Search NASA⌕ Search

SEARCH · Search NASA

Results for “cation effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Local structure, bonding, and asymmetry of $\mathrm{((NH_2)_2CH)PbBr_3}$, $\mathrm{CsPbBr_3}$, and $\mathrm{(CH_3MH_3)PbBr_3}$

Here we report local structure measurements for CsPbBr 3 and ((NH 2 ) 2 CH)PbBr 3 (FAPbBr 3 ) and compare them with recent results for (CH 3 NH 3 )PbBr 3 (MAPbBr 3 ). The Pb-Br bonding is similar for all three systems; the effective spring constants, κ, are comparable (ranging from 1.20 to 1.95 eV/Å 2 ), but small in magnitude indicating very soft materials. However, there are also important differences between the three systems. Static disorder is very small for CsPbBr3 but increases somewhat with the size of the organic molecular ions MA + and FA + . At room temperature, dynamic disorder dominates in all compounds. The thermal disorder of the Pb-Br pair distribution function (PDF), i.e., the Debye-Waller factor σ 2 follows a correlated Debye or Einstein model up to 300 K in CsPbBr 3 (orthorhombic phase), but for FAPbBr 3 and MAPbBr 3 , there is a break in the σ 2 (T) curve at the orthorhombic-tetragonal transition (o-t) near 150 K, indicating a small change in the spring constant κ. κ increases for MAPbBr 3 but decreases in FAPbBr 3 at this transition. These changes are attributed to changes in the H-bonding between Br - and MA + or FA + at this transition, as a result of librations or rotations of these molecular cations. In addition, the Pb-Br PDF becomes asymmetric at a relatively low temperature for FAPbBr 3 and MAPbBr 3 , while this effect is significantly smaller for CsPbBr 3 . Finally, we address the question of a model to explain the asymmetric PDF. Two main models are discussed in the literature, an anharmonic pair potential and a split-pair distribution, possibly driven by the presence of a lone pair on the Pb ion. We show that the fourth cumulant C 4 can differentiate between these two models and other possible models. Experimentally C 4 is positive at 250 K and above, for all three systems and that is inconsistent with a split-peak model, for which C 4 is negative for splittings larger than 0.12 Å.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Influence of Seawater Salts on Magnesium Oxide Hydration: Implications for Carbonation

The effects of individual component salts on MgO hydration and subsequent carbonation have not been systematically investigated despite the increase in utilization of seawater and other brines in the production of MgO-containing next-generation cements, fire retardants, and sorbents for CO2. Here, we present a study of MgO hydration in the presence of individual saltwater cations at a range of concentrations, as well as binary mixtures at seawater concentrations, and subsequent carbonation. We observed that the presence of the cations increased MgO dissolution rates and that the subsequent carbonation extent of the hydrated material remained constant or even increased. Since the presence of these salts during hydration does not show negative effects on subsequent carbonation in our experimental study, the application of seawater and other brines containing high concentrations of these salts to hydrate MgO in industrial processes is likely feasible.

Evans, Barbara [ORNL] (ORCID:0000000225742567)↗
DOE OSTI2020

Direct Nano‐Synthesis Methods Notably Benefit Mg‐Battery Cathode Performance

Abstract Rechargeable magnesium batteries are promising candidates for next‐generation electrochemical energy storage, but their development is severely hindered by sluggish solid‐state diffusion and significant desolvation penalties of the divalent cation. Studies suggest that nano‐sized electrode materials alleviate these issues by shortening diffusion lengths and increasing electrode/electrolyte interaction. Here, the effect of particle size and synthetic methodology on the electrochemical performance of four sulfide cathode materials in Mg batteries is investigated: layered TiS 2 , CuS, spinel Ti 2 S 4 , and CuCo 2 S 4 . In these sulfide hosts, the direct preparation of nano‐dimensional crystallites is critical to activate or improve electrochemistry. Even promising cathode materials can appear electrochemically inert when micron‐sized particles are investigated (e.g., CuCo 2 S 4 ), and mechanical milling leads to surface degradation of active material which severely limits performance. However, nano‐sized CuCo 2 S 4 prepared directly reaches a capacity nearly double that of ball‐milled material and delivers 350 mAh g −1 at 60 °C. This work provides synthetic considerations which may be crucial in the discovery and design of novel Mg cathode materials, so that promising candidates are not overlooked. By extension, in oxide materials where Mg 2+ diffusion is expected to be much more sluggish, this factor is anticipated to be even more important when screening for new hosts.

