Search NASA⌕ Search

SEARCH · Search NASA

Results for “composite optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Redox oxide@molten salt as a generalized catalyst design strategy for oxidative dehydrogenation of ethane via selective hydrogen combustion

Here, the current study demonstrates a redox oxide @ molten salt core-shell architecture as a generalized redox catalyst design strategy for chemical looping – oxidative dehydrogenation of ethane. 17 combinations of redox active oxides and molten salts were prepared, evaluated, and characterized. X-ray diffraction indicates that the redox oxides and molten salts are fully compatible, forming separate and stable phases. X-ray photoelectron spectroscopy demonstrates that the molten salts aggregate at the redox oxide surface, forming a core-shell structure to block the non-selective sites responsible for CO x formation. Up to ~74% single-pass olefin yields were achieved using the proposed redox catalyst design strategy. Statistical analyses of the performance data indicate the potential to achieve up to 86.7% single-pass yield by simply optimizing the operating conditions using the redox catalysts reported in this study. Meanwhile, the generalizability of the catalyst design strategy offers exciting opportunities to further optimize the composition and performance of the redox catalysts for ethane ODH under a chemical looping scheme with significantly reduced energy consumption and CO 2 emissions.

03 NATURAL GAS↗

Understanding the Origin of Negative Temperature Dependence and Activity of N-Coordinated Cobalt Sites During Ethylene Dimerization

The on-demand production of short-chain linear alpha olefins (LAOs; C4-C8) via C2H4 dimerization and oligomerization is industrially attractive, prompting extensive research on designing active, selective, and stable catalysts for industrial use. Cobalt supported on ammoniated carbon (Co(NH3)x/C) catalysts have shown remarkable activity and selectivity in this process. However, critical aspects such as the active phase, active site structure, the role of the catalyst support, cobalt loading effects, and the inverse correlation of the reaction rate with temperature remain inadequately understood. This study systematically explores these factors using a combination of steady-state differential catalytic tests, in situ molecular characterization including diffuse reflectance UV-Vis (DR-UV-Vis), Infrared, and Raman spectroscopies, and ex situ X-ray diffraction (XRD) and high annular aberration-corrected dark field transmission electron microscopy (HAADF-STEM). Various supports (SiO2, Al2O3, NH4-ZSM-5, g-C3N4, and C) and cobalt loadings (1.0-3.0 Co nm-2) were studied to determine the optimal catalyst composition and identify the active phase and sites. Carbon-supported catalysts uniquely produce C4-8 LAOs during C2H4 dimerization, with site-time-yield remaining constant (~10-3 s-1) for 1.0-4.0 Co nm-2 at prolonged reaction times (24-48?h time-on-stream). At higher loadings of 6.0 Co nm-2, the formation of crystalline CoO and Co3O4 phases reduces catalytic activity and LAO selectivity. Our findings show that active catalysts lack crystalline cobalt oxides and instead feature dispersed Co2+ sites, tetra-coordinated to a mix of N/NH3 and O/H2O ligands, which catalyze C2H4 dimerization via the Cossee-Arlman mechanism, exhibiting 1st order dependence on C2H4 concentration. The observed inverse rate-temperature correlation is attributed to compensation effects (i.e., presence of Cremer-Constable relationship) linked to changes in adsorption enthalpic and entropic factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale metrologies for process optimization of carbon nanotube polymer composites

Carbon nanotube (CNT) polymer nanocomposites are attractive multifunctional materials with a growing range of commercial applications. With the increasing demand for these materials, it is imperative to develop and validate methods for on-line quality control and process monitoring during production. In this work, a novel combination of characterization techniques is utilized, that facilitates the non-invasive assessment of CNT dispersion in epoxy produced by the scalable process of calendering. First, the structural parameters of these nanocomposites are evaluated across multiple length scales (10 -10 m to 10 -3 m) using scanning gallium-ion microscopy, transmission electron microscopy and small-angle neutron scattering. Then, a non-contact resonant microwave cavity perturbation (RCP) technique is employed to accurately measure the AC electrical conductivity of the nanocomposites. Quantitative correlations between the conductivity and structural parameters find the RCP measurements to be sensitive to CNT mass fraction, spatial organization and, therefore, the processing parameters. These results, and the non-contact nature and speed of RCP measurements identify this technique as being ideally suited for quality control of CNT nanocomposites in a nanomanufacturing environment. In conclusion, when validated by the multiscale characterization suite, RCP may be broadly applicable in the production of hybrid functional materials, such as graphene, gold nanorod, and carbon black nanocomposites.

