Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Structure and magnetic properties of bulk nanocrystalline Tm{sub 2}(Co{sub 1-x}Fe{sub x}){sub 17} permanent magnet

Structure and magnetic properties were studied for Tm{sub 2}(Co{sub 1-x}Fe{sub x}){sub 17} bulk nanocrystalline magnet synthesized by spark plasma sintering technique. X-ray diffraction results indicate both ingot and sintered magnet of Tm{sub 2}(Co{sub 0.7}Fe{sub 0.3}){sub 17} alloy exhibit hexagonal Th{sub 2}Ni{sub 17} type structure. The microstructure of the magnet is composed of Th{sub 2}Ni{sub 17} type nanograins with an average size of 35 nm detected by transmission electron microscopy and selected area electron diffraction patterns. Magnetic measurement shows that the remanence of the magnet is higher at 573 K than at 300 K, indicating there is a positive remanence temperature coefficient in the magnet. The anisotropy field of Tm{sub 2}(Co{sub 0.7}Fe{sub 0.3}){sub 17} alloy is 3.8 T, which is much higher than the H{sub A} of 2.3 T for the pure Tm{sub 2}Co{sub 17} alloy. The coercivity of the sintered magnet increases from 0.25 to 0.354 T after optimal annealing.

36 MATERIALS SCIENCE↗

Flash microwave synthesis and sintering of nanosized La{sub 0.75}Sr{sub 0.25}Cr{sub 0.93}Ru{sub 0.07}o{sub 3-{delta}} for fuel cell application

Perovskite-oxide nanocrystals of La{sub 0.75}Sr{sub 0.25}Cr{sub 0.93}Ru{sub 0.07}O{sub 3-{delta}} with a mean size around 10 nm were prepared by microwave flash synthesis. This reaction was performed in alcoholic solution using metallic salts, sodium ethoxide and microwave autoclave. The obtained powder was characterised after purification by energy dispersive X-ray analysis (EDX), X-ray powder diffraction (XRD), BET adsorption technique, photon correlation spectroscopy (PCS) and transmission electron microscopy (TEM). The results show that integrated perovskite-type phase and uniform particle size were obtained in the microwave treated samples. At last the synthesised powder was directly used in a sintering process. A porous solid, in accordance with the expected applications, was then obtained at low sintering temperature (1000 deg. C) without use of pore forming agent. - Graphical abstract: TEM photograph of La{sub 0.75}Sr{sub 0.25}Cr{sub 0.93}Ru{sub 0.07}O{sub 3-{delta}} obtained by microwave flash synthesis. This picture confirms the nanometric size of the ceramic particles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An approach to preparing porous and hollow metal phosphides with higher hydrodesulfurization activity

This paper describes an effective method for the synthesis of metal phosphides. Bulk and supported Ni{sub 2}P, Cu{sub 3}P, and CoP were prepared by thermal treatment of metal and the amorphous red phosphorus mixtures. Porous and hollow Ni{sub 2}P particles were also synthesized successfully using this method. The structural properties of these products are investigated using X-ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), inductively coupled plasma (ICP-AES) and X-ray photoemission spectroscopy (XPS). A rational mechanism was proposed for the selective formation of Ni{sub 2}P particles. In experimental conditions, the Ni{sub 2}P/SiO{sub 2} catalyst exhibits excellent hydrodesulfurization (HDS) activity for dibenzothiophene (DBT). - Graphical abstract: Bulk and supported Ni{sub 2}P, Cu{sub 3}P, and CoP were prepared by thermal treatment of their metal and amorphous red phosphorus mixtures. Porous and hollow Ni{sub 2}P particles were successfully synthesized by this method also. In the experimental condition, a Ni{sub 2}P/SiO{sub 2} catalyst exhibits excellent hydrodesulfurization activity for dibenzothiophene. Highlights: > A new synthetic route by heat treating mixtures of metal and red phosphorus in flowing N{sub 2} to prepare corresponding metal phosphides. > Porous and hollow Ni{sub 2}P particles may successfully be obtained using the route. > It is very easy to synthesize other bulk and supported metal phosphides using the mixing of bulk and supported metal and red phosphorus by the method. > The Ni{sub 2}P/SiO{sub 2} catalyst synthesized by the route shows a good HDS of dibenzothiophene. > Its operation is simple (only heat treating pure metal and red phosphorus), and the reaction time is short (only 0.5 h).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct observations of Ge{sub 2}Sb{sub 2}Te{sub 5} recording marks in the phase-change disk

Atomistic structures of the Ge{sub 2}Sb{sub 2}Te{sub 5} thin film in the real phase-change disk have been investigated using transmission electron microscopy (TEM). As-deposited amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} films were laser-irradiated for initialization (crystallization) and recording. Cross-sectional TEM observations revealed that the recording mark was fully amorphized by laser irradiation. A slight difference between the as-deposited and the laser irradiation-induced amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} was observed in the intensity profile of nanobeam electron diffraction patterns and atomic pair distribution functions. This difference was attributed to structural relaxation of amorphous Ge{sub 2}Sb{sub 2}Te{sub 5}, which gives rise to the alteration of chemical order.

