Search NASA⌕ Search

SEARCH · Search NASA

Results for “aquatic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Costs of mitigating the environmental impacts of hydropower projects in the United States

Developers are required to mitigate the environmental impacts of hydropower projects in the United States (U.S.) but there is very little accessible information on the associated costs. This work compiles and analyses a dataset of environmental impacts mitigation costs for 182 hydropower projects based on documents obtained from the U.S. Federal Energy Regulatory Commission (FERC). The analysis shows that environmental costs vary wildly across hydropower project classes and mitigation measures, even when normalized by plant capacity. Capital costs per kilowatt are generally higher for relicensed conventional hydropower plants, and lower for new and relicensed pumped storage hydropower plants, relative to other project classes. Smaller plants tend to spend a higher share of total project costs on mitigating environmental impacts than larger plants, and measures related to Aquatic Species, Project Operations, and Recreation have the highest capital cost per kilowatt. These findings mean that environmental costs could become a key decision variable for new hydropower developments in the U.S. due to the small scale of most of the remaining potential and the increasing stringency of environmental requirements. Therefore, technologies to reduce the environmental impacts and costs of hydropower would be important for future project developments.

54 ENVIRONMENTAL SCIENCES↗

Environmental design of low-head run-of-river hydropower in the United States: A review of facility design models

We state that the goal of run-of-river hydropower is to produce cost-competitive renewable electricity with minimal disruption of the natural riverine ecosystem. Modeling and feasibility analysis of alternative design options are crucial for developing new run-of-river hydropower projects. Our review shows that existing run-of-river hydropower design models focus on maximizing economic potential at high-head diversion schemes with limited consideration of environmental outcomes. Since nearly three-quarters of new hydropower potential in the United States is found at low-head sites and environmental performance standards are imperative to project success, new models are needed to address the multi-dimensional design challenges at these sites. To aid in formulating holistic models, we synthesize the performance objectives and design variables related to early-stage run-of-river facility design. The objectives span six potential impact areas, including hydrologic alteration, sediment continuity, water quality, aquatic species passage, social, and economic. Based on these reviews, we identify three key areas to enhance the capabilities of run-of-river hydropower design models. These are 1) expanded model formulations, 2) assessment of barrier effects, and 3) explicit environmental objectives. The resulting modeling improvements would accelerate the identification of run-of-river hydropower designs that minimize environmental impacts, promote economic competitiveness, and incorporate the value of non-power benefits.

13 HYDRO ENERGY↗

Getting lost tracking the carbon footprint of hydropower

In the transition to low-carbon electricity, well-quantified estimates of carbon dynamics are needed to ensure that emissions reduction targets are achieved. Here we review the state of the science on carbon accounting for hydropower reservoirs and identify limitations and future solutions. Nearly all research on reservoir greenhouse-gas (GHG) emissions has focused on individual reservoirs in isolation without considering their position in a freshwater network draining organic matter from upstream watersheds or the coordinated operation of reservoir cascades. Second, carbon inventories have extrapolated from a small, non-probabilistic sample of highly variable measurements of GHG emissions to unsampled reservoirs. A stronger statistical foundation is needed to estimate a global inventory and its uncertainty. Third, attribution to hydropower is based on ranks assigned to reservoir purpose. Instead, the physical influence of hydropower on carbon dynamics could be directly measured. Fourth, current carbon-accounting practices neglect time. A time-varying approach would quantify variation in emissions for electricity portfolios from changes in the fuel mix at different times and account for ancillary services, i.e., the ability to support the grid when variable renewables are not available without using natural gas. Reservoirs also sequester a significant portion of inflowing carbon in sediments and slow the carbon cycle by delaying the return of carbon to the atmosphere for decades to centuries. Together, these refinements would help to illuminate pathways toward meeting energy demand with the longest-possible delay in returning carbon to the atmosphere and without adding ancient sources to the pool of carbon cycling through aquatic ecosystems.