36 MATERIALS SCIENCE↗

Insights from in-situ X-ray computed tomography during axial impregnation of unidirectional fiber beds

In-situ X-ray computed tomography during axial impregnation of unidirectional fiber beds is used to study coupled effects of fluid velocity, fiber movement and preferred flow channeling on permeability. Here, in order to interpret the experimental measurements, a new computational tool for predicting axial permeability of very large 2D arrays of non-uniformly packed fibers is developed. The results show that, when the impregnation velocity is high, full saturation is attained behind the flow front and the fibers rearrange into a less uniform configuration with higher permeability. In contrast, when the velocity is low, fluid flows preferentially in the narrowest channels between fibers, yielding unsaturated permeabilities that are lower than those in the saturated state. Lastly, these insights combined with a new computational tool will enable improved prediction of permeability, ultimately for use in optimization of composite manufacturing via liquid impregnation.

36 MATERIALS SCIENCE↗

Promising performance of sulfide catholytes compared to halide alternatives in NMC811 cathodes for sheet-type sulfide solid-state batteries

Sulfide-based solid-state batteries (SSBs) show promise in achieving energy densities over 350 Wh/kg, yet challenges persist with their incorporation of high-voltage, nickel-rich layered oxide cathodes, such as LiNi₀.₈Mn₀.₁Co₀.₁O₂ (NMC811), due to the poor oxidation stability of sulfide solid-state electrolytes (SSEs) like Li₆PS₅Cl (LPSCl). Although halide SSEs such as Li₃InCl₆ (LIC) and Li₃YCl₆ (LYC) have previously shown promise in stabilizing high-voltage NMC cathodes, our research reveals that sulfide SSE catholytes, particularly when combined with surface-coated NMC cathodes, deliver superior performance. Here, this investigation assesses the cycling stability of various catholytes—LPSCl, LIC, Li₁₀GeP₂S₁₂ (LGPS), combined LIC-LPSCl, and LYC-LPSCl—in SSBs with LiNbO₃-coated NMC811 cathodes against sheet-type LPSCl separators. Findings indicate that while LGPS-based cathodes maintain higher capacity retention, they yield lower deliverable capacity, and LIC cathodes experience significant electrochemical degradation. Importantly, our results underscore that sulfide SSE catholytes, in conjunction with LiNbO₃-coated cathodes, optimize the cathode-electrolyte interphase (CEI), enhancing both kinetics and mass transport. These insights provide a strategic direction for optimizing catholyte composition in the development of sheet-type sulfide-based SSBs.

Catholyte↗

Soft matter approach for creating novel protein hydrogels using fractal whey protein assemblies as building blocks

