bose-Einstein-condensed reservoir. We demonstrate how information flux between the qubit and the condensate can be manipulated by engineering the ultracold reservoir within experimentally realistic limits. We show that this system undergoes a transition from Markovian to non-Markovian dynamics, which can be controlled by changing key parameters such as the condensate scattering length. In this way, one can realize a quantum simulator of both Markovian and non-Markovian open quantum systems, the latter ones being characterized by a reverse flow of information from the background gas (reservoir) to the impurity (system).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of induced seismicity patterns derived from internal structure in event clusters

Microseismicity induced by CO 2 injection at Decatur, Illinois, occurs in distinct clusters and shows no obvious correlation with the proceeding pressure front. Here, we analyze some of these clusters in more depth by using a waveform cross-correlation approach. With this approach we can associate about 1400 events from two clusters, with moment magnitudes between 1.1 and -1.7, with specific formations of much smaller vertical dimensions (tens of meters) than the depth resolution of traveltime-based event locations. The differentiation of reservoir and basement events, and the definition of subclusters by waveform correlation, rather than by location, helps to better analyze the spatiotemporal evolution of the events within a cluster. In the Decatur case, this is characterized by event migration from the reservoir into the adjacent basement. The spatial variation of Brune stress drop and Gutenberg b value exhibits signs of a fluid-driven triggering mechanism at the cluster level, revealing a punctual hydraulic connection between reservoir and basement, most likely associated with basement faults cutting into the reservoir. The observed clustering of microseismicity can thus be explained by the lateral heterogeneity of permeability and crustal strength and is overall consistent with a pressure-induced triggering mechanism. Hence, proper long-term risk mitigation for large-scale fluid injection close to the basement requires prior mapping of small subseismic basement-connected faults.

58 GEOSCIENCES↗