Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitive data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Five Year Changes in Surface Elevations Of The Greenland Ice Sheet Measured by Aircraft Laser Altimetry

The Arctic Ice Mapping group (Project AIM) at NASA's Wallops Flight Facility has been conducting systematic topographic surveys of the Greenland Ice Sheet since 1993, using scanning airborne laser altimeters combined with GPS positioning technology. Flight lines were planned to cover all major ice drainage basins, with the intention to repeat the surveys after a 5-year interval in order to detect changes in the ice-sheet volume. The first resurvey was completed in June/July, 1998, along flight lines in the southern half of Greenland which had been first surveyed in 1993. The northern half of the ice sheet will be resurveyed in 1999. The resulting data sets will provide the first comprehensive examination of regional changes in the the surface elevation of the World's second largest ice sheet. This analysis includes the ice sheet fringe areas, which are expected to be much more climatically sensitive than the interior. Data will be presented which demonstrate the combination of the ATM (Airborne Topographic Mapper) sensors and GPS (Global Positioning System) yields measurements which are repeatable at the 10 cm level over baselines in excess of 1000 km.

Krabill, W. B.↗

Employing Sensitivity Derivatives to Estimate Uncertainty Propagation in CFD

Two methods that exploit the availability of sensitivity derivatives are successfully employed to predict uncertainty propagation through Computational Fluid Dynamics (CFD) code for an inviscid airfoil problem. An approximate statistical second-moment method and a Sensitivity Derivative Enhanced Monte Carlo (SDEMC) method are successfully demonstrated on a two-dimensional problem. First- and second-order sensitivity derivatives of code output with respect to code input are obtained through an efficient incremental iterative approach. Given uncertainties in statistically independent, random, normally distributed flow parameters (input variables); these sensitivity derivatives enable one to formulate first- and second-order Taylor Series approximations for the mean and variance of CFD output quantities. Additionally, incorporation of the first-order sensitivity derivatives into the data reduction phase of a conventional Monte Carlo (MC) simulation allows for improved accuracy in determining the first moment of the CFD output. Both methods are compared to results generated using a conventional MC method. The methods that exploit the availability of sensitivity derivatives are found to be valid when considering small deviations from input mean values.

Putko, Michele M.↗

Model-based parameter estimation using cardiovascular response to orthostatic stress

This paper presents a cardiovascular model that is capable of simulating the short-term (< or approximately equal to 3 min) transient hemodynamic response to gravitational stress and a gradient-based optimization method that allows for the automated estimation of model parameters from simulated or experimental data. We perform a sensitivity analysis of the transient heart rate response to determine which parameters of the model impact the heart rate dynamics significantly. We subsequently include only those parameters in the estimation routine that impact the transient heart rate dynamics substantially. We apply the estimation algorithm to both simulated and real data and showed that restriction to the 20 most important parameters does not impair our ability to match the data.

Non-NASA Center↗

Fiscal year 1981 US corn and soybeans pilot preliminary experiment plan, phase 1

A draft of the preliminary experiment plan for the foreign commodity production forecasting project fiscal year 1981 is presented. This draft plan includes: definition of the phase 1 and 2 U.S. pilot objectives; the proposed experiment design to evaluate crop calendar, area estimation, and area aggregation components for corn and soybean technologies using 1978/1979 crop-year data; a description of individual sensitivity evaluations of the baseline corn and soybean segment classification procedure; and technology and data assessment in support of the corn and soybean estimation technology for use in the U.S. central corn belt.

Livingston, G. P.↗

Development of visible/infrared/microwave agriculture classification and biomass estimation algorithms

Agricultural crop classification models using two or more spectral regions (visible through microwave) are considered in an effort to estimate biomass at Guymon, Oklahoma Dalhart, Texas. Both grounds truth and aerial data were used. Results indicate that inclusion of C, L, and P band active microwave data, from look angles greater than 35 deg from nadir, with visible and infrared data improve crop discrimination and biomass estimates compared to results using only visible and infrared data. The microwave frequencies were sensitive to different biomass levels. The K and C band were sensitive to differences at low biomass levels, while P band was sensitive to differences at high biomass levels. Two indices, one using only active microwave data and the other using data from the middle and near infrared bands, were well correlated to total biomass. It is implied that inclusion of active microwave sensors with visible and infrared sensors on future satellites could aid in crop discrimination and biomass estimation.

Rosenthal, W. D.↗

LISA Optics Model: Early Results

The Laser Interferometer Space Antenna (LISA) optics model is used to generate a synthetic data stream in the absence of gravitational waves. The simulation has the spacecraft in moving in their respective Keplerian orbits. The pointing of the spacecraft and station keeping about the proof masses is accomplished using a control scheme, which minimizes the disturbance on the proof masses in the sensitive direction. The resulting data stream gives an indication of the magnitude of instrumental noise due to pointing jitter and motions of the spacecraft with respect to the proof masses. Computational details are presented and the results discussed.