In this study, mesoscopic sized fractal assembly (FA) particles were prepared using whey protein isolate; the coldset gelation properties of FA particles were investigated in-depth. Two types of FA particles (FA -62 and FA -90) with different mean sizes were synthesized through controlled thermal treatment of whey protein solutions at two concentrations (62 g/L and 90 g/L). Particle characteristics e.g. hydrodynamic radius, ζ-potential and surface hydrophobicity were dependent on pH and structure of FA. Transmission electron microscopy (TEM) observation confirmed the fractal morphology and small-angle X-ray scattering (SAXS) analysis suggested an internal fractal structure for the obtained FA particles. Eight cold-set FA protein gels (2 % w/v) were manufactured by controlling two gelling factors at two levels: pH (5.8 and 7.0) and Ca 2+ content (5 mM and 10 mM). Rheological characteristics in the large amplitude oscillatory shear regime revealed that pH 7.0 gels were softer and elastic while pH 5.8 gels were harder and brittle. Rheology Pipkin diagrams demonstrated that the strain softening/stiffening and the shear-thinning/thickening behaviors may be fine-tuned by manipulating the key gelation factors: e.g. FA structure, pH, and Ca 2+ . The entrainment speed-dependent friction coefficient curves showed that at an intermediate velocity regime (6-250 mm s -1 ), FA -90 particles induced hydrogels had superior lubrication effect compared to FA -62 gels. Further, this work demonstrated a food structure design approach regarding tuning texture and lubrication properties of protein gels without changing protein content and protein composition. The optimized protein hydrogels may be used as texturizer for "cleaner label" food formulas and/or as delivery system for carrying micronutrients.

60 APPLIED LIFE SCIENCES↗

Enhanced catalytic performance of Zr modified CuO/ZnO/Al 2 O 3 catalyst for methanol and DME synthesis via CO 2 hydrogenation

Zirconium (Zr) modified CuO/ZnO/Al 2 O 3 (CZA) catalysts with different aluminum (Al) and Zr contents were synthesized by the co-precipitation method. The synthesized CuO/ZnO/ZrO 2 /Al 2 O 3 (CZZA) catalysts were comprehensively characterized and studied for methanol synthesis via CO 2 hydrogenation. The CZZA catalyst showed the highest methanol yield of 12.4 % at 220 °C and 2.76 MPa with an optimized catalyst composition of Cu/Zn/Zr/Al (atomic ratio) at 4:2:1:0.5. The CZZA catalyst showed better activity than that of the CZA catalyst and a superior stability for methanol synthesis. There was no decrease in the BET surface area and very little coke formation for the spent CZZA catalyst, after 300 h of methanol synthesis. Bifunctional catalysts, composed of CZZA and HZSM-5, were investigated for dimethyl ether (DME) synthesis directly from CO 2 hydrogenation, and a maximum DME yield of 18.3 % was obtained at a reaction temperature of 240 °C and a pressure of 2.76 MPa. The stability of the bifunctional CZZA and HZSM-5 catalyst during the DME synthesis also significantly improved, as compared to that of the CZA and HZSM-5. A significant decrease in the BET surface area and an increase in coking on the spent CZZA catalyst were observed after 100 h of DME synthesis, indicating a detrimental effect on CZZA stability when a HZSM-5 catalyst was present. The changes in structural properties (e.g., BET surface area and crystallinity) and coking for HZSM-5 could be responsible for the deactivation of the bifunctional catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enabling fast discharge of Li-ion batteries via electrolyte formulations for urban air mobility applications

High-power discharge requirements are critical for lithium-ion batteries (LIBs) used in electric Vertical Takeoff and Landing (eVTOL) vehicles that are increasingly considered in urban mobility. This investigation places a particular emphasis on understanding the impact of electrolytes on discharge processes and rate capability. We aim to compare the discharge behavior of LiBs using a conventional electrolyte (Gen 2: 1.2 M LiPF 6 in EC:EMC) and the dual salt LiTFSI-LiBOB-based electrolyte. Here we carefully examine the profiles of charging and discharging, the behavior during extended cycles, impedance spectroscopy results, and the characteristics of the electrode surface. Our research findings demonstrate the complex relationship between the composition of electrolytes and the specific high-power discharge requirements of electric vertical takeoff and landing (eVTOL) systems. This research highlights the importance of customizing electrolyte compositions to optimize energy storage density while simultaneously enabling higher power extraction to enhance performance in short-range electric aviation.

