Search NASA⌕ Search

SEARCH · Search NASA

Results for “avoidance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Appealing sheath-core spun high-performance composite carbon molecular sieve membranes

Carbon molecular sieve (CMS) membranes are attractive candidates to meet requirements for challenging gas separations. The added ability to maintain such intrinsic properties in an asymmetric morphology with a structure that we term a “Pseudo Wheel+Hub & Spoke” asymmetric form offers new opportunities. For CMS membrane, specifically, the structure provides both selective layer support and low flow resistance even for high feed pressures and fluxes in CO 2 removal from natural gas. Further, this capability is unavailable to even rigid glassy polymers due to the much higher modulus of CMS materials. Combining precursor asymmetric hollow fiber formation and optimized pyrolysis creates a defect free CMS proof-of-concept membrane for this application. Facile formation of the sheath-core spun precursor with a 6FDA-DAM sheath and Matrimid® core also avoids the need to seal defects before or after the carbonization of the precursors. The composite CMS membrane shows CO 2 /CH 4 (50 : 50) mixed gas feed with an attractive CO 2 /CH 4 selectivity of 64.3 and CO 2 permeance of 232 GPU at 35 °C. A key additional benefit of the approach is reduction in use of the more costly high performance 6FDA-DAM in a composite sheath-core CMS membrane with the “Pseudo Wheel+Hub & Spoke” structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Scalable Hyperpolarized MRI Enabled by Ace‐SABRE of [1‐ 13 C]Pyruvate

Abstract Hyperpolarized (HP) MRI using [1– 13 C]pyruvate is emerging as a promising molecular imaging approach. Among hyperpolarization methods, Signal Amplification By Reversible Exchange (SABRE) is attractive because SABRE polarizes the substrates directly in room‐temperature solutions avoiding complex hardware. Most SABRE experiments have historically been performed in methanol, a relatively toxic and difficult‐to‐remove solvent. Here we demonstrate the use of a 80/20 acetone/water (A/W) solvent system (Ace‐SABRE) to provide hyperpolarized [1– 13 C]pyruvate with up to 17% polarization, then implement a solvent processing protocol to achieve injectable solutions retaining 74% of the initial polarization, and lastly we demonstrate HP in vivo spectroscopy and imaging using the Ace‐SABRE platform to showcase metabolic tracking in a hepatocellular carcinoma (HCC) tumor as well as HP‐MRI, both in direct comparison to dissolution dynamic nuclear polarization (d‐DNP) experiments. The Ace‐SABRE technique promises faster adoption of SABRE hyperpolarization in biological experiments, overall lowering the barriers to entry for HP‐NMR and HP‐MRI.

Chemistry↗
DOE OSTI2025

Circumventing Radical Generation on Fe–V Atomic Pair Catalyst for Robust Oxygen Reduction and Zinc–Air Batteries

Iron–nitrogen–carbon (Fe–N–C) catalysts are considered the most active platinum-free alternative for oxygen reduction reaction (ORR), yet the generated reactive oxygen species (ROS) from general mechanistic pathway rapidly impair the ORR activity and stability of Fe–N–C. Herein, we establish and report an ORR pathway-switching strategy to circumvent ROS generation and fundamentally improve the activity and stability of Fe–N–C via DFT guided catalyst design. The constructed Fe–V atomic pair catalyst (Fe 1 V 1 -NC) with N 2 Fe-N 2 -VN 2 configuration enables side-on adsorption of O 2 and subsequent direct-breaking of the O═O bond to form O*, thereby avoiding the formation of ROS radicals. Importantly, there is intersite electron interaction between FeN 4 and VN 4 , which further boosts the ORR activity. Consequently, Fe 1 V 1 -NC exhibits outstanding ORR activity with onset and half-wave (E 1/2 ) potentials at 1.02 and 0.89 V versus RHE, respectively, in 0.1 M KOH. Record-high stability is achieved on Fe 1 V 1 -NC with a minimal decay in E 1/2 by 16 mV over 50000 cycles, surpassing Fe–N–C counterpart and most of the catalysts reported to date. The Fe 1 V 1 -NC-based zinc-air battery reported here demonstrates exceptional durability up to 400 h at 10 mA·cm −2 . This work identifies the intrinsic correlation between ORR pathway, activity, and stability, advancing development of stable catalytic systems.

