Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Mass flow rate effect on a rotating detonation combustor with an axial air injection

Changing the flow rate of reactants being injected into a rotating detonation combustor (RDC) results in interesting behavior of the system. Prior studies have found that an increase in mass flow rate gradually increases the detonation wave speed before splitting the wave into multiple fronts. Here, the focus of this study is in understanding the physics of such behavior through a combination of experiments and numerical simulations. For this purpose, the axial air inlet-based RDC geometry is used. In the experiments, the wave velocity increased similar to prior studies. Corresponding full-scale simulations show that increase in mass flow rate by increasing pressure of the feed plenums shortens the recovery time of the injectors. This causes a more uniform fuel–air mixture to form prior to the arrival of the detonation wave. As a result, a more ideal detonation is observed, which leads to an increased wave velocity. Details of the detonation structure and variation with mass flow rate are analyzed. The presence and variation of the different deflagration zones in such non-premixed RDCs are also discussed.

42 ENGINEERING↗

Observation of Magnetic Phase Transition and Magnetocaloric Effect in Ba{sub 1−x}Sr{sub x}MnO{sub 3−δ}

A series of perovskite materials (BaMnO{sub 3−δ} and Ba{sub 1−x}Sr{sub x}MnO{sub 3}) were synthesized by a solid-state reaction method. The content of oxygen vacancy can be controlled by verifying the sintering temperature and atmosphere. Two obvious divarications between zero-field-cooling curves and field-cooling curves were observed in a high-temperature region of 250–300 K and at a low temperature of 40 K, respectively. It is found that the different oxygen vacancy contents in BaMnO{sub 3−δ} cause the change of crystalline structure and variation of the divarication temperature at a high-temperature region. The factor that controls the negative magnetic susceptibility was discussed. The superexchange interaction between Mn ions can give rise to the coexistence of the ferromagnetic phase and antiferromagnetic phase in the system. We further performed the study of magnetocaloric effect in Sr-doped BaMnO{sub 3}. However, the values of magnetic entropy change and refrigeration coefficient are much smaller than those of rare-earth manganites due to the weak magnetocrystalline anisotropy in Ba{sub 1−x}Sr{sub x}MnO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sequestration of cerium(III) bromide into mesoporous silica

In this study, a variety of surface-functionalized mesoporous silica monoliths were reacted with a cerium(III) bromide molecular complex and a successful scaffold for luminescent materials is demonstrated. The variation in structure of the materials is shown through infrared spectroscopy, and the luminescent properties illustrate the varying coordination environment of cerium(III) bromide.

36 MATERIALS SCIENCE↗

Visible and near-infrared excitation spectra from the neptunyl ion doped into a uranyl tetrachloride lattice

We present that visible and near-infrared illumination induces 5f-5f and ligand-to-metal charge-transfer (LMCT) transitions of the neptunyl tetrachloride anion in polycrystalline Cs 2 U(Np)O 2 Cl 4 , and results in near-infrared luminescence from the second electronically excited state to the ground state. This photoluminescence is used as a detection method to collect excitation spectra throughout the near-infrared and visible regions. The excitation spectra of LMCT transitions in excitation spectra were identified in previous work. Here the measurement and analysis is extended to include both LMCT and intra-5f transitions. The results manifest variation in structural properties of the neptunium-oxo bond among the low-lying electronic states. Vibronic intensity patterns and energy spacings are used to compare bond lengths and vibrational frequencies in the excited states, confirming significant characteristic differences between those excited by 5f-5f transitions from those due to LMCT transitions. Lastly, results are compared with recently published RASPT2/SO calculations of [NpO 2 Cl 4 ] 2- .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A High Energy X-ray Diffraction Study of Amorphous Indomethacin