25 ENERGY STORAGE↗

Chemically Inert Hydrocarbon-Based Slurries for Rapid Laser Sintering of Thin Proton-Conducting Ceramics

The process of rapid laser sintering of thin BaZrO 3 –BaCeO 3 -based proton-conducting electrolytes is being developed for easy fabrication of ceramic fuel cells and electrolyzers. However, cracks on the electrolytes caused by volume change due to chemical reactions between the basic ceramic constituents and the polar solvents during wet processing has been problematic. In order to address this issue, the use of chemically inert saturated-hydrocarbon-based slurries comprised of hexadecane, polybutene, and a long-chain saturated fatty acid were investigated in this work. By optimizing slurry composition and laser sintering conditions, a 20 mm long, 4 mm wide, 13.5-μm-thick and 97%-dense BaCe 0.7 Zr 0.1 Y 0.07 Sm 0.13 O 3-d membrane showing proton conductivity on the order of 10 –4 S•cm –1 at 600 °C was successfully prepared in just three seconds by laser sintering. As a result, the use of saturated-hydrocarbon-based slurries will facilitate wet processing and rapid laser sintering of proton-conducting ceramic electrolytes.

36 MATERIALS SCIENCE↗

High thermoelectric performance in (Bi 0.25 Sb 0.75 ) 2 Te 3 due to band convergence and improved by carrier concentration control

Bi 2 Te 3 has been recognized as an important cooling material for thermoelectric applications. Yet its thermoelectric performance could still be improved. Here we propose a band engineering strategy by optimizing the converging valence bands of Bi 2 Te 3 and Sb 2 Te 3 in the (Bi 1-x Sb x ) 2 Te 3 system when x = 0.75. Band convergence successfully explains the sharp increase in density-of-states effective mass yet relatively constant mobility and optical band gap measurement. This band convergence picture guides the carrier concentration tuning for optimum thermoelectric performance. To synthesize homogeneous textured and optimally doped (Bi 0.25 Sb 0.75 ) 2 Te 3 , excess Te was chosen as the dopant. Uniform control of the optimized thermoelectric composition was achieved by zone-melting which utilizes separate solidus and liquidus compositions to obtain zT = 1.05 (at 300 K) without nanostructuring.

36 MATERIALS SCIENCE↗

PBI nanofiber mat-reinforced anion exchange membranes with covalently linked interfaces for use in water electrolysers

Anion exchange membranes (AEM) are key components in anion exchange membrane water electrolysers. Recently developed materials are less susceptible to the alkaline degradation of the polymer backbone and quaternary ammonium groups. A remaining challenge is the mechanical stability in contact with hot water and dimensional stability when the temperature of the feed solution changes. One solution is to reinforce membranes with a porous support. Since support materials like PEEK or PTFE have a different swelling behavior than the matrix and no strong interactions with the matrix, voids can form, and gas crossover increases. In this work, we approach this issue by pore filling polybenzimidazole nanofiber mats with the bromomethylated precursor of mTPN, an ultra-stable AEM material. During drying, a covalent interaction between support (PBI amine groups) and matrix (-CH 2 Br) is established. After quaternization, the optimized PBI/mTPN-50.120 composite membrane still shows a high conductivity of 62 mS cm –1 , but 37% reduced length swelling in comparison to the non-reinforced membrane. Tensile strength and Young's modulus increase 17% and 56% to 49 MPa and 680 MPa, respectively. In an electrolyser, a stable voltage of 1.98V at 0.25 A cm –2 was achieved, and no change in membrane resistance was observed over the test time of 200 h (50°C, 1 M KOH, catalysts based on Ni/Fe and Mo).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of alloying on intrinsic ductility in WTaCrV high entropy alloys

