Periodic Atomic Displacements and Visualization of the Electron-Lattice Interaction in the Cuprate
Not Available
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
SEARCH · Search NASA
Results for “Scanning microscopy”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Diagnosis of PV Cell Passivation Degradation Resulting from Hot-Humid, High Voltage Potential Aging
Corrosion of the antireflective coating on the cell ("AR c corrosion") was previously observed in studies using hot-humid test conditions with external high voltage (HV) bias. Because AR c corrosion is not well understood, mini-modules (MiMos) were examined in a comparative experiment using PERC and PERT as well as legacy Al-BSF cells. For separate MiMos with the cell circuit electrical at +1500 V, -1500 V, or unbiased "V oc", test conditions in the comparative study included 60degrees C/60% RH for 96 h, as in IEC TS 62804-1; 70degrees C/70%RH for 200 h; and 85degrees C/85% RH for 200 h. Characterizations at each read point included: camera and electroluminescence (EL) imaging, colorimetry, and I-V curve tracing. Characterizations at the final read point included: SunsVoc; spatially mapping external quantum efficiency (EQE); high resolution: photoluminescence (PL), EL, and dark lock-in thermographic (DLIT) imaging. Forensics were performed on extracted cores, including scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) and scanning Auger microscopy (SAM). Forensics were also conducted on MiMos (stepped HV aging) and full-sized modules (outdoor aging) from previous studies. AR c corrosion was specifically observed for the glass/encapsulant/cell side of +1500 V (HV+) stressed MiMos, where appearance, color, and reflectance were the characteristics most distinguished relative to simultaneously occurring degradation modes. SEM/EDS and SAM identified conversion of silicon nitride to silicon oxide or hydrous silica, preferentially occurring at the edges and tips of the pyramidal textured cell surface.
aging↗
Spectra-Orthogonal Optical Anisotropy in Wafer-Scale Molecular Crystal Monolayers
Controlling the spectral and polarization response of two-dimensional (2D) crystals is vital for developing ultrathin platforms for compact optoelectronic devices. However, independently tuning optical anisotropy and spectral response remains challenging in conventional semiconductors due to the intertwined nature of their lattice and electronic structures. Here, we report spectra-orthogonal optical anisotropy─where polarization anisotropy is tuned independently of spectral response─in wafer-scale, one-atom-thick 2D molecular crystal (2DMC) monolayers synthesized on monolayer transition-metal dichalcogenide (TMD) crystals. Utilizing the concomitant spectral consistency and structural tunability of perylene derivatives, we demonstrate tunable optical polarization anisotropy in 2DMCs with similar spectral profiles, as confirmed by room-temperature scanning tunneling microscopy and cross-polarized reflectance microscopy. Additional angle-dependent analysis of the single-crystal and polycrystalline molecular domains reveals an epitaxial relationship between the 2DMC and TMD. In conclusion, our results establish a scalable, molecule-based 2D crystalline platform for unique and tunable functionalities unattainable in covalent 2D solids.
2D materials↗
van der Waals Epitaxy Growth of Bi 2 Se 3 on a Freestanding Monolayer Graphene Membrane: Implications for Layered Materials and Heterostructures
Research on two-dimensional and layered materials has expanded over the past 2 decades because of their unique properties and application potential. The key hurdles in realizing this potential are the challenges in controlling their atomic structure and their incompatibility with existing semiconductor nanofabrication techniques. Here we report on high-quality van der Waals epitaxial growth and characterization of a layered topological insulator on freestanding monolayer graphene transferred to different mechanical supports. This “templated” synthesis approach enables direct interrogation of the interfacial atomic structure of the as-grown materials and opens a route toward creating device structures with more traditional semiconductor nanofabrication techniques.