13 HYDRO ENERGY↗

Ecological theory applied to environmental metabolomes reveals compositional divergence despite conserved molecular properties

Stream and river systems transport and process substantial amounts of dissolved organic matter (DOM) from terrestrial and aquatic sources to the ocean, with global biogeochemical implications. However, the underlying mechanisms affecting the spatiotemporal organization of DOM composition are under-investigated. To understand the principles governing DOM composition, we leverage the recently proposed synthesis of metacommunity ecology and metabolomics, termed ‘meta-metabolome ecology.’ Applying this novel approach to a freshwater ecosystem, we demonstrated that despite similar molecular properties across metabolomes, metabolite identity significantly diverged due to environmental filtering and variations in putative biochemical transformations. We refer to this phenomenon as ‘thermodynamic redundancy,’ which is analogous to the ecological concept of functional redundancy. We suggest that under thermodynamic redundancy, divergent metabolomes can support equivalent biogeochemical function just as divergent ecological communities can support equivalent ecosystem function. As these analyses are performed in additional ecosystems, potentially generalizable principles, like thermodynamic redundancy, can be revealed and provide insight into DOM dynamics.

Danczak, Robert E.↗

Removal, distribution and retention of metals in a constructed wetland over 20 years

The A-01 wetland treatment system (WTS) was designed to remove metals (primarily copper) from the effluent at the A-01 National Pollution Discharge Elimination System (NPDES) outfall at the Savannah River Site, Aiken, SC. This research investigated metal removal, distribution and retention in the A-01 WTS over a period of 20 years. The findings are important for ensuring continued metal sequestration in the A-01 WTSs over time, providing management guidance for constructed wetlands, and investigating changes in metal remediation effectiveness as a wetland ages. During 20 years of operation, systematic water and sediment sampling validated the wetlands' performance. After passage through the treatment cells, Cu concentrations were well below permit limits during all years of operation, often falling below 10 μg L -1 . Cu removal has been consistent over time, averaging about 80% despite large changes in influent Cu concentrations. Most divalent metals were rapidly removed from the water and held in the sediments shortly after the water entered the treatment wetland. Average removal of Pb from water by the wetland system was 67 and 74% in 2004 and 2020, respectively. Comparable values for Zn were 52 and 65%, respectively. Generally, the highest concentrations of Cu, Pb, and Zn were found in the sediment from the first cell in each pair of cells suggesting that most of the Cu, Pb, and Zn in the A-01 effluent was bound to the sediment quickly. Diffusive gradients in thin films (DGT) measurements of Cu and Zn in the sediments were much lower than bulk sediment concentrations. These results suggest that most of the Cu and Zn in the A-01 WTS sediments was not bioavailable, hence not toxic to aquatic organisms, as a likely consequence of adsorption to sediment particles and complexation with organic and inorganic substances.

54 ENVIRONMENTAL SCIENCES↗

Elevated levels of radiocarbon in methane dissolved in seawater reveal likely local contamination from nuclear powered vessels

Measurements of the natural radiocarbon content of methane ( 14 C-CH 4 ) dissolved in seawater and freshwater have been used to investigate sources and dynamics of methane. However, during investigations along the Atlantic, Pacific, and Arctic Ocean Margins of the United States, as well as in the North American Great Lakes, some samples revealed highly elevated 14 C-CH 4 values, as much as 4–5 times above contemporary atmospheric 14 C-CH 4 levels. Natural production of the 14 CH 4 isotopologue is too low to cause these observations nor can it explain the variations in location and depth. Numerous lab and field validation tests and blanks, as well as the relatively small number of samples that display these elevated values, all suggest that these signals are not derived from an unknown procedural issue. Here, in this work, we suggest that the byproducts of nuclear power generation include localized discharges of the 14 CH4 isotopologue into marine and aquatic environments, severely altering the measured 14 C-CH 4 isotopic signals. Since several of our sample sites are distant from on-land nuclear powerplants, we conduct further calculations concluding that the most elevated anomalies in 14 C-CH 4 likely originate with discharge from nuclear-powered vessels.