36 MATERIALS SCIENCE↗

Model-based determination of dielectric function by STEM low-loss EELS

Dielectric properties of materials are crucial in describing the electromagnetic response of materials. As devices are becoming considerably smaller than the optical wavelength, the conventional measuring methods based on optical response are limited by their spatial resolution. Electron energy loss spectroscopy performed in a scanning transmission electron microscope is a good alternative to obtain the dielectric properties with excellent spatial resolution. Due to the overlap of diffraction discs in scanning transmission electron microscopy, it is difficult to apply conventional experimental settings to suppress retardation losses. In this contribution, a relativistic dielectric model for the loss function is presented which is used in a model based optimization scheme to estimate the complex electric function of a material. The method is applied to experiments on bulk diamond and SrTiO{sub 3} and shows a good agreement with optical reference data when retardation effects are included. Application of this technique to nanoparticles is possible but several theoretical assumptions made in the model of the loss function are violated and interpretation becomes problematic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CTAB-assisted synthesis and photocatalytic property of CuO hollow microspheres

CuO hollow microspheres have been fabricated through a simple hydrothermal method in the presence of cetyltrimethylammonium bromide (CTAB). The products were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The effects of reaction temperature, surfactant, and the molar ratio of Urea/Cu(PI) on the morphologies of the resulting products were investigated. The possible formation mechanism of CuO hollow dandelion-like architectures was proposed. The hierarchical CuO hollow microspheres exhibited a high photocatalytic activity for decolorization of Rhodamine B (RhB) under UV-light illumination. - Graphical abstract: Dandelion-like CuO hollow microspheres were fabricated through a hydrothermal method. The prepared products exhibited a high photocatalytic activity for the photocatalytic decolorization of Rhodamine B aqueous solution under UV-light illumination.

36 MATERIALS SCIENCE↗

Symmetry of LaAlO{sub 3} nanocrystals as a function of crystallite size

Properties of LaAlO{sub 3} nanocrystallites obtained by the precipitation method, doped with praseodymium and chromium ions were examined by spectroscopic means. Raman spectroscopy, high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD) and electronic spectroscopy proved that symmetry of LaAlO{sub 3} crystallites depends on their size. At room temperature the smallest obtained crystals (average size {approx}5 nm) have cubic symmetry, while the largest ones (average size over 110 nm) exhibit rhombohedral symmetry. Possible explanations for this phenomenon are discussed. - Graphical Abstract: The 77 K emission spectra of LaAlO{sub 3}:Pr{sup 3+} nanocrystallites codoped with Cr{sup 3+} as a function of the annealing temperature. Intensities were normalized to the maximum of the {sup 3}P{sub 0{yields}}{sup 3}H{sub 4} transition. The R line at 13633 cm{sup -1} vanish with decreasing the nanocrystals size and is absent for the smallest ones.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and structural characterization of Al{sub 4}Si{sub 2}C{sub 5}-homeotypic aluminum silicon oxycarbide, (Al{sub 6-x}Si{sub x})(O{sub y}C{sub 5-y}) (x{approx}0.8 and y{approx}1.6)

We have prepared a new layered oxycarbide, [Al{sub 5.25(5)}Si{sub 0.75(5)}][O{sub 1.60(7)}C{sub 3.40(7)}], by isothermal heating of (Al{sub 4.4}Si{sub 0.6})(O{sub 1.0}C{sub 3.0}) at 2273 K near the carbon-carbon monoxide buffer. The crystal structure was characterized using X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The title compound is trigonal with space group R3m (centrosymmetric), Z=3, and hexagonal cell dimensions a=0.32464(2) nm, c=4.00527(14) nm and V=0.36556(3) nm{sup 3}. The atom ratios Al:Si were determined by EDX, and the initial structural model was derived by the direct methods. The final structural model showed the positional disordering of one of the three types of Al/Si sites. The reliability indices were R{sub wp}=4.45% (S=1.30), R{sub p}=3.48%, R{sub B}=2.27% and R{sub F}=1.25%. The crystal is composed of three types of domains with nearly the same fraction, one of which has the crystal structure of space group R3-bar m. The crystal structure of the remaining two domains, which are related by pseudo-symmetry inversion, is noncentrosymmetric with space group R3m. - Graphical Abstract: A new aluminum silicon oxycarbide, (Al{sub 6-x}Si{sub x})(O{sub y}C{sub 5-y}) (x{approx}0.8 and y{approx}1.6). The crystal is composed of three types of domains (I, II and III), and hence the structure is represented by a split-atom model. Individual crystal structures can be regarded as layered structures, which consist of A-type [(Al,Si){sub 4}(O,C){sub 4}] unit layers and B-type [(Al,Si)(O,C){sub 2}] single layers.

