SEARCH · Search NASA

Results for “THEORIES - AIRFOILS - CASCADES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Does nucleation theory apply to the formation of refractory circumstellar grains?

It is pointed out that kinetic factors inherent in cosmic systems will prevent the attainment of an approximate equilibrium precondensation cluster distribution, and that therefore such systems will violate one of the most fundamental assumptions of nucleation theory. More importantly, it is shown that of the 11 refractory metal/metal oxide systems which have been studied experimentally none are consistent with the predictions of either classical nucleation theory or the Lothe-Pound modification. Since no valid method is known by which these deficiencies can be circumvented, it is concluded that nucleation theory cannot be made to work in expanding circumstellar shells. However, a stochastic, kinetic treatment which makes use of experimental and theoretical data for specific refractory systems does appear to be feasible.

Donn, B.↗

NASA NTRS1984

Dust in magnetised plasmas - Basic theory and some applications

In this paper the theory of charged test particle motion in magnetic fields is reviewed. This theory is then extended to charged dust particles, for which gravity and charge fluctuations play an important role. It is shown that systematic drifts perpendicular to the magnetic field and stochastic transport effects may then have to be considered none of which occur in the case of atomic particles (with the exception of charge exchange reactions). Some applications of charged dust particle transport theory to planetary rings are then briefly discussed.

Northrop, T. G.↗

NASA NTRS1985

A higher-order shear deformation theory of laminated elastic shells

A higher-order shear deformation theory of elastic shells is developed for shells laminated of orthotropic layers. The theory is a modification of the Sanders' theory and accounts for parabolic distribution of the transverse shear strains through thickness of the shell and tangential stress-free boundary conditions on the boundary surfaces of the shell. The Navier-type exact solutions for bending and natural vibration are presented for cylindrical and spherical shells under simply supported boundary conditions.

Reddy, J. N.↗

NASA NTRS1984

Cell symbiosis theory - Status and implications for the fossil record

Smith (1981) has presented three alternative models of the origin of eukaryotes. In the present investigation, alternative theories are discussed along with the status of serial endosymbiotic theory. It is pointed out that the usefulness of the serial endosymbiotic theory is attested by the great flourishing of productive scientific studies it has generated. Attention is given to the origin of mitochondria and plastids from free-living bacteria, the polyphyly of mitochondria, the origin of the nuclear membrane, the origin of undulipodia (cilia and other 9 + 2 organelles), the sequence of acquisition of organelles, large ribosomes, genome organization, animals and plants, and systematics and axonomy of the microorganisms.

Margulis, L.↗

NASA NTRS1985

A beam theory for anisotropic materials

Beam theory plays an important role in structural analysis. The basic assumption is that initially plane sections remain plane after deformation, neglecting out-of-plane warpings. Predictions based on these assumptions are accurate for slender, solid, cross-sectional beams made out of isotropic materials. The beam theory derived in this paper from variational principles is based on the sole kinematic assumption that each section is infinitely rigid in its own plane, but free to warp out of plane. After a short review of the Bernoulli and Saint-Venant approaches to beam theory, a set of orthonormal eigenwarpings is derived. Improved solutions can be obtained by expanding the axial displacements or axial stress distribution in series of eigenwarpings and using energy principles to derive the governing equations. The improved Saint-Venant approach leads to fast converging solutions and accurate results are obtained considering only a few eigenwarping terms.

Bauchau, O. A.↗

NASA NTRS1985

Theory of microwave remote sensing

Active and passive microwave remote sensing of earth terrains is studied. Electromagnetic wave scattering and emission from stratified media and rough surfaces are considered with particular application to the remote sensing of soil moisture. Radiative transfer theory for both the random and discrete scatterer models is examined. Vector radiative transfer equations for nonspherical particles are developed for both active and passive remote sensing. Single and multiple scattering solutions are illustrated with applications to remote sensing problems. Analytical wave theory using the Dyson and Bethe-Salpeter equations is employed to treat scattering by random media. The backscattering enhancement effects, strong permittivity fluctuation theory, and modified radiative transfer equations are addressed. The electromagnetic wave scattering from a dense distribution of discrete scatterers is studied. The effective propagation constants and backscattering coefficients are calculated and illustrated for dense media.

Tsang, L.↗

NASA NTRS1985

The nondetection of continuum radiation from Comet IRAS-Araki-Alcock (1983d) at 2- to 6-cm wavelengths and its implication on the icy-grain halo theory

The Comet IRAS-Araki-Alcock was observed with the VLA at 6 and 2 cm, when the comet was at geocentric distances of 0.08 and 0.035 AU, respectively, and the results are discussed. The three sigma upper limits to the flux density are 90 and 750 micro-Jy at the two wavelengths, respectively, values fully two orders of magnitude below the flux densities predicted by the icy-grain halo theory as initially developed. The corrected theory also indicates that the icy grain halo theory does not give an adequate description of the cometary environment. It is shown that the halo is either very optically thin, with a filling factor of the order of 10 to the -5th, or that the maximum size of the grain that can be lifted off the nuclear surface is only of the order of 10-100 microns.