Amorphous pharmaceuticals often possess a wide range of molecular conformations and bonding arrangements. The x-ray pair distribution function (PDF) method is a powerful technique for the characterization of variations in both intra-molecular and inter-molecular packing arrangements. Here, the x-ray PDF of amorphous Indomethacin is shown to be particularly sensitive to the preferred orientations of the chlorobenzyl ring found in isomers in the crystalline state. In some cases, the chlorobenzyl ring has no preferred torsional angle in the amorphous form, while in others evidence of distinct isomer orientations are observed. Amorphous samples with no preferred torsion angles of the chlorobenzyl ring are found to favor enhanced inter-molecular hydrogen bonding, and this is reflected in the intensity of the first sharp diffraction peak. These significant variations in structure rule out amorphous Indomethacin as a possible standard for x-ray PDF measurements. At high humidity, time resolved PDF's for >40 h reveal water molecules forming hydrogen bonds with Indomethacin molecules. Finally, a simple linear hydrogen bond model indicates that water molecules in the wet amorphous form have similar hydrogen bond strengths to those found between Indomethacin dimers or chains in the dry amorphous form.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Persistent Protein Motions in a Rugged Energy Landscape Revealed by Normal Mode Ensemble Analysis

Proteins are allosteric machines that couple motions at distinct, often distant, sites to control biological function. Low-frequency structural vibrations are a mechanism of this long-distance connection and are often used computationally to predict correlations, but experimentally identifying the vibrations associated with specific motions has proved challenging. Spectroscopy is an ideal tool to explore these excitations, but measurements have been largely unable to identify important frequency bands. The result is at odds with some previous calculations and raises the question what methods could successfully characterize protein structural vibrations. Here we show the lack of spectral structure arises in part from the variations in protein structure as the protein samples the energy landscape. However, by averaging over the energy landscape as sampled using an aggregate 18.5 μs of all-atom molecular dynamics simulation of hen egg white lysozyme and normal-mode analyses, we find vibrations with large overlap with functional displacements are surprisingly concentrated in narrow frequency bands. These bands are not apparent in either the ensemble averaged vibrational density of states or isotropic absorption. However, in the case of the ensemble averaged anisotropic absorption, there is persistent spectral structure and overlap between this structure and the functional displacement frequency bands. We systematically lay out heuristics for calculating the spectra robustly, including the need for statistical sampling of the protein and inclusion of adequate water in the spectral calculation. The results show the congested spectrum of these complex molecules obscures important frequency bands associated with function and reveal a method to overcome this congestion by combining structurally sensitive spectroscopy with robust normal mode ensemble analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CHARMM-GUI Membrane Builder for Complex Biological Membrane Simulations with Glycolipids and Lipoglycans

Glycolipids (such as glycoglycerolipids, glycosphingolipids, and glycosylphosphatidylinositol) and lipoglycans (such as lipopolysaccharides (LPS), lipooligosaccharides (LOS), mycobacterial lipoarabinomannan, and mycoplasma lipoglycans) are typically found on the surface of cell membranes and play crucial roles in various cellular functions. Characterizing their structure and dynamics at the molecular level is essential to understand their biological roles, but systematic generation of glycolipid and lipoglycan structures is challenging because of great variations in lipid structures and glycan sequences (i.e., carbohydrate types and their linkages). To facilitate the generation of all-atom glycolipid/LPS/LOS structures, we have developed Glycolipid Modeler and LPS Modeler in CHARMM-GUI (http://www.charmm-gui.org), a web-based interface that simplifies building of complex biological simulation systems. In addition, we have incorporated these modules into Membrane Builder so that users can readily build a complex symmetric or asymmetric biological membrane system with various glycolipids and LPS/LOS. These tools are expected to be useful in innovative and novel glycolipid/LPS/LOS modeling and simulation research by easing tedious and intricate steps in modeling complex biological systems and shall provide insight into structures, dynamics, and underlying mechanisms of complex glycolipid-/LPS-/LOS-containing biological membrane systems.