Blanc, Lauren E.↗
DOE OSTI2021

Influence of Cation Size on the Local Atomic Structure and Electronic Properties of Ta Perovskite Oxynitrides

Partial anion substitution in transition metal oxides provides rich opportunities to control and tune physical and chemical properties, for example, combining the merits of oxides and nitrides. In addition, the possibility of resulting anion sublattice order provides a means to target polar and chiral structures based on a wide array of accessible structural archetypes by design. Here, in this work, we investigate the local structures of a family of perovskite tantalum oxynitrides—ATaO 2 N (A = Ba, Sr, and Ca)—using a combination of experimental and theoretical approaches including neutron total scattering, density functional theory (DFT), and ab initio molecular dynamics (AIMD) simulations. We present the first experimental study of chemical short-range order (CSRO) in CaTaO 2 N, confirming local cis N ordering of the anion sub-lattice. Our systematic exploration of a local structure across the A cation size series (from the larger Ba to the smaller Ca) reveals a perovskite motif increasingly distorted with respect to long-range average structures. DFT and AIMD simulations support the observed trends. Overall, structures with cis ordering of the nitrogen anions in each TaO 4 N 2 octahedron are favored over those with trans ordering. With diminishing A cation size, local cis ordering and Ta off-centering play decreasing roles in overall lattice stability, overshadowed by the stabilizing effects of octahedral tilting. The influence of these factors on local dipole formation and frustrated dipole ordering are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Coupled Cluster Study of the Heats of Formation of UF 6 and the Uranium Oxyhalides, UO 2 X 2 (X = F, Cl, Br, I, and At)

The atomization enthalpies of the U(VI) species UF6 and the uranium oxyhalides UO 2 X 2 (X=F, Cl, Br, I, At) were calculated using a composite relativistic Feller-Peterson-Dixon (FPD) approach based on scalar relativistic DKH3-CCSD(T) with extrapolations to the CBS limit. The inherent multideterminantal nature of the U atom was mitigated by utilizing the singly charged atomic cation in all calculations with correction back to the neutral asymptote via the accurate ionization energy of the U atom. The effects of SO coupling were recovered using full 4-component CCSD(T) with contributions due to the Gaunt Hamiltonian calculated using Dirac-Hartree-Fock. The final atomization enthalpy for UF 6 (752.2 kcal/mol) was within 2.5 kcal/mol of the experimental value, but unfortunately the latter carries a ±2.4 kcal/mol uncertainty that is predominantly due to the experimental uncertainty in the formation enthalpy of U atom. The analogous value for UO 2 F 2 (607.6 kcal/mol) was in nearly exact agreement with experiment, but the latter has a stated experimental uncertainty of ±4.3 kcal/mol. The FPD atomization enthalpy for UO 2 Cl 2 (540.4 kcal/mol) was within the experimental error limits of ±5.5 kcal/mol. FPD atomization energies for the non-U-containing molecules (used for reaction enthalpies) H 2 O and HX (X=F, Cl, Br, I, At) were within at most 0.3 kcal/mol of their experimental values where available. The FPD atomization enthalpies, together with FPD reaction enthalpies for two different reactions, were used to determine heats of formation for all species of this work with estimated uncertainties of ±4 kcal/mol. The calculated heat of formation for UF 6 (-511.0 kcal/mol) is within 2.5 kcal/mol of the accurately-known (±0.45 kcal/mol) experimental value.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Polyamide-Based Ion Exchange Membranes: Cation-Selective Transport through Water Purification Membranes

