Search NASA⌕ Search

SEARCH · Search NASA

Results for “TURBIDITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Production of impact melt in craters on Venus, Earth, and the moon

Impact craters imaged by Magellan clearly show large amounts of flow-like ejecta whose morphology suggests that the flows comprise low-viscosity material. It was suggested that this material may be either turbidity flows or very fine-grained ejecta, flows of ejecta plus magma, or impact melts. The last of these hypotheses is considered. If these flows are composed of impact melts, there is much more melt relative to the crater volume than is observed on the moon. The ANEOS equation of state program was used for dunite to estimate the shock pressures required for melting, with initial conditions appropriate for Venus, Earth, and the moon. A simple model was then developed, based on the Z-model for excavation flow and on crater scaling relations that allow to estimate the ratio of melt ejecta to total ejecta as a function of crater size on the three bodies.

Vickery, A. M.↗

NASA/ASEE Summer Faculty Fellowship Program. 1991 Research Reports

Reports from the NASA/ASEE Summer Faculty Fellowship Program are presented. The editors are responsible for selecting appropriately qualified faculty to address some of the many problems of current interest to NASA Kennedy. Some representative titles are as follows: Development of an Accelerated Test Method for the Determination of Susceptibility to Atmospheric Corrosion; Hazardous Gas Leak Analysis in the Space Shuttle; Modeling and Control of the Automated Radiator Inspection Device; Study of the Finite Element Software Packages at KSC; Multispectral Image Processing for Plants; Algorithms for Contours Depicting Static Electric Fields during Adverse Weather Conditions; Transient Study of a Cryogenic Hydrogen Filling System; and Precision Cleaning Verification of Nonvolatile Residues by using Water, Ultrasonics, and Turbidity Analyses.

Hosler, E. Ramon↗

Laser Remote Sensing of Pollution on Water Surfaces

One of the most important problems of modern environmental science is the detection and identification of various impurities in the ocean. Sources of impurities in sea water are diverse. The most common of them are accidental transport, agricultural, and oil industry spills. Once the ecological balance is disturbed, biological processes in sea water become affected, resulting in changes in chlorophyll concentrations, water turbidity, and temperature. During the last few years, we have created new types of lidars and arranged nearly ten aircraft and shipboard expeditions. Some aircraft expeditions dealt with terrestrial investigations. Others were devoted to oceanological research, the results of which are discussed here. Emphasis is on the detection of phytoplankton chlorophyll and hydrocarbon in sea water.

Bunkin, A. F.↗

A comparison of lidar inversion methods for cirrus applications

Several methods for inverting the lidar equation are suggested as means to derive the cirrus optical properties (beta backscatter, alpha extinction coefficients, and delta optical depth) at one wavelength. The lidar equation can be inverted in a linear or logarithmic form; either solution assumes a linear relationship: beta = kappa(alpha), where kappa is the lidar ratio. A number of problems prevent us from calculating alpha (or beta) with a good accuracy. Some of these are as follows: (1) the multiple scattering effect (most authors neglect it); (2) an absolute calibration of the lidar system (difficult and sometimes not possible); (3) lack of accuracy on the lidar ratio k (taken as constant, but in fact it varies with range and cloud species); and (4) the determination of boundary condition for logarithmic solution which depends on signal to noise ration (SNR) at cloud top. An inversion in a linear form needs an absolute calibration of the system. In practice one uses molecular backscattering below the cloud to calibrate the system. This method is not permanent because the lower atmosphere turbidity is variable. For a logarithmic solution, a reference extinction coefficient (alpha(sub f)) at cloud top is required. Several methods to determine alpha(sub f) were suggested. We tested these methods at low SNR. This led us to propose two new methods referenced as S1 and S2.

Elouragini, Salem↗

Dense fog on the highway: Visual range monitoring in cars?