36 MATERIALS SCIENCE↗

Preparation and thermoelectric properties of ternary superionic conductor CuCrS{sub 2}

Transition metal chalcogenide CuCrS{sub 2} powder was synthesized by mechanical alloying (MA) and then consolidated by spark plasma sintering (SPS) technique at 673-1073 K. The phase structure, microstructure and thermoelectric properties of samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and Seebeck coefficient/electrical conductivity measuring system, respectively. All the bulks indicated a single phase CuCrS{sub 2}, while the high relative density over 90% were attained for the samples sintered at 873-1073 K. The electrical conductivity of bulk samples displayed a typical characteristic of semiconductor. With increasing measuring temperature, the conductive behaviour of bulk samples sintered over 973 K showed a semiconductor transformation from n-type to p-type due to the changes of main carrier type. The sample obtained by applying SPS at 873 K got the highest power factor 83.2 {mu}W m{sup -1} K{sup -2}, and the largest ZT value 0.11 at 673 K. - Graphical abstract: The samples sintered above 873 K, both of the Seebeck coefficient and electrical conductivity exhibit an increase tendency with increasing temperature, which is due to the mechanism of mix-conduction for CuCrS{sub 2}. Highlights: Black-Right-Pointing-Pointer Single phase CuCrS{sub 2} powder was synthesized by ball-milling at 425 rpm for 40 h. Black-Right-Pointing-Pointer Dense CuCrS{sub 2} bulks were fabricated using SPS techniques at sintering temperature 873-1073 K. Black-Right-Pointing-Pointer Seebeck coefficient of CuCrS{sub 2} samples sintered over 973 K change the signs. Black-Right-Pointing-Pointer Highest power factor reached 83.2 {mu}W m{sup -1} K{sup -2} at 673 K for the sample sintered at 873 K. Black-Right-Pointing-Pointer ZT value was 0.11 at 673 K for the sample sintered at 873 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and structural characterization of Al{sub 4}SiC{sub 4}-homeotypic aluminum silicon oxycarbide, [Al{sub 4.4}Si{sub 0.6}][O{sub 1.0}C{sub 2.0}]C

A new quaternary layered oxycarbide, [Al{sub 4.39(5)}Si{sub 0.61(5)}]{sub S}IGMA{sub 5}[O{sub 1.00(2)}C{sub 2.00(2)}]{sub S}IGMA{sub 3}C, has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The title compound was found to be hexagonal with space group P6{sub 3}/mmc, Z=2, and unit-cell dimensions a=0.32783(1) nm, c=2.16674(7) nm and V=0.20167(1) nm{sup 3}. The atom ratios Al:Si were determined by EDX, and the initial structural model was derived by the direct methods. The final structural model showed the positional disordering of one of the three types of Al/Si sites. The maximum-entropy methods-based pattern fitting (MPF) method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. The reliability indices calculated from the MPF were R{sub wp}=3.73% (S=1.20), R{sub p}=2.94%, R{sub B}=1.04% and R{sub F}=0.81%. The crystal was an inversion twin. Each twin-related individual was isostructural with Al{sub 4}SiC{sub 4} (space group P6{sub 3}mc, Z=2). - Graphical abstract: A new oxycarbide discovered in the Al-Si-O-C system, Al{sub 4}SiC{sub 4}-homeotypic [Al{sub 4.4}Si{sub 0.6}][O{sub 1.0}C{sub 2.0}]C. The crystal is an inversion twin, and hence the structure is represented by a split-atom model. The three-dimensional electron density distributions are determined by the maximum-entropy methods-based pattern fitting, being consistent with the disordered structural model.