36 MATERIALS SCIENCE↗
Probing phonon softening in ferroelectrics by scanning probe microwave spectroscopy
Microwave measurements have recently been successfully applied to measure ferroelectric materials on the nanoscale, including detection of polarization switching and ferroelectric domain walls. In this study we discuss the question of whether scanning probe microscopy operating at microwave frequency can identify the changes associated with the soft phonon dynamics in a ferroic. The analytical expressions for the electric potential, complex impedance, and dielectric losses are derived and analyzed, since these physical quantities are linked to experimentally measurable properties of the ferroic. As a ferroic we consider virtual or proper ferroelectric with an optic phonon mode that softens at a Curie point. We also consider a decay mechanism linked to the conductance of the ferroic, thus manifesting itself as the dielectric loss in the material. Our key finding is that the influence of the soft phonon dispersion on the surface potential distribution, complex impedance, and dielectric losses are evidently strong in the vicinity (~10–30 K) of the Curie temperature. Additionally, we quantified how the spatial distribution and frequency spectra of the complex impedance and the dielectric losses react on the dynamics of the soft phonons near the Curie point. These results set the stage for characterization of polar phase transitions with nanoscale microwave measurements, providing a complementary approach to well established electromechanical measurements for fundamental understanding of ferroelectric properties as well as their applications in telecommunication and computing.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Semi-adsorption-controlled growth window for half-Heusler FeVSb epitaxial films
The electronic, magnetic, thermoelectric, and topological properties of Heusler compounds (composition XYZ or X 2 YZ) are highly sensitive to stoichiometry and defects. Here we establish the existence and experimentally map the bounds of a semi-adsorption-controlled growth window for semiconducting half-Heusler FeVSb films, grown by molecular beam epitaxy (MBE). We show that due to the high volatility of Sb, the Sb stoichiometry is self-limiting for a finite range of growth temperatures and Sb fluxes, similar to the growth of III-V semiconductors such as GaSb and GaAs. Films grown within this window are nearly structurally indistinguishable by x-ray diffraction (XRD) and reflection high energy electron diffraction (RHEED). Here, the highest electron mobility and lowest background carrier density are obtained towards the Sb-rich bound of the window, suggesting that Sb vacancies may be a common defect. Similar semi-adsorption-controlled bounds are expected for other ternary intermetallics that contain a volatile species Z = {Sb, As, Bi}, e.g., CoTiSb, LuPtSb, GdPtBi, and NiMnSb. However, outstanding challenges remain in controlling the remaining Fe/V (X/Y) transition metal stoichiometry.
36 MATERIALS SCIENCE↗
Atomic step disorder on polycrystalline surfaces leads to spatially inhomogeneous work functions
Structural disorder causes materials’ surface electronic properties, e.g., work function (ϕ), to vary spatially, yet it is challenging to prove exact causal relationships to underlying ensemble disorder, e.g., roughness or granularity. For polycrystalline Pt, nanoscale resolution photoemission threshold mapping reveals a spatially varying ϕ=5.70±0.03 eV over a distribution of (111) vicinal grain surfaces prepared by sputter deposition and annealing. With regard to field emission and related phenomena, e.g., vacuum arc initiation, a salient feature of the ϕ distribution is that it is skewed with a long tail to values down to 5.4 eV, i.e., far below the mean, which is exponentially impactful to field emission via the Fowler–Nordheim relation. We show that the ϕ spatial variation and distribution can be explained by ensemble variations of granular tilts and surface slopes via a Smoluchowski smoothing model wherein local ϕ variations result from spatially varying densities of electric dipole moments, intrinsic to atomic steps, that locally modify ϕ. Atomic step-terrace structure is confirmed with scanning tunneling microscopy (STM) at several locations on our surfaces, and prior works showed STM evidence for atomic step dipoles at various metal surfaces. From our model, we find an atomic step edge dipole μ=0.12 D/edge atom, which is comparable to values reported in studies that utilized other methods and materials. Our results elucidate a connection between macroscopic ϕ and the nanostructure that may contribute to the spread of reported ϕ for Pt and other surfaces and may be useful toward more complete descriptions of polycrystalline metals in the models of field emission and other related vacuum electronics phenomena, e.g., arc initiation.
