Search NASA⌕ Search

SEARCH · Search NASA

Results for “Specification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

GeoAI advances in specific landform mapping

Landform mapping (also referred to as geomorphology or geomorphometry) can be divided into two domains: general and specific (Evans 2012). Whereas general landform mapping categorizes all elements of the study area into landform classes, such as ridges, valleys, peaks, and depressions, the mapping of specific landforms requires the delineation (even if fuzzy) of individual landforms. The former is mainly driven by physical properties such as elevation, slope, and curvature. The latter, however, must consider the cognitive (human) reasoning that discriminates individual landforms in addition to these physical properties (Arundel and Sinha 2018). Both mapping forms are important. General geomorphometry is needed to understand geological and ecological processes and as boundary layer input to climate and environmental models. Specific geomorphometry supports such activities as disaster management and recovery, emergency response, transportation, and navigation. In the United States, individual landforms of interest are named in the U.S. Geological Survey (USGS) Geographic Names Information System, a point dataset captured specifically to digitize geographic names from the USGS Historical Topographic Map Collection (HTMC). Named landform extent is represented only by the name placement in the HTMC. Recent work has investigated CNN-based deep learning methods to capture these extents in machine-readable form. These studies first relied on physical properties (Arundel et al. 2020) and then included the HTMC as a band in RGB images in limited testing (Arundel et al. 2023). Results from the HTMC dataset surpassed those using just physical properties and using the HTMC alone performed best due to the hillshading and elevation (contour) data incorporated into the topographic maps. However, results fell short of an operational capacity to map all named landforms in the United States. Thus, our current work expands upon past research by focusing on the HTMC and physical information as inputs and the named landform label extents. Specifically, we propose to leverage pre-trained foundation models for segmentation and optical character recognition (OCR) models to jointly map landforms in the United States. Our approach aims to bridge the disparities among the independent information sources to facilitate informed decision-making. The modeling pipeline performs (1) segmentation using the physical information and (2) information extraction using OCR, in parallel. Then a computer vision approach merges the two branches into a labeled segmentation. References: Arundel, Samantha T., Wenwen Li, and Sizhe Wang. 2020. “GeoNat v1.0: A Dataset for Natural Feature Mapping with Artificial Intelligence and Supervised Learning.” Transactions in GIS 24 (3): 556–72. https://doi.org/10.1111/tgis.12633. Arundel, Samantha T, and Gaurav Sinha. 2018. “Validating GEOBIA Based Terrain Segmentation and Classification for Automated Delineation of Cognitively Salient Landforms BT - Proceedings of Workshops and Posters at the 13th International Conference on Spatial Information Theory (COSIT 2017).” In Proceedings of Workshops and Posters at the 13th International Conference on Spatial Information Theory (COSIT 2017), Lecture Notes in Geoinformation and Cartography, edited by Paolo Fogliaroni, Andrea Ballatore, and Eliseo Clementini, 9–14. Cham: Springer International Publishing. Arundel, Samantha T., Gaurav Sinha, Wenwen Li, David P. Martin, Kevin G. McKeehan, and Philip T. Thiem. 2023. “Historical Maps Inform Landform Cognition in Machine Learning.” Abstracts of the ICA 6 (August): 1–2. https://doi.org/10.5194/ica-abs-6-10-2023. Evans, Ian S. 2012. “Geomorphometry and Landform Mapping: What Is a Landform?” Geomorphology 137 (1): 94–106. https://doi.org/10.1016/j.geomorph.2010.09.029.

