Search NASA⌕ Search

SEARCH · Search NASA

Results for “circularity analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Torsion of Noncircular Composite Cylinders

The paper presents a brief overview of the predicted deformation and failure characteristics of noncircular composite cylinders subjected to torsion. Using a numerical analysis, elliptical cylinders with a minor-to-major diameter ratio of 0.7 are considered. Counterpart circular cylinders with the same circumference as the elliptical cylinders are included for comparison. The cylinders are constructed of a medium-modulus graphite-epoxy material in a quasi-isotropic lay-up. Imperfections generated from the buckling mode shapes are included in the initial cross-sectional geometry of the cylinders. Deformations until first fiber failure, as predicted using the maximum stress failure criterion and a material degradation scheme, are presented. For increasing levels of torsion, the deformations of the elliptical cylinders, in the form of wrinkling of the cylinder wall, occur primarily in the flatter regions of the cross section. By comparison the wrinkling deformations of the circular cylinders are more uniformly distributed around the circumference. Differences in the initial failure and damage progression and the overall torque vs. twist relationship between the elliptical and circular cylinders are presented. Despite differences in the response as the cylinders are being loaded, at first fiber failure the torque and twist for the elliptical and circular cylinders nearly coincide.

Rouse, Marshall↗
NASA NTRS2018

Nosetip Bluntness Effects on Transition at Hypersonic Speeds: Experimental and Numerical Analysis Under NATO STO AVT-240

The existing database of transition measurements in hypersonic ground facilities has established that the onset of boundary layer transition over a circular cone at zero angle of attack shifts downstream as the nosetip bluntness is increased with respect to a sharp cone. However, this trend is reversed at sufficiently large values of the nosetip Reynolds number, so that the transition onset location eventually moves upstream with a further increase in nosetip bluntness. This transition reversal phenomenon, which cannot be explained on the basis of linear stability theory, was the focus of a collaborative investigation under the NATO STO group AVT-240 on Hypersonic Boundary-Layer Transition Prediction. The current paper provides an overview of that effort, which included wind tunnel measurements in three different facilities and theoretical analysis related to modal and nonmodal amplification of boundary layer disturbances. Because neither first and second-mode waves nor entropy-layer instabilities are found to be substantially amplified to initiate transition at large bluntness values, transient (i.e., nonmodal) disturbance growth has been investigated as the potential basis for a physics-based model for the transition reversal phenomenon. Results of the transient growth analysis indicate that disturbances that are initiated within the nosetip or in the vicinity of the juncture between the nosetip and the frustum can undergo relatively significant nonmodal amplification and that the maximum energy gain increases nonlinearly with the nose radius of the cone. This finding does not provide a definitive link between transient growth and the onset of transition, but it is qualitatively consistent with the experimental observations that frustum transition during the reversal regime was highly sensitive to wall roughness, and furthermore, was dominated by disturbances that originated near the nosetip.

Numerical analysis↗
NASA NTRS1978

Infrared Astronomical Satellite (IRAS) analysis, appendix B

Analytical results derived during the development of the PADE program are presented. Near field on-axis diffraction from a circular aperture is analyzed by integrating Kirchhoff's formula, the boundary wave formulation, and the Rayleigh-Sommerfeld theory. Far field on-axis diffraction from obliquely illuminated apertures is described using the angular spectrum approach. Transmission functions and diffracted fields for rectangular, circular, and rotated square apertures are presented.