36 MATERIALS SCIENCE↗
Compatibility of molten plutonium with wrought and additively manufactured metal crucibles
Understanding plutonium’s interaction with metals is crucial for optimizing pyrochemical operations, nuclear fuel containment, and various actinide processing techniques. Traditionally, tantalum crucibles are employed for plutonium processing due to their high durability, excellent temperature stability, and low solubility in plutonium. However, tantalum faces challenges such as plutonium wetting and diffusion, making surface coatings particularly important for crucibles in pyrochemical applications to enhance corrosion resistance against plutonium. Tantalum is also expensive and difficult to machine, prompting the need for advanced manufacturing techniques to address these challenges. Here, in this work, we investigate the interaction of Pu with tantalum and titanium crucibles fabricated using both traditional machining methods and laser powder bed fusion (LPBF) additive manufacturing (AM). LPBF-AM is an advanced technique that allows for the creation of complex geometries from traditionally difficult-to-machine metals by using a high-powered laser to build parts. Previous studies of conventional manufactured tantalum have utilized oxidation and carburization of the surface to mitigate plutonium wetting; however, no studies of surface modified LPBF-AM material have been undertaken. These studies are crucial, given the typical differences in the grain structure between conventional and LPBF-AM materials. All crucibles underwent differential scanning calorimetry to confirm the melting of plutonium. Subsequently, the crucibles were sectioned and mounted in epoxy for microstructural analysis using optical microscopy and scanning electron microscopy. This investigation, comparing the performance of wrought vs AM metal crucibles, provides a basis for future tooling applications in actinide processing techniques and can address the challenges associated with traditional machining, particularly in pyrochemical applications.
Actinides↗
Chemical Imaging of Fine Mode Atmospheric Particles Collected from a Research Aircraft over Agricultural Fields
Vegetation and crops in agricultural areas are a significant source of both biogenic secondary organic aerosols and of directly emitted primary biological atmospheric particles (PBAPs) composed of plant fragments/debris, fungal spores, pollen, and bacteria among others. Seasonal crop harvesting significantly intensifies regional PBAP emissions and aerosolizes soil organic matter and dust particulates. In this paper, the atmospheric contributions and impact of PBAPs have been insufficiently investigated due to limited real-time observations and ambiguity in their detection by existing measurement techniques. We collected ambient particles on-board an instrumented Beechcraft BE76 Duchess research aircraft flying above actively harvested agriculture fields of corn and soybean crops. In this work, particle samples were analyzed using complementary chemical imaging techniques, including computer-controlled scanning electron microscopy coupled with elemental microanalysis to describe particle-type population and scanning transmission X-ray microscopy to provide quantitative metrics on particle internal heterogeneity. We show the particle-class contribution is consistent between corn and soybean harvesting across altitudes of 100–300 m AGL. The contribution of PBAPs in the size range of 0.15–1.25 μm is estimated to be 10–12% of ~39,000 analyzed particles. Determining viscosity with X-ray microanalysis has shown that the fine-mode organic particles collected are viscous/semisolid (10 2 –10 12 Pa s) while the majority of PBAP fragments are solid (>10 12 Pa s). The observation of submicrometer, solid carbonaceous fragments of biogenic origin has implications for the regional cloud condensation nuclei and ice nuclei budget. Therefore, seasonal harvesting of crops may play an important, yet unrecognized, role in regional cloud formation and climate.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High-Energy X-ray Diffraction Microscopy for Nuclear Forensics (FY23 Project Report)
Morphological information on nuclear material has been identified using visible light and scanning electron microscopy. These identify qualitative differences in particle morphology. Three-dimensional imaging of materials through alternating scanning electron microscopy imaging and focused ion beam milling has also been used. Unfortunately, these techniques are time- and labor-intensive, with significant sample preparation required and lengthy analysis times. Further, the resulting 3D images are qualitative, require manual identification, and do not capture statistically-representative populations. High energy X-ray 3D imaging using a direct-beam or diffracted-beam (High-Energy Diffraction Microscopy) have been developed at the Advanced Photon Source and can produce quantitative information on grains (phase, location, etc.) and pores (size distribution, sphericity) in a material. These techniques require only minutes to characterize a sample volume and are non-destructive, thus suitable for a wide range of existing samples and for confirmatory analyses to be carried out using conventional microscopy techniques.