Waluschka, Eugene↗

Assimilation of Hyperspectral Infrared Radiances from the Cloud-Clearing Methodology: Results from the 2017 Atlantic Tropical Cyclone Season

Assimilation of cloud-affected radiances has the potential to dramatically improve numerical weather prediction systems, as has already been widely shown by use of all-sky microwave radiances. Assimilation of cloudy infrared (IR) radiances, however, lags far behind and only clear-sky radiances are used operationally, leaving data voids in dynamically sensitive areas, such as around tropical cyclones. This team has previously shown the positive benefit of assimilating cloud-cleared IR radiances from hyperspectral sensors (CCRs) and in this work applies the cloud-clearing methodology to generate fully customizable CCRs using an algorithm designed to be portable and reduce latency. These data are successfully assimilated in the Goddard Earth Observing System (GEOS) data assimilation system (DAS) for the 2017 Atlantic Hurricane season.

E L Mcgrath-Spangler↗

The Nature of the Optical "Jets" in the Spiral Galaxy NGC 1097

We present new observations of the jet features in the barred spiral galaxy NGC 1097, including optical spectroscopy of the brightest jet features, two-color optical imagery, new VLA mapping at 327 MHz, and archival 1.4 GHz VLA data reprocessed for improved sensitivity. No optical emission lines appear to an equivalent width limit of 15-30 A (depending on the line wavelength). The jets are uniformly blue, with B - V = 0.45 for the two well-observed jets R1 and R2. No radio emission from the jets is detected at either frequency; the 327-MHz data set particularly stringent limits on "fossil" emission from aging synchrotron electrons. The morphology of the jets is shown to be inconsistent with any conical distribution of emission enhanced by edge-brightening; their combination of transverse profile and relative narrowness cannot be reproduced with cone models. The optical colors, lack of radio emission, and morphology of the features lead us to conclude that they are tidal manifestations, perhaps produced by multiple encounters of the small elliptical companion NGC 1097A with the disk of NGC 1097. We present photometric and morphological comparisons to the tail of NGC 465 1, which is similar in scale and morphology to the northeast "dogleg" feature R1 in NGC 1097.

Wehrle, Ann E.↗

A comparison of motor submodels in the optimal control model

Properties of several structural variations in the neuromotor interface portion of the optimal control model (OCM) are investigated. For example, it is known that commanding control-rate introduces an open-loop pole at S=O and will generate low frequency phase and magnitude characteristics similar to experimental data. However, this gives rise to unusually high sensitivities with respect to motor and sensor noise-ratios, thereby reducing the models' predictive capabilities. Relationships for different motor submodels are discussed to show sources of these sensitivities. The models investigated include both pseudo motor-noise and actual (system driving) motor-noise characterizations. The effects of explicit proprioceptive feedback in the OCM is also examined. To show graphically the effects of each submodel on system outputs, sensitivity studies are included, and compared to data obtained from other tests.

Lancraft, R. E.↗

Mount St. Helens related aerosol properties from solar extinction measurements

A network of solar radiometers, operated on the North American Continent for an average of 2 years before the first major eruption of Mount St. Helens, Washington, continues to collect direct solar data through the eruptive phase of this volcano. The radiometers collect spectral data through 12 interference filters spanning the sensitivity of the photodiode used as detector. The data are collected every 5 minutes in seven filters and every 15 minutes in five additional filters. A variant of the classical Langley method has been used to measure the optical depth of the aerosols as a function of wavelength. The network, which is the nearest station, is located some 180 kilometers east of the volcano, well within range of noticeable effects during much of the minor as well as major activity. The wavelength dependence of the aerosol-optical depth before and after the 22 July 1980 major eruption, which was well characterized because of favorable meteorological conditions is discussed.

Michalsky, J. J.↗

Structural Model Tuning Tool: User's Reference Manual

This report presents an efficient approach for tuning finite element models to match the measured ground vibration test and static test data. Frequencies, mode shapes, total weight, location of the center of gravity, and static deformation computed from the finite element model are matched to the measured data. The model tuning procedure used in this work is based on solving an optimization problem in which the errors for the considered metrics, between the finite element prediction and the measured data, are minimized. Analytical sensitivity values of performance indices are computed using the NASTRAN-generated sensitivity values together with the in-house computer codes, which allow for faster computational time and the use of gradient-based optimizers. The method is applied to the Aerostructures Test Wing IV model. The study shows that the military standard and the National Aeronautics and Space Administration standard for comparing analytical and experimental modal data are all satisfied. The final finite element model correlates well with the test data. The flutter speed decreases by 8.91 percent after model tuning compared with the original Aerostructures Test Wing IV design.