36 MATERIALS SCIENCE↗

Absence of vapor-liquid-solid growth during molecular beam epitaxy of self-induced InAs nanowires on Si

The growth mechanism of self-induced InAs nanowires (NWs) grown on Si (111) by molecular beam epitaxy was investigated by in situ reflection high energy electron diffraction and ex situ scanning and transmission electron microscopy. Abrupt morphology transition and in-plane strain relaxation revealed that InAs NWs nucleate without any significant delay and under the absence of indium (In) droplets. These findings are independent of the As/In-flux ratio, revealing entirely linear vertical growth rate and nontapered NWs. No evidence of In droplets nor associated change in the NW apex morphology was observed for various growth termination procedures. These results highlight the absence of vapor-liquid-solid growth, providing substantial benefits for realization of atomically abrupt doping and composition profiles in future axial InAs-based NW heterostructures on Si.

36 MATERIALS SCIENCE↗

New perovskite-based manganite Pb{sub 2}Mn{sub 2}O{sub 5}

A new perovskite based compound Pb{sub 2}Mn{sub 2}O{sub 5} has been synthesized using a high pressure high temperature technique. The structure model of Pb{sub 2}Mn{sub 2}O{sub 5} is proposed based on electron diffraction, high angle annular dark field scanning transmission electron microscopy and high resolution transmission electron microscopy. The compound crystallizes in an orthorhombic unit cell with parameters a=5.736(1) A{approx}{radical}2a{sub p}, b=3.800(1) A{approx}a{sub p}, c=21.562(6) A{approx}4{radical}2a{sub p} (a{sub p}-the parameter of the perovskite subcell) and space group Pnma. The Pb{sub 2}Mn{sub 2}O{sub 5} structure consists of quasi two-dimensional perovskite blocks separated by 1/2[110]{sub p}(101){sub p} crystallographic shear planes. The blocks are connected to each other by chains of edge-sharing MnO{sub 5} distorted tetragonal pyramids. The chains of MnO{sub 5} pyramids and the MnO{sub 6} octahedra of the perovskite blocks delimit six-sided tunnels accommodating double chains of Pb atoms. The tunnels and pyramidal chains adopt two mirror-related configurations ('left' L and 'right' R) and layers consisting of chains and tunnels of the same configuration alternate in the structure according to an -L-R-L-R-sequence. The sequence is sometimes locally violated by the appearance of -L-L- or -R-R-fragments. A scheme is proposed with a Jahn-Teller distortion of the MnO{sub 6} octahedra with two long and two short bonds lying in the a-c plane, along two perpendicular orientations within this plane, forming a d-type pattern. - Graphical abstract: Order of the Jahn-Teller distorted MnO{sub 6} octahedra in Pb{sub 2}Mn{sub 2}O{sub 5}. Two long and two short bonds lie in the a-c plane, along two perpendicular orientations within this plane, forming a d-type pattern.

36 MATERIALS SCIENCE↗

Ce-doped EuO: Magnetic properties and the indirect band gap

We have prepared and investigated thin films of EuO doped with the rare-earth element cerium. X-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy were used to determine the quality of these films prepared by pulsed laser deposition. Ce doping leads to an enhanced Curie temperature near 150 K, close to that seen for oxygen-deficient EuO{sub 1-x}. However, the magnetization of Ce-doped EuO exhibits differences from that observed for Gd-doped and oxygen-deficient samples. The high-resolution angular-resolved photoemission from Ce-doped EuO reveals filling of conduction-band states near the X point. This indicates that the band gap in EuO is indirect, and that at 2% doping Ce-doped EuO{sub 1-x} is at least semimetallic.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy of thermodynamically metastable GaInAsSb alloys for medium IR-range photodetectors

The features of growth of GaInAsSb alloy with In content as high as 25 mol % lattice-matched to GaSb by molecular beam epitaxy are studied. These alloys are promising for use as the active region of photodetector structures of the mid-infrared range. The results of the study of these alloys by double-crystal X-ray diffractometry, scanning electron microscopy, and photoluminescence are presented. It is shown that the Ga{sub x}In{sub 1-x}As{sub y}Sb{sub 1-y} alloys with x < 0.8 grown at 500 deg. C show the degradation of structural and optical properties as the layer thickness is increased. In layers with thicknesses above the critical one, spinodal decomposition is observed in complete agreement with thermodynamic calculations of the location of the boundaries of immiscibility regions. The possibilities to optimize the molecular beam growth of the Ga{sub x}In{sub 1-x}As{sub y}Sb{sub 1-y} alloys (x < 0.75) with high optical and structural quality, as well as the characteristics of photodetectors based on the GaInAsSb/AlGaAsSb heterostructures, are discussed.