Lee, Jumin↗

Data-Driven Refinement of Electronic Energies from Two-Electron Reduced-Density-Matrix Theory

The exponential computational cost of describing strongly correlated electrons can be mitigated by adopting a reduced-density-matrix (RDM)-based description of the electronic structure. While variational two-electron RDM (v2RDM) methods can enable large-scale calculations on such systems, the quality of the solution is limited by the fact that only a subset of known necessary N-representability constraints can be applied to the 2RDM in practical calculations. Here, we demonstrate that violations of partial three-particle (T1 and T2) N-representability conditions, which can be evaluated with knowledge of only the 2RDM, can serve as physics-based features in a machine-learning (ML) protocol for improving energies from v2RDM calculations that consider only two-particle (PQG) conditions. Proof-of-principle calculations demonstrate that the model yields substantially improved energies, relative to reference values from configuration-interaction-based calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nutrient Dynamics in a Coupled Terrestrial Biosphere and Land Model (ELM-FATES-CNP)

We present a representation of nitrogen and phosphorus cycling in the Functionally Assembled Terrestrial Ecosystem Simulator, a demographic vegetation model within the Energy Exascale Earth System land model. This representation is modular, and designed to allow testing of multiple hypothetical approaches for carbon-nutrient coupling in plants. Novel model hypotheses introduced in this work include, (a) the controls on plant acquisition of aqueous mineralized nutrients in the soil and (b) fairly straight forward methods of allocating nutrients to specific plant organs and their losses through live plant turnover as well as litter fluxes generated through plant mortality. This combines the new with pre-existing hypotheses (such as nitrogen fixation and soil decomposition) into a system that can accommodate plant-soil dynamics for a large number of size- and functional-type-resolved plant cohorts within a time-since-disturbance-resolved ecosystem. Root uptake of nutrients is governed by fine root biomass, and plants vary in their fine root biomass allocation in order to balance carbon and nutrient limitations to growth. We test the sensitivity of the model to a wide range of parameter variations and structural representations, and in the context of observations at Barro Colorado Island, Panama. A key model prediction is that plants in the high-light-availability canopy positions allocate more carbon to fine roots than plants in low-light understory environments, given the widely different carbon versus nutrient constraints of these two niches within a given ecosystem. This model provides a basis for exploring carbon-nutrient coupling with vegetation demography within Earth system models.

54 ENVIRONMENTAL SCIENCES↗

Designing tensile ductility in metallic glasses

Effectiveness of a second phase in metallic glass heterostructures to improve mechanical properties varies widely. Unfortunately, methods to fabricate such heterostructures like foams and composites do not allow controlled variation of structural features. Here we report a novel strategy, which allows us to vary heterostructural features independently, thereby enabling a systematic and quantitative study. Our approach reveals the optimal microstructural architecture for metallic glass heterostructures to achieve tensile ductility. Critical design aspect is a soft second phase, which is most effective when spacing between the second phase assumes the critical crack length of the metallic glass. This spacing should coincide with the second phase’s size, and beyond, the specific second phase morphology of the heterostructure is crucial. These toughening strategies are only effective in samples that are large compared with the spacing of the second phase. The identified design aspects provide guidance in designing tensile ductility into metallic glasses.

36 MATERIALS SCIENCE↗

CryoEM reveals the stochastic nature of individual ATP binding events in a group II chaperonin

Chaperonins are homo- or hetero-oligomeric complexes that use ATP binding and hydrolysis to facilitate protein folding. ATP hydrolysis exhibits both positive and negative cooperativity. The mechanism by which chaperonins coordinate ATP utilization in their multiple subunits remains unclear. Here we use cryoEM to study ATP binding in the homo-oligomeric archaeal chaperonin from Methanococcus maripaludis (MmCpn), consisting of two stacked rings composed of eight identical subunits each. Using a series of image classification steps, we obtained different structural snapshots of individual chaperonins undergoing the nucleotide binding process. We identified nucleotide-bound and free states of individual subunits in each chaperonin, allowing us to determine the ATP occupancy state of each MmCpn particle. We observe distinctive tertiary and quaternary structures reflecting variations in nucleotide occupancy and subunit conformations in each chaperonin complex. Detailed analysis of the nucleotide distribution in each MmCpn complex indicates that individual ATP binding events occur in a statistically random manner for MmCpn, both within and across the rings. Our findings illustrate the power of cryoEM to characterize a biochemical property of multi-subunit ligand binding cooperativity at the individual particle level.

