Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer programming integrity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Integrated Composite Analyzer (ICAN): Users and programmers manual

The use of and relevant equations programmed in a computer code designed to carry out a comprehensive linear analysis of multilayered fiber composites is described. The analysis contains the essential features required to effectively design structural components made from fiber composites. The inputs to the code are constituent material properties, factors reflecting the fabrication process, and composite geometry. The code performs micromechanics, macromechanics, and laminate analysis, including the hygrothermal response of fiber composites. The code outputs are the various ply and composite properties, composite structural response, and composite stress analysis results with details on failure. The code is in Fortran IV and can be used efficiently as a package in complex structural analysis programs. The input-output format is described extensively through the use of a sample problem. The program listing is also included. The code manual consists of two parts.

Murthy, P. L. N.↗
NASA NTRS1989

An integrated CFD/experimental analysis of aerodynamic forces and moments

Aerodynamic analysis using computational fluid dynamics (CFD) is most fruitful when it is combined with a thorough program of wind tunnel testing. The understanding of aerodynamic phenomena is enhanced by the synergistic use of both analysis methods. A technique is described for an integrated approach to determining the forces and moments acting on a wind tunnel model by using a combination of experimentally measured pressures and CFD predictions. The CFD code used was FLO57 (an Euler solver) and the wind tunnel model was a heavily instrumented delta wing with 62.5 deg of leading-edge sweep. A thorough comparison of the CFD results and the experimental data is presented for surface pressure distributions and longitudinal forces and moments. The experimental pressures were also integrated over the surface of the model and the resulting forces and moments are compared to the CFD and wind tunnel results. The accurate determination of various drag increments via the combined use of the CFD and experimental pressures is presented in detail.

Melton, John E.↗
NASA NTRS1973

Advanced hydrogen/oxygen thrust chamber design analysis

The results are reported of the advanced hydrogen/oxygen thrust chamber design analysis program. The primary objectives of this program were to: (1) provide an in-depth analytical investigation to develop thrust chamber cooling and fatigue life limitations of an advanced, high pressure, high performance H2/O2 engine design of 20,000-pounds (88960.0 N) thrust; and (2) integrate the existing heat transfer analysis, thermal fatigue and stress aspects for advanced chambers into a comprehensive computer program. Thrust chamber designs and analyses were performed to evaluate various combustor materials, coolant passage configurations (tubes and channels), and cooling circuits to define the nominal 1900 psia (1.31 x 10 to the 7th power N/sq m) chamber pressure, 300-cycle life thrust chamber. The cycle life capability of the selected configuration was then determined for three duty cycles. Also the influence of cycle life and chamber pressure on thrust chamber design was investigated by varying in cycle life requirements at the nominal chamber pressure and by varying the chamber pressure at the nominal cycle life requirement.

Shoji, J. M.↗
DOE OSTI2025

Tough Errors Are no Match (TEAM): Optimizing the Quantum Compiler for Noise Resilience

This report summarizes research performed under the Tough Errors Are no Match (TEAM) project. The primary focus of TEAM has been to research and develop a compilation toolbox leveraging techniques from quantum characterization and control, probabilistic programming, and approximate computing. Our goal was to develop robust protocols that can be integrated into quantum compilers to optimize and enhance the robustness of noisy computation. Here, we provide a summary of TEAM work focused on characterization and control of quantum systems.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1971

Numerical analysis of shells of revolution.

Summary of some of the major computer programs in existence for the analysis of shells of revolution based on numerical integration and finite-difference procedures. Selected results obtained with several of these programs are presented. A number of significant points is made on the basis of these results.

Fulton, R. E.↗
NASA NTRS1975

Banning design automation software implementation

The research is reported for developing a system of computer programs to aid engineering in the design, fabrication, and testing of large scale integrated circuits, hybrid circuits, and printed circuit boards. The automatic layout programs, analysis programs, and interface programs are discussed.

Kuehlthau, R. L.↗
NASA NTRS1977

Experimental and analytical investigations to improve low-speed performance and stability and control characteristics of supersonic cruise fighter vehicles

Small- and large-scale models of supersonic cruise fighter vehicles were used to determine the effectiveness of airframe/propulsion integration concepts for improved low-speed performance and stability and control characteristics. Computer programs were used for engine/airframe sizing studies to yield optimum vehicle performance.