Source record↗
NASA NTRS1990

A semi-micromechanic interlaminar strain analysis on curved-beam specimens

Experimental analyses were performed for determination of interlaminar strains in circumferentially unidirectional curved beam specimens. Semi-circular and semi-elliptic carbon-epoxy specimens were subjected to opening mode tensile loadings. Whole field measurements were recorded at load levels from about 5 to more than 90 pct of failure loads. Contour maps of displacement fields were obtained by using moire interferometry, using reference gratings of 2400 lines/mm or 60,690 lines/in. Whole field contour maps of circumferential and interlaminar strains were obtained by using moire interferometry in a semi-micromechanic scale. Various anomalous effects were observed in the displacement fields. The zig-zag fringe patterns indicated that the fiber orientation in each layer was not truly circumferential. This deviation from the unidirectionality caused free-edge effects, such as interlaminar shear strains even at the axis of symmetry and the altered normal strains in the thickness direction. In the resin rich zones between layers, the tensile interlaminar strain was excessively large due to the large compliance. As the result of the combined effect of these anomalous behaviors, the values of the interlaminar tensile strains were larger than those predicted analytically. The modulus E sub 3 was actually smaller than the assumed value E sub 2 by 20 pct.

Joh, Duksung↗
NASA NTRS1992

Adaptive unstructured meshing for thermal stress analysis of built-up structures

An adaptive unstructured meshing technique for mechanical and thermal stress analysis of built-up structures has been developed. A triangular membrane finite element and a new plate bending element are evaluated on a panel with a circular cutout and a frame stiffened panel. The adaptive unstructured meshing technique, without a priori knowledge of the solution to the problem, generates clustered elements only where needed. An improved solution accuracy is obtained at a reduced problem size and analysis computational time as compared to the results produced by the standard finite element procedure.

Dechaumphai, Pramote↗
NASA NTRS1992

Adaptive unstructured meshing for thermal stress analysis of built-up structures

An adaptive unstructured meshing technique for mechanical and thermal stress analysis of built-up structures has been developed. A triangular membrane finite element and a new plate bending element are evaluated on a panel with a circular cutout and a frame stiffened panel. The adaptive unstructured meshing technique, without a priori knowledge of the solution to the problem, generates clustered elements only where needed. An improved solution accuracy is obtained at a reduced problem size and analysis computational time as compared to the results produced by the standard finite element procedure.

Dechaumphai, Pramote↗
NASA NTRS1976

Three-dimensional finite element analysis of acoustic instability of solid propellant rocket motors

A three dimensional finite element solution of the acoustic vibration problem in a solid propellant rocket motor is presented. The solution yields the natural circular frequencies of vibration and the corresponding acoustic pressure mode shapes, considering the coupled response of the propellant grain to the acoustic oscillations occurring in the motor cavity. The near incompressibility of the solid propellant is taken into account in the formulation. A relatively simple example problem is solved in order to illustrate the applicability of the analysis and the developed computer code.

Hackett, R. M.↗
NASA NTRS1978

NASTRAN analysis of a wheel-rail loading on its foundation

One type of azimuth bearing for a large ground antenna (100 m) will consist of steel wheels, mounted at four corners of the alidade, rolling on a circular flat rail which provides the vertical restraints; a radial constraining bearing at the center of the alidade provides the horizontal restraints. One important design feature is the compressive stresses in the grout or concrete foundation under the wheel-rail load. A finite element analysis check was made of a particular design that consists of a steel rail resting on a concrete foundation. Symmetry was assumed as much as possible in order to minimize the models, but meaningful element sizes were used. Recently developed isoparametric hexahedron elements available in the NASTRAN computing program, which minimizes the number of elements required while maintaining the accuracy of the computed stresses, were used with two versions of NASTRAN. Test cases to check with the analytical solutions were made. A side loading was also applied to calculate the increase in the concrete stresses.

Katow, M. S.↗
NASA NTRS1995

Implementation of a Single-Stage-To-Orbit (SSTO) model for stability and control analysis

