Search NASA⌕ Search

SEARCH · Search NASA

Results for “SLAC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Low-energy calibration of SuperCDMS HVeV cryogenic silicon calorimeters using Compton steps

Cryogenic calorimeters for low-mass dark matter searches have achieved sub-eV energy resolutions, driving advances in both low-energy calibration techniques and our understanding of detector physics. The energy deposition spectrum of gamma rays scattering off target materials exhibits step-like features, known as Compton steps, near the binding energies of atomic electrons. Here, we demonstrate a successful use of Compton steps for sub-keV calibration of cryogenic silicon calorimeters, utilizing four SuperCDMS High-Voltage eV-resolution detectors operated with 0 V bias across the crystal. This new calibration at 0 V is compared with the established high-voltage calibration using optical photons. The comparison indicates that the detector response at 0 V is about 30% weaker than expected, highlighting challenges in detector response modeling for low-mass dark matter searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Light dark matter constraints from SuperCDMS HVeV detectors operated underground with an anticoincidence event selection

This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g−days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/𝑐 2 , as well as upper limits on dark photon kinetic mixing and axionlike particle axioelectric coupling for masses between 1.2 and 23.3 eV/𝑐 2 . Compared to an earlier HVeV search, sensitivity was improved as a result of an increased overburden of 225 meters of water equivalent, an anticoincidence event selection, and better pile-up rejection. In the case of dark-matter-electron scattering via a heavy mediator, an improvement by up to a factor of 25 in cross section sensitivity was achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Flow-dependent tagging of $^{214}$Pb decays in the LZ dark matter detector

The LUX-ZEPLIN (LZ) experiment is searching for dark matter interactions in a liquid xenon time projection chamber (LXe-TPC). This article demonstrates how control of the flow state in the LXe-TPC enables the identification of pairs of sequential alpha-decays, which are used to map fluid flow and ion drift in the liquid target. The resulting transport model is used to tag $^{214}$Pb beta-decays, a leading background to dark matter signals in LZ. Temporally evolving volume selections, at a cost of 9.0% of exposure, target the decay of each $^{214}$Pb atom up to 81 minutes after production, resulting in (63 $\pm$ 6$_{\mathrm{stat}}$ $\pm$ 7$_{\mathrm{sys}}$)% identification of $^{214}$Pb decays to ground state. We also demonstrate how flow-based tagging techniques enable a novel calibration side band that is concurrent with science data.

Aalbers, J. [SLAC; Stanford U., Phys. Dept.; KIPAC↗
DOE OSTI2025

Low-energy nuclear recoil calibration of the LUX-ZEPLIN experiment with a photoneutron source

The LZ experiment is a liquid xenon time-projection chamber (TPC) searching for evidence of particle dark matter interactions. In the simplest assumption of elastic scattering, many dark matter models predict an energy spectrum which rises quasi-exponentially with decreasing energy transfer to a target atom. LZ expects to detect coherent neutrino-nucleus scattering of $^{8}$B solar neutrinos, the signal from which is very similar to a dark matter particle with mass of about 5.5 GeV/$c^{2}$, which result in typical nuclear recoil energies of $<$5 keV$_{\text{nr}}$. Therefore, it is of crucial importance to calibrate the response of recoiling xenon nuclei to keV-energy recoils. This analysis details the first in situ photoneutron calibration of the LZ detector and probes its response in this energy regime.

Aalbers, J. [SLAC; Stanford U., Phys. Dept.; KIPAC↗
DOE OSTI2025

Lens Model Accuracy in the Expected LSST Lensed AGN Sample

Strong gravitational lensing of active galactic nuclei (AGN) enables measurements of cosmological parameters through time-delay cosmography (TDC). With data from the upcoming LSST survey, we anticipate using a sample of O(1000) lensed AGN for TDC. To prepare for this dataset and enable this measurement, we construct and analyze a realistic mock sample of 1300 systems drawn from the OM10 (Oguri & Marshall 2010) catalog of simulated lenses with AGN sources at $z<3.1$ in order to test a key aspect of the analysis pipeline, that of the lens modeling. We realize the lenses as power law elliptical mass distributions and simulate 5-year LSST i-band coadd images. From every image, we infer the lens mass model parameters using neural posterior estimation (NPE). Focusing on the key model parameters, $θ_E$ (the Einstein Radius) and $γ_{lens}$ (the projected mass density profile slope), with consistent mass-light ellipticity correlations in test and training data, we recover $θ_E$ with less than 1% bias per lens, 6.5% precision per lens and $γ_{lens}$ with less than 3% bias per lens, 8% precision per lens. We find that lens light subtraction prior to modeling is only useful when applied to data sampled from the training prior. If emulated deconvolution is applied to the data prior to modeling, precision improves across all parameters by a factor of 2. Finally, we combine the inferred lens mass models using Bayesian Hierarchical Inference to recover the global properties of the lens sample with less than 1% bias.