This paper reports on the development of a new sensor. Laser range-finders are currently installed in cars and trucks to measure the distance to a proceeding car (LEICA). A modification of such a sensor to measure visibility was made. The problems that had to be solved were: (1) choice of wavelength with relation to the human eye for visibility measurements; (2) dependency of the wavelength on atmospheric turbidity; (3) laser eye-safety; and (4) influence of multiple scattering at visibilities smaller than 200 m. The wavelength used for lidar sensors in the near infrared presents no real problems because the object to be sensed is fog appearing white which means that scattering from fog is wavelength independent. There are however differences in backscatter-to-extinction ratio for different fog and weather situations. The two solutions to these problems are polarization and multiple scattering. As known from airport operations of a laser ceilometer, one can use this multiple scattering contribution to determine the visibility.

Hahn, W.↗

Radiative transfer model validations during the First ISLSCP Field Experiment

Two simple radiative transfer models, the 5S model based on Tanre et al. (1985, 1986) and the wide-band model of Morcrette (1984) are validated by comparing their outputs with results obtained during the First ISLSCP Field Experiment on concomitant radiosonde, aerosol turbidity, and radiation measurements and sky photographs. Results showed that the 5S model overestimates the short-wave irradiance by 13.2 W/sq m, whereas the Morcrette model underestimated the long-wave irradiance by 7.4 W/sq m.

Frouin, Robert↗

Photon interaction cross sections for aggregations of finite-dimensional leaves

The Ross (1981) plate turbid-medium theory, which abstracts the leaf canopy as a gaseous mixture of oriented planar nondimensional plates that are randomly distributed in the configuration space, does not account for the 'hot spot' effect typical of all layered media with finite-dimensional scattering centers. The concept of 'particle distribution functions' is presently used to derive the interaction cross sections. This formalism is statistical-mechanical in nature, since the radiative transfer equation is essentially a linearized form of the Boltzmann equation for N-body systems.

Myneni, Ranga B.↗

Determination of phytoplankton chlorophyll concentrations in the Chesapeake Bay with aircraft remote sensing

Remote sensing measurements of the distribution of phytoplankton chlorophyll concentrations in Chesapeake Bay during 1989 are described. It is shown that remote sensing from light aircraft can complement and extend measurements made from traditional platforms and provide data of improved temporal and spatial resolution, leading to a better understanding of phytoplankton dynamics in the estuary. The developments of the winter-spring diatom bloom in the polyhaline to mesohaline regions of the estuary and of the late-spring and summer dinoflagellate blooms in oligohaline and mesohaline regions are traced. The study presents the local chlorophyll algorithm developed using the NASA Ocean Data Acquisition System data and in situ chlorophyll data, interpolated maps of chlorophyll concentration generated by applying the algorithm to aircraft radiance data, ancillary in situ data on nutrients, turbidity, streamflow, and light availability, and an interpretation of phytoplankton dynamics in terms of the chlorophyll distribution in Chesapeake Bay during 1989.

Harding, Lawrence W., Jr.↗

Does the sedimentology of the Chelmsford formation provide evidence for a meteorite impact origin of the Sudbury structure?

The post-'event' fill of the Paleoproterozoic Sudbury Basin consists of at least 600 m of deep-water mudrocks of the Onwatin Formation, overlain by 850 m of lithic-arkosic muddy sandstones in the Chelmsford Formation. While mudstones of the Onwatin reflect deposition in a deep-water, anoxic setting, there is no clear evidence of local breccias, conglomerates, or sand bodies to support the concept that the basin was protected by the steep walls of an impact crater. Carbonates in the basal, Vermillion Member are of sedimentary exhalitive origin and were not derived from a shallow marine shelf. Turbidites in the Chelmsford Formation show no evidence of centripetal fill as might be expected from a restricted, circular basin. They appear to have been emplaced by predominantly southwesterly flowing turbidity currents, which showed little to no deflection along the depositional axis of an elongate foreland basin that developed in front of the rising Penokean mountain chain. While the presence of minor sandstone-filled fractures in parts of the Chelmsford Formation suggests the presence of north- or south-directed paleoslopes, no evidence is seen to support the existence of subbasins or a central uplift within the Sudbury Basin. While tilt-corrected paleocurrent orientations are ambiguous, due to postdepositional shortening of strata during cleavage development, strain correction of the observations makes little difference to the net, south-southwest-directed paleoflow.

