Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

A futuristic approach towards interface layer modifications for improved efficiency in inverted organic solar cells

Inverted polymer Solar Cells of the classical poly (3-hexylthiophene) (P3HT):(6,6)-phenyl-C{sub 61}butyric acid methyl ester (PC{sub 61}BM) blend on indium tin oxide substrates were fabricated, which shows improved device performance, by using a facile solution–processed ZnO-polyelectrolytes [poly (diallyldimethylammonium chloride) (PDADMAC), Poly (acrylic acid sodium salt) (PAS), poly (4-styrenesulfonic acid) (PSS), and Polyvinylpyrrolidone (PVP)] nanocomposite as a cathode interface layer compared to devices using pristine ZnO as cathode buffer layer in ambient conditions. The devices with different combinations of polyelectrolyte with ZnO show different improvements in the device efficiency. The combinations of ZnO with PVP and PDADMAC show highest amount of improvements in the efficiency by a factor of ∼17–19. The improvement of the efficiency may be due to various phenomena, such as the passivation of ZnO surface as well as bulk traps, work function modification, improved energy level alignment, improved electronic coupling of the inorganic/organic interface, improved light harvesting, and decrease of surface as well as bulk charge recombination in the device. The introduction of polyelectrolyte into ZnO inhibits the aggregation of ZnO nanoparticles yielding the large area ZnO nanoclusters; and hence, forming the uniform film of ZnO resulting in the modifications of morphology as well as electronic structure of ZnO-polyelectrolyte nano-composite favouring better electronic coupling between cathode and active layer and hence enhancing the current and, consequently, the efficiency. This simple low temperature ZnO-polyelectrolyte nanocomposite based protocol proposed for cathode interface layer modification may be very much useful for roll to roll industrial manufacturing of organic solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence of the metal-insulator transition in ultrathin unstrained V{sub 2}O{sub 3} thin films

We report the strain state and transport properties of V{sub 2}O{sub 3} layers and V{sub 2}O{sub 3}/Cr{sub 2}O{sub 3} bilayers deposited by molecular beam epitaxy on (0001)-Al{sub 2}O{sub 3}. By changing the layer on top of which V{sub 2}O{sub 3} is grown, we change the lattice parameters of ultrathin V{sub 2}O{sub 3} films significantly. We find that the metal-insulator transition is strongly attenuated in ultrathin V{sub 2}O{sub 3} layers grown coherently on Al{sub 2}O{sub 3}. This is in contrast with ultrathin V{sub 2}O{sub 3} layers grown on Cr{sub 2}O{sub 3} buffer layers, where the metal-insulator transition is preserved. Our results provide evidence that the existence of the transition in ultrathin films is closely linked with the lattice deformation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Architecture for coated conductors

Articles are provided including a base substrate having a layer of an oriented cubic oxide material with a rock-salt-like structure layer thereon, and, a layer of epitaxial titanium nitride upon the layer of an oriented cubic oxide material having a rock-salt-like structure. Such articles can further include thin films of high temperature superconductive oxides such as YBCO upon the layer of epitaxial titanium nitride or upon a intermediate buffer layer upon the layer of epitaxial titanium nitride.

36 MATERIALS SCIENCE↗

Heteroepitaxy of GaP Nucleation Layers on Si by Molecular Beam Epitaxy

The growth of single crystalline GaP nucleation and buffer layers on Si substrates by molecular-beam epitaxy is demonstrated. The use of two different regimes of migration-enhanced epitaxy was studied. It was found that p–n junctions can be created due to the interdiffusion during the growth of GaP layer on p-type Si substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and characterization of (110) InAs quantum well metamorphic heterostructures

An understanding of the growth of (110) quantum wells (QWs) is of great importance to spin systems due to the observed long spin relaxation times. In this article, we report on the metamorphic growth and characterization of high mobility undoped InAs (110) QWs on GaAs (110) substrates. A low-temperature nucleation layer reduces dislocation density, results in tilting of the subsequent buffer layer and increases the electron mobility of the QW structure. The mobility varies widely and systematically (4000–16 000 cm{sup 2}/Vs at room temperature) with deposition temperature and layer thicknesses. Low-temperature transport measurements exhibit Shubnikov de-Haas oscillations and quantized plateaus in the quantum Hall regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved film quality of plasma enhanced atomic layer deposition SiO{sub 2} using plasma treatment cycle