Venkatraman, Padmavathi [Illinois U., Urbana; KIPA↗
DOE OSTI2026

Calibration and Performance of Germanium High Voltage Detectors for SuperCDMS SNOLAB

As SuperCDMS SNOLAB is getting ready to search for low mass dark matter particles, using cryogenic Ge and Si detectors, a set of six of the new SuperCDMS High Voltage (HV) detectors (four Ge and two Si) were tested in the Cryogenic Underground TEst facility (CUTE) at SNOLAB. This provided the first opportunity to gain experience with this new detector type and assess their performance thoroughly under low background conditions. Here we describe the SuperCDMS HV detector concept and discuss some of the newly developed analysis methods and approaches. Focusing on the Ge detectors, we investigate the detector performance under voltage bias (up to 90 V), exercise the low energy (keV to sub-keV range) calibration based on the electron capture peaks generated by the decay of $^{71}$Ge, assess the detector resolution, and demonstrate the unexpected (and encouraging) ability of these detectors to also measure high energy interactions in the hundreds of keV range with good resolution (better than 3% at 356 keV).

Albakry, M. F. [British Columbia U.; TRIUMF]↗
DOE OSTI2025

Coexisting Phases in NaNbO 3 Thin Films Influenced by Epitaxial Strain and Size Effects

Coherently strained NaNbO 3 thin films are synthesized across a range of thicknesses, enabling the study of size effects under epitaxial strain in antiferroelectric thin films without relaxation. Competing antiferroelectric‐ferroelectric phases are observed, leading to the stabilization of phase coexistence, multistate switching with strong retention and fatigue performance, and potential avenues to boost energy storage properties.

antiferroelectrics↗
DOE OSTI2025

Crossing the Oxo‐Peroxo Wall for Selective Electrochemical Epoxidation

Electrochemical oxidation in water requires the formation of reactive oxygen species to be able to oxidize unsaturated hydrocarbons to epoxides, aldehydes, and ketones. These reactions, broadly classified as alternative oxidation reactions (AOR), directly compete with the prevalent oxygen evolution reaction (OER). In molecular catalysis, the Oxo-Wall dictates a transition from a stable oxo intermediate (OER active) to a meta-stable metal-oxo (OER inactive) generally occurs. In this work on heterogeneous catalysis, the same Oxo-Wall applies, however, a meta-stable oxo preferentially coordinates with lattice oxygen to form a more stable surface peroxo intermediate. A universal free energy onset of this process is identified at 3.39 eV under electrochemical activation in water and show that it is completely decoupled from the OER oxo species. Such decoupling gives rise to a new region of oxygen reactivity relevant for AOR where a selective oxidation of the unsaturated C-C bonds is predicted to occur instead of OER. A distinct AOR overpotential volcano is constructed and identify recently reported electrocatalysts, including palladium-platinum for propylene epoxidation and silver-nickel for ethylene epoxidation, along with others such as TiO 2 and CuO. Broader implications and limitations of electrochemical AOR are discussed, highlighting their potential to enable electrochemically enhanced thermal catalysis.

Electrocatalysis↗
DOE OSTI2025

Transient Terahertz Oscillations During Photoinduced Polarization Topology Reconfiguration in Ferroelectric Superlattices

Terahertz resonances embedded in crystalline heterostructures could close a spectral gap between conventional electronics and photonics while opening new windows on non-equilibrium lattice dynamics. We show that femtosecond optical screening of the depolarization field in epitaxial PbTiO3/SrTiO3 superlattices launches a collective polar mode that oscillates near 1 THz and coherently spans the entire mini-Brillouin zone. Wave-vector-resolved pump–probe X-ray diffraction resolves a nearly dispersion-less oscillation at 0.87 THz and 0.94 THz at the zone boundary and zone center, respectively, persisting for ~2.5 ps, corresponding to a weakly damped resonance. Dynamical phase-field simulations reveal the origin of the mode to mesoscopic rotation of closure-domain textures during the photo-excited transition from an unscreened to a screened electrostatic state. Varying the PbTiO3 and SrTiO3 ratio tunes the mode frequency continuously from 0.9 to 1.4 THz, providing a quantitative design rule for frequency-selectable THz oscillators in ferroelectric heterostructures. By coupling nanoscale polarization reconfiguration to long-wavelength coherent dynamics, this work establishes depolarization-field engineering to topology-driven THz functionality and expanding the landscape of collective lattice dynamics.

