Search NASA⌕ Search

SEARCH · Search NASA

Results for “SEDIMENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Characterization of shallow ocean sediments using the airborne electromagnetic method

Experimental airborne electromagnetic (AEM) survey data collected in Cape Cod Bay are used to derive continuous profiles of water depth, electrical depth, water conductivity, and bottom sediment conductivity. Through a few well-known empirical relationships, the conductivities are used, in turn, to derive density, porosity, sound speed, and acoustic reflectivity of the ocean bottom. A commercially available Dighem III AEM system was used for the survey without any significant modification. The helicopter-borne system operated at 385 and 7200 Hz; both were in a horizontal coplanar configuration. The interpreted profiles show good agreement with available ground truth data. Where no such data are available, the results appear to be very reasonable. Compared with the shipborne electrode array method, the AEM method can determine the necessary parameters at a much higher speed with a better lateral resolution over a wide range of water depths from 0 to perhaps 100 m. The bottom sediment conductivity that can be measured by the AEM method is closely related to physical properties of sediments, such as porosity, density, sound speed, and, indirectly, sediment types that might carry broad implications for various offshore activities.

Won, I. J.↗

Methane production from bicarbonate and acetate in an anoxic marine sediment

Methane production from C-14 labeled bicarbonate and acetate was measured over the top 28 cm of anoxic Cape Lookout Bight sediments during the summer of 1983. The depth distribution and magnitude of summed radioisotopically determined rates compare well with previous measurements of total methane production and the sediment-water methane flux. Methane production from CO2 reduction and acetate fermentation accounts for greater than 80 percent of the total production rate and sediment-water flux. Methane production from bicarbonate was found to occur in all depth intervals sampled except those in the top 2 cm, whereas significant methane production from acetate only occurred at depths below 10 cm where sulfate was exhausted. Acetate provided 20 to 29 percent of the measured methane production integrated over the top 30 cm of the sediments.

Crill, P. M.↗

Search for Martian fossil communities: Science strategies, sediment sites, and sample handling

The strategy for locating and sampling possible fossilized Martian organisms benefits from our experience with fossil microbial ecosystems on Earth. Evidence of early life is typically preserved as stromatolites in carbonates and cherts, and as microfossils in cherts, carbonates and shales. Stromatolites, which are laminated flat or domal structures built by microbial communities, are very likely the oldest and most widespread relics of early life. These communities flourished in supratidal to subtidal coastal benthic environments, wherever sunlight was available and where incoming sediments were insufficient to bury the communities before they became established. A logical site for such communities on Mars might be those areas in an ancient lake bed which were furthest from sediment input, but were still sufficiently shallow to have received sunlight. Therefore, although some sites within Valles Marineris might have contained ponded water, the possibly abundant sediment inputs might have overwhelmed stromatolite-like communities. Localized depressions which acted as catchment basins for ancient branched valley systems might be superior sites. Perhaps such depressions received drainage which, because of the relatively modest water discharges implied for these streams, was relatively low in transported sediment. Multiple streams converging on a single basin might have been able to maintain a shallow water environment for extended periods of time.

Desmarais, David J.↗

A preliminary evaluation of the airborne electromagnetic bathymetry system for characterization of coastal sediments and marsh soils

Airborne electromagnetic (AEM) data acquired over a coastal region of North Carolina as part of a prototype testing program is analyzed with emphasis on multiple transects crossing a variety of geomorphic/landscape types as a means of conducting a preliminary evaluation of the sensor's ability to determine water depth and characterize a number of water and sediment physical properties such as water conductivity, sediment conductivity, sediment porosity, and sediment density. The study site is described, along with the flight line mission plan and data acquisition and processing. Good agreement between AEM-measured bathymetry and ground truth is reported, and it is concluded that in the marine environment, this system can traverse areas more rapidly than ships with acoustic systems and can collect data from shallow or inaccessible regions.