Long, D. G. F.↗

Low Cost Dewatering of Waste Slurries

The U.S. Bureau of Mines has developed a technique for dewatering mineral waste slurries which utilizes polymer and a static screen. A variety of waste slurries from placer gold mines and crushed stone operations have been successfully treated using the system. Depending on the waste, a number of polymers have been used successfully with polymer costs ranging from $0.05 to $0.15 per 1,000 gal treated. The dewatering is accomplished using screens made from either ordinary window screen or wedge wire. The screens used are 8 ft wide and 8 ft long. The capacity of the screens varies from 3 to 7 gpm/sq. ft. The water produced is acceptable for recycling to the plant or for discharge to the environment. For example, a fine grain dolomite waste slurry produced from a crushed stone operation was dewatered from a nominal 2.5 pct solids to greater than 50 pct solids using $0.10 to $0.15 worth of polymer per 1,000 gal of slurry. The resulting waste water had a turbidity of less than 50 NTU and could be discharged or recycled. The paper describes field tests conducted using the polymer-screen dewatering system.

Peterson, J. B.↗

Microbiological and corrosion analysis of three urine pretreatment regimes with titanium 6A1-4V

One objective of the water recovery test (WRT) performed at NASA's Marshall Space Flight Center (MSFC) for the environmental control and life support systems (ECLSS) of Space Station Freedom is to determine the ability of the water recovery system to reclaim urine for crew reuse. In the process, raw urine is pretreated using a commercially available oxidant, Oxone (Dupont), and sulfuric acid (to reduce ammonia), and pumped into a urine processing subsystem. A combination of sodium hypochlorite and sulfuric acid were also considered as an alternative pretreatment. The ability of these pretreatments, plus a third pretreatment of ozone, to reduce microbial levels in urine generated during testing of the water recovery system at MSFC was examined. In addition, the corrosion rate of weld and base metal specimens of titanium 6A1-4V, a candidate material for the water system of Space Station Freedom, was monitored in the presence of these pretreatments. Specimen surfaces were examined at completion of the 21-day test using scanning electron microscopy. Change in pH, color, turbidity, and odor were recorded over the course of the test.

Huff, Timothy L.↗

The susceptibility critical exponent for a nonaqueous ionic binary mixture near a consolute point

We report turbidity measurements of a nonaqueous ionic solution of triethyl n-hexylammonium triethyl n-hexylboride in diphenyl ether. A classical susceptibility critical exponent gamma = 1.01 +/- 0.01 is obtained over the reduced temperature range t between values of 0.1 and 0.0001. The best fits of the sample transmission had a standard deviation of 0.39 percent over this range. Ising and spherical model critical exponents are firmly excluded. The correlation length amplitude xi sub 0 from fitting is 1.0 +/- 0.2 nm which is much larger than values found in neutral fluids and some aqueous binary mixtures.

Zhang, Kai C.↗

Astronaut observations of the Persian (Arabian) Gulf during STS-45

As a result of the 1991 Persian Gulf war, between mid-January and June 1991, the Persian Gulf was contaminated with an estimated 4 to 6 million barrels of crude oil, released directly into the Gulf from refinement facilities, transhipment terminals, and moored tankers along the coast of Kuwait, and precipitated from oil fire smoke plumes. To assess the environmental impact of the oil, an international team of marine scientists representing 14 nations was assembled under the auspices of the United Nations International Oceanic Commission and the Regional Organization for Protection of the Marine Environment to conduct detailed surveys of the Persian Gulf, the Strait of Hormuz, and the Gulf of Oman, including hydrographic, chemical, and biological measurements. To supplement the field surveys and to serve as an aid in data interpretation, astronauts aboard the Space Shuttle Atlantis photographed water features and coastal habitats in the Persian Gulf during mission STS-45 (24 March to 02 April 1992). The astronauts collected 111 hand-held, color photographs of the Gulf (72 70-mm photographs and 39 5-inch photographs) from an altitude of 296 km (160 n.mi.). The photographs reveal distributions in water turbidity associated with outflow from the Shatt-al-Arab and water circulation along the entire coast of Iran and the Strait of Hormuz, coastal wetlands and shallow-water habitats, and sticks appearing in the sunglint pattern, which appear to be oil.