machine learning↗

GeoAI Advances in Specific Landform Mapping

Landform mapping (also referred to as geomorphology or geomorphometry) can be divided into two domains: general and specific (Evans 2012). Whereas general landform mapping categorizes all elements of the study area into landform classes, such as ridges, valleys, peaks, and depressions, the mapping of specific landforms requires the delineation (even if fuzzy) of individual landforms. The former is mainly driven by physical properties such as elevation, slope, and curvature. The latter, however, must consider the cognitive (human) reasoning that discriminates individual landforms in addition to these physical properties (Arundel and Sinha 2018). Both mapping forms are important. General geomorphometry is needed to understand geological and ecological processes and as boundary layer input to climate and environmental models. Specific geomorphometry supports such activities as disaster management and recovery, emergency response, transportation, and navigation. In the United States, individual landforms of interest are named in the U.S. Geological Survey (USGS) Geographic Names Information System, a point dataset captured specifically to digitize geographic names from the USGS Historical Topographic Map Collection (HTMC). Named landform extent is represented only by the name placement in the HTMC. Recent work has investigated CNN-based deep learning methods to capture these extents in machine-readable form. These studies first relied on physical properties (Arundel et al. 2020) and then included the HTMC as a band in RGB images in limited testing (Arundel et al. 2023). Results from the HTMC dataset surpassed those using just physical properties and using the HTMC alone performed best due to the hillshading and elevation (contour) data incorporated into the topographic maps. However, results fell short of an operational capacity to map all named landforms in the United States. Thus, our current work expands upon past research by focusing on the HTMC and physical information as inputs and the named landform label extents. Specifically, we propose to leverage pre-trained foundation models for segmentation and optical character recognition (OCR) models to jointly map landforms in the United States. Our approach aims to bridge the disparities among the independent information sources to facilitate informed decision-making. The modeling pipeline performs (1) segmentation using the physical information and (2) information extraction using OCR, in parallel. Then a computer vision approach merges the two branches into a labeled segmentation.

machine learning↗

Storing files in a parallel computing system based on user or application specification

Techniques are provided for storing files in a parallel computing system based on a user-specification. A plurality of files generated by a distributed application in a parallel computing system are stored by obtaining a specification from the distributed application indicating how the plurality of files should be stored; and storing one or more of the plurality of files in one or more storage nodes of a multi-tier storage system based on the specification. The plurality of files comprise a plurality of complete files and/or a plurality of sub-files. The specification can optionally be processed by a daemon executing on one or more nodes in a multi-tier storage system. The specification indicates how the plurality of files should be stored, for example, identifying one or more storage nodes where the plurality of files should be stored.

97 MATHEMATICS AND COMPUTING↗

Isotope Specific Remediation Media and Systems - 13614

On March 11, 2011, now two years ago, the magnitude 9.0 Great East Japan earthquake, Tohoku, hit off the Fukushima coast of Japan. While, of course, most of the outcome of this unprecedented natural and manmade disaster was a negative, both in Japan and worldwide, there have been some extremely invaluable lessons learned and new emergency recovery technologies and systems developed. As always, the mother of invention is necessity. Among these developments has been the development and full-scale implementation of proven isotope specific media (ISMs) with the intent of surgically removing specific hazardous isotopes for the purpose of minimizing dose to workers and the environment. The first such ISMs to be deployed at the Fukushima site were those removing cesium (Cs-137) and iodine (I-129). Since deployment on June 17, 2011, along with treated cooling water recycle, some 70% of the curies in the building liquid wastes have been removed by the Kurion system alone. The current levels of cesium are now only 2% of the original levels. Such an unprecedented, 'external cooling system' not only allowed the eventual cold shut down of the reactors in mid-December, 2011, but has allowed workers to concentrate on the cleanup of other areas of the site. Water treatment will continue for quite some time due to continued leakage into the buildings and the eventual goal of cleaning up the reactors and fuel pools themselves. With the cesium removal now in routine operation, other isotopes of concern are likely to become priorities. One such isotope is that of strontium, and yttrium (Sr-90 and Y-90), which is still at original levels causing further dose issues as well as impediments to discharge of the treated waste waters. For over a year now, a new synthetic strontium specific media has been under development and testing both in our licensed facility in Oak Ridge, Tennessee, but also in confirmatory tests by the Japan Atomic Energy Agency (JAEA) in Japan for Tokyo Electric Power Company (TEPCO). The tests have proven quite successful, even in high salt conditions, and, with loading and dose calculations being completed, will be proposed to add to the existing cesium system. There is no doubt, as high gamma isotopes are removed, other recalcitrant isotopes such as this will require innovative removal media, systems and techniques. Also coming out of this international effort are other ISM media and systems that can be applied more broadly to both Commercial Nuclear Power Plants (NPPs) as well as in Department of Energy (DOE) applications. This cesium and strontium specific media has further been successfully tested in 2012 at a Magnox station in the UK. The resulting proposed mitigation systems for pond and vault cleanup look quite promising. An extremely unusual ISM for carbon 14 (C-14), nickel (Ni-63) and cesium (Cs-137) has been developed for Diablo Canyon NPP for dose reduction testing in their fuel pool. These media will be deployed in Submersible Media Filter (SMF) and Submersible Columns (SC) systems adapted to standard Tri-Nuclear{sup R} housings common in the U.S. and UK. External Vessel Systems (mini-Fukushima) have also been developed as a second mitigation system for D and D and outages. Finally, technetium (Tc- 99) specific media developed for the Waste Treatment Plant (WTP) recycle or condensate (secondary) waste streams (WM 2011) are being further perfected and tested for At-Tank Tc-99 removal, as well as At Tank Cs media. In addition to the on-going media development, systems for deploying such media have developed over the last year and are in laboratory- and full-scale testing. These systems include the fore mentioned Submersible Media Filters (SMF), Submersible Columns (SC) and external pilot- and full-scale, lead-lag, canister systems. This paper will include the media development and testing, as well as that of the deployment systems themselves. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