Three NASA centers: Marshall Space Flight Center (MSFC), Langley Research Center (LaRC), and Johnson Space Center (JSC) are currently involved in studying a family of single-stage- and two-stage-to-orbit (SSTO/TSTO) vehicles to serve as the next generation space transportation system (STS). A rocketed winged-body is the current focus. The configuration (WB001) is a vertically-launched, horizontally-landing system with circular cross-section. Preliminary aerodynamic data was generated by LaRC and is a combination of wind-tunnel data, empirical methods, and Aerodynamic Preliminary Analysis System-(APAS) generated values. JSC's efforts involve descent trajectory design, stability analysis, and flight control system synthesis. Analysis of WB001's static stability indicates instability in 'tuck' (C(sub mu) less than 0: Mach = 0.30, alpha greater than 3.25 deg; Mach = 0.60, alpha greater than 8.04), an unstable dihedral effects (C(sub l(beta)) greater than 0: Mach = 30,alpha less than 12 deg.; Mach = 0.60, alpha less than 10.00 deg.), and, most significantly, an unstable weathercock stability derivative, C(sub n(beta)), at all angles of attack and subsonic Mach numbers. Longitudinal trim solutions for Mach = 0.30 and 0.60 indicate flight path angle possibilities ranging from around 12 (M = 0.30) to slightly over 20 degrees at Mach = 0.60. Trim angles of attack increase from 6.24 at Mach 0.60 and 10,000 feet to 17.7 deg. at Mach 0.30, sea-level. Lateral trim was attempted for a design cross-wind of 25.0 knots. The current vehicle aerodynamic and geometric characteristics will only yield a lateral trim solution at impractical tip-fin deflections (approximately equal to 43 deg.) and bank angles (21 deg.). A study of the lateral control surfaces, tip-fin controllers for WB001, indicate increased surface area would help address these instabilities, particularly the deficiency in C(sub n(beta)), but obviously at the expense of increased vehicle weight. Growth factors of approximately 7 were determined using a design C(sub n(beta)) of 0.100/radian (approximate subsonic values for the orbiter).

Ingalls, Stephen A.↗
NASA NTRS1982

The 100-meter radiometer spacecraft study

A rigid body analysis of a baseline Large Space System (LSS) which is to function as a radiometer is presented. The LSS is placed in circular orbit about the Earth at an altitude of 650 km, subjected to environmental and vehicle interaction forces and torques, without an active control system of any type on board. The environment forces and torques are gravity gradient, solar radiation, and aerodynamic. Normal operation is in nadir pointing along the Z-local vertical axis. Orbital velocity is assigned to the x-axis of the spacecraft. The analysis is then used to demonstrate the ability or lack of the gravity gradient torques to stabilize the LSS over one complete orbit.

Zimbelman, H. F.↗
NASA NTRS1973

Nonlinear analysis of a shock-loaded membrane.

Results from a computer method for analyzing the unsteady interaction of a fluid stream and a flat circular elastic membrane are presented. The loading on the membrane is assumed to be caused by the firing of a shock tube. The fluid pressures and velocities are determined from a scheme based on the numerical method of characteristics, and the membrane is analyzed using exact relations for membrane strain. The interactive solution is found to give peak stresses 40% lower than a solution which assumes a pressure invariant in space and time.

Madden, R.↗
NASA NTRS1974

Bifurcation analysis of the onset of necking in an elastic/plastic cylinder under uniaxial tension

The bifurcation problem governing the onset of axisymmetric necking in a circular cylindrical specimen in uniaxial tension is analysed. The specimen is made of an incompressible elastic/plastic material. One end is subject to a prescribed uniform axial displacement relative to the other and both ends are shear free. The true stress at bifurcation is greater than the stress at which the maximum load is attained by an amount which depends on (a) the radius to length ratio of the specimen, (b) the ratio of the elastic shear modulus to the tangent modulus, and (c) the derivative of the tangent modulus with respect to the stress. Bifurcation takes place immediately following attainment of the maximum load when the specimen is sufficiently slender.

Hutchinson, J. W.↗
NASA NTRS1975

Dynamic analysis of the long-term zonal earth energy budget experiment (LZEEBE) spacecraft

The motions of the flexible LZEEBE spacecraft after injection into a circular orbit were analyzed. The spacecraft consists of three spherical balloons connected to a central hub by three long flexible booms which lie in a plane such that the angle between any pair of booms is 120 degrees. The major torques acting on the spacecraft are gravity-gradient torques and torques due to solar radiation pressure acting on the balloons which have different reflective properties. A development of the equations of motion is presented. Computer simulations indicate that the spacecraft will have random motion, provided the injection into orbit does not create conditions favorable to gravity-gradient capture.