Graham, A. B.↗
NASA NTRS1980

Development and implementation of Shuttle/IUS proximity operations flight design software

The High Fidelity Relative Motion Program (HFRMP), a trajectory/attitude numerical integration program, was developed and implemented on the MPAD HP-9825A desk top computer systems. A solar and a lunar ephemeris is included in the HFRMP along with models of the oblate Earth, a rotating atmosphere, the orbiter's OMS/RCS/DAP system, orbiter vents, rotor dynamics, and upper stage propulsion systems. Although designed primarily for the analysis of proximity operations, it is useful in other areas such as attitude/stability analysis, propulsive consumables estimation, and trajector perturbation studies. An unique identification was assigned to each of the various configurations of the HFRMP that were developed to test new techniques and algorithms are briefly described. These include the HFRMP Versions 03H, 03M, 03T, 03U, and 05D. Development of orbiter/upper stage separation techniques including flight design support for the TDRS-A and Galileo deployment flights and design of standard maneuver sequences is discussed. Also, the development and implementation of the Euler angle conversion program is briefly addressed.

Wilson, S. W.↗
NASA NTRS1990

Computer code for predicting coolant flow and heat transfer in turbomachinery

A computer code was developed to analyze any turbomachinery coolant flow path geometry that consist of a single flow passage with a unique inlet and exit. Flow can be bled off for tip-cap impingement cooling, and a flow bypass can be specified in which coolant flow is taken off at one point in the flow channel and reintroduced at a point farther downstream in the same channel. The user may either choose the coolant flow rate or let the program determine the flow rate from specified inlet and exit conditions. The computer code integrates the 1-D momentum and energy equations along a defined flow path and calculates the coolant's flow rate, temperature, pressure, and velocity and the heat transfer coefficients along the passage. The equations account for area change, mass addition or subtraction, pumping, friction, and heat transfer.

Meitner, Peter L.↗
NASA NTRS1992

System model development for nuclear thermal propulsion

A critical enabling technology in the evolutionary development of nuclear thermal propulsion (NTP) is the ability to predict the system performance under a variety of operating conditions. This is crucial for mission analysis and for control subsystem testing as well as for the modeling of various failure modes. Performance must be accurately predicted during steady-state and transient operation, including startup, shutdown, and post operation cooling. The development and application of verified and validated system models has the potential to reduce the design, testing, and cost and time required for the technology to reach flight-ready status. Since Oct. 1991, the U.S. Department of Energy (DOE), Department of Defense (DOD), and NASA have initiated critical technology development efforts for NTP systems to be used on Space Exploration Initiative (SEI) missions to the Moon and Mars. This paper presents the strategy and progress of an interagency NASA/DOE/DOD team for NTP system modeling. It is the intent of the interagency team to develop several levels of computer programs to simulate various NTP systems. The first level will provide rapid, parameterized calculations of overall system performance. Succeeding computer programs will provide analysis of each component in sufficient detail to guide the design teams and experimental efforts. The computer programs will allow simulation of the entire system to allow prediction of the integrated performance. An interagency team was formed for this task to use the best capabilities available and to assure appropriate peer review.

Walton, James T.↗
NASA NTRS1993

COSMIC monthly progress report

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of August, 1993. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are discussed. Ten articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: (1) MOM3D - A Method of Moments Code for Electromagnetic Scattering (UNIX Version); (2) EM-Animate - Computer Program for Displaying and Animating the Steady-State Time-Harmonic Electromagnetic Near Field and Surface-Current Solutions; (3) MOM3D - A Method of Moments Code for Electromagnetic Scattering (IBM PC Version); (4) M414 - MIL-STD-414 Variable Sampling Procedures Computer Program; (5) MEDOF - Minimum Euclidean Distance Optimal Filter; (6) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (Macintosh Version); (7) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (IBM PC Version); (8) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (UNIX Version); (9) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (DEC VAX VMS Version); and (10) TFSSRA - Thick Frequency Selective Surface with Rectangular Apertures. Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and dissemination are also described along with a budget summary.

Source record↗
NASA NTRS2003

Discovery Systems

A viewgraph presentation on NASA's Discovery Systems Project is given. The topics of discussion include: 1) NASA's Computing Information and Communications Technology Program; 2) Discovery Systems Program; and 3) Ideas for Information Integration Using the Web.