U.S. DOE's environmental management site-specific advisory board: 20 years of effective community involvement - 15377

This paper provides an overview of the U.S. DOE's Environmental Management Site-Specific Advisory Board from its roots in the early 1990's at the Keystone Center to its current activities. The Environmental Management Site-Specific Advisory Board has a unique mandate to provide input regarding the cleanup of nuclear legacy sites in the United States. Chartered under the Federal Advisory Committee Act, the Environmental Management Site-Specific Advisory Board comprises eight local boards. The Office of Environmental Management has made public participation a fundamental component of its cleanup mission and has found that the Environmental Management Site-Specific Advisory Board has contributed greatly to bringing community input regarding values and priorities to the cleanup decision-making processes. Public participation that involves ongoing community engagement has inherent challenges; the Environmental Management Site-Specific Advisory Board operates with additional challenges that reflect the political and technical nature of U.S. DOE's work. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Site-Specific Advisory Board Experience - A Members Perspective - 19069

The input of stakeholders and in particular the local community, in decisions related to environmental cleanup is critical to the success of the Department of Energy (DOE) Environmental Management (EM) mission. DOE EM engages stakeholders in a variety of ways and the Site-Specific Advisory Boards (SSABs) represent one avenue. SSABs are federally appointed citizens' panels that provide independent and unbiased advice and recommendations to the DOE EM. The Oak Ridge Site Specific Advisory Board (ORSSAB) is the citizens' panel that provides advice and recommendations to the DOE Oak Ridge Office of EM (OREM). The Board considers specific issues on a Work Plan that is developed each fiscal year through a collaborative effort. Issues are introduced through presentations by DOE OREM personnel at monthly Board meetings and further explored through field trips to specific sites (if appropriate) and subcommittee meetings. Issue groups comprised of ORSSAB members are formed and these personnel take on the task of developing a recommendation (if warranted) on the issue. The recommendation follows an approval process and when (if) approved by the Board is submitted to DOE OREM. Although the development of recommendations is the primary mission of the ORSSAB, the Chair and Vice Chair also participate in Chairs Meetings, held twice a year and comprised of the Chair and Vice Chair of each of the eight DOE EM SSAB's across the country. Additional recommendations pertinent to all the sites are developed through these collaborations. Once endorsed by the member Boards, these recommendations are submitted to DOE EM headquarters. Participation in the Chair's meetings and other engagement opportunities allow Board members to become well educated in DOE EMs mission so that recommendations can be as relevant, meaningful and specific as possible. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An Axiom System for Sequence-Based Specification

This paper establishes an axiomatic foundation and a representation theorem for the rigorous, constructive process, called sequence-based specification, of deriving precise specifications from ordinary (informal) statements of functional requirements. The representation theorem targets a special class of Mealy state machines, and algorithms are presented for converting from the set of sequences that define the specification to the equivalent Mealy machine, and vice versa. Since its inception, sequence-based specification has been effectively used in a variety of real applications, with gains reported in quality and productivity. This paper establishes the mathematical foundation independently of the process itself.