54 ENVIRONMENTAL SCIENCES↗

Greenhouse production contributes to pesticide occurrences in Swedish streams

Greenhouse and other covered cultivation systems have increased globally over the past several decades, leading to considerably improved product quality and productivity per land area unit. However, there is a paucity in information regarding the environmental impacts of covered production systems, especially regarding pesticides entering the surrounding environment. Aiming to address this knowledge gap, we collected grab samples downstream of greenhouses from seven Swedish streams every 14 days during a 12 month period. In three of the streams, samples were also taken upstream of the greenhouses and in four of the streams time-integrated samples were collected by TIMFIE samplers in the period between grab sampling occasions. The samples were analyzed for 28 substances (27 that were permitted for use in greenhouse production systems in Sweden and one degradation product to a permitted substance). Pesticide use journals were collected from the greenhouse producers for the 12 month period. The results were examined for indications of greenhouse contributions to detection frequencies, maximum and average concentrations, and potential ecotoxicicity in several ways: (1) comparing locations downstream of greenhouses with registered use of a substance with those without registered use, (2) comparing results from this study with those from the Swedish environmental monitoring program of pesticides in surface water from catchments with no greenhouses from the same period and region, (3) comparing concentration trends with registered pesticide application times in the greenhouses, and (4) comparing up- and downstream concentrations. The results strongly suggest that greenhouse applications do contribute to pesticide occurrences, maximum and median concentrations for most of the pesticides included in this study, and to potential toxicity to aquatic organisms for several of them, most notably imidacloprid, acetamiprid, carbendazim, and pirimicarb.

54 ENVIRONMENTAL SCIENCES↗

Organic matter distribution in the icy environments of Taylor Valley, Antarctica

Glaciers can accumulate and release organic matter affecting the structure and function of associated terrestrial and aquatic ecosystems. Here we analyzed 18 ice cores collected from six locations in Taylor Valley (McMurdo Dry Valleys), Antarctica to determine the spatial abundance and quality of organic matter, and the spatial distribution of bacterial density and community structure from the terminus of the Taylor Glacier to the coast (McMurdo Sound). Our results showed that dissolved and particulate organic carbon (DOC and POC) concentrations in the ice core samples increased from the Taylor Glacier to McMurdo Sound, a pattern also shown by bacterial cell density. Fluorescence Excitation Emission Matrices Spectroscopy (EEMs) and multivariate parallel factor (PARAFAC) modeling identified one humic-like (C1) and one protein-like (C2) component in ice cores whose fluorescent intensities all increased from the Polar Plateau to the coast. The fluorescence index showed that the bioavailability of dissolved organic matter (DOM) also decreased from the Polar Plateau to the coast. Partial least squares path modeling analysis revealed that bacterial abundance was the main positive biotic factor influencing both the quantity and quality of organic matter. Marine aerosol influenced the spatial distribution of DOC more than katabatic winds in the ice cores. Certain bacterial taxa showed significant correlations with DOC and POC concentrations. Collectively, our results show the tight connectivity among organic matter spatial distribution, bacterial abundance and meteorology in the McMurdo Dry Valley ecosystem.

54 ENVIRONMENTAL SCIENCES↗

Mineral-hydrogel composites for mitigating harmful algal bloom and supplying phosphorous for photo-biorefineries