Meirovitch, L.↗
NASA NTRS1974

Analysis of twisting stiffness for a multifiber composite layer

The twisting stiffness of a rectangular cross section consisting of a single row of solid circular cross-section fibers embedded in a matrix is analyzed. The problem is formulated as a Dirichlet torsion problem of a multielement region and solved by the boundary-point least-squares method. Numerical results for a single-fiber square cross section compare favorably with previous relaxation-method results. New numerical results for three and five-fiber composites suggest that the torsional rigidity of a multifiber composite can be approximated from the torsional rigidities of single and three-fiber models.

Bert, C. W.↗
NASA NTRS1996

A non-axisymmetric linearized supersonic wave drag analysis: Mathematical theory

A Mathematical theory is developed to perform the calculations necessary to determine the wave drag for slender bodies of non-circular cross section. The derivations presented in this report are based on extensions to supersonic linearized small perturbation theory. A numerical scheme is presented utilizing Fourier decomposition to compute the pressure coefficient on and about a slender body of arbitrary cross section.

Barnhart, Paul J.↗
NASA NTRS2014

Analysis of Petal Rotation Trajectory Characteristics

In this study, the characteristics of petal rotation trajectories are explored in both the two-body and circular restricted three-body problem (CRTBP) models. Petal rotation trajectories alternate long and short resonances of different kinds to rotate the line of apsides. They are typically computed using the patched conic model, and they are used in a number of different missions and mission concepts including Cassini, JUICE, and Europa mission concepts. Petal rotation trajectories are first analyzed here using the patched conic model to quantify their characteristics and search for cases with fast rotation of the line of apsides. When they are computed in the CRTBP, they are unstable periodic orbits with corresponding stable and unstable manifolds. The characteristics of these orbits are explored from a dynamical systems perspective in the second phase of the study.

Resonance↗
NASA NTRS1973

First look analysis of geologic ground patterns on ERTS-1 imagery of Missouri

Examination of ERTS-1 data for selected areas of Missouri revealed not only many of the known geologic features but also a number of unknown linear, circular and arcuate ground patterns. The number of new geologic elements that have been brought to light as well as the sharp definition and probable extensions of several known geologic features point out the importance of multispectral imagery via satellite and the synoptic views which they provide. To date, analysis and interpretations have been a first-look visual examination of the unenhanced projected images.

Allen, W. H.↗
DOE OSTI2026

Tunable chiral and nematic states in the triple-Q antiferromagnet Co 1/3 TaS 2

Complex spin configurations in magnetic materials, ranging from collinear single-Q to non-coplanar multi-Q states, exhibit rich symmetry and chiral properties. However, their detailed characterization is often hindered by the limited spatial resolution of neutron diffraction techniques. Here we employ magnetic circular dichroism and magnetic linear dichroism to investigate the triangular lattice antiferromagnet Co 1/3 TaS 2 , revealing three-state (Z 3 ) nematicity and also spin chirality across its multi-Q magnetic phases. At intermediate temperatures, the presence of linear dichroism identifies nematicity arising from a single-Q stripe phase, while at high magnetic fields and low temperatures, a phase characterized solely by circular dichroism emerges, signifying a purely chiral non-coplanar triple-Q state. Notably, at low temperatures and small fields, we discover a unique phase where both chirality and nematicity coexist. A theoretical analysis based on a continuous multi-Q manifold captures the emergence of these distinct magnetic phases, as a result of the interplay between four-spin interactions and weak magnetic anisotropy. Additionally, both circular and linear dichroism microscopy spatially resolves the chiral and nematic domains. Our findings establish Co 1/3 TaS 2 as a rare platform hosting diverse multi-Q states with distinct combinations of spin chirality and nematicity while demonstrating the effectiveness of polarized optical techniques in characterizing complex magnetic textures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