Chemical, physical, and electrical characteristics of high quality silicon dioxide (SiO{sub 2}) films grown using low temperature plasma enhanced atomic layer deposition (PE-ALD) have been investigated as a buffer layer for three dimensional vertical NAND flash memory devices. The comparative angle resolved x-ray photoelectron spectroscopy studies show the plasma treatment cycle causes to shift the core level binding energy (chemical shifts) in the SiO{sub 2} film. The wet etch rates with respect to plasma treatment cycle times were varied due to curing of the SiO{sub 2} network defects by Ar{sup +} ions and oxygen radicals. It is assumed that the angle between the bonds linking SiO{sub 4} tetrahedra is a critical point understanding the variation in wet etch rate of SiO{sub 2}. The features of wet etch rate of low temperature high quality SiO{sub 2} demonstrated lower than high temperature low-pressure chemical vapor deposition (LP-CVD) SiO{sub 2} values. In addition, the better step-coverage compared to that of the LP-CVD SiO{sub 2} film was achieved from the deep trench structure having the 20:1 aspect ratio. PE-ALD SiO{sub 2} with plasma treatment cycle showed excellent I–V properties with higher breakdown voltage compared to LP-CVD SiO{sub 2} and similar to the thermal SiO{sub 2} carrier transport plot.

36 MATERIALS SCIENCE↗

Improvement of Drain Breakdown Voltage with A Back-Side Gate on AlGaN/GaN High Electron Mobility Transistors

The effect of a back gate on the dc performance of AlGaN/GaN high electron mobility transistor was investigated. The back gate was fabricated directly under the device active area by etching off the Si substrate, AlN nucleation layer, and graded AlGaN transition layer and depositing Ni/Au-based gate metal on the exposed GaN buffer layer. The reverse bias gate leakage current decreased from 3.9 × 10 -5 to 1.2 × 10 -5 mA/mm by applying -10 V at the back gate. Because of the suppression of gate leakage current by the back gate, the drain on/off ratio improved from 1.8 × 10 5 to 1.2 × 10 6 and the subthreshold swing from 204 to 137 mV/dec. The drain breakdown voltage could be improved by 40% when the back gate was biased at -25 V.

42 ENGINEERING↗

Non-volatile magnetic random access memory

Improvements are made in a non-volatile magnetic random access memory. Such a memory is comprised of an array of unit cells, each having a Hall-effect sensor and a thin-film magnetic element made of material having an in-plane, uniaxial anisotropy and in-plane, bipolar remanent magnetization states. The Hall-effect sensor is made more sensitive by using a 1 m thick molecular beam epitaxy grown InAs layer on a silicon substrate by employing a GaAs/AlGaAs/InAlAs superlattice buffering layer. One improvement avoids current shunting problems of matrix architecture. Another improvement reduces the required magnetizing current for the micromagnets. Another improvement relates to the use of GaAs technology wherein high electron-mobility GaAs MESFETs provide faster switching times. Still another improvement relates to a method for configuring the invention as a three-dimensional random access memory.

Katti, Romney R.↗

Direct wafer bonding technology for large-scale InGaAs-on-insulator transistors

Heterogeneous integration of III-V devices on Si wafers have been explored for realizing high device performance as well as merging electrical and photonic applications on the Si platform. Existing methodologies have unavoidable drawbacks such as inferior device quality or high cost in comparison with the current Si-based technology. In this paper, we present InGaAs-on-insulator (-OI) fabrication from an InGaAs layer grown on a Si donor wafer with a III-V buffer layer instead of growth on a InP donor wafer. This technology allows us to yield large wafer size scalability of III-V-OI layers up to the Si wafer size of 300 mm with a high film quality and low cost. The high film quality has been confirmed by Raman and photoluminescence spectra. In addition, the fabricated InGaAs-OI transistors exhibit the high electron mobility of 1700 cm{sup 2}/V s and uniform distribution of the leakage current, indicating high layer quality with low defect density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Asymmetry of the Defect Structure of Semipolar GaN Grown on Si(001)