36 MATERIALS SCIENCE↗
Photovoltaic cable jackets A comparison of representative products using combined-accelerated stress testing
Not Available
Miller, David C. (ORCID:0000000246985277)↗
Photovoltaic Cable Jackets: A Comparison of Representative Products Using Combined-Accelerated Stress Testing [Slides]
Photovoltaic (PV) cables facilitate the distribution of electricity collected from modules to the energy grid. Durable cabling enables continuous operation of PV installations, whereas cables with a lifetime less than the modules must be replaced - reducing electricity generation and adding to the operating expense. This study primarily focusses on the aging of the key cable types using the combined-accelerated stress testing (C-AST) protocol. Representative cables for utility, building, and control/auxiliary applications were examined. Cable jacket materials examined include: polyolefin, polyethylene, polyamide, poly(vinyl chloride), chlorinated polyethylene, thermoplastic elastomer, and ethylene propylene diene monomer rubber. Specimen characterizations applied include: optical microscopy, mechanical profilometry, instrumented indentation, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). A variety of performance and durability characteristics were observed, depending on the base material, polymer formulation, and jacket color. The results from C-AST are analyzed and discussed relative to a recent industry survey on electronic balance of system components in addition to a recent study where similar cables were aged using steady state ultraviolet weathering (International Electrotechnical Commission Technical Specification 62788-7-2). Recommendations are made for the screening, industry qualification, and service life prediction of PV cable jackets.
24 POWER TRANSMISSION AND DISTRIBUTION↗
Mechanical and electrical changes in electrochemically active polyimide binders for Li-ion batteries
Polyimide binders are often used in electrodes made with silicon for lithium-ion batteries for their mechanical strength and adhesion, which help mitigate mechanical issues associated with large volumetric expansion. These binders can be electrochemically active, but it is difficult to characterize what physical and chemical changes occur due to a composite electrode with multiple components and processes at play. Here, in this work, we study electrodes consisting only of polyimide binder and conductive carbon, using scanning probe-based techniques—contact resonance, force volume, and scanning spreading resistance microscopy—along with cryo-scanning transmission electron microscopy, electron energy loss spectroscopy, and energy dispersive X-ray spectroscopy. We show that lithium becomes trapped in the binder during cycling and results in large initial capacity losses, the formation of dendrite-like features, column-like domains of significantly increased mechanical modulus, and a slight increase in electronic resistivity.
25 ENERGY STORAGE↗
2D-EFICACY: Control of Metastable 2D Carbide[1]Chalcogenide Heterolayers: Strain and Moire Engineering
The experimental isolation of graphene led to the discovery of an entirely new world of two-dimensional (2D) materials in which the 2D nature often leads to emergent behaviors not seen in bulk systems. 2D transition metal dichalcogenides (TMDs) exhibit physico-chemical properties that depend on the transition metal, polymorph, thickness, and presence and type of defects. Recently, a group of thin (10-100nm) transition metal carbides (TMCs), such as Mo2C, has been synthesized that exhibit a thickness-dependent superconducting critical temperature (Tc). These thin TMCs are different from MXenes, another class of 2D materials consisting of few layers of nitrides or carbides (<5nm) produced by chemical etching and delamination. The goal of this renewal proposal is to combine experiment and computation to synthesize and elucidate the guiding principles that control the growth, orientation and strain of heterostacks of thin TMCs and TMDs composed with Nb, Ti and W. We expect to stabilize metastable hybrid phases of TMCs sandwiched between TMDs (H-TMD/Cs) with unprecedented physico-chemical properties. As part of previous DOE-funded work by the