Sri Gyan, Deepankar [Univ. of Wisconsin, Madison, ↗
DOE OSTI2025

Real-time tracking and analysis of gas bubble dynamics in laser powder bed fusion using in-situ X-ray characterization and machine learning

Porosity defects remain a significant challenge in the laser powder bed fusion (LPBF) process, adversely affecting the mechanical properties and reliability of additively manufactured components. Here, this study investigates the real-time formation and trajectory of gas bubbles during LPBF of Al6061 alloy using advanced in-situ X-ray characterization and machine learning. The unsupervised Gaussian mixture model and particle tracking algorithm developed are able to precisely track and quantify the properties of gas bubbles and keyhole pores. Our analysis identified five distinct types of gas bubble formation and movement patterns, emphasizing the diverse origins and behaviors of these defects. It enables precise quantification of trajectories, velocities, and morphological changes of gas bubbles, offering a granular view of the subsurface dynamics within the melt pool. Additionally, we explored keyhole-induced pore dynamics, revealing the critical role of keyhole oscillation and collapse for the formation of both large and small gas pores. It defines four different regions of gas bubble movement within the melt pool, providing a clearer understanding of how local fluid dynamics affect pore behavior. The results underscore the importance of integrating in-situ experimental observation and automated machine learning to develop a more robust predictive model for defect formation in LPBF.

In-situ X-ray imaging↗
DOE OSTI2026

Metal oxide-promoted calcium cuprate catalysts for diol oxidative dehydrocyclization to lactones

Here, this work investigates structure-function relationships in electronically tunable, redox-active, basic Cu-Ca mixed metal oxide catalysts for oxidative dehydrocyclization of liquid diols to lactones. Compositional screening identified Ni 2+ and Zn 2+ as effective promoters that increase the surface Cu 2+ population by ∼1.7× and Cu-normalized activity for liquid 1,4-butanediol conversion to γ-butyrolactone by ∼3–4×. In situ Raman spectroscopy, in situ X-ray absorption spectroscopy (XAS), in situ diffuse-reflectance Fourier transform infrared spectroscopy (DRIFTS), ex situ X-ray diffraction (XRD), and H 2 -temperature-programmed reduction (H 2 -TPR) show that Ni 2+ or Zn 2+ incorporation promotes the formation of Ca 0.82 Cu 1.00 O 2 nanoparticles under mild calcination conditions. This cuprate phase features stronger and shorter Cu–O bonds (1.90 Å) than inactive bulk CuO (1.95 Å) and square-planar Cu 2+ O 4 sites with enhanced d z2 electrophilicity, strengthening alkoxy adsorption. Pyridine-DRIFTS confirms the purely basic nature of the catalyst surface, while methanol-DRIFTS indicates Cu 2+ surface enrichment with Ni or Zn promotion, where Cu–O(Ca)–Cu sites can exist as amorphous domains or a truncation layer on crystalline nanoparticles.

09 BIOMASS FUELS↗
DOE OSTI2024

A decade of insights: Delving into calendar aging trends and implications

Lithium-ion batteries remain at rest for extended periods and experience calendar aging. Although lithium-ion batteries are expected to perform for over 10 years at room temperature, long-term calendar aging data are seldom reported over such timescales. We present a dataset from 232 commercial cells across eight cell types and five manufacturers that underwent calendar aging across various temperatures and states of charge (SOCs) for up to 13 years. We analyze calendar aging across these conditions by tracking capacity loss and resistance growth as the cells degrade. This dataset is used to validate simple models, primarily the Arrhenius law and the power law, which explain the temperature and storage time on calendar aging. Certain applications of Arrhenius and power law fail to describe the dependence of capacity loss on temperature and resistance growth on storage time. Through this dataset, we demonstrate the complexity of calendar aging and the challenges in reducing trends into phenomenological models.