Pelletier, R. E.↗

Experimental measurement of the orbital paths of particles sedimenting within a rotating viscous fluid as influenced by gravity

Measurements were taken of the path of a simulated typical tissue segment or 'particle' within a rotating fluid as a function of gravitational strength, fluid rotation rate, particle sedimentation rate, and particle initial position. Parameters were examined within the useful range for tissue culture in the NASA rotating wall culture vessels. The particle moves along a nearly circular path through the fluid (as observed from the rotating reference frame of the fluid) at the same speed as its linear terminal sedimentation speed for the external gravitational field. This gravitationally induced motion causes an increasing deviation of the particle from its original position within the fluid for a decreased rotational rate, for a more rapidly sedimenting particle, and for an increased gravitational strength. Under low gravity conditions (less than 0.1 G), the particle's motion through the fluid and its deviation from its original position become negligible. Under unit gravity conditions, large distortions (greater than 0.25 inch) occur even for particles of slow sedimentation rate (less than 1.0 cm/sec). The particle's motion is nearly independent of the particle's initial position. Comparison with mathematically predicted particle paths show that a significant error in the mathematically predicted path occurs for large particle deviations. This results from a geometric approximation and numerically accumulating error in the mathematical technique.

Wolf, David A.↗

Rn-222 tracing and stable isotope measurements of biogenic gas fluxes from methane saturated sediments

Transport of reduced biogenic gases from anoxic sediments and soils to the atmosphere can be quantitatively studied through measurement of radon-222/radium-226 disequilibrium. In previous work, seasonal variations in biogenic gas transport mechanisms, net fluxes and overall composition were documented. Now presented are direct field measurements of radon-222 activity in gases exiting organic rich sediments which show their usefulness for tracing of the stripping of dissolved biogenic gases from within the sediment column and transport via bubble ebullition. Methane is depleted in deuterium during the summer as compared with winter months and is in general lighter than in most marine sediments signaling the probable importance of acetate as an important precursor molecule. The significant seasonal isotopic variations observed illustrate the importance of understanding mechanisms and rates of biogenic gas production in order to interpret observed tropospheric isotopic data.

Martens, Christopher S.↗

Acetate concentrations and oxidation in salt marsh sediments

Acetate concentrations and rates of acetate oxidation and sulfate reduction were measured in S. alterniflora sediments in New Hampshire and Massachusetts. Pore water extracted from cores by squeezing or centrifugation contained in greater than 0.1 mM acetate and, in some instances, greater than 1.0 mM. Pore water sampled nondestructively contained much less acetate, often less than 0.01 mM. Acetate was associated with roots, and concentrations varied with changes in plant physiology. Acetate turnover was very low whether whole core or slurry incubations were used. Radiotracers injected directly into soils yielded rates of sulfate reduction and acetate oxidation not significantly different from core incubation techniques. Regardless of incubation method, acetate oxidation did not account for a substantial percentage of sulfate reduction. These results differ markedly from data for unvegetated coastal sediments where acetate levels are low, oxidation rate constants are high, and acetate oxication rates greatly exceed rates of sulfate reduction. The discrepancy between rates of acetate oxidation and sulfate reduction in these marsh soils may be due either to the utilization of substrates other than acetate by sulfate reducers or artifacts associated with measurements of organic utilization by rhizosphere bacteria. Care must be taken when interpreting data from salt marsh sediments since the release of material from roots during coring may affect the concentrations of certain compounds as well as influencing results obtained when sediment incubations are employed.

Source record↗

Factors that control the stable carbon isotopic composition of methane produced in an anoxic marine sediment

The carbon isotopic composition of methane produced in anoxic marine sediment is controlled by four factors: (1) the pathway of methane formation, (2) the isotopic composition of the methanogenic precursors, (3) the isotope fractionation factors for methane production, and (4) the isotope fractionation associated with methane oxidation. The importance of each factor was evaluated by monitoring stable carbon isotope ratios in methane produced by a sediment microcosm. Methane did not accumulate during the initial 42-day period when sediment contained sulfate, indicating little methane production from 'noncompetitive' substrates. Following sulfate depletion, methane accumulation proceeded in three distinct phases. First, CO2 reduction was the dominant methanogenic pathway and the isotopic composition of the methane produced ranged from -80 to -94 per thousand. The acetate concentration increased during this phase, suggesting that acetoclastic methanogenic bacteria were unable to keep pace with acetate production. Second, acetate fermentation became the dominant methanogenic pathway as bacteria responded to elevated acetate concentrations. The methane produced during this phase was progressively enriched in C-13, reaching a maximum delta(C-13) value of -42 per thousand. Third, the acetate pool experienced a precipitous decline from greater than 5 mM to less than 20 micro-M and methane production was again dominated by CO2 reduction. The delta(C-13) of methane produced during this final phase ranged from -46 to -58 per thousand. Methane oxidation concurrent with methane production was detected throughout the period of methane accumulation, at rates equivalent to 1 to 8 percent of the gross methane production rate. Thus methane oxidation was too slow to have significantly modified the isotopic signature of methane. A comparison of microcosm and field data suggests that similar microbial interactions may control seasonal variability in the isotopic composition of methane emitted from undisturbed Cape Lookout Bight sediment.