Terrones/Sinnott groups, thin (10-100 nm thick) Mo2C flakes were successfully synthesized by chemical vapor deposition (CVD). By subsequently exposing Mo2C to H2S, partial chalcogenization was achieved, resulting in heterostacks of MoCx phases and MoS2. The formation of MoS2 led to a deficiency of Mo atoms in the underlying Mo2C, resulting in an inhomogeneous phase change from α-Mo2C to γ’-MoCx and then to γ-MoC. The γ’-MoCx is a strained metastable phase and the heterostack of all three phases demonstrated an increased Tc relative to that of α-Mo2C, from 4 to 6K; its interleaved layered structure consisting of superconducting and semiconducting phases is ideal for future studies of Josephson junction series arrays. Moiré patterns in these heterostacked systems could result in new phenomena, as moiré patterns in bilayer graphene showed unconventional superconductivity and moiré excitons have been observed in twisted TMD heterobilayers. The scientific hypothesis of the proposed synergistic computational and experimental research is that orientation and strain control within confined thin metastable TMCs, sandwiched by stable phases of TMCs and layered TMDs, will depend on kinetic and thermodynamic “knobs” that include fast temperature changes, chalcogen diffusion through preferred crystallographic planes, reaction times, pressure, reactive atmosphere, precursors, and surfactants, which will also tailor properties such as superconductivity, magnetism, ferroelectricity, piezoelectricity, and catalytic performance. We will develop the guiding principles for the synthesis and stabilization of metastable H-TMD/Cs based on Nb, Ti and W. In order to validate the hypothesis, four tasks are proposed: The first task will synthesize ultra-thin TMCs based on Nb, W and Ti, by: 1) adapting the CVD method used for Mo2C, 2) plasma assisted CVD, 3) defect-mediated CVD processes, and 4) cryo-milling of carbide powders. The second task will accomplish the synthesis and basic physico-chemical characterizations of H-TMD/Cs by chalcogenization of the materials synthesized in task one, and by carbonization of TMDs. H-TMD/Cs will also be investigated for their suitability in energy conversion applications such as supercapacitors, Li and multivalent ion batteries, and electrocatalysts, topics of interest to DoE. These tasks will be carried out in close conjunction with density functional theory (DFT) calculations with insights into energetics, lattice parameters, stability, phase diagrams, band structures, and density of states of H-TMD/Cs. The third task will characterize and evaluate strain and moiré patterns at the interfaces of different H-TMD/Cs by high-resolution scanning transmission electron microscopy (HR-STEM), scanning tunneling microscopy (STM), and conductive tip atomic force microscopy. Nudged elastic band calculations with DFT will be performed to understand the chalcogen diffusion process, which will provide insights into the interfaces between different phases of TMCs and TMDs. The fourth task aims at quantifying the stability and dynamics of H-TMD/Cs by in-situ TEM and Raman studies under heating, strain, and electrical biasing. Phonon calculations using DFT will provide a basis for interpreting Raman spectra. This coherent framework involving synthesis, characterization, and computation will result in a broad scientific impact for energy related applications. The ability to develop new H-TMD/Cs will enhance a range of applications that include batteries, catalysts, switches, sensors, quantum computing components and smart coatings.
2-Dimensional materials↗
2D-EFICACY: Control of Metastable 2D Carbide Chalcogenide Heterolayers: Strain and Moire Engineering