Ion-selective membranes are necessary components of many electrochemical systems including fuel cells, electrolyzers, redox flow batteries, and electrodialyzers. Perfluorinated sulfonated membranes (PFSMs) dominate these applications due to their excellent combination of fast ion transport, stability, and processability. However, perfluorinated cation exchange membranes (CEMs) are expensive, and their production process involves chemistry that generates toxic perfluorinated chemicals. The development of affordable, nonfluorinated membranes with a competitive combination of high ion selectivity, transport, and stability could help enable the widespread use of the technologies listed above while hastening the development of emerging electrochemical systems, including aqueous alkaline CO 2 sorbent regeneration. To this end, we pursue the use of thin-film composite polyamide (PA-TFCs) membranes–those that typically find application in reverse osmosis and nanofiltration desalination–as cation-selective exchange membranes. Given their negative surface charge under neutral-to-alkaline conditions, PA-TFCs can serve as effective CEMs in these pH regimes. We prepared a series of PA-TFCs from traditional monomers (trimesoyl chloride and piperazine) and compared their thicknesses, charge densities, water transport properties, ion transport properties, and long-term stability in a high pH environment to traditional CEMs (Nafion and FKE) and commercial nanofiltration and reverse osmosis membranes. We find that some of the best-performing PA-TFC membranes have similar resistances and Na + transference numbers compared to Nafion 117 in Na 2 SO 4 and NaHCO 3 -containing solutions. This proof-of-principle study suggests that further optimization of PA-TFCs could enable cost-effective ion exchange membrane alternatives to PFSMs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tuning Catalytically Active Single Sites in Nonstoichiometric, Mixed Metal Oxides for Oxygen Electrocatalysis (Final Technical Report)

The objective of the proposed work is to employ controlled synthesis, advanced characterization, detailed electrochemical testing and theoretical calculations to develop a framework that would guide the design of robust, non-stoichiometric mixed metal oxides for oxygen electrocatalysis. In this research plan, we focus around the idea of tuning the metal ion composition and environment to create single atom centers with the utmost electrocatalytic activity. We hypothesized that tuning the cationic sites in nonstoichiometric mixed metal oxides will lead to single 4d/5d metal surface sites with optimal catalytic activity for low temperature oxygen reduction (ORR) and oxygen evolution (OER) at solid/liquid interfaces. We will focus on different crystal structures of these oxides including Ruddlesden-Popper (R-P) oxides, simple perovskites and pyrochlores due to their flexibility in accommodating different metal cation dopants, and the fact that they represent variations in the cationic arrangements in non-stoichiometric mixed metal oxide structures, which will lead to an understanding of how bulk crystal structure effects catalytic activity and stability of these systems.

08 HYDROGEN↗
DOE OSTI2023

Molecular dynamics simulation studies of 1,3-dimethyl imidazolium nitrate ionic liquid with water

The fundamental understanding of intermolecular interactions of ionic liquids (ILs) with water is essential in predicting IL–water thermodynamic properties. In this study, intermolecular or noncovalent interactions were studied for 1,3-dimethyl imidazolium [DMIM]+ cation and nitrate [NO 3 ] – anion with water, employing quantum mechanics and molecular dynamics simulations. Molecular dynamics simulations were performed using a revised multipolar polarizable force field. The effect of water on ionic liquids was evaluated in terms of thermodynamic and dynamic properties. Thermodynamic properties included liquid densities ρ, excess molar volumes ΔV E , and liquid structures g(r)⁠. Dynamic properties included self-diffusion coefficients D of mixture constituents as a function of water concentration. The density of ionic liquid–water mixtures monotonically decrease with increasing concentration of water. A negative excess volume was obtained for low and high water concentrations, demonstrating strong intermolecular interactions of water with ionic liquid components. Liquid structures of ionic liquid–water mixtures revealed a tendency for anions to interact with cations at shorter intermolecular distances when the water concentration is increased. Diffusion rates were found to increase for all mixture components with increase in the fraction of water. A significant change in the diffusion rate was found at ~0.3 weight fraction of water. However, the water self-diffusion coefficient was dominant at all concentrations. Furthermore, the ratio of water/anion and anion/cation self-diffusion coefficients was found to decrease linearly with increasing concentration of water molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Enhanced Reactivity of Accessible Protons in Sodalite Cages of Faujasite Zeolite