Alperin, M. J.↗

Iridium in sediments containing large abundances of Australasian microtektites from DSDP hole 758B in the Eastern Indian Ocean and from DSDP hole 769A in the Sulu Sea

Excess Ir found in sediments at the Cretaceous/Tertiary (K/T) boundary and in other (e.g., Pliocene) sediments from deep sea drilling cores is widely interpreted as evidence of major impact events. The Australasian tektites originated in an impact event approximately 0.77 Ma ago; microtektites have been found in deep-sea sediment cores from throughout the Indian Ocean, the Philippine Sea, and western Pacific Ocean, but Ir has not been previously reported in these horizons. The deep-sea record of tektites is of particular interest, because in contrast to most continental occurrences, the stratigraphy preserves the original depositional position. Recently several cores having exceptionally high contents of Australasian microtektites have been investigated, Glass and Wu found shocked quartz associated with the microtektites. We used neutron activation to determine concentrations of Ir and other elements in two cores bearing microtektites, one from Deep Sea Drilling Project (DSDP) hole 758B in the Eastern Indian Ocean and one from DSDP hole 769A in the Sulu Sea (near Mindanao, Philippines). The sedimentation age for the microtektite layers in core 758B lies between 0.73 - 0.78 Ma and agrees well with the mean laser-fusion Ar-40/Ar-39 age of Australasian tektites of 0.77 +/- 0.02 Ma by Izett et al. We are able to resolve a small positive Ir enhancement in 758B. Core 769A shows too much scatter to allow resolution of an Ir peak.

Schmidt, Gerhard↗

The anaerobic degradation of organic matter in Danish coastal sediments - Iron reduction, manganese reduction, and sulfate reduction

A combination of porewater and solid phase analysis as well as a series of sediment incubations are used to quantify organic carbon oxidation by dissimilatory Fe reduction, Mn reduction, and sulfate reduction, in sediments from the Skagerrak (located off the northeast coast of Jutland, Denmark). Solid phase data are integrated with incubation results to define the zones of the various oxidation processes. At S(9), surface Mn enrichments of up to 3.5 wt pct were found, and with such a ready source of Mn, dissimilatory Mn reduction was the only significant anaerobic process of carbon oxidation in the surface 10 cm of the sediment. At S(4) and S(6), active Mn reduction occurred; however, most of the Mn reduction may have resulted from the oxidation of acid volatile sulfides and Fe(2+) rather than by a dissimilatory sulfate. Dissolved Mn(2+) was found to completely adsorb onto sediment containing fully oxidized Mn oxides.

Canfield, Donald E.↗

Provenance of mineral phases in the Cretaceous-Tertiary boundary sediments exposed on the southern peninsula of Haiti

Acid-insoluble mineral residua of tektite-bearing Cretaceous-Tertiary boundary sediments in the Beloc Formation of Haiti contain abundant shocked quartz and lesser amounts of shocked plagioclase. The shocked quartz grains typically have 2 or 3 sets of planar deformation features, although grains with up to 15 sets were observed. The proportion of shocked quartz in the boundary sediments increases with stratigraphic height; at least 70 +/- 11% of the proportion of the quartz grains are shocked in the uppermost stratigraphic interval. The proportion of shocked quartz throughout the boundary sediments indicates that these grains were excavated primarily from crystalline silicate units, which may have been covered with a small amount of porous quartz-bearing sediments. Polyhedral and moderately sutured margins in shocked polycrystalline quartz grains, the size of the crystal units in these grains and the presence of shocked plagioclase, indicate these ejecta components were excavated from a target with continental affinites, containing quartzites or metaquartzites and a sialic metamorphic and/or igneous component. Other evidence suggests the target may also have contained a significant amount of calcium carbonate and/or sulfate. The large size and amount of shocked quartz grains deposited in Haiti indicate the crater from which they were excavated was produced in the proto-Caribbean region.