99 GENERAL AND MISCELLANEOUS↗

Increase in specific heat and possible hindered rotation of interstitial C{sub 2} molecules in neutron-irradiated graphite

Irradiation-induced increase in the low-temperature specific heat has been measured in the temperature range of 1.9-43 K in graphite neutron-irradiated to 1.4x10{sup 20} n/cm{sup 2} (E>1 MeV) around 333 K. The increase of the lattice specific heat is interpreted as due to the hindered rotation of interstitial C{sub 2} molecules in the periodic potential of V(phi)=(V{sub 0}/2)(1+cos 2phi), where phi is the angle of rotation and V{sub 0} is 0.040 eV. The first-excited rotational level is 0.0058 eV above the ground state and the rotational frequency is 1.39x10{sup 12} s{sup -1}. This result shows that C{sub 2} molecules do not form covalent bonds with atoms in the surrounding graphite layers. It is in marked contrast with the result of recent first-principles theoretical calculations that interstitial atoms form strong covalent bonds with atoms in the graphite layers. The concentration of C{sub 2} molecules is estimated to be f=1.16%. The hole concentration, deduced from the electronic specific heat and the SWMcC band model, suggests that one single vacancy creates one hole and the single vacancy concentration is 2f. Since the measurement of the lattice specific heat gave the concentration of the defects directly, we could evaluate some physical properties for a unit concentration of the defects. The volume changes by a single interstitial atom, an interstitial C{sub 2} molecule, and a single vacancy are deduced to be 2.6+-0.3, 9.3+-1.4, and -0.46+-0.07 atomic volumes, respectively. The formation energy of a Frenkel pair is estimated to be 12.6+-2.5 eV. The phonon scattering with a reciprocal relaxation time proportional to omega{sup 1.5}, where omega is the angular frequency of phonons, is attributed to the scattering of phonons by the disklike strain around interstitial C{sub 2} molecule clusters. A broad dip in the a-axis thermal conductivity observed below room temperature is attributed to the resonance scattering of phonons by the hindered rotation of interstitial C{sub 2} molecules as well as by the vibration of these molecules as rigid units. The positron lifetime of 350 ps is suggested to be the lifetime of positrons trapped in an open space on the periphery of the interstitial clusters of C{sub 2} molecules. The well-known Wigner energy is stored mainly as interstitial C{sub 2} molecules and single vacancies.

36 MATERIALS SCIENCE↗

SPC-70486 Rev 0 Stirling Engine Prototype Performance Specification

Idaho National Laboratory (INL) is developing a small microreactor to produce electrical power utilizing a small nuclear core and Stirling engines under the Microreactor Application Research Validation and Evaluation (MARVEL) program. The purpose of this performance specification is to define requirements to build and test the Stirling Engine prototype, including interfacing with Kinnetech in the development/test of the engines. This specification includes prototyping components only and are not for use in the reactor. Prototype testing is a preliminary test to be conducted with conceptual equipment from which a final design will be developed. The results of the testing defined herein will not be used as a qualification test. The Stirling Engines have an engine controller module (QEC). Currently, the QEC doesn’t have a means to stop the engine. An analog controlled engine braking system must be developed and tested with the engine prototype. Any conflict between this specification and any supplementary specifications in the procurement documents requires written clarification from the Contractor prior to proceeding with any work. Any deviation from the procurement documents requires approval by the Contractor with the change request process.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

Understanding specificity in metabolic pathways-Structural biology of human nucleotide metabolism

Interactions are the foundation of life at the molecular level. In the plethora of activities in the cell, the evolution of enzyme specificity requires the balancing of appropriate substrate affinity with a negative selection, in order to minimize interactions with other potential substrates in the cell. To understand the structural basis for enzyme specificity, the comparison of structural and biochemical data between enzymes within pathways using similar substrates and effectors is valuable. Nucleotide metabolism is one of the largest metabolic pathways in the human cell and is of outstanding therapeutic importance since it activates and catabolises nucleoside based anti-proliferative drugs and serves as a direct target for anti-proliferative drugs. In recent years the structural coverage of the enzymes involved in human nucleotide metabolism has been dramatically improved and is approaching completion. An important factor has been the contribution from the Structural Genomics Consortium (SGC) at Karolinska Institutet, which recently has solved 33 novel structures of enzymes and enzyme domains in human nucleotide metabolism pathways and homologs thereof. In this review we will discuss some of the principles for substrate specificity of enzymes in human nucleotide metabolism illustrated by a selected set of enzyme families where a detailed understanding of the structural determinants for specificity is now emerging.