Abstract Faujasite (FAU) zeolites (with Si/Al ratio of ca. 1.7) undergo mild dealumination at moderate ion exchange conditions (0.01 to 0.6 M of NH 4 NO 3 solutions) resulting in protons circumscribed by sodalite cages becoming accessible for reaction without conspicuous changes to bulk crystallinity. The ratio of protons in sodalite cages (H SOD ) to supercages (H SUP ) can be systematically manipulated from 0 to ca. 1 by adjusting ammonium concentrations used in ion exchange. The fraction of accessible protons in the sodalite cages is assessed by virtue of infrared spectra for H‐D exchange of deuterated propane based on the band area ratio of OD 2620 /OD 2680 (OD SOD /OD SUP ). Protons in sodalite cages (H SOD ) show higher rate constants of propane dehydrogenation ( k D ) and cracking ( k C ) than protons in supercages (H SUP ) plausibly due to confinement effects being more prominent in smaller voids. Rate constants of dehydrogenation and cracking including k D / k C ratios are also augmented as the fraction of accessible protons in the sodalite cages is enhanced. These effects of accessibility and reactivity of protons in sodalite cages hitherto inconspicuous are revealed herein via methods that systematically increase accessibility of cations located in sodalite cages.

Li, Xinyu↗
DOE OSTI2026

Interfacial Void Formation and Self-Healing in Oxide Scales on Al-containing High-Entropy Alloy

The exceptional high-temperature oxidation resistance of Al-containing high-entropy alloys (HEAs) is often attributed to the formation of a protective α-Al 2 O 3 scale. However, the dynamic, atomic-scale mechanisms governing the stability of this scale—including interfacial void formation and the often-postulated but rarely visualized “self-healing” capacity—remain poorly understood. Herein, we reveal the complex evolution of the triple-layer oxide scale on an Al 10 CoCrFeNi HEA through combined electron microscopy and diffraction study. We show that interfacial voids are an inherent consequence of the scaling process, originating from two distinct mechanisms: the Kirkendall effect at the interface between the γ-Al 2 O 3 /α-Al 2 O 3 and alloy driven by cationic diffusion imbalance and volumetric contraction due to phase transformations at the spinel/Cr 2 O 3 interface. Crucially, we provide microstructural evidence consistent with an intrinsic self-healing response. This process is driven by coupled inward diffusion of oxygen and outward diffusion of metal cations, leading to the in-situ formation of transient θ-Al 2 O 3 and spinel phases that partially fill and seal the voids. Here, these results provide atomic-scale insights into the phase evolution, defect formation, and self-repair of oxide scales in HEAs—highlighting pathways to enhance their oxidation resistance in extreme environments.

High-entropy alloy↗
DOE OSTI2023

AlN Base Material Development for High Temperature Application [Poster]

Polar wurtzite AlN-based alloy materials have exceptional optoelectronic and charge transport properties (e.g., Al1-xGaxN in LEDs and Al1-xScxN as a promising new ferroelectric1). Other cation substitutions include Ta 3+ , Cr 3+ , Er 3+ , Yb 3+ , and small amounts of Gd 3+ , 2-6 but ionic size effects are a serious issue, and other variables affecting solubility are underexplored in this family, hampering development of new functional AlN-based alloys.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

X-ray photoelectron spectroscopy of epitaxial films and heterostructures

X-ray photoelectron spectroscopy is a powerful experimental technique that yields invaluable information on a range of phenomena that occur in solids, liquids, and gasses. The binding energy and shape of a photoemission peak is sensitive not only to the atomic number, valence and orbital from which the electron is ejected, but also to complex many-body effects that accompany photoemission. Provided the influences of these different drivers of spectral line shapes can be disentangled, a great deal can be learned about the electronic structures of specific atoms in the material of interest. In addition to these largely local effects, the long-range electrostatic environment and resulting electric potential at the emitting atom have a direct effect on the measured binding energies. Furthermore, this fact opens the door to extracting information about the dependence of the valence and conduction band minima on depth below the surface, which in turn allows both vertical and lateral electrical transport data to be better understood. One purpose of this Report is to describe how the different physical forces described above impact spectral properties of complex oxide epitaxial films. This class of materials typically incorporates transition metal cations in different valences and of all the elements, these exhibit the most complex core-level spectra. A second purpose is to show how a comprehensive understanding of local physical effects in x-ray photoemission allows one to extract detailed information on internal electric fields and band edge discontinuities in heterostructures involving complex oxides from core-level line shapes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Harnessing Cation Disorder for Enhancing Ionic Conductivity in Lithium Inverse Spinel Halides