The defect structure of a thick (~15 μm) semipolar gallium nitride (GaN) layer grown by hydride–chloride vapor phase epitaxy on a Si(001) substrate with buffer layers has been studied by transmission electron microscopy. The asymmetry of the defect structure of GaN epilayer has been revealed and analyzed. The influence of this asymmetry on the rate of decrease in the density of threading dislocations in the growing epitaxial layer is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical spacing effect in organic photovoltaic cells incorporating a dilute acceptor layer

The addition of spacing layers in organic photovoltaic cells (OPVs) can enhance light absorption by optimizing the spatial distribution of the incident optical field in the multilayer structure. We explore the optical spacing effect in OPVs achieved using a diluted electron acceptor layer of C{sub 60}. While optical spacing is often realized by optimizing buffer layer thickness, we find that optical spacing via dilution leads to cells with similar or enhanced photocurrent. This is observed despite a smaller quantity of absorbing molecules, suggesting a more efficient use of absorbed photons. In fact, dilution is found to concentrate optical absorption near the electron donor-acceptor interface, resulting in a marked increase in the exciton diffusion efficiency. Contrasting the use of changes in thickness to engineer optical absorption, the use of dilution does not significantly alter the overall thickness of the OPV. Optical spacing via dilution is shown to be a viable alternative to more traditional optical spacing techniques and may be especially useful in the continued optimization of next-generation, tandem OPVs where it is important to minimize competition for optical absorption between individual sub-cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Propagation of misfit dislocations from buffer/Si interface into Si

Misfit dislocations are redirected from the buffer/Si interface and propagated to the Si substrate due to the formation of bubbles in the substrate. The buffer layer growth process is generally a thermal process that also accomplishes annealing of the Si substrate so that bubbles of the implanted ion species are formed in the Si at an appropriate distance from the buffer/Si interface so that the bubbles will not migrate to the Si surface during annealing, but are close enough to the interface so that a strain field around the bubbles will be sensed by dislocations at the buffer/Si interface and dislocations are attracted by the strain field caused by the bubbles and move into the Si substrate instead of into the buffer epi-layer. Fabrication of improved integrated devices based on GaN and Si, such as continuous wave (CW) lasers and light emitting diodes, at reduced cost is thereby enabled.

36 MATERIALS SCIENCE↗

Nanocomposites for ultra high density information storage, devices including the same, and methods of making the same

A nanocomposite article that includes a single-crystal or single-crystal-like substrate and heteroepitaxial, phase-separated layer supported by a surface of the substrate and a method of making the same are described. The heteroepitaxial layer can include a continuous, non-magnetic, crystalline, matrix phase, and an ordered, magnetic magnetic phase disposed within the matrix phase. The ordered magnetic phase can include a plurality of self-assembled crystalline nanostructures of a magnetic material. The phase-separated layer and the single crystal substrate can be separated by a buffer layer. An electronic storage device that includes a read-write head and a nanocomposite article with a data storage density of 0.75 Tb/in.sup.2 is also described.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

1.1 eV GaInAs Cell Development for Dual-Use Solar and 1070 nm Laser Power Converters

Dual-use power converter cells can receive solar and laser power simultaneously to generate current, an application relevant to space and terrestrial industries. This study investigates two concepts of solar cells optimized for dual-use 1070 nm laser and solar power conversion, a single-junction and triple-junction cell. Because it is bandgap-tuned for a 1070 nm laser, the 1.1 eV junction is incorporated into each of the two designs, making its development key to the success of both concepts. Efficiency data for a one junction GaInAs cell demonstrates a laser conversion efficiency of 38% at 1070nm wavelength without an anti-reflection coating. However, the single-junction device requires optimization to reduce short wavelength absorption of the broad solar spectrum. In both devices, the graded buffer layers in the GaInAs cell affects the cell's performance by reducing threading dislocations in the active junction. However, the buffer in the three-junction device also acts as a lateral transport layer and so affects the fill factor depending on its sheet resistance. By varying the buffer thickness, we demonstrate a direct relationship between buffer thickness and sheet resistance reduction, while considering implications to open-circuit voltages. We also performed resistance modeling to determine the optimal grid spacing and thickness of the grid fingers to minimize losses due to sheet resistance and grid shading.