60 APPLIED LIFE SCIENCES↗

A Specific miRNA Signature Correlates With Complete Pathological Response to Neoadjuvant Chemoradiotherapy in Locally Advanced Rectal Cancer

Purpose: MicroRNAs (miRNAs) are small, noncoding RNA molecules that can be down- or upregulated in colorectal cancer and have been associated to prognosis and response to treatment. We studied miRNA expression in tumor biopsies of patients with rectal cancer to identify a specific 'signature' correlating with pathological complete response (pCR) after neoadjuvant chemoradiotherapy. Methods and Materials: A total of 38 T3-4/N+ rectal cancer patients received capecitabine-oxaliplatin and radiotherapy followed by surgery. Pathologic response was scored according to the Mandard TRG scale. MiRNA expression was analyzed by microarray and confirmed by real-time Reverse Transcription Polymerase Chain Reaction (qRT-PCR) on frozen biopsies obtained before treatment. The correlation between miRNA expression and TRG, coded as TRG1 (pCR) vs. TRG >1 (no pCR), was assessed by methods specifically designed for this study. Results: Microarray analysis selected 14 miRNAs as being differentially expressed in TRG1 patients, and 13 were confirmed by qRT-PCR: 11 miRNAs (miR-1183, miR-483-5p, miR-622, miR-125a-3p, miR-1224-5p, miR-188-5p, miR-1471, miR-671-5p, miR-1909 Asterisk-Operator , miR-630, miR-765) were significantly upregulated in TRG1 patients, 2 (miR-1274b, miR-720) were downexpressed. MiR-622 and miR-630 had a 100% sensitivity and specificity in selecting TRG1 cases. Conclusions: A set of 13 miRNAs is strongly associated with pCR and may represent a specific predictor of response to chemoradiotherapy in rectal cancer patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Institutional Patient-specific IMRT QA Does Not Predict Unacceptable Plan Delivery

Purpose: To determine whether in-house patient-specific intensity modulated radiation therapy quality assurance (IMRT QA) results predict Imaging and Radiation Oncology Core (IROC)-Houston phantom results. Methods and Materials: IROC Houston's IMRT head and neck phantoms have been irradiated by numerous institutions as part of clinical trial credentialing. We retrospectively compared these phantom results with those of in-house IMRT QA (following the institution's clinical process) for 855 irradiations performed between 2003 and 2013. The sensitivity and specificity of IMRT QA to detect unacceptable or acceptable plans were determined relative to the IROC Houston phantom results. Additional analyses evaluated specific IMRT QA dosimeters and analysis methods. Results: IMRT QA universally showed poor sensitivity relative to the head and neck phantom, that is, poor ability to predict a failing IROC Houston phantom result. Depending on how the IMRT QA results were interpreted, overall sensitivity ranged from 2% to 18%. For different IMRT QA methods, sensitivity ranged from 3% to 54%. Although the observed sensitivity was particularly poor at clinical thresholds (eg 3% dose difference or 90% of pixels passing gamma), receiver operator characteristic analysis indicated that no threshold showed good sensitivity and specificity for the devices evaluated. Conclusions: IMRT QA is not a reasonable replacement for a credentialing phantom. Moreover, the particularly poor agreement between IMRT QA and the IROC Houston phantoms highlights surprising inconsistency in the QA process.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Evolution of I-SceI Homing Endonucleases with Increased DNA Recognition Site Specificity