Halides are promising solid-state electrolytes for all-solid-state lithium batteries due to their exceptional oxidation stability, high Li-ion conductivity, and mechanical deformability. However, their practicality is limited by the reliance on rare and expensive metals. This study investigates the Li 2 MgCl 4 inverse spinel system as a cost-effective alternative. Molecular dynamics simulations reveal that lithium disordering at elevated temperatures significantly reduces the activation energy in Li 2 MgCl 4 . To stabilize this disorder at lower temperatures, we experimentally explored the Li x Zr 1–x/2 Mg x/2 Cl 4 system and found that Zr doping induces both Zr and Li disorder at the 16c site at room temperature (RT). This leads to a 2 order-of-magnitude increase in ionic conductivity for the Li 1.25 Zr 0.375 Mg 0.625 Cl 4 composition, achieving 1.4 × 10 –5 S cm –1 at RT, compared to pristine Li 2 MgCl 4 . By deconvoluting the role of lithium vacancies and dopants, we reveal that cation disordering to the 16c site predominantly enhances ionic conductivity, whereas lithium vacancy concentration has a very limited effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Magnetocapacitance effect and magnetoelectric coupling in type-II multiferroic HoFeWO 6

We have investigated the multiferroicity and magnetoelectric (ME) coupling in HoFeWO 6 . With a noncentrosymmetric polar structure (space group Pna2 1 ) at room temperature, this compound shows an onset of electric polarization with an antiferromagnetic ordering at the Néel temperature (T N ) of 17.8 K. The magnetic properties of the polycrystalline samples were studied by DC and AC magnetization and heat capacity measurements. The metamagnetic behavior at low temperatures was found to be directly related to the dielectric properties of the compound. In particular, field-dependent measurements of capacitance show a magnetocapacitance (MC) effect with double-hysteresis loop behavior in direct correspondence with the magnetization. Our x-ray diffraction results show the Pna2 1 structure down to 8 K and suggest the absence of a structural phase transition across T N . Soft x-ray absorption spectroscopy and soft x-ray magnetic circular dichroism (XMCD) measurements at the Fe L 2,3 and Ho M 4,5 edges revealed the oxidation state of Fe and Ho cations to be 3+. Fe L 2,3 XMCD further shows that Fe 3+ cations are antiferromagnetically ordered in a noncollinear fashion with spins arranged 90° with respect to each other. Our findings show that HoFeWO 6 is a type-II multiferroic exhibiting a MC effect. Furthermore, the observed MC effect and the change in polarization by the magnetic field, as well as their direct correspondence with magnetization, further support the strong ME coupling in this compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Influence of counterion substitution on the properties of imidazolium-based ionic liquid clusters

Due to their unique physiochemical properties that may be tailored for specific purposes, ionic liquids (ILs) have been investigated for various applications, including chemical separations, catalysis, energy storage, and space propulsion. The different cations and anions comprising ILs may be selected to optimize a range of desired properties, such as thermal stability, ionic conductivity, and volatility, leading to the designation of certain ILs as designer “green” solvents. The effect of counterions on the properties of ILs is of both fundamental scientific interest and technological importance. Herein, we report a systematic experimental and theoretical investigation of the size, charge, stability toward dissociation, and geometric/electronic structure of 1-ethyl-3-methyl imidazolium (EMIM)-based IL clusters containing two different atomic counterions (i.e., bromide [Br − ] and iodide [I − ]). This work extends our studies of EMIM + cations with atomic chloride (Cl − ) and molecular tetrafluoroborate (BF 4 − ) anions reported previously by Baxter et al. [Chem. Mater. 34, 2612 (2022)] and Zhang et al . [J. Phys. Chem. Lett. 11, 6844 (2020)], respectively. Distributions of anionic IL clusters were generated in the gas phase using electrospray ionization and characterized by high mass resolution mass spectrometry, energy-resolved collision-induced dissociation, and negative ion photoelectron spectroscopy experiments. The experimental results reveal anion-dependent trends in the size distribution, relative abundance, ionic charge state, stability toward dissociation, and electron binding energies of the IL clusters. Complementary global optimization theory provides molecular-level insights into the bonding and electronic structure of a selected subset of clusters, including their low energy structures and electrostatic potential maps, and how these fundamental characteristics are influenced by anion substitution. Collectively, our findings demonstrate how the fundamental properties of ILs, which determine their suitability for many applications, may be tuned by substituting counterions. These observations are critical in the sub-nanometer cluster size regime where phenomena do not scale predictably to the bulk phase, and each atom counts toward determining behavior.