Fe-N-C↗
DOE OSTI2023

Biodegradable waterborne polyurethane-urea dispersion adhesives with high biocontent

Non-biodegradable petroleum-based plastic wastes have become a leading environmental concern, and new efforts are underway to prepare biobased and biodegradable replacements. For this work, we have explored the preparation of adhesives suitable for use in consumer products, and here we report the development of waterborne, biodegradable adhesives from biobased monomers resulting in adhesives exceeding 70% biocontent. Using water as the polymer medium, viscosity challenges and the use of volatile organic solvents are avoided. Material properties of the polyurethane dispersions, resulting films, and laminates produced showed M w ranging between 56,000 and 124,000. Lastly, the biodegradability of films and laminates was evaluated. The resulting metrics indicate that the adhesives produced meet the desired mechanical and biodegradability targets, indicating that high renewability content solvent-free polyurethane dispersions are a viable solution for lamination adhesives.

36 MATERIALS SCIENCE↗
DOE OSTI2025

B‐Staging and Crosslinking of Polycarbosilane at Room Temperature: Cure Mechanism and Properties

The viscosity of polycarbosilane (PCS) polymers is not advantageous for free forming. Various fillers and heat are used to obtain a formable paste. Due to the low yield stress, structures and preforms tend to slump or resin will flow out, especially during the curing of the polymer. B-staging of PCS allows for a more stable structure from room temperature until the full cure of the allyl groups occurs with heat. Additionally, hydrosilation is an effective means of crosslinking at room temperature and controlling viscosity. A network structure was formed in SMP-10 using silane and a vinyl-based crosslinker to bridge each polymer chain. Pt addition catalysts were added to enhance the increase in viscosity to make a lightly crosslinked gel to aid in thickening and forming and to improve the ceramic yield at 1000°C. In conclusion, this enables several options for controlling rheology and improving the properties of preceramic polymers to avoid slumping during curing.

inorganic polymers↗
DOE OSTI2021

Working Principle of an Ionic Liquid Interlayer During Pressureless Lithium Stripping on Li 6.25 Al 0.25 La 3 Zr 2 O 12 (LLZO) Garnet‐Type Solid Electrolyte

Abstract Solid‐state‐batteries employing lithium metal anodes promise high theoretical energy and power densities. However, morphological instability occurring at the lithium/solid–electrolyte interface when stripping and plating lithium during cell cycling needs to be mitigated. Vacancy diffusion in lithium metal is not sufficiently fast to prevent pore formation at the interface above a certain current density during stripping. Applied pressure of several MPa can prevent pore formation, but this is not conducive to practical application. This work investigates the concept of ionic liquids as “self‐adjusting” interlayers to compensate morphological changes of the lithium anode while avoiding the use of external pressure. A clear improvement of the lithium dissolution process is observed as it is possible to continuously strip more than 70 μm lithium (i. e., 15 mAh cm −2 charge) without the need for external pressure during assembly and electrochemical testing of the system. The impedance of the investigated electrodes is analyzed in detail, and contributions of the different interfaces are evaluated. The conclusions are corroborated with morphology studies using cryo‐FIB‐SEM and chemical analysis using XPS. This improves the understanding of the impedance response and lithium stripping in electrodes employing liquid interlayers, acting as a stepping‐stone for future optimization.