Ackleson, Steven G.↗

Spectral vegetation indexes and the remote sensing of biophysical parameters

Combinations of remotely sensed data from different spectral bands have been combined into spectral vegetation indexes (SVIs) and used to determine biophysical parameters. The characteristics of two-band SVIs made up of visible and near-infrared reflectances are examined. Two canopy reflectance models, a turbid media model and a geometrical model, are used to study the effects of different canopy structures on the measurement of leaf area index and the fraction of photosynthetically intercepted active radiation.

Huemmrich, Karl F.↗

Effective UV radiation from model calculations and measurements

Model calculations have been made to simulate the effect of atmospheric ozone and geographical as well as meteorological parameters on solar UV radiation reaching the ground. Total ozone values as measured by Dobson spectrophotometer and Brewer spectrometer as well as turbidity were used as input to the model calculation. The performance of the model was tested by spectroradiometric measurements of solar global UV radiation at Potsdam. There are small differences that can be explained by the uncertainty of the measurements, by the uncertainty of input data to the model and by the uncertainty of the radiative transfer algorithms of the model itself. Some effects of solar radiation to the biosphere and to air chemistry are discussed. Model calculations and spectroradiometric measurements can be used to study variations of the effective radiation in space in space time. The comparability of action spectra and their uncertainties are also addressed.

Feister, Uwe↗

UV-observations with a Brewer spectrophotometer at Hohenpeissenberg

Regular spectral UV-B measurements with a Brewer spectrophotometer have been performed at Hohenpeissenberg since 1990. Intercomparison of the Brewer instrument with other UV-B monitoring devices have shown agreement to within plus or minus 10 percent. Comparisons of UV-B spectra measured on fair weather days reveal the well known increasing influence of ozone on UV-B irradiance with decreasing wavelengths. The integral amplification factor the erythemal irradiance reaches values up to 2.8, which can be diminished by increasing turbidity. The influence of cirrus cloud on the UV-B is also shown.

Vandersee, Winfried↗

An analytic radiative transfer model for a coupled atmosphere and leaf canopy

A new analytical radiative transfer model of a leaf canopy is developed that approximates multiple-scattering radiance by a four-stream formulation. The canopy model is coupled to a homogeneous atmospheric model as well as a non-Lambertian lower boundary soil surface. The same four-stream formulation is also used for the calculation of multiple scattering in the atmosphere. Comparisons of radiance derived from the four-stream model with those calculated by an iterative numerical solution of the radiative transfer equation show that the analytic model has a very high accuracy, even with a turbid atmosphere and a very dense canopy in which multiple scattering dominates. Because the coupling of canopy and atmospheric models fully accommodates anisotropic surface reflectance and atmospheric scattering and its effect on directional radiance, the model is especially useful for application to directional radiance and measurements obtained by remote sensing. Retrieval of biophysical parameters using this model is under investigation.

Liang, Shunlin↗

Marine optical characterizations

During the past three months, the MOCE Team conducted two field experiments in Mill Creek,Chesapeake Bay, from July 24 to August 4, and at the MOBY operations site at Snug Harbor, Honolulu, Hawaii, from August 15-30, prepared two technical memoranda, and continued MOCE-2 and MOCE-3 data reduction. The primary purposes of the experiments were to test the SeaWiFS 'remote sensing reflectance' protocol, obtain turbid water data for ocean color satellite algorithm development, perform calibration for both Near Infrared (NIR) and Visible Rainbow Spectrometer system, continue assembling the operational Marine Optical Buoy, and to test the MOBY cellular phone communications link at the Lanai mooring site.

Clark, Dennis K.↗