Elucidating how homing endonucleases undergo changes in recognition site specificity will facilitate efforts to engineer proteins for gene therapy applications. I-SceI is a monomeric homing endonuclease that recognizes and cleaves within an 18-bp target. It tolerates limited degeneracy in its target sequence, including substitution of a C:G{sub +4} base pair for the wild-type A:T{sub +4} base pair. Libraries encoding randomized amino acids at I-SceI residue positions that contact or are proximal to A:T{sub +4} were used in conjunction with a bacterial one-hybrid system to select I-SceI derivatives that bind to recognition sites containing either the A:T{sub +4} or the C:G{sub +4} base pairs. As expected, isolates encoding wild-type residues at the randomized positions were selected using either target sequence. All I-SceI proteins isolated using the C:G{sub +4} recognition site included small side-chain substitutions at G100 and either contained (K86R/G100T, K86R/G100S and K86R/G100C) or lacked (G100A, G100T) a K86R substitution. Interestingly, the binding affinities of the selected variants for the wild-type A:T{sub +4} target are 4- to 11-fold lower than that of wild-type I-SceI, whereas those for the C:G{sub +4} target are similar. The increased specificity of the mutant proteins is also evident in binding experiments in vivo. These differences in binding affinities account for the observed -36-fold difference in target preference between the K86R/G100T and wild-type proteins in DNA cleavage assays. An X-ray crystal structure of the K86R/G100T mutant protein bound to a DNA duplex containing the C:G{sub +4} substitution suggests how sequence specificity of a homing enzyme can increase. This biochemical and structural analysis defines one pathway by which site specificity is augmented for a homing endonuclease.

59 BASIC BIOLOGICAL SCIENCES↗

Specific surface area and chemical reactivity of quartz powders during mechanical processing

Highlights: Black-Right-Pointing-Pointer Quartz powders were submitted to mechanical processing. Black-Right-Pointing-Pointer The specific surface area and the chemical reactivity increased. Black-Right-Pointing-Pointer A model was developed to describe the observed processes. Black-Right-Pointing-Pointer The amount of powder processed at impact was estimated. Black-Right-Pointing-Pointer The surface density of reactive centers was also estimated by using a test reaction. -- Abstract: The present work focuses on the specific surface area increase, and on the related chemical reactivity enhancement of quartz powders submitted to mechanical processing. The mechanical treatment was carried out in a suitably developed ball mill allowing the control of the frequency and energy of the impacts between ball and reactor. The specific surface area was directly measured by nitrogen physisorption, whereas electron microscopy was used to determine the size distribution of powder particles. Based on the experimental results, a simplified mathematical model was developed to describe the process of specific surface area increase on a phenomenological basis. The model permits to gain valuable information on the amount of powder processed in individual impacts. The density of reactive centers at the surface of powder particles was also estimated by using the neutralization of a free radical as a test reaction. It is shown that the surface density of reactive centers increases with the energy of collisions.

36 MATERIALS SCIENCE↗

Study of Ion Specific Interactions of Alkali Cations with Dicarboxylate Dianions

Alkali metal cations often show pronounced ion specific interactions and selectivity with macromolecules in biological processes, colloids, and interfacial sciences, but a fundamental understanding about the underlying microscopic mechanism is still very limited. Here we report a direct probe of interactions between alkali metal cations (M{sup +}) and dicarboxylate dianions, O{sub 2}C(CH{sub 2})nCO{sub 2} (D{sub n}{sup 2-}) in the gas phase by combined photoelectron spectroscopy (PES) and ab initio electronic structure calculation on nine M{sup +}-D{sub n}{sup 2-} complexes (M = Li, Na, K; n = 2, 4, 6). PES spectra show that the electron binding energy (EBE) decreases from Li{sup +} to Na{sup +} to K{sup +} for complexes of M{sup +}-D{sub 2}{sup 2-}, whereas the order is Li{sup +} <Na{sup +} {approx} K{sup +} when M{sup +} interacts with a more flexible D{sub 6}{sup 2-} dianion. Theoretical modeling suggests that M{sup +} prefers to interact with both ends of the carboxylate -COOO{sup -} groups by bending the flexible aliphatic backbone, and the local binding environments are found to depend upon dicarboxylate size n and the specific cation M{sup +}. The observed variance of EBEs reflects how well a specific dicarboxylate dianion accommodates each M{sup +}. This work demonstrates the delicate interplay among several factors (electrostatic interaction, size matching, and strain energy) that likely play critical roles in determining the structures and energetics of gaseous clusters as well as ion specificity and selectivity in solutions and biological systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spinophilin Directs Protein Phosphatse 1 Specificity by Blocking Substrate Binding Sites