Fuchs, Till↗
DOE OSTI2025

Electronic Structure Distortions in Chromium Chelates Impair Redox Kinetics in Flow Batteries

Aminopolycarboxylate chelates are emerging as a promising class of electrolyte materials for aqueous redox flow batteries, offering tunable redox potentials, solubility, and pH stability through careful selection of ligands and transition metal ions. Despite their potential, the impact of molecular structure modifications on the electronic and electrochemical properties of these chelates remains underexplored. Here, in this study, we examine how introducing a hydroxyl group, often employed for its solubilizing properties, to the backbone of CrPDTA, a reference chelate material, significantly changes the thermodynamics and kinetics of the chelate's redox process. We correlate changes in molecular and electronic structures to different electrochemical responses resulting from the hydroxyl addition and show that the introduction of this functional group leads to a distortion in the octahedral coordination of chromium. Furthermore, increased anisotropic spin density and nonintegral oxidation state changes in the Cr metal center result in a larger barrier for electron transfer in CrPDTA‐OH. It is demonstrated that preserving a hexacoordinate chelate structure across a broad pH range is crucial for efficient flow battery application and it is emphasized that ligand modifications must avoid distorting the octahedral coordination of the transition metal.

25 ENERGY STORAGE↗
DOE OSTI2020

Using waste CO 2 from corn ethanol biorefineries for additional ethanol production: life‐cycle analysis

Abstract Corn ethanol plants generate high‐purity carbon dioxide (CO 2 ) while producing ethanol. If that CO 2 could be converted into ethanol by carbon capture and utilization technologies it would be possible to increase ethanol production more than 37% without additional corn grain inputs. Gas fermentation processes use microbes to convert carbon‐containing gases into ethanol and so have the potential to be used with the CO 2 from biorefineries for this purpose. However, as CO 2 utilization technologies for converting thermodynamically stable CO 2 are typically energy intensive, it is necessary to evaluate the related life‐cycle greenhouse gas (GHG) emissions (carbon intensities or CIs) to see whether there are actual emission reduction benefits. In this study, we evaluate the CIs of ethanol produced from high‐purity CO 2 in corn ethanol plants by gas fermentation plus electrochemical reduction. Our analysis shows that the sources of electricity and hydrogen are key drivers of CO 2 ‐based ethanol's GHG emissions. With wind electricity, the design cases show the potential of near‐zero CI ethanol (1.1 g CO 2 e/MJ), but that can increase to up to 331–531 g CO 2 e/MJ when today's U.S. Midwest electricity mix is used. To avoid the renewable electricity intermittency issue, we considered a power purchase agreement option using wind electricity 40% of the time and using the regional mix for the rest, which provides a 42% GHG emission reduction from the CI of gasoline. © 2020 The Authors and UChicago Argonne, LLC, Operator of Argonne National Laboratory. Biofuels, Bioproducts and Biorefining published by Society of Chemical Industry and John Wiley & Sons, Ltd.

09 BIOMASS FUELS↗
DOE OSTI2020

Effect of using a nitrogen atmosphere on enzyme hydrolysis at high corn stover loadings in an agitated reactor

A comprehensive review of the literature shows that enzyme hydrolysis efficiency decreases with increased solids loadings at constant enzyme:cellulose ratios for pretreated lignocellulosic substrates. In seeking a mechanistic explanation for this phenomenon, we found that a nitrogen atmosphere enhances enzyme hydrolysis and minimizes the decrease in glucose yields as solids loadings are increased in an agitated bioreactor. Further, for liquid hot water pretreated corn stover, at solids loadings of both 100 and 200 g/L and hydrolyzed for 72 hr in a 1 L bioreactor at pH 5.0 with 3.6 mg protein per g biomass, glucose yields were 55% in a nitrogen atmosphere versus 45% in air with agitation and about 34% without agitation. While mixing promotes biomass/enzyme contact and disperses sugars released during hydrolysis that would otherwise cause product inhibition, nitrogen gas displaces air, avoiding deactivation of cellulases by oxygen. The nitrogen effect points to a facile approach of enhancing hydrolysis at high solids loadings.