Chan-gi Pak↗

Variation of solar cell sensitivity and solar radiation on tilted surfaces

An empirical study was performed (1) to evaluate the validity of various insolation models used to compute solar radiation incident on tilted surfaces from global data measured on horizontal surfaces and (2) to determine the variation of solar cell sensitivity to solar radiation over a wide range of atmospheric condition. Evaluation of the insolation data indicates that the isotropic sky model of Liu and Jordan underestimates the amount of solar radiation falling on tilted surfaces by as much as 10%. An anisotropic-clear-sky model proposed by Temps and Coulson was also evaluated and found to be deficient under cloudy conditions. A new model, formulated herein, reduced the deviations between measured and predicted insolation to less than 3%. Evaluation of solar cell sensitivity data indicates small change (2-3%) in sensitivity from winter to summer for tilted cells. The feasibility of using such global data as a means for calibrating terrestrial solar cells as done by Treble is discussed.

Klucher, T. M.↗

Systems Analysis Of Advanced Coal-Based Power Plants

Report presents appraisal of integrated coal-gasification/fuel-cell power plants. Based on study comparing fuel-cell technologies with each other and with coal-based alternatives and recommends most promising ones for research and development. Evaluates capital cost, cost of electricity, fuel consumption, and conformance with environmental standards. Analyzes sensitivity of cost of electricity to changes in fuel cost, to economic assumptions, and to level of technology. Recommends further evaluation of integrated coal-gasification/fuel-cell integrated coal-gasification/combined-cycle, and pulverized-coal-fired plants. Concludes with appendixes detailing plant-performance models, subsystem-performance parameters, performance goals, cost bases, plant-cost data sheets, and plant sensitivity to fuel-cell performance.

Ferrall, Joseph F.↗

Sensitivity studies of Mars orbiters for Mars gravity recovery

The purpose of the study is to assess the Mars orbiters with regard to their sensitivity to the Mars gravity field. The sensitivity is evaluated and quantified in terms of the magnitude and frequency of the orbiter position and velocity perturbations. The strengths and weaknesses of each orbiter, including Mariner 9, Viking 1 and 2, Mars Observer, Phobos, and Deimos, when used as a sensor of the Mars gravity field are assessed. It is shown that Mariner 9 and Viking data supply strong information on the low degree and order coefficients, with Mariner 9 contributing to the even-ordered terms out to about degrees 10 to 12. Phobos and Deimos are shown to be able to contribute to the lowest degrees of the gravity field, while the Mars Observer, in addition to the lower-degree and -order harmonics, will be responsive to coefficients as high as degree and order 50. Emphasis is placed on the spacecraft orbit plane orientation allowing the radial velocity perturbations to be measured by the Doppler data, thus enhancing the sensitivity to the gravitational signal.

Rosborough, George W.↗

Spatial Aspects of Multi-Sensor Data Fusion: Aerosol Optical Thickness

The Goddard Earth Sciences Data and Information Services Center (GES DISC) investigated the applicability and limitations of combining multi-sensor data through data fusion, to increase the usefulness of the multitude of NASA remote sensing data sets, and as part of a larger effort to integrate this capability in the GES-DISC Interactive Online Visualization and Analysis Infrastructure (Giovanni). This initial study focused on merging daily mean Aerosol Optical Thickness (AOT), as measured by the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard the Terra and Aqua satellites, to increase spatial coverage and produce complete fields to facilitate comparison with models and station data. The fusion algorithm used the maximum likelihood technique to merge the pixel values where available. The algorithm was applied to two regional AOT subsets (with mostly regular and irregular gaps, respectively) and a set of AOT fields that differed only in the size and location of artificially created gaps. The Cumulative Semivariogram (CSV) was found to be sensitive to the spatial distribution of gap areas and, thus, useful for assessing the sensitivity of the fused data to spatial gaps.

Leptoukh, Gregory↗

Field mapping for heat capacity mapping determinations: Ground support for airborne thermal surveys

Thermal models independently derived by Watson, Outcalt, and Rosema were compared using similar input data and found to yield very different results. Each model has a varying degree of sensitivity to any specified parameter. Data collected at Pisgah Crater-Lavic Lake was re-examined to indicate serious discrepancy in results for thermal inertia from Jet Lab Propulsion Laboratory calculations, when made using the same orginal data sets.

Lyon, R. J. P.↗

Automated analyzer for aircraft measurements of atmospheric methane and total hydrocarbons

An automated methane/total hydrocarbon analyzer is presented, which can produce alternate methane/total hydrocarbon measurements every 7 seconds to provide the spatial resolution required for regional hydrocarbon measurements at aircraft speeds. The construction and sampling techniques developed for the aircraft mounted system are discussed. A technique to periodically measure atmosphere oxygen is incorporated into the analyzer to ensure accurate hydrocarbon measurements, and a data collection methodology is developed to minimize errors resulting from changes in flame ionization detector sensitivity at different altitudes. Aircraft data acquired at the 1979 Southeastern Virginia Urban Plume Study are also presented, which illustrate the application of the instrument to a troposphere pollution plume.

Cofer, W. R., III↗