36 MATERIALS SCIENCE↗

Crystal perfection of GaP films grown on Si substrates by solid-source MBE with atomic hydrogen

GaP films have been grown by migration-enhanced epitaxy on Si (001) substrates tilted by 6{sup o} about the <011> axis. High-energy electron diffraction, transmission electron microscopy, and X-ray diffraction analysis were used to demonstrate that introduction of atomic hydrogen in the course of epitaxy markedly improves the overall structural quality of GaP films. Up to thicknesses of about 0.1 {mu}m, the full width at half-maximum of the (004) reflection in the X-ray diffraction pattern of these films almost coincides with the theoretical value for defect-free films, which indicates that their state is nearly pseudomorphic.

36 MATERIALS SCIENCE↗

Utilization of blended fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash in geopolymer

In this paper, synthesis of geopolymer from fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash was studied in order to effectively utilize both ashes. FBC-fly ash and bottom ash were inter-ground to three different finenesses. The ashes were mixed with as-received PCC-fly ash in various proportions and used as source material for synthesis of geopolymer. Sodium silicate (Na{sub 2}SiO{sub 3}) and 10 M sodium hydroxide (NaOH) solutions at mass ratio of Na{sub 2}SiO{sub 3}/NaOH of 1.5 and curing temperature of 65 deg. C for 48 h were used for making geopolymer. X-ray diffraction (XRD), scanning electron microscopy (SEM), degree of reaction, and thermal gravimetric analysis (TGA) were performed on the geopolymer pastes. Compressive strength was also tested on geopolymer mortars. The results show that high strength geopolymer mortars of 35.0-44.0 MPa can be produced using mixture of ground FBC ash and as-received PCC-fly ash. Fine FBC ash is more reactive and results in higher degree of reaction and higher strength geopolymer as compared to the use of coarser FBC ash. Grinding increases reactivity of ash by means of increasing surface area and the amount of reactive phase of the ash. In addition, the packing effect due to fine particles also contributed to increase in strength of geopolymers.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electronic properties and bonding characteristics of AlN:Ag thin film nanocomposites

We present theoretical and experimental results on the bonding and structural characteristics of AlN:Ag thin film nanocomposites obtained by means of density functional theory (DFT) computations, high resolution transmission electron microscopy (HRTEM) observations, Auger electron spectroscopy (AES), and x-ray diffraction (XRD) measurements. From the theoretical calculations it was determined that the presence of the Ag substitutional of N or Al atoms affects the electronic density of states (EDOS) of the resulting systems. In particular, occupied energy states are introduced (between others) that lie within the energy gap of the AlN matrix due to Ag-d, Al-p (accompanied with a charge transfer from Al to Ag), Ag-p, and N-p hybridizations, respectively. The effect is predicted to be even more pronounced in the case of Ag nanoparticle inclusions affecting the EDOS of the composite system. These predictions were verified by the HRTEM images that gave unequivocal evidence for the presence and stability of Ag nanoparticles in the AlN matrix. In addition, the AES data suggested a metal-metal (Ag-Al) bonding preference, while the XRD patterns revealed that the atomic Ag dispersions in the AlN thin films results in a small elongation of the Wurtzite lattice, which is in agreement with the DFT predictions. These results may useful in tailoring the electronic response of AlN-based systems and the design of devices for various opto-electronic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Facile synthesis of Cu{sub 2}O nanocube/polycarbazole composites and their high visible-light photocatalytic properties

Cu{sub 2}O nanocube/polycarbazole composites have been prepared by an one-pot solvothermal process using carbazole as a reductant. The polycarbazole layer not only protected and stabilized Cu{sub 2}O particles, but also prohibited the recombination of photogenerated electrons-holes pair and facilitated interfacial charge transfer between polycarbazole and Cu{sub 2}O. The composition, structure and morphology of the obtained products was systematically studied by X-ray powder diffraction (XRD), Field-emission scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HRTEM), Fourier transformation infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and UV-visible spectrophotometer. Furthermore, the visible-light photocatalytic behavior of the Cu{sub 2}O nanocube/polycarbazole composites on the methyl orange was investigated. - Graphical abstract: The uniform and monodisperse Cu{sub 2}O nanocube/polycarbazole composites were prepared by an one-pot solvothermal process. As covered by polycarbazole, the photocatalytic activities of Cu{sub 2}O nanocubes were improved. The polycarbazole not only protected and stabilized Cu{sub 2}O cubes, but also prohibited the recombination of photogenerated electrons-holes pair and facilitated interfacial charge transfer between polycarbazole and Cu{sub 2}O. Highlights: > The Cu{sub 2}O/polycarbazole nanocube composite has a better photocatalytic activity. > We obtained the composite by an one-pot solvothermal process. > Carbazole monomers as reductants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