cluster↗
DOE OSTI2025

Transient methods for understanding the properties of strongly oxidizing radicals

This review discusses the properties of strongly oxidizing radicals in organic and aqueous media and highlights the challenges in obtaining accurate values of their reduction potentials. Transient redox equilibrium methods based on the use of strong photooxidants or initiated by pulse radiolysis are shown to provide versatile approaches for decoupling electron transfer reactions from follow-up reactivity of unstable radical species, resulting in accurate values of reduction potentials of very positive couples, including some solvent radical cations. Here, we also show that correlations of reduction potentials with Hammett Σσ + p parameters, as well as gas phase ionization potentials, can be used to estimate the redox properties of unknown couples within a homologous series of compounds. The effects of ion pairing and hemicolligation on redox properties of organic and inorganic radicals are also discussed.

14 SOLAR ENERGY↗
DOE OSTI2020

Review—Polymer/Ceramic Interface Barriers: The Fundamental Challenge for Advancing Composite Solid Electrolytes for Li-Ion Batteries

Composite-solid electrolytes, in which ion-conducting polymers are combined with superionic ceramics, could revolutionize electrochemical-energy-storage devices enabling higher energy density, providing greater stability during operation and enhanced safety. However, the interfacial resistance between the ceramic and polymer phases strongly suppresses the ionic conductivity and presents the main obstacle to the use of these materials. Here, we emphasize the need for a distinct focus on reducing energy barriers to interfacial ion transport and improving the cation transference number. To achieve this goal, it is essential to develop a fundamental understanding of the parameters that influence the interfacial barriers to ion transport in composite electrolytes, and to understand the effect of the type of ceramic ("active" and "inert") and its content on ion-transport phenomena. We suggest that adapting the polymer chemistry, mainly directed on polymerized ionic liquids, (PolyILs), and combined with functionalization of the surface of ceramic nanoparticles is a promising route for overcoming the high-energy-barrier challenge. Owing to high content of ion-conducting ceramics and high t+ of PolyILs, the fractional contribution of the migrating cationic species to the total ionic conductivity of polymer-in-ceramic electrolytes via an interfacial percolation path, will be close to unity, thus eliminating complications that might arise from emerging concentration gradients during the operation of solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

A polysulfide/ferricyanide redox flow battery with extended cycling

The inexpensive sulfur raw material is promising to enable cost-effective redox flow batteries for long duration energy storage. But the catastrophic through-membrane crossover of polysulfides remains a severe challenge resulting in irreversible performance degradation and short cycle life. In this work, we demonstrate that use of a permselective cation exchange membrane yields a two orders of magnitude enhancement in polysulfide retention compared to the benchmark Nafion membrane. Combined physico-chemical, spectroscopic, and microscopic analyses suggest more disordered sidechain structures, which lead to the more hydrophobic nature and smaller hydrophilic domains in the membrane. The microstructural features contribute to the effective mitigation of polysulfide crossover. As a result, the cycle life of polysulfide/ferricyanide flow cells is boosted over a substantially extended test time. This finding sheds light on the fundamental membrane factors that cause polysulfide permeation and can provide feasible directions in the development of permselective membranes for polysulfide flow batteries.

36 MATERIALS SCIENCE↗