De Pater, I.↗

NASA NTRS1985

A unified theory of coronal heating

Solar coronal heating mechanisms are analyzed within the framework of a unified theory of heating processes. The theory is based on the standing wave equation of Ionson (1982) for the global current driven by emfs from the convection Beta less than 1. The equation has the same form as a driven LRC equation in which the equivalent inductance is scaled with the coronal loop length. The theory is used to classify various heating mechanisms inside the coronal loops. It is shown that the total global current can be obtained from an integration of the local currents, the degree of coherency between local currents being the dominant factor governing the global current amplitude. Active region loops appear to be heated by electrodynamic coupling to p-mode oscillations in the convection Beta less than 1.

Ionson, J. A.↗

NASA NTRS1985

Unsteady lifting-line theory as a singular-perturbation problem

Unsteady lifting-line theory is developed for a wing of large aspect ratio oscillating at low frequency in inviscid incompressible flow. The wing is assumed to have a rigid chord but a flexible span. Use of the method of matched asymptotic expansions reduces the problem from a singular integral equation to quadrature. The pressure field and airloads, for a prescribed wing shape and motion, are obtained in closed form as expansions in inverse aspect ratio. A rigorous definition of unsteady induced downwash is also obtained. Numerical calculations are presented for an elliptic wing in pitch and heave; compared with numerical lifting-surface theory, computation time is reduced significantly. The present work also identifies and resolves errors in the unsteady lifting line theory of James (1975), and points out a limitation in that of Van Holten (1975, 1976, 1977).

Ahmadi, A.↗

NASA NTRS1985

The application of diffusion theory to the analysis of hydrogen desorption data at 25 deg C

The application of diffusion theory to the analysis of hydrogen desorption data (coulombs of H2 desorbed versus time) has been studied. From these analyses, important information concerning hydrogen solubilities and the nature of the hydrogen distributions in the metal has been obtained. Two nickel base alloys, Rene' 41 and Waspaloy, and one ferrous alloy, 4340 steel, are studied in this work. For the nickel base alloys, it is found that the hydrogen distributions after electrolytic charging conforms closely to those which would be predicted by diffusion theory. For Waspaloy samples charged at 5,000 psi, it is found that the hydrogen distributions are essentially the same as those obtained by electrolytic charging. The hydrogen distributions in electrolytically charged 4340 steel, on the other hand, are essentially uniform in nature, which would not be predicted by diffusion theory. A possible explanation has been proposed. Finally, it is found that the hydrogen desorption is completely explained by the nature of the hydrogen distribution in the metal, and that the fast hydrogen is not due to surface and sub-surface hydride formation, as was originally proposed.

Danford, M. D.↗

NASA NTRS1984

An E-plane analysis of aperture-matched horn antennas using the moment method and the uniform geometrical theory of diffraction

The moment method and the uniform geometrical theory of diffraction are utilized to obtain two separate solutions for the E-plane field pattern of an aperture-matched horn antenna. This particular horn antenna consists of a standard pyramidal horn with the following modifications: a rolled edge section attached to the aperture edges and a curved throat section. The resulting geometry provides significantly better performance in terms of the pattern, impedance, and frequency characteristics than normally obtainable. The moment method is used to calculate the E-plane pattern and BSWR of the antenna. However, at higher frequencies, large amounts of computation time are required. The uniform geometrical theory of diffraction provides a quick and efficient high frequency solution for the E-plane field pattern. In fact, the uniform geometrical theory of diffraction may be used to initially design the antenna; then, the moment method may be applied to fine tune the design. This procedure has been successfully applied to a compact range feed design.

Heedy, D. J.↗

NASA NTRS1986

Theory of plasma contractors for electrodynamic tethered satellite systems

Recent data from ground and space experiments indicate that plasma releases from an object dramatically reduce the sheath impedance between the object and the ambient plasma surrounding it. Available data is in qualitative accord with the theory developed to quantify the flow of current in the sheath. Electron transport in the theory is based on a fluid model of a collisionless plasma with an effective collision frequency comparable to frequencies of plasma oscillations. The theory leads to low effective impedances varying inversely with the square root of the injected plasma density. To support such a low impedance mode of operation using an argon plasma source for example requires that only one argon ion be injected for each thirty electrons extracted from the ambient plasma. The required plasma flow rates are quite low; to extract one ampere of electron current requires a mass flow rate of about one gram of argon per day.