Pell, Barney↗
NASA NTRS1973

Integrated Digital Flight Control System for the Space Shuttle Orbiter

The objectives of the integrated digital flight control system (DFCS) is to provide rotational and translational control of the space shuttle orbiter in all phases of flight: from launch ascent through orbit to entry and touchdown, and during powered horizontal flights. The program provides a versatile control system structure while maintaining uniform communications with other programs, sensors, and control effectors by using an executive routine/functional subroutine format. The program reads all external variables at a single point, copies them into its dedicated storage, and then calls the required subroutines in the proper sequence. As a result, the flight control program is largely independent of other programs in the computer complex and is equally insensitive to characteristics of the processor configuration. The integrated structure is described of the control system and the DFCS executive routine which embodies that structure. The input and output, including jet selection are included. Specific estimation and control algorithm are shown for the various mission phases: cruise (including horizontal powered flight), entry, on-orbit, and boost. Attitude maneuver routines that interface with the DFCS are included.

Source record↗
NASA NTRS1987

A generic applications subroutine library for the MPP

A new methodology to increase the utility of the Massively Parallel Processor (MPP) was developed, and is presented as an addition to the current methods of using the MPP. This methodology provides for the development of an MPP side abstraction layer that is callable from any host side high level language. Routines in the abstraction layer have the option of using a powerful software tool for accessing the stager as virtual memory. An additional abstraction layer that allows for remote access to the MPP via DECnet is discussed. This integrated approach to programming the MPP is a valuable tool for the implementation of interactive user driver systems that require the computational capabilities of the MPP as well as a controlled user view. It is expected that this methodology will be used to integrate the MPP into many such systems, and thus promote greater use of the MPP by scientific researchers who are accustomed to user friendly environments.

Gough, Michael L.↗
NASA NTRS1988

An integrated approach to the synthesis of geometrically non-linear structures

An integrated approach to the minimum weight design of geometrically nonlinear three-dimensional truss structures with geometric imperfections, subject to inequality constraints on static displacements, stresses, local buckling and cross sectional areas, is investigated. The integrated structural synthesis problem involves design and response quantities as independent variables and equilibrium equations, describing the finite element model, as equality constraints. The nonlinear structural analysis and the optimization are thus merged together into a single process. A computer program developed to compute the constraint values and analytical gradients is coupled with a generalized reduced gradient algorithm to solve the integrated problem. Numerical results for a geometrically nonlinear shallow dome example problem are presented for various types of imperfections. Furthermore, it is found that the algorithm is capable of detecting and guarding against system as well as element elastic instability using equilibrium information only, that is, without imposing system and local buckling inequality constraints.

Smaoui, H.↗
NASA NTRS1991

An integrated decision support system for TRAC: A proposal

Optimal allocation and usage of resources is a key to effective management. Resources of concern to TRAC are: Manpower (PSY), Money (Travel, contracts), Computing, Data, Models, etc. Management activities of TRAC include: Planning, Programming, Tasking, Monitoring, Updating, and Coordinating. Existing systems are insufficient, not completely automated, manpower intensive, and has the potential for data inconsistency exists. A system is proposed which suggests a means to integrate all project management activities of TRAC through the development of a sophisticated software and by utilizing the existing computing systems and network resources. The systems integration proposal is examined in detail.

Mukkamala, Ravi↗
NASA NTRS1994

A distributed computing model for telemetry data processing

We present a new approach to distributing processed telemetry data among spacecraft flight controllers within the control centers at NASA's Johnson Space Center. This approach facilitates the development of application programs which integrate spacecraft-telemetered data and ground-based synthesized data, then distributes this information to flight controllers for analysis and decision-making. The new approach combines various distributed computing models into one hybrid distributed computing model. The model employs both client-server and peer-to-peer distributed computing models cooperating to provide users with information throughout a diverse operations environment. Specifically, it provides an attractive foundation upon which we are building critical real-time monitoring and control applications, while simultaneously lending itself to peripheral applications in playback operations, mission preparations, flight controller training, and program development and verification. We have realized the hybrid distributed computing model through an information sharing protocol. We shall describe the motivations that inspired us to create this protocol, along with a brief conceptual description of the distributed computing models it employs. We describe the protocol design in more detail, discussing many of the program design considerations and techniques we have adopted. Finally, we describe how this model is especially suitable for supporting the implementation of distributed expert system applications.

Barry, Matthew R.↗