09 BIOMASS FUELS↗
DOE OSTI2020

Chemical Looping of Manganese to Synthesize Ammonia at Atmospheric Pressure: Sodium as Promoter

Abstract Affordable synthetic ammonia (NH 3 ) enables the production of nearly half of the food we eat and is emerging as a renewable energy carrier. Sodium‐promoted chemical looping NH 3 synthesis at atmospheric pressure using manganese (Mn) is here demonstrated. The looping process may be advantageous when inexpensive renewable hydrogen from electrolysis is available. Avoiding the high pressure of the Haber‐Bosch process by chemical looping using earth‐abundant materials may reduce capital cost, facilitate intermittent operation, and allow operation in geographic areas where infrastructure is less sophisticated. At this early stage, the data suggest that 0.28 m 3 of a 50 % porosity solid Mn bed may suffice to produce 100 kg NH 3 per day by chemical looping, with abundant opportunities for improvement.

Aframehr, Wrya Mohammadi↗
DOE OSTI2022

Multigram Synthesis of a Combustion‐Relevant δ‐Ketohydroperoxide through Sulfonylhydrazine Substitution

Abstract A synthesis of a δ‐ketohydroperoxide is described, addressing potential functional‐group compatibilities in these elusive species relevant to combustion and atmospheric chemistries. The hydroperoxide is installed via sulfonylhydrazine substitution, which was found to be more effective than displacement of secondary halides. As part of this protocol, it was observed that 1,2‐dimethoxyethane is an advantageous medium for the reaction, avoiding the formation of a tetrahydrofuran hydroperoxide side product. This discovery facilitated the multigram synthesis (6 steps, 41 % yield overall) and discrete characterization of the target δ‐ketohydroperoxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sn-Based Alloys Synthesized in an Ionic Liquid at Room Temperature: Cu6Sn5 as a Case Study

Sn-based alloys are increasingly investigated owing to possible electronic/structural modulations of interest for electrocatalysis and energy storage applications. Here, we report on the use of a chemical system consisting of an ionic liquid (1-ethyl-3- methylimidazolium bis(trifluoromethanesulfonyl)imide: [EMIm(+)][TFSI-]) and Sn-based precursor Sn(TFSI)(2) both featuring similar anionic groups. This strategy increases the solubility of the cationic precursor in the IL and avoids the formation of side-products during the precipitation of Sn-nanoparticles formed upon reaction with a reducing agent (NaBH4). Using NMR relaxometry, we further established that these nanoparticles are stabilized by specific interactions with the cationic group of the IL. Targeting the composition Cu6Sn5, we further demonstrated that this approach can be used to prepare Sn-based alloys which could not be prepared using conventional chloride-based precursors.

cyclic voltammetry↗
DOE OSTI2022

Enhanced Carbon Capture Behavior of Carbon Fibers via Ionic Liquid Modification

Carbon-based materials are widely deployed in carbon capture but are only limited to physisorption procedures. Further extending functionalized carbon materials to CO 2 chemisorption under low CO 2 concentration is highly desirable yet challenging. In this study, a carbon fiber composed of solely ultra-micropores (~0.45 nm) was deployed as the precursor to avoid the pore blocking effect, which was modified by superbase-derived ionic liquids (ILs) containing strong interaction sites with CO 2 . By forming a thin coating layer on the surface, the as-afforded surface-functionalized fiber materials demonstrated enhanced CO 2 uptake capacity and improved CO 2 sorption kinetics, as evaluated by both the volumetric method and thermogravimetric analysis, as well as the calculated energy distribution curves. The achievements made in this work provide guidance on the functionalization of carbon-based materials towards enhanced CO 2 chemisorption by forming a thin layer of selected IL coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Accelerating x-ray tracing for exascale systems using Kokkos