The experimental isolation of graphene led to the discovery of an entirely new world of two-dimensional (2D) materials in which the 2D nature often leads to emergent behaviors not seen in bulk systems. 2D transition metal dichalcogenides (TMDs) exhibit physico-chemical properties that depend on the transition metal, polymorph, thickness, and presence and type of defects. Recently, a group of thin (10-100nm) transition metal carbides (TMCs), such as Mo 2 C, has been synthesized that exhibit a thickness-dependent superconducting critical temperature (Tc). These thin TMCs are different from MXenes, another class of 2D materials consisting of few layers of nitrides or carbides (<5nm) produced by chemical etching and delamination. The goal of this renewal proposal is to combine experiment and computation to synthesize and elucidate the guiding principles that control the growth, orientation and strain of heterostacks of thin TMCs and TMDs composed with Nb, Ti and W. We expect to stabilize metastable hybrid phases of TMCs sandwiched between TMDs (H-TMD/Cs) with unprecedented physico-chemical properties. As part of previous DOE-funded work by the Terrones/Sinnott groups, thin (10-100 nm thick) Mo 2 C flakes were successfully synthesized by chemical vapor deposition (CVD). By subsequently exposing Mo 2 C to H 2 S, partial chalcogenization was achieved, resulting in heterostacks of MoCx phases and MoS 2 . The formation of MoS 2 led to a deficiency of Mo atoms in the underlying Mo 2 C, resulting in an inhomogeneous phase change from α-Mo 2 C to γ’-MoCx and then to γ-MoC. The γ’-MoCx is a strained metastable phase and the heterostack of all three phases demonstrated an increased Tc relative to that of α-Mo 2 C, from 4 to 6K; its interleaved layered structure consisting of superconducting and semiconducting phases is ideal for future studies of Josephson junction series arrays. Moiré patterns in these heterostacked systems could result in new phenomena, as moiré patterns in bilayer graphene showed unconventional superconductivity and moiré excitons have been observed in twisted TMD heterobilayers. The scientific hypothesis of the proposed synergistic computational and experimental research is that orientation and strain control within confined thin metastable TMCs, sandwiched by stable phases of TMCs and layered TMDs, will depend on kinetic and thermodynamic “knobs” that include fast temperature changes, chalcogen diffusion through preferred crystallographic planes, reaction times, pressure, reactive atmosphere, precursors, and surfactants, which will also tailor properties such as superconductivity, magnetism, ferroelectricity, piezoelectricity, and catalytic performance. We will develop the guiding principles for the synthesis and stabilization of metastable H-TMD/Cs based on Nb, Ti and W. In order to validate the hypothesis, four tasks are proposed: The first task will synthesize ultra-thin TMCs based on Nb, W and Ti, by: 1) adapting the CVD method used for Mo 2 C, 2) plasma assisted CVD, 3) defect-mediated CVD processes, and 4) cryo-milling of carbide powders. The second task will accomplish the synthesis and basic physico-chemical characterizations of H-TMD/Cs by chalcogenization of the materials synthesized in task one, and by carbonization of TMDs. H-TMD/Cs will also be investigated for their suitability in energy conversion applications such as supercapacitors, Li and multivalent ion batteries, and electrocatalysts, topics of interest to DoE. These tasks will be carried out in close conjunction with density functional theory (DFT) calculations with insights into energetics, lattice parameters, stability, phase diagrams, band structures, and density of states of H-TMD/Cs. The third task will characterize and evaluate strain and moiré patterns at the interfaces of different H-TMD/Cs by high-resolution scanning transmission electron microscopy (HR-STEM), scanning tunneling microscopy (STM), and conductive tip atomic force microscopy. Nudged elastic band calculations with DFT will be performed to understand the chalcogen diffusion process, which will provide insights into the interfaces between different phases of TMCs and TMDs. The fourth task aims at quantifying the stability and dynamics of H-TMD/Cs by in-situ TEM and Raman studies under heating, strain, and electrical biasing. Phonon calculations using DFT will provide a basis for interpreting Raman spectra. This coherent framework involving synthesis, characterization, and computation will result in a broad scientific impact for energy related applications. The ability to develop new H-TMD/Cs will enhance a range of applications that include batteries, catalysts, switches, sensors, quantum computing components and smart coatings.