The serine/threonine protein phosphatase 1 (PP1) dephosphorylates hundreds of key biological targets. PP1 associates with {ge}200 regulatory proteins to form highly specific holoenzymes. These regulatory proteins target PP1 to its point of action within the cell and prime its enzymatic specificity for particular substrates. However, how they direct PP1's specificity is not understood. Here we show that spinophilin, a neuronal PP1 regulator, is entirely unstructured in its unbound form, and it binds PP1 through a folding-upon-binding mechanism in an elongated fashion, blocking one of PP1's three putative substrate binding sites without altering its active site. This mode of binding is sufficient for spinophilin to restrict PP1's activity toward a model substrate in vitro without affecting its ability to dephosphorylate its neuronal substrate, glutamate receptor 1 (GluR1). Thus, our work provides the molecular basis for the ability of spinophilin to dictate PP1 substrate specificity.

59 BASIC BIOLOGICAL SCIENCES↗

Structural Analysis of Semi-specific Oligosaccharide Recognition by a Cellulose-binding Protein of Thermotoga maritima Reveals Adaptations for Functional Diversification of the Oligopeptide Periplasmic Binding Protein Fold

Periplasmic binding proteins (PBPs) constitute a protein superfamily that binds a wide variety of ligands. In prokaryotes, PBPs function as receptors for ATP-binding cassette or tripartite ATP-independent transporters and chemotaxis systems. In many instances, PBPs bind their cognate ligands with exquisite specificity, distinguishing, for example, between sugar epimers or structurally similar anions. By contrast, oligopeptide-binding proteins bind their ligands through interactions with the peptide backbone but do not distinguish between different side chains. The extremophile Thermotoga maritima possesses a remarkable array of carbohydrate-processing metabolic systems, including the hydrolysis of cellulosic polymers. Here, we present the crystal structure of a T. maritima cellobiose-binding protein (tm0031) that is homologous to oligopeptide-binding proteins. T. maritima cellobiose-binding protein binds a variety of lengths of {beta}(1 {yields} 4)-linked glucose oligomers, ranging from two rings (cellobiose) to five (cellopentaose). The structure reveals that binding is semi-specific. The disaccharide at the nonreducing end binds specifically; the other rings are located in a large solvent-filled groove, where the reducing end makes several contacts with the protein, thereby imposing an upper limit of the oligosaccharides that are recognized. Semi-specific recognition, in which a molecular class rather than individual species is selected, provides an efficient solution for the uptake of complex mixtures.

36 MATERIALS SCIENCE↗

The Structure and Function of an Arabinan-specific [alpha]-1,2-Arabinofuranosidase Identified from Screening the Activities of Bacterial GH43 Glycoside Hydrolases

Reflecting the diverse chemistry of plant cell walls, microorganisms that degrade these composite structures synthesize an array of glycoside hydrolases. These enzymes are organized into sequence-, mechanism-, and structure-based families. Genomic data have shown that several organisms that degrade the plant cell wall contain a large number of genes encoding family 43 (GH43) glycoside hydrolases. Here we report the biochemical properties of the GH43 enzymes of a saprophytic soil bacterium, Cellvibrio japonicus, and a human colonic symbiont, Bacteroides thetaiotaomicron. The data show that C. japonicus uses predominantly exo-acting enzymes to degrade arabinan into arabinose, whereas B. thetaiotaomicron deploys a combination of endo- and side chain-cleaving glycoside hydrolases. Both organisms, however, utilize an arabinan-specific {alpha}-1,2-arabinofuranosidase in the degradative process, an activity that has not previously been reported. The enzyme can cleave {alpha}-1,2-arabinofuranose decorations in single or double substitutions, the latter being recalcitrant to the action of other arabinofuranosidases. The crystal structure of the C. japonicus arabinan-specific {alpha}-1,2-arabinofuranosidase, CjAbf43A, displays a five-bladed {beta}-propeller fold. The specificity of the enzyme for arabinan is conferred by a surface cleft that is complementary to the helical backbone of the polysaccharide. The specificity of CjAbf43A for {alpha}-1,2-L-arabinofuranose side chains is conferred by a polar residue that orientates the arabinan backbone such that O2 arabinose decorations are directed into the active site pocket. A shelflike structure adjacent to the active site pocket accommodates O3 arabinose side chains, explaining how the enzyme can target O2 linkages that are components of single or double substitutions.

54 ENVIRONMENTAL SCIENCES↗