Harmful algal blooms (HAB) are a major environmental concern in eutrophic aquatic systems. To mitigate HABs and recover the phosphorus that drives algal growth, this study developed hydrogel composites seeded with calcium phosphate and wollastonite particles, which first adsorb phosphate (P) and then precipitate it as calcium phosphate. Using a fast-growing cyanobacterium, Synechococcus elongatus 2973, as a model microalga, we found that the mineral-hydrogel composites reduced dissolved P in BG11 media from 5.1 mg/L to 0.31 mg/L, initially reducing the biomass growth rate by up to 73 % and ultimately reducing the total biomass concentration by 75 %. When applied to municipal wastewater and agricultural run-off, the composites removed 96 % and 91 % of the dissolved P, respectively. Moreover, when the recovered P-enriched composites were reused as a slow-release bio-compatible fertilizer in a photobioreactor, they effectively supported algal growth without blocking light and interfering with photosynthesis. The P-enriched composites could tune the P concentration in the culture medium and significantly promote algal lipid accumulation. Finally, this study demonstrates the mineral-hydrogel composites' potential to treat point sources of P pollution and subsequently facilitate photoautotrophic biofuel production as a nutrient, effectively recycling the captured P.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular shifts in dissolved organic matter along a burn severity continuum for common land cover types in the Pacific Northwest, USA

Increasing wildfire severity is of growing concern in the western United States, with consequences for the production, composition, and mobilization of dissolved organic matter (DOM) from terrestrial to aquatic systems. Our current understanding of wildfire impacted DOM (often termed pyrogenic DOM) composition is largely built from temperature-based studies that can be difficult to extrapolate to field conditions, which are often defined by ‘burn severity’, or the post-wildfire impact observed at a site. Thus, burn severity can encapsulate a broader range of fire and environmental conditions not exclusive to temperature. Biogeochemical studies that describe DOM along burn severity continuums remain limited but are needed to better link DOM composition with field conditions post-fire. Here, in this study, we addressed this need with an experimental open air burn simulation that generated chars from vegetation representative of major land cover types in the western United States. The chars were leached to simulate DOM mobilization potential. The DOM composition was characterized by ultra-high resolution mass spectrometry (HR-MS) and UV/VIS absorbance and fluorescence. Our results indicated that the shifts of DOM production and composition along a burn-severity gradient depends on the land cover type that was burned, with the degree of change dependent on the composition of the starting parent vegetation material. Fluorescence signatures indicated a strong convergence across land cover types to more aromatic DOM with increasing severity, while HR-MS indicated an increase in the production of aromatic nitrogen containing DOM with increasing severity. Results from this study enhance our ability to describe DOM composition in a framework that can be more directly related with field and remote-sensing based metrics.

54 ENVIRONMENTAL SCIENCES↗

Autonomous sensor suite for evaluating fish-turbine interactions and environmental impacts in marine renewable energy and hydropower

Marine renewable energy (MRE) harnesses ocean-based resources such as waves, tides, currents, and thermal or salinity gradients for sustainable power generation. It has the potential to complement existing renewable resources, support remote communities, and contribute to decarbonization efforts. However, understanding the hydrodynamic forces created by MRE devices and their impacts on marine life is critical for responsible deployment. Here, to address these concerns, advanced sensor devices, including the Marine Sensor Fish (MSF), Sensor Fish Mini (SF Mini), and Flexible Sensor Fish (FSF), were developed to measure interactions between aquatic organisms and MRE systems. This paper details the design, manufacturing, calibration, and field deployment of these sensor suites, highlighting their ability to capture key physical stressors such as shear forces, pressure changes, and collision impacts. The MSF successfully evaluated turbine interactions at a tidal turbine in the Salish Sea, capturing data on turbulence, collision impact, and pressure gradients. The SF Mini validated hydrodynamic conditions in scaled hydraulic models, supporting computational fluid dynamics simulations. The FSF, with its flexible silicone body, measured species-specific impacts in turbulent environments. This research demonstrates the potential of Sensor Fish technology to advance sustainable marine energy systems by reducing biological impacts and informing environmentally sustainable designs.