Tungsten (W) exhibits desirable properties for extreme applications, such as the divertor in magnetic fusion reactors, but its practicality remains limited due to poor formability and insufficient irradiation resistance. In this work, we study the intrinsic ductility of body-centered cubic WTaCrV based high entropy alloys (HEAs), which are known to exhibit excellent irradiation resistance. The ductility evaluations are carried out using a criterion based on the competition between the critical stress intensity factors for emission (K Ie ) and cleavage (K Ic ) in the {110} slip planes and {110} crack planes, which are evaluated within the linear elastic fracture mechanics framework and computed using density functional theory. The results suggest that increasing the alloying concentrations of V and reducing the concentrations of W can significantly improve the ductility in these HEAs. The elastic anisotropy for these HEAs is analyzed using the Zener anisotropy ratio and its correlation with the concentration of W in the alloys is studied. Results indicate that these alloys tend to be fairly isotropic independently from the concentration of W in them. The computed data for the elastic constants of these HEAs is also compared against available experimental data. The results are in good agreement, validating the robustness and accuracy of the computational methods. Multiple phenomenological ductility metrics were also computed and analyzed against the analytical model. Some metrics, mainly the surrogate D parameter, show a good correlation with the Rice model. The potential of these empirical metrics to serve as surrogate screening models for optimizing the compositional space is also discussed.

Anisotropy↗

Survey of carbonization facilities for municipal solid waste treatment in Japan

The operations of carbonization facilities for municipal solid waste treatment in Japan were examined. Input waste, system processes, material flows, quality of char and its utilization, fuel and chemical consumption, control of facility emissions, and trouble areas in facility operation were investigated and analyzed. Although carbonization is a technically available thermochemical conversion method for municipal solid waste treatment, problems of energy efficiency and char utilization must be solved for carbonization to be competitive. Possible solutions include (1) optimizing the composition of input waste, treatment scale, organization of unit processes, operational methods, and quality and yield of char on the basis of analysis and feedback of long-term operating data of present operating facilities and (2) securing stable char demands by linking with local industries such as thermal electric power companies, iron manufacturing plants, and cement production plants.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Optimization of Tape Casting for Fabrication of Li 6.25 Al 0.25 La 3 Zr 2 O 12 Sheets

Tape casting is an attractive technology for the scalable manufacturing of thin lithium garnet electrolyte (LLZO) layers for solid state battery applications. Processing of LLZO is complicated by many factors including lithium volatilization, abnormal grain growth, and phase instability, which are exacerbated by high surface area to volume ratios. In this work a sintering protocol for commercially available Li 6.25 Al 0.25 La 3 Zr 2 O 12 Sheets (Al-LLZO) powder was developed that requires no mother-powder covering or externally applied pressure. MgO was investigated as a sintering additive to improve density and ionic conductivity of the Al-LLZO sheets and produce a fine-grained microstructure. Al-LLZO sheets with 5 wt % MgO had densities of > 90% and ionic conductivity > 2 × 10 -4 S/cm. The optimized ceramic composition and sintering protocol were used to compare several tape casting binder systems. A "green"water-based system using methylcellulose as a binder was developed with green and final properties comparable to those obtained with solvent-based systems.

25 ENERGY STORAGE↗

Evaluation of In Silico Multifeature Libraries for Providing Evidence for the Presence of Small Molecules in Synthetic Blinded Samples

The current gold standard for unambiguous molecular identification in metabolomics analysis is comparing two or more orthogonal properties from the analysis of authentic reference materials (standards) to experimental data acquired in the same laboratory with the same analytical methods. This represents a significant limitation for comprehensive chemical identification of small molecules in complex samples. The process is time-consuming and costly, and the majority of molecules are not yet represented by standards. Thus, there is a need to assemble evidence for the presence of small molecules in complex samples through the use of libraries containing calculated chemical properties. To address this need, we developed a Multi-Attribute Matching Engine (MAME) and a library derived in-part from our in silico Chemical Library Engine (ISiCLE). Here, we describe an initial evaluation of these methods in a blinded analysis of synthetic chemical mixtures as part of the U.S. Environmental Protection Agency’s (EPA) Non-Targeted Analysis Collaborative Trial (ENTACT, Phase 1). For molecules in all mixtures, the initial blinded false negative rate (FNR), false discovery rate (FDR), and accuracy were 57%, 77%, and 91%, respectively. For high evidence scores, the FDR was 35%. After unblinding of the sample compositions, we optimized the scoring parameters to better exploit the available evidence, and increased the accuracy for molecules suspected as present. The final FNR, FDR, and accuracy were 67%, 53%, and 96%, respectively. For high evidence scores, the FDR was 10%. This study demonstrates that multi-attribute matching methods in conjunction with in silico libraries may one day enable reduced reliance on experimentally-derived libraries for building evidence for the presence of molecules in complex samples.