junctions↗

1.1 eV GaInAs Cell Development for Dual-Use Solar and 1070 nm Laser Power Converters

Dual-use photovoltaic cells can receive solar and laser power simultaneously to generate current, an application relevant to space and terrestrial industries. This study investigates two concepts of solar cells optimized for dual-use 1070 nm laser and solar power conversion, a single-junction and triple-junction cell. The cell designs are based upon the 3- junction inverted metamorphic solar cell, previously shown highly efficient for solar conversion. Because it is closely bandgap-tuned for a 1070 nm laser, the 1 eV bottom junction is incorporated into each of the two designs, making its development key to the success of both concepts. However, each design requires some modification for efficient dual use. The single-junction device requires optimization to reduce short wavelength absorption of the broad solar spectrum. In both devices, the graded buffer layers in the GaInAs cell affect the cell's performance by reducing threading dislocations in the active junction. However, the buffer in the three-junction device also acts as a lateral transport layer and so affects the fill factor depending on its sheet resistance. By varying the buffer thickness, we demonstrate a direct relationship between buffer thickness and sheet resistance reduction, while considering implications to open-circuit voltages. We also performed resistance modeling to determine the optimal grid spacing and thickness of the grid fingers to minimize losses due to sheet resistance and grid shading. Efficiency data for a one junction GaInAs cell demonstrates a laser conversion efficiency of 38% at 1070 nm wavelength without an anti-reflection coating.

dual-use↗

1.1 eV GaInAs Cell Development for Dual-Use Solar and 1075 nm Laser Power Converters

Dual-use power converter cells can receive solar and laser power simultaneously to generate current, an application relevant to space and terrestrial industries. This study investigates two concepts of solar cells optimized for dual- use 1070 nm laser and solar power conversion, a single-junction and triple-junction cell. Because it is bandgap-tuned for a 1070 nm laser, the 1.1 eV junction is incorporated into each of the two designs, making its development key to the success of both concepts. Efficiency data for a one junction GaInAs cell demonstrates a laser conversion efficiency of 38% at 1070nm wavelength without an anti-reflection coating. However, the single-junction device requires optimization to reduce short wavelength absorption of the broad solar spectrum. In both devices, the graded buffer layers in the GaInAs cell affects the cell's performance by reducing threading dislocations in the active junction. However, the buffer in the three-junction device also acts as a lateral transport layer and so affects the fill factor depending on its sheet resistance. By varying the buffer thickness, we demonstrate a direct relationship between buffer thickness and sheet resistance reduction, while considering implications to open-circuit voltages. We also performed resistance modeling to determine the optimal grid spacing and thickness of the grid fingers to minimize losses due to sheet resistance and grid shading.

dual-use↗

Stimulated Emission at 1.3-μm Wavelength in Metamorphic InGaAs/InGaAsP Structure with Quantum Wells Grown on Ge/Si(001) Substrate

A laser structure comprising metamorphic InGaAsP layer and InGaAs quantum wells on a non-inclined Si(001) substrate with relaxed Ge buffer layer has been grown for the first time by metal-organic vapor phase epitaxy (MOVPE). The optically pumped lasers exhibit stimulated emission at a wavelength of 1.3 μm. At liquid-nitrogen temperature, the threshold power density of pumping at 0.8 μm amounted to 250 kW/cm{sup 2}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thin-Film Solar Cells with 19% Efficiency by Thermal Evaporation of CdSe and CdTe

CdTe-based solar cells exhibiting 19% power conversion efficiency were produced using widely available thermal evaporation deposition of the absorber layers on SnO2-coated glass with or without a transparent MgZnO buffer layer. Evaporating CdSe and CdTe sequentially by thermal evaporation and subsequent CdCl2 annealing establishes efffective CdSeTe band grading as well as dense, large-grain films. These results show that high-performance II-VI photovoltaics can be made by inexpensive, commercially available evaporation systems without the need to build customized equipment, enabling CdTe photovoltaics research and manufacturing to be more accessible to the broader photovoltaics community.

14 SOLAR ENERGY↗