59 BASIC BIOLOGICAL SCIENCES↗

Soft X-ray tomography reveals variations in B. subtilis biofilm structure upon tasA deletion

Bacterial biofilms are complex cell communities within a self-produced extracellular matrix, crucial in various fields but challenging to analyze in 3D. We developed a "biofilm-in-capillary" growth method compatible with full-rotation soft X-ray tomography, enabling high-resolution 3D imaging of bacterial cells and their matrix during biofilm formation. This approach offers 50 nm isotropic spatial resolution, rapid imaging, and quantitative native analysis of biofilm structure. Using Bacillus subtilis biofilms, we detected coherent alignment and chaining of wild-type cells towards the oxygen-rich capillary tip. In contrast, the ΔtasA genetic knock-out showed a loss of cellular orientation and changes in the extracellular matrix. Adding TasA protein to the ΔtasA strain restored matrix density and led to cell assembly compaction, but without the chaining observed in wild-type biofilms. This scalable and transferable approach opens new avenues for examining biofilm structure and function across various species, including mixed biofilms, and response to genetic and environmental factors.

59 BASIC BIOLOGICAL SCIENCES↗

Petschek reconnection with a nonlocalized resistivity

The impact of using a nonlocalized electrical resistivity having a spatially asymmetric profile is considered on two-dimensional steady-state magnetic reconnection. Starting from an initial Harris current sheet, time-dependent magnetohydrodynamic simulations are carried out over an entire spatial domain without any symmetry assumptions. It is shown that a stationary Petschek-like reconnection is obtained in the half-plane where a uniform resistivity is adopted. The latter configuration is maintained by a coexisting Petschek configuration that is formed in the second half-plane where the resistivity exhibits a classical exponentially decreasing variation. The structure of the central diffusion region is asymmetric, with a stagnation point flow which does not coincide with the X-point. These results suggest conditions under which a Petschek solution can indeed exist in the presence of a small uniform resistivity in the whole domain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Irradiation induced modification in transport properties of LaNiO{sub 3} thin films: An x-ray absorption study

Highly c-axis oriented LaNiO{sub 3} thin films are grown on LaAlO{sub 3} (001) single crystal substrates using rf-magnetron sputtering. Swift heavy ion irradiation induced variations in structural and electrical transport properties of deposited films are studied. Pristine film shows unusual insulating character while the irradiated film exhibits metallic behaviour. X-ray diffraction study indicates that irradiation improves the crystalline character of films while retaining the oriented single phase growth. Electronic structure measurements performed using x-ray absorption spectroscopy at O K, La M{sub 5,4}, and Ni L{sub 3,2}-edges reveal that Ni-O hybridization-controlled localization of charge carriers is responsible for the observed transport behaviour.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An apparatus for studying scintillator properties at high isostatic pressures

We describe the design and operation of a unique hydraulic press for the study of scintillator materials under isostatic pressure. This press, capable of developing a pressure of a gigapascal, consists of a large sample chamber pressurized by a two-stage hydraulic amplifier. The optical detection of the scintillation light emitted by the sample is performed, through a large aperture optical port, by a photodetector located outside the pressure vessel. In addition to providing essential pressure-dependent studies on the emission characteristics of radioluminescent materials, this apparatus is being developed to elucidate the mechanisms behind the recently observed dependency of light-yield nonproportionality on electronic band structure. The variation of the light output of a Tl:CsI crystal under 511-keV gamma excitation and hydrostatic pressure is given as an example.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