Nunez, Jamie↗

Influence of Water Transport Across Microscale Bipolar Interfaces on the Performance of Direct Borohydride Fuel Cells

Direct borohydride fuel cells (DBFCs) can operate at double the voltage of proton exchange membrane fuel cells (PEMFCs) by employing an alkaline NaBH 4 fuel feed and an acidic H 2 O 2 oxidant feed. The pH-gradient-enabled microscale bipolar interface (PMBI) facilitates the creation and maintenance of an alkaline environment at the anode and an acidic environment at the cathode for the borohydride oxidation and peroxide reduction reactions. However, given the need to dissociate water at the interface to ensure ionic conduction, PMBI can be efficient only when anion exchange ionomer (AEI) moieties enable fast water transport for autoprotolysis. Herein, a series of polynorbornene-based AEIs with a range of water uptake values are examined to unravel the optimum water uptake required to enable high performance DBFCs. The DBFC with PMBI configuration containing the optimal AEI composition delivers a current density of 302 mA cm –2 at 1.5 V and a peak power density of 580 mW cm –2 at 1 V. This AEI composition exhibits high hydroxide ionic conductivity of 90.7 mS cm –1 at 80 °C with an IEC of 2.01 mequiv g –1 and demonstrates impressive chemical stability by retaining 98.75% of its initial ionic conductivity after immersion into anolyte (3 M KOH and 1.5 M NaBH 4 ) at 70 °C for 536 h.

25 ENERGY STORAGE↗

Deciphering the Mechanistic Role of Individual Oxide Phases and Their Combinations in Supported Mn–Na 2 WO 4 Catalysts for Oxidative Coupling of Methane

Oxidative coupling of methane (OCM) is an attractive direct route for upgrading methane to valuable chemicals. In this study, Temporal Analysis of Products (TAP) and steady state experiments are conducted to understand the role of individual oxide phases and their combinations in supported Mn-Na 2 WO 4 /SiO 2 catalysts for OCM. The results from TAP transient kinetic studies indicate that Mn plays an important role in promoting gas phase oxygen activation, while NaO x /SiO 2 and WO x /SiO 2 are relatively inert towards gas phase oxygen and methane activation. However, the supported catalyst combining Na and W in the form Na 2 WO 4 show enhanced gas phase oxygen activation exhibiting a much lower oxygen activation energy (148 kJ/mol) and enhanced activity toward methane activation as compared to the individual supported oxide catalysts. Addition of Mn to Na 2 WO 4 /SiO 2 further decreases the oxygen activation energy by 40 kJ/mol. Moreover, methane activation is also enhanced with CH 3 as the main intermediate but, with increasing Mn content, more CH 2 intermediates are observed. Different forms of oxygen (both dioxygen and atomic) are detected on the catalyst surface using isotopic pump/probe pulsing and their distribution is found to depend on the catalyst composition. An optimal Mn content in the Na 2 WO 4 /SiO 2 catalyst system is needed to enhance the amount of dioxide surface species (e.g., superoxide 16 O 2 - or peroxide 16 O 2 2- ) associated with the Na 2 WO 4 leading to high C 2 selectivity for OCM. When the Mn content is too high, the larger MnOx domains are shown to contribute to the formation of higher concertation of monoxide surface species that lead to nonselective OCM pathways. This insight from transient kinetic characterization using TAP combined with conventional steady state studies, provides a deeper understanding of the role of individual oxide phases and their combination on supported catalysts toward the formation of intermediate surface species and their impact on the OCM reaction mechanism. This knowledge is critical toward designing superior catalyst formulations for OCM.

10 SYNTHETIC FUELS↗