The upcoming exascale computing systems Frontier and Aurora will draw much of their computing power from GPU accelerators. The hardware for these systems will be provided by AMD and Intel, respectively, each supporting their own GPU programming model. The challenge for applications that harness one of these exascale systems will be to avoid lock-in and to preserve performance portability. We report here on our results of using Kokkos to accelerate a real-world application on NERSC's Perlmutter Phase 1 (using NVIDIA A100 accelerators) and Crusher, the testbed system for OLCF's Frontier (using AMD MI250X). By porting to Kokkos, we successfully ran the same X-ray tracing code on both systems and achieved speed-ups between 13 % and 66 % compared to the original CUDA code. Finally, these results are a highly encouraging demonstration of using Kokkos to accelerate production science code.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

CO 2 Chemisorption Behavior of Coordination-Derived Phenolate Sorbents

CO 2 chemisorption via C-O bond formation is an efficient methodology in carbon capture especially using phenolate-based ionic liquids (ILs) as the sorbents to afford carbonate products. However, most of the current IL systems involve alkylphosphonium cations, leading to side reactions via the ylide intermediate pathway. It is important to figure out the CO 2 chemisorption behavior of phenolate-derived sorbents using inactive and easily accessible cation counterparts without active protons. Herein, phenolate-based systems were constructed via coordination between alkali metal cations with crown ethers to avoid the participation of active protons in CO 2 chemisorption. Reaction pathway study revealed that CO 2 uptake could be achieved by O-C bond formation to afford carbonate. CO 2 uptake capacity and reaction enthalpy were significantly influenced by the coordination effect, alkali metal types, and alkyl groups on the benzene ring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Divergent C–H Amidations and Imidations by Tuning Electrochemical Reaction Potentials

Electrochemical C–H functionalizations are attractive transformations, as they are capable of avoiding the use of transition metals, pre-oxidized precursors, or suprastoichiometric amounts of terminal oxidants. Herein an electrochemically tunable method was developed that enabled the divergent formation of cyclic amines or imines by applying different reaction potentials. Detailed cyclic voltammetry analyses, coupled with chronopotentiometry experiments, were carried out to provide insight into the mechanism, while atom economy was assessed through a paired electrolysis. Finally, selective C–H amidations and imidations were achieved to afford five- to seven-membered sulfonamide motifs that could be employed for late-stage modifications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Highly Stable Subnanometric PtIn Clusters for the Selective Dehydrogenation of Alkanes

Abstract Subnanometric PtIn clusters have been synthesized within pure silica MFI zeolites by post‐synthetic incorporation of In to Pt@K‐MFI. The optimized PtIn@K‐MFI catalyst outcompetes state‐of‐the‐art PtSn formulations in ethane and propane dehydrogenations, avoiding the need of large excess of Pt promoters and harsh reductive conditions.

Li, Chengeng↗
DOE OSTI2025

Reciprocal Ternary Molten Salts Enable the Direct Upcycling of Spent Lithium‐Nickel‐Manganese‐Cobalt Oxide (NMC) Mixtures to Make NMC 622

Cathode active material is the most valuable component of spent lithium‐ion batteries, accounting for ≈30% of their overall value. Direct recycling of cathode materials involves recovering, regenerating, and reusing them without breaking down their chemical structure. This approach maximizes the added value of the cathode compound and reduces manufacturing costs by avoiding the need for virgin material production. However, one key challenge in scaling direct recycling from lab to industry is the requirement for highly purified cathode materials, contrasting with the low purity of black mass generated from battery shredding. No efficient separation process currently exists to isolate different lithium‐nickel‐manganese‐cobalt oxides (NMCs) from each other. Thus, direct recycling technologies that can operate with mixtures of multiple NMC stoichiometries will be best‐suited for industrial adoption. This study explores the direct recycling of NMC mixtures into NMC 622 using a “reciprocal ternary molten salts (RTMS)” system. Ionothermal relithiation and upcycling within the RTMS system successfully restore the layered structure, lithium content, and electrochemical performance of degraded NMCs, yielding results comparable to pristine NMC 622 (P‐NMC 622).

25 ENERGY STORAGE↗