Ecological impacts↗

A regional comparison of sub-daily flow variability in regulated and unregulated rivers in the United States

Regulating rivers for hydropower or other purposes can dramatically alter river flow patterns, including creating substantial changes in flow over short, minutes-to-hours-long timespans known as sub-daily flow variability (SDFV). The impacts of flexible hydropower production on flow and aquatic organisms are increasingly documented in research. However, the degree to which flow alteration relates to different hydropower operational modes in distinct geographical regions and seasons is not well understood. This study offers a methodology for regional- and species-appropriate evaluations of potential impacts of flow on fish based on sub-daily flow characteristics of hydropower operational modes. We analyzed 15-min discharge data between 2018 and 2021 from 69 USGS stream gages to compare SDFV in hydropeaking, run-of-river, and unregulated systems in the US Southeast and Pacific Northwest. Regulated systems exhibited significant SDFV downstream from hydropower facilities relative to unregulated systems, but specific impacts differed between regions. Regulated systems in the Southeast were characterized by high flow coefficients of variation and ratios (hydropeaking only) and extended durations of daily upramping flow phases. Regulated systems in the Pacific Northwest were characterized by many short flow phases per day and large portions of the day spent upramping. Pacific Northwest unregulated systems displayed the strongest seasonal flow patterns while Southeastern hydropeaking systems displayed the greatest SDFV. Given that SDFV impacts multiple dimensions of fish ecology, region-specific sub-daily flow signatures have important implications for understanding and mitigating potential community-, species-, and age-specific effects on fish in different parts of the country.

Fish↗

Acoustic focusing of microplastics in microfabricated and steel tube devices: An experimental study on the effects from particle size and medium density

The contamination of aquatic systems with microplastics is becoming a severe threat to living organisms. Microplastics found in the environment consist of a wide range of particle sizes thus give rise to several challenges to current purification methods. Acoustic focusing has been utilized as a particle concentrating method in biological and non-biological applications. In this study, we investigate the feasibility of using acoustic focusing technology to isolate microplastics in aqueous samples and find that a two-stage mechanism is essential to concentrate microplastics of wide size ranges of the same material. We demonstrate for the first time experimentally that when the particle size is comparable to the resonance wavelength, they deviate from typical pressure nodal focusing and show pressure antinodal focusing. Further, we have expanded microplastics isolation beyond microfluidic systems and demonstrate their extraction capabilities relatively at higher flow rates using microplastics of polystyrene, polyethylene, and polymethyl methacrylate ranging from 6 µm to 300 µm diameter and in devices fabricated with cylindrical steel tubes. We could extract 70% of microplastics smaller than 180 µm and 82% of microplastics greater than 180 µm in diameter from an aqueous sample at a flow rate of 12 mL/min. In conclusion, we demonstrate that small microplastics focus on acoustic pressure nodes regardless of the medium density. However, focusing of large microplastics of the same material depends on the medium density.

42 ENGINEERING↗

Energy, economic, and environmental tradeoffs at run-of-river hydropower facilities

Hydropower’s ability to quickly adapt to variability from wind and solar generation by fluctuation flow rates can allow the electricity grid to integrate more renewable capacity. However, these rapid flow fluctuations, required to meet variability needs, can negatively impact aquatic ecosystems. In this study, we quantified energy-economic-environment tradeoffs at five conventional hydropower facilities (i.e. hydropower produced ad a dam on a river channel) across the United States to identify a mix of operational regimes that can provide flexibility to support variable renewable energy integration and environmental protections. Model results show a range of ability to meet demand from 4.7% to 97.8% depending on which case study is considered. Additionally, when modeling the case study facilities on a range of RoR conditions, allowing a % of inflow as discharge, we found the range of 140–200% of inflow allowed as discharge lead to lowest environmental impact while meeting the highest amount of demand. Our sensitivity analysis results demonstrated the Richard-Baker Flashiness Index, used to measure flowrate changes, and Revenue, were negatively correlated with the percent of hydropower generation within the defined Regional Energy Deployment System balancing area (i.e. region in which energy demand and energy supply is balanced based on the Regional Energy Deployment System model) yet positively correlated to the variable renewable energy generation percentage in the defined balancing area. In conclusion, our results suggest hydropower operations can aid in increasing renewable energy generation while limiting environmental impacts when considering a holistic analysis of energy-economic-environment tradeoffs.