Kring, David A.↗

Analogies Between Colloidal Sedimentation and Turbulent Convection at High Prandtl Numbers

A new set of coarse-grained equations of motion is proposed to describe concentration and velocity fluctuations in a dilute sedimenting suspension of non-Brownian particles. With these equations, colloidal sedimentation is found to be analogous to turbulent convection at high Prandtl numbers. Using Kraichnan's mixing-length theory, we obtain scaling relations for the diffusive dissipation length delta(sub theta), the velocity variance delta u, and the concentration variance delta phi. The obtained scaling laws over varying particle radius alpha and volume fraction phi(sub ) are in excellent agreement with the recent experiment by Segre, Herbolzheimer, and Chaikin. The analogy between colloidal sedimentation and turbulent convection gives a simple interpretation for the existence of a velocity cut-off length, which prevents hydrodynamic dispersion coefficients from being divergent. It also provides a coherent framework for the study of sedimentation dynamics in different colloidal systems.

Tong, P.↗

Initial Results on the Extraterrestrial Component of New Sediment Cores Containing Deposits of the Eltanin Impact Event

Background: The impact of the Eltanin asteroid into the Bellingshausen Sea (2.15 Ma) is the only known impact in a deep-ocean (approx. 5 km) basin. In 1995, Polarstern expedition ANT XII/4 made the first geological survey of the suspected impact region. Three sediment cores sampled around the San Martin seamounts (approx. 57.5 S, 91 W) contained well-preserved impact deposits. Sediments of Eocene age and younger were ripped up and redeposited by the impact. The depositional sequence produced by the impact has three units: a chaotic assemblage of sediment fragments up to 50 cm, followed by laminated sands deposited as a turbulent flow, and finally silts and clays that accumulated from dispersed sediments in the water column. The meteoritic impact ejecta, which is composed of shock-melted asteroidal materials and unmelted meteorites, settled through the water column and concentrated near the top of the laminated sands.

Kyte, Frank T.↗

Initial Results on the Meteoritic Component of new Sediment Cores Containing Deposits of the Eltanin Impact Event

The late Pliocene impact of the Eltanin asteroid is the only known asteroid impact in a deep- ocean (-5 km) basin . This was first discovered in 1981 as an Ir anomaly in sediment cores collected by the USNS Eltanin in 1965. In 1995, Polarstern expedition ANT XII/4 made the first geological survey of the suspected impact region. Three sediment cores sampled around the San Martin seamounts (approx. 57.5 S, 91 W) contained well-preserved impact deposits that include disturbed ocean sediments and meteoritic impact ejecta. The latter is composed of shock-melted asteroidal materials and unmelted meteorites. In 2001, the FS Polarstern returned to the impact area during expedition ANT XVIIU5a. At least 16 cores were recovered that contain ejecta deposits. These cores and geophysical data from the expedition can be used to map the effects of the impact over a region of about 80,000 square km. To date we have measured Ir concentrations in sediments from seven of the new cores and preliminary data should be available for a few more by the time of the meeting. Our initial interpretation of these data is that there is a region in the vicinity of the San Martin Seamounts comprising at least 20,000 square km in which the average amount of meteoritic material deposited was more than 1 g per square cm. This alone is enough material to support a 500 m asteroid. Beyond this is a region of about 60,000 square km, mostly to the north and west, where the amount of ejecta probably averages about 0.2 g per square cm. Another 400 km to the east, USNS Eltanin core E10-2 has about 0.05 g per square cm, so we know that ejecta probably occurs across more than a million square km of ocean floor. A key to future exploration of this impact is to find evidence of the ejecta at more sites distant from the seamounts. We currently have almost no data from regions to the west or south of the San Martin seamounts.

Kyte, Frank T.↗

Organic geochemistry of sediments from the continental margin off southern New England, U.S.A.--Part II. Lipids

Organic geochemical measurements of the lipid fraction, comparing saturated and aromatic hydrocarbons, fatty acids, alcohols and sterols, have been carried out on six sediments cores collected from the Atlantic shelf, slope and the rise areas to evaluate the cross-shelf transport of the organic carbon. The concentration of most of the organic compound classes studied is correlated with the total organic carbon, which decreases from the shelf through slope to the rise. Terrigenous carbon is recognizable even in the slope and rise sediments, but terrestrial influx decreases relative to marine generated lipids in the slope and rise organic matter. We estimate that approximately 50% of the shelf organic matter is exported to the slope. Data of sediment trap material collected at 1200 m from 1250 m water depth are discussed and compared with that of surface sediment from 1280 m water depth (slope). Fluxes for specific organic compound classes have been computed. The fluxes are of the same magnitude as for equatorial North Atlantic trap particulates at comparable water depth, studied by other investigations.