25 ENERGY STORAGE↗
DOE OSTI2025

Phase segregation dynamics in mixed-halide perovskites revealed by plunge-freeze cryo-electron microscopy

Mixed-halide lead perovskites, with photoexcited charge-carrier properties suitable for high-efficiency photovoltaics, hold significant promise for high-efficiency tandem solar cells. However, phase segregation under illumination, where an iodide-rich phase forms carrier trap states, remains a barrier to application. This study employs plunge-freeze cryoelectron microscopy to visualize nanoscale phase segregation dynamics in CsPb(Br x I 1–x ) 3 films. By rapidly freezing the illuminated samples, we preserve transient photoexcited ion distributions for high-resolution structural and compositional analysis at the nanoscale. Cryogenic scanning transmission electron microscopy (STEM) techniques (electron energy loss spectroscopy [EELS] and 4D-STEM) captured the dynamics of photo-induced iodine migration from grain boundaries to centers, identified the buildup of anisotropic strain, and captured the heterogeneous evolution of this process within a single grain. These findings provide insight into microscopic phase segregation mechanisms and their dynamics, enhancing our understanding of mixed-halide perovskite photostability.

42 ENGINEERING↗
DOE OSTI2025

From Micro-environments to Macroscopic Effects: How the Alkaline Hydrogen Evolution Reaction Drives Cu Cathodic Corrosion

Cathodic corrosion of copper (Cu) has posed a significant challenge for over a century, impeding various technological progresses such as electrochemical conversion of CO 2 (eCO 2 RR) into fuels and other value-added carbon products. Here, in this study, employing a combined Density Functional Theory (DFT) and kinetic Monte Carlo (kMC) simulation approach, we delve into the atomistic level mechanism driving this phenomenon in Cu. Our hypothesis posits the pivotal role of alkaline hydrogen evolution reaction (HER) in facilitating cathodic corrosion in Cu. We rigorously develop a pH-dependent hydroxide (OH) adsorption mechanism and calculate the equilibrium OH coverage (𝜃 OH ) at varying pH levels, the thermodynamic stability of subsurface oxygen (O sub ), as well as the Cu-vacancy mediated diffusion of subsurface oxygens (O sub ). Through comprehensive analysis, we establish correlation among various microenvironments, including oxygen diffusion in subsurface layers, pH-dependent OH adsorption, and Cu dissolution into the electrolyte as (Cu-OH) complexes. Furthermore, our investigation explores the correlation between surface coordination environment of active sites and cathodic corrosion of Cu. Finally, by integrating DFT-derived thermodynamic data into a kMC model, we successfully predict the formation of experimentally observed corrosion pits on Cu-surfaces. This combined approach not only advances our fundamental understanding of Cu cathodic corrosion but also offers insights crucial for developing effective corrosion mitigation strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dynamic Features of Cu-Ceria Interface under CO 2 Hydrogenation to Methanol

It is generally accepted that metal–support interaction is very important for the hydrogenation of CO 2 to methanol, but little has been revealed about the feature of interfacial active sites under real reaction conditions since there are only limited techniques that can be applied under high-pressure conditions. Here, in this work, by combining multiple in situ and operando techniques on a model Cu/ceria catalyst, we have tracked Cu and ceria sites for methanol formation. Under the reaction condition, it is found that upon reaching the reaction temperature, oxidized Cu species in the as-synthesized catalyst immediately change into metallic Cu species. Following this, it is the gradual formation of methanol, the changing rate of which coincides with the formation of a unique Ce 3+ species. The combined experimental results and density functional theory (DFT) calculations have determined that the formed Ce 3+ sites driven by the reaction conditions are bound to hydrides, adsorbed carbonate species, and interfacial active Cu sites. The Cu-ceria interaction in this complex moiety is weak and can be easily disturbed with reaction environment variations, leading to dynamic changes at the interface upon the hydrogenation of active carbonate intermediates, which are precursors for the formation of methanol. The formation of this unique Cu–Ce 3+ interface and its dynamicity lead to an increase of methanol selectivity from less than 20% to 60%. These results suggest that reactant-derived species (H – and carbonate in this work) can be essential components of the active center with the functions of manipulating the metal−oxide interaction and directing reaction pathways.