Economic impact↗

Wolffia, a minimalist plant and synthetic biology chassis

A highly simplified species for genome engineering would facilitate rational design of a synthetic plant. A candidate species is the aquatic, non-grass monocot wolffia (Wolffia australiana) in the Lemnaceae family. Commonly known as watermeal, wolffia is a rootless ball of several thousand cells the size of a pinhead and the fastest growing plant known on Earth. Its extreme morphological reduction is coupled to transposon-mediated streamlining of its transcriptome, which represents a core set of nonredundant protein coding genes. Despite its body plan and transcriptome being highly specialized for continuous growth, wolffia retains cell types relevant to higher plants. Finally, systems level studies with this species could enable the creation of a defined biological chassis for synthetic plant construction.

59 BASIC BIOLOGICAL SCIENCES↗

Meeting report: The first soil viral workshop 2022

Soil viral ecology is a growing research field; however, the state of knowledge still lags behind that of aquatic systems. Therefore, to facilitate progress, the first Soil Viral Workshop was held to encourage international scientific discussion and collaboration, suggest guidelines for future research, and establish soil viral research as a concrete research area. The workshop took place at Søminestationen, Denmark, between 15 and 17th of June 2022. The meeting was primarily held in person, but the sessions were also streamed online. The workshop was attended by 23 researchers from ten different countries and from a wide range of subfields and career stages. Eleven talks were presented, followed by discussions revolving around three major topics: viral genomics, virus-host interactions, and viruses in the soil food web. The main take-home messages and suggestions from the discussions are summarized in this report.

09 BIOMASS FUELS↗

The value of human data annotation for machine learning based anomaly detection in environmental systems

Anomaly detection is the process of identifying unexpected data samples in datasets. Automated anomaly detection is either performed using supervised machine learning models, which require a labelled dataset for their calibration, or unsupervised models, which do not require labels. While academic research has produced a vast array of tools and machine learning models for automated anomaly detection, the research community focused on environmental systems still lacks a comparative analysis that is simultaneously comprehensive, objective, and systematic. This knowledge gap is addressed for the first time in this study, where 15 different supervised and unsupervised anomaly detection models are evaluated on 5 different environmental datasets from engineered and natural aquatic systems. To this end, anomaly detection performance, labelling efforts, as well as the impact of model and algorithm tuning are taken into account. As a result, our analysis reveals the relative strengths and weaknesses of the different approaches in an objective manner without bias for any particular paradigm in machine learning. Most importantly, our results show that expert-based data annotation is extremely valuable for anomaly detection based on machine learning.

54 ENVIRONMENTAL SCIENCES↗

Structure and composition of natural ferrihydrite nano-colloids in anoxic groundwater

Fe-rich mobile colloids play vital yet poorly understood roles in the biogeochemical cycling of Fe in groundwater by influencing organic matter (OM) preservation and fluxes of Fe, OM, and other essential (micro-)nutrients. Yet, few studies have provided molecular detail on the structures and compositions of Fe-rich mobile colloids and factors controlling their persistence in natural groundwater. Here, we provide comprehensive new information on the sizes, molecular structures, and compositions of Fe-rich mobile colloids that accounted for up to 72% of aqueous Fe in anoxic groundwater from a redox-active floodplain. The mobile colloids are multi-phase assemblages consisting of Si-coated ferrihydrite nanoparticles and Fe(II)-OM complexes. Ferrihydrite nanoparticles persisted under both oxic and anoxic/sulfidic conditions, which we attribute to passivation by Si and OM. These findings suggest that mobile Fe-rich colloids generated in floodplains can persist during transport through redox-variable soils and could be discharged to surface waters. These results shed new light on their potential to transport Fe, OM, and nutrients across terrestrial-aquatic interfaces.

54 ENVIRONMENTAL SCIENCES↗