2-Dimensional Materials↗
Impact of dry intrusion events on the composition and mixing state of particles during the winter Aerosol and Cloud Experiment in the Eastern North Atlantic (ACE-ENA)
Abstract. Long-range transport of continental emissions has a far-reaching influence over remote regions, resulting in substantial change in the size, morphology, and composition of the local aerosol population and cloud condensation nuclei (CCN) budget. Here, we investigate the physicochemical properties of atmospheric particles collected on board a research aircraft flown over the Azores during the winter 2018 Aerosol and Cloud Experiment in the Eastern North Atlantic (ACE-ENA) campaign. Particles were collected within the marine boundary layer (MBL) and free troposphere (FT) after long-range atmospheric transport episodes facilitated by dry intrusion (DI) events. Chemical and physical properties of individual particles were investigated using complementary capabilities of computer-controlled scanning electron microscopy and X-ray spectromicroscopy to probe particle external and internal mixing state characteristics. Furthermore, real-time measurements of aerosol size distribution, cloud condensation nuclei (CCN) concentration, and back-trajectory calculations were utilized to help bring into context the findings from offline spectromicroscopy analysis. While carbonaceous particles were found to be the dominant particle type in the region, changes in the percent contribution of organics across the particle population (i.e., external mixing) shifted from 68 % to 43 % in the MBL and from 92 % to 46 % in FT samples during DI events. This change in carbonaceous contribution is counterbalanced by the increase in inorganics from 32 % to 57 % in the MBL and 8 % to 55 % in FT. The quantification of the organic volume fraction (OVF) of individual particles derived from X-ray spectromicroscopy, which relates to the multi-component internal composition of individual particles, showed a factor of 2.06 ± 0.16 and 1.11 ± 0.04 increase in the MBL and FT, respectively, among DI samples. We show that supplying particle OVF into the κ-Köhler equation can be used as a good approximation of field-measured in situ CCN concentrations. We also report changes in the κ values in the MBL from κMBL, non-DI=0.48 to κMBL, DI=0.41, while changes in the FT result in κFT, non-DI=0.36 to κFT, DI=0.33, which is consistent with enhancements in OVF followed by the DI episodes. Our observations suggest that entrainment of particles from long-range continental sources alters the mixing state population and CCN properties of aerosol in the region. The work presented here provides field observation data that can inform atmospheric models that simulate sources and particle composition in the eastern North Atlantic.
54 ENVIRONMENTAL SCIENCES↗
3D Visualization of Proteins within Metal–Organic Frameworks via Ferritin‐Enabled Electron Microscopy
Abstract Electron tomography holds great promise as a tool for investigating the 3D morphologies and internal structures of metal‐organic framework‐based protein biocomposites (protein@MOFs). Understanding the 3D spatial arrangement of proteins within protein@MOFs is paramount for developing synthetic methods to control their spatial localization and distribution patterns within the biocomposite crystals. In this study, the naturally occurring iron oxide mineral core of the protein horse spleen ferritin (Fn) is leveraged as a contrast agent to directly observe individual proteins once encapsulated into MOFs by electron microscopy techniques. This methodology couples scanning electron microscopy, transmission electron microscopy, and electron tomography to garner detailed 2D and 3D structural interpretations of where proteins spatially lie in Fn@MOF crystals, addressing the significant gaps in understanding how synthetic conditions relate to overall protein spatial localization and aggregation. These findings collectively reveal that adjusting the ligand‐to‐metal ratios, protein concentration, and the use of denaturing agents alters how proteins are arranged, localized, and aggregated within MOF crystals.
Chemistry↗
Solid-State Sintering of Core-Shell Ceramic Powders Fabricated by Particle Atomic Layer Deposition
The properties of technical ceramics are highly dependent on their microstructure, which evolves during sintering. Sintering is the process by which ceramic parts are subjected to high temperatures to activate chemical diffusion and the consumption of porosity. During the initial stage of sintering, interparticle necks between neighboring particles form and subsequently increase in size, consuming porosity as the particle centers move closer together. To experimentally determine how this process depends on particle surface composition, particle atomic layer deposition (ALD) was used to deposit a thin film of amorphous aluminum oxide (Al2O3) onto yttria-stabilized tetragonal zirconia (3YSZ) particles, producing core-shell structured powders. The uniformity of the Al2O3 film was confirmed with transmission electron microscopy and energy dispersive spectroscopy. Scanning electron microscopy was used to observe microstructural evolution during sintering, and the dihedral angles of Al2O3 and 3YSZ grains were measured to determine the ratio of interfacial energies between the 3YSZ|3YSZ, 3YSZ|Al2O3, and Al2O3|Al2O3 interfaces. Analysis of the densification kinetics revealed that the initial stage of densification is dependent on the material at the surface of the particles (ie, the Al2O3 film) and is controlled by the diffusion of Al3+ cations through Al2O3. Once the Al2O3 film has coalesced, the sintering behavior is controlled by the densification of the core material (3YSZ). Thus, core-shell powders fabricated by particle ALD sinter by a two-step process where the kinetics are dependent on the material present at interparticle contacts.
alumina↗