CO2 hydrogenation to methanol↗
DOE OSTI2026

Quantifying the Impact of Metal Population Distribution in MFI-Supported Mo Catalysts for Methane Dehydroaromatization

Precise evaluation of intrinsic kinetic behavior in Mo/MFI catalysts for methane dehydroaromatization (MDA) is confounded by variations in Mo dispersion and speciation, which are influenced by metal loading and zeolite acidity. This work advances the utility of H 2 -temperature programmed reduction (H 2 -TPR) for characterizing Mo/MFI catalysts by enabling quantitative comparison of MoO x populations distinguished by reduction behavior and linked to initial catalytic performance. A comprehensive H 2 reduction pathway is established through systematic H 2 - TPR studies varying catalyst composition (1–10 wt % Mo, Si/Al = 15, 40, ∞), supplemented by UV-Raman spectroscopy, X-ray powder diffraction, N 2 physisorption, NH 3 -TPD, and advanced spectroscopic analysis (in situ XAS with principal component analysis/multivariate curve resolution—alternating least squares). Two low-temperature H 2 -TPR regions capture distinct Mo populations undergoing initial Mo(VI)→Mo(IV) reduction: a lower-temperature population (Mo-RI) associated primarily with highly dispersed, anchored MoO x species expected to predominantly reside within MFI channels, and a higher-temperature population (Mo-RII) corresponding to a broader set of MoO x species that becomes increasingly bulk-like/extrazeolitic at higher Mo loading. Quantification of these populations provides practical, kinetically relevant descriptors for comparing initial MDA rates across catalysts with varying Mo loading, Si/Al ratio, and MoO x heterogeneity. Application of lower-temperature Mo-RI estimates to kinetic measurements reveals a minimum threshold of ∼0.12 × 10 –3 mol Mo-RI/g cat , above which initial forward benzene rates normalized to this population converge despite differences in metal loading and zeolite Brønsted acidity. This threshold coincides with a transition toward a common C 2 -mediated benzene-forming regime, as indicated by approach-to-equilibrium analysis of methane-to-ethane, ethane-to-ethylene, and ethylene-to-benzene reaction steps. Above this threshold, normalized initial benzene rates are nearly invariant with increasing Mo-RII/Mo-RI population ratio, indicating that excess Mo-RII populations, including bulk-like/extrazeolitic MoO x domains present at higher loading, do not measurably suppress benzene formation associated with anchored and mostly channel-confined Mo population under the initial-rate conditions examined.

Mo/MFI↗
DOE OSTI2026

Pressure-Induced Metal-like Transport and Magnetoresistance in a Au 2+ –Au 3+ Halide Perovskite

The Cs 4 Au II Au III 2 Cl 12 perovskite (1), featuring AuCl 4 trimers separated by vacancies, enables the first high-pressure study of Au 2+/3+ mixed-valence. Our computational analysis of the gold frontier orbitals suggests that the Au 2+ →Au 3+ intervalence charge transfer (IVCT) occurs across the vacancies. Computational structures indicate that these vacancies rapidly shrink with pressure and the Au 2+ and Au 3+ coordination spheres become very similar at the phase transition to nearly cubic symmetry at ca. 15 GPa─enabling facile IVCT. Although the activation energy of conductivity of 0.73(4) meV and far-infrared absorption indicate a small but nonzero bandgap, ambient thermal energy drives the IVCT, affording metallic properties: prominent infrared reflectivity and transport values of 10 2 S·cm –1 . This prompted us to perform the first high-pressure studies of magnetoresistance (MR) and Hall effect in halide perovskites. At 16 GPa, the MR increases by 9.3% at 2 K and 9 T; this value is maintained up to 27 GPa, when a local distortion drives electronic localization. By globally fitting the MR and Hall resistance to a two-carrier model we quantify how the carrier densities and mobilities evolve with pressure. Thus, metal-like transport and MR in 1 is driven by a pressure-induced transition from localized to partially delocalized mixed-valence.

Deschene, Christina R. [Stanford University, CA (U↗
DOE OSTI2026

Conductivity-Driven Origin of the Limiting Current in Concentrated Electrolytes

Next-generation electrolyte materials are hindered by their ability to support high currents essential for fast-charge and high-power battery applications. The maximum current supported by an electrolyte, the limiting current, is dictated by the formation of concentration gradients across the electrolyte under an electric field. Most of the literature attributes the onset of the limiting current in concentrated electrolytes to the salt concentration at the positive electrode approaching the solubility limit. Here, in this study, we leverage operando X-ray transmission imaging to measure spatiotemporal salt concentration profiles of a polymer electrolyte in a lithium–indium symmetric cell at a current exceeding the limiting current. The measurement of concentration profiles enables mapping the spatiotemporal electric potential, which comprises an ohmic contribution, governed by conductivity, and an overpotential related to maintaining concentration gradients. We find that a precipitous drop in conductivity at the positive electrode drives the divergence of electric potential, rather than a thermodynamic solubility limit.

Abdo, Emily E. [University of California, Berkeley↗