NASA Discipline Exobiology↗

Caulonemal gravitropism and amyloplast sedimentation in the moss Funaria

Caulonemata of the moss Funaria were examined to determine whether they are gravitropic. Funaria and Physcomitrella were also evaluated to compare amyloplast sedimentation with that of Ceratodon. Protonemata were either chemically fixed in place or examined alive using infrared timelapse videomicroscopy. Funaria caulonemata were found to be negatively gravitropic, i.e., they grew upwards in the dark. Upward curvature reversed temporarily before cytokinesis in Funaria, a phenomenon already known for Ceratodon and Physcomitrella. Most horizontal and upward-curving Funaria tip cells contained a broad subapical zone where plastid sedimentation occurred. In dark-grown Physcomitrella caulonemata, sedimentation was detected by the presence of a thin, amyloplast-free strip of cytoplasm at the top of the cell. These results suggest that gravitropism and subapical amyloplast sedimentation may be relatively common in moss caulonemata.

Non-NASA Center↗

Sulfate reduction in deep-sea sediments

Sulfate reduction rates calculated from about 200 DSDP pore water sulfate profiles have been contoured and plotted on a map covering most areas of the world ocean. Rates show a remarkable spatial consistency, with high rates observed near the continental margins, becoming progressively lower toward the central ocean basins. Relatively elevated rates are also found in the eastern equatorial Pacific, a site of upwelling and correspondingly high rates of primary organic production. Overall, the distribution of sulfate reduction in pelagic sediments looks very similar to the distribution of primary organic carbon production. When rates are directly compared, however, the correlation between sulfate reduction and primary production is only moderately strong. Perhaps the most important influence on sulfate reduction is sediment deposition rate and the control this has over the fraction of the sedimentary organic carbon flux that becomes available for sulfate reduction. The slower the rate of sediment deposition the more time for oxic respiration and the less organic carbon that escapes to the zone of sulfate reduction. To predict most accurately sulfate reduction rates, however, the variables of primary production, water depth, and sediment deposition rate must all be integrated.

NASA Program Exobiology↗

Amyloplast sedimentation dynamics in maize columella cells support a new model for the gravity-sensing apparatus of roots

Quantitative analysis of statolith sedimentation behavior was accomplished using videomicroscopy of living columella cells of corn (Zea mays) roots, which displayed no systematic cytoplasmic streaming. Following 90 degrees rotation of the root, the statoliths moved downward along the distal wall and then spread out along the bottom with an average velocity of 1.7 microm min(-1). When statolith trajectories traversed the complete width or length of the cell, they initially moved horizontally toward channel-initiation sites and then moved vertically through the channels to the lower side of the reoriented cell where they again dispersed. These statoliths exhibited a significantly lower average velocity than those sedimenting on distal-to-side trajectories. In addition, although statoliths undergoing distal-to-side sedimentation began at their highest velocity and slowed monotonically as they approached the lower cell membrane, statoliths crossing the cell's central region remained slow initially and accelerated to maximum speed once they reached a channel. The statoliths accelerated sooner, and the channeling effect was less pronounced in roots treated with cytochalasin D. Parallel ultrastructural studies of high-pressure frozen-freeze-substituted columella cells suggest that the low-resistance statolith pathway in the cell periphery corresponds to the sharp interface between the endoplasmic reticulum (ER)-rich cortical and the ER-devoid central region of these cells. The central region is also shown to contain an actin-based cytoskeletal network in which the individual, straight, actin-like filaments are randomly distributed. To explain these findings as well as the results of physical simulation experiments, we have formulated a new, tensegrity-based model of gravity sensing in columella cells. This model envisages the cytoplasm as pervaded by an actin-based cytoskeletal network that is denser in the ER-devoid central region than in the ER-rich cell cortex and is linked to stretch receptors in the plasma membrane. Sedimenting statoliths are postulated to produce a directional signal by locally disrupting the network and thereby altering the balance of forces acting on the receptors in different plasma membrane regions.

NASA Program Fundamental Space Biology↗