Parks, D. E.↗

NASA NTRS1986

Semi-analytical theory for long-term rotational motion of uncontrolled satellites

Analytical solutions/integrals of the free rotational motion of uncontrolled satellites which contain spinning rotors are employed in conjunction with a suitable analytical/numerical averaging approach to predict long-term attitude motion. This semi-analytical method of averaging is basically similar to the one used in purely analytical 'general perturbation' theories. However, in view of the complexities involved in analytical treatment of the problem, its application is primarily numerical in character. An example is presented illustrating the use of the theory to predict the attitude motion of an axisymmetric satellite containing symmetrical constant-speed rotors under gravity-gradient torque. The use of the theory is considerably more efficient than straightforward numerical integration of the complete set of equations of motion.

Lahr, B. S.↗

NASA NTRS1986

Toward comparing experiment and theory for corroborative research on hingeless rotor stability in forward flight (an experimental and analytical investigation of isolated rotor-flap-lag stability in forward flight)

For flap-lag stability of isolated rotors, experimental and analytical investigations are conducted in hover and forward flight on the adequacy of a linear quasisteady aerodynamics theory with dynamic inflow. Forward flight effects on lag regressing mode are emphasized. Accordingly, a soft inplane hingeless rotor with three blades is tested at advance ratios as high as 0.55 and at shaft angles as high as 20 degrees. The 1.62 m model rotor is untrimmed with an essentially unrestricted tilt of the tip path plane. In combination with lag natural frequencies, collective pitch settings and flap-lag coupling parameters, the data base comprises nearly 1200 test points (damping and frequency) in forward flight and 200 test points in hover. By computerized symbolic manipulation, a linear analytical model is developed in substall to predict stability margins with mode identificaton. To help explain the correlation between theory and data it also predicts substall and stall regions of the rotor disk from equilibrium values. The correlation shows both the strengthts and weaknesses of the theory in substall.

Gaonkar, G.↗

NASA NTRS1986

A viscoplastic constitutive theory for metal matrix composites at high temperature

A viscoplastic constitutive theory is presented for representing the high-temperature deformation behavior of metal matrix composites. The point of view taken is a continuum one where the composite is considered a material in its own right, with its own properties that can be determined for the composite as a whole. It is assumed that a single preferential (fiber) direction is identifiable at each material point (continuum element) admitting the idealization of local transverse isotropy. A key ingredient in this work is the specification of an experimental program for the complete determination of the material functions and parameters for characterizing a particular metal matrix composite. The parameters relating to the strength of anisotropy can be determined through tension/torsion tests on longitudinally and circumferentially reinforced thin-walled tubes. Fundamental aspects of the theory are explored through a geometric interpretation of some basic features analogous to those of the classical theory of plasticity.

Robinson, D. N.↗

NASA NTRS1987

Applicability of linearized-theory attached-flow methods to design and analysis of flap systems at low speeds for thin swept wings with sharp leading edges

Low-speed experimental force and data on a series of thin swept wings with sharp leading edges and leading and trailing-edge flaps are compared with predictions made using a linearized-theory method which includes estimates of vortex forces. These comparisons were made to assess the effectiveness of linearized-theory methods for use in the design and analysis of flap systems in subsonic flow. Results demonstrate that linearized-theory, attached-flow methods (with approximate representation of vortex forces) can form the basis of a rational system for flap design and analysis. Even attached-flow methods that do not take vortex forces into account can be used for the selection of optimized flap-system geometry, but design-point performance levels tend to be underestimated unless vortex forces are included. Illustrative examples of the use of these methods in the design of efficient low-speed flap systems are included.

Carlson, Harry W.↗

NASA NTRS1986

Wave packets and WKB theory in phase space

A practical difficulty of traditional Wentzel-Kramer-Brillouin (WKB) theory is that it suffers from non-physical infinities at caustics. A theoretical difficulty is that it does not possess any reasonable covariance or invariance properties under transformations in phase space. It turns out that the solution of one of these problems also solves the other, and leads to a version of WKB theory in phase space. The new theory is most easily implemented by using wave packets.

Littlejohn, Robert G.↗

NASA NTRS1987

Toward comparing experiment and theory for corroborative research on hingeless rotor stability in forward flight

For flap lag stability of isolated rotors, experimental and analytical investigations were conducted in hover and forward flight on the adequacy of a linear quasisteady aerodynamics theory with dynamic flow. Forward flight effects on lag regressing mode were emphasized. A soft inplane hingeless rotor with three blades was tested at advance ratios as high as 0.55 and at shaft angles as high as 20 deg. The 1.62 m model rotor was untrimmed with an essentially unrestricted tilt of the tip path plane. In combination with lag natural frequencies, collective pitch settings and flap lag coupling parameters, the data base comprises nearly 1200 test points (damping and frequency) in forward flight and 200 test points in hover. By computerized symbolic manipulation, a linear model was developed in substall to predict stability margins with mode identification. To help explain the correlation between theory and data it also predicted substall and stall regions of the rotor disk from equilibrium values. The correlation showed both the strengths and weaknesses of the theory in substall ((angle of attack) equal to or less than 12 deg).

Gaonkar, G.↗