Search NASA⌕ Search

SEARCH · Search NASA

Results for “continuous simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Second-order discrete Kalman filtering equations for control-structure interaction simulations

A general form for the first-order representation of the continuous, second-order linear structural dynamics equations is introduced in order to derive a corresponding form of first-order Kalman filtering equations (KFE). Time integration of the resulting first-order KFE is carried out via a set of linear multistep integration formulas. It is shown that a judicious combined selection of computational paths and the undetermined matrices introduced in the general form of the first-order linear structural systems leads to a class of second-order discrete KFE involving only symmetric, N x N solution matrix.

Park, K. C.↗

Mechanisms of Diurnal Precipitation over the United States Great Plains: A Cloud-Resolving Model Simulation

The mechanisms of summertime diurnal precipitation in the US Great Plains were examined with the two-dimensional (2D) Goddard Cumulus Ensemble (GCE) cloud-resolving model (CRM). The model was constrained by the observed large-scale background state and surface flux derived from the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program s Intensive Observing Period (IOP) data at the Southern Great Plains (SGP). The model, when continuously-forced by realistic surface flux and large-scale advection, simulates reasonably well the temporal evolution of the observed rainfall episodes, particularly for the strongly forced precipitation events. However, the model exhibits a deficiency for the weakly forced events driven by diurnal convection. Additional tests were run with the GCE model in order to discriminate between the mechanisms that determine daytime and nighttime convection. In these tests, the model was constrained with the same repeating diurnal variation in the large-scale advection and/or surface flux. The results indicate that it is primarily the surface heat and moisture flux that is responsible for the development of deep convection in the afternoon, whereas the large-scale upward motion and associated moisture advection play an important role in preconditioning nocturnal convection. In the nighttime, high clouds are continuously built up through their interaction and feedback with long-wave radiation, eventually initiating deep convection from the boundary layer. Without these upper-level destabilization processes, the model tends to produce only daytime convection in response to boundary layer heating. This study suggests that the correct simulation of the diurnal variation in precipitation requires that the free-atmospheric destabilization mechanisms resolved in the CRM simulation must be adequately parameterized in current general circulation models (GCMs) many of which are overly sensitive to the parameterized boundary layer heating.

Lee, M.-I.↗

Modifications to Axially Symmetric Simulations Using New DSMC (2007) Algorithms

Several modifications aimed at improving physical accuracy are proposed for solving axially symmetric problems building on the DSMC (2007) algorithms introduced by Bird. Originally developed to solve nonequilibrium, rarefied flows, the DSMC method is now regularly used to solve complex problems over a wide range of Knudsen numbers. These new algorithms include features such as nearest neighbor collisions excluding the previous collision partners, separate collision and sampling cells, automatically adaptive variable time steps, a modified no-time counter procedure for collisions, and discontinuous and event-driven physical processes. Axially symmetric solutions require radial weighting for the simulated molecules since the molecules near the axis represent fewer real molecules than those farther away from the axis due to the difference in volume of the cells. In the present methodology, these radial weighting factors are continuous, linear functions that vary with the radial position of each simulated molecule. It is shown that how one defines the number of tentative collisions greatly influences the mean collision time near the axis. The method by which the grid is treated for axially symmetric problems also plays an important role near the axis, especially for scalar pressure. A new method to treat how the molecules are traced through the grid is proposed to alleviate the decrease in scalar pressure at the axis near the surface. Also, a modification to the duplication buffer is proposed to vary the duplicated molecular velocities while retaining the molecular kinetic energy and axially symmetric nature of the problem.

Liechty, Derek S.↗

Optimization of Operations Resources via Discrete Event Simulation Modeling

The resource levels required for operation and support of reusable launch vehicles are typically defined through discrete event simulation modeling. Minimizing these resources constitutes an optimization problem involving discrete variables and simulation. Conventional approaches to solve such optimization problems involving integer valued decision variables are the pattern search and statistical methods. However, in a simulation environment that is characterized by search spaces of unknown topology and stochastic measures, these optimization approaches often prove inadequate. In this paper, we have explored the applicability of genetic algorithms to the simulation domain. Genetic algorithms provide a robust search strategy that does not require continuity and differentiability of the problem domain. The genetic algorithm successfully minimized the operation and support activities for a space vehicle, through a discrete event simulation model. The practical issues associated with simulation optimization, such as stochastic variables and constraints, were also taken into consideration.

Joshi, B.↗

Stationarity of the Tropical Pacific Teleconnection to North America in CMIP5 PMIP3 Model Simulations

The temporal stationarity of the teleconnection between the tropical Pacific Ocean and North America (NA) is analyzed in atmosphere-only, and coupled last-millennium, historical, and control runs from the Coupled Model Intercomparison Project Phase 5 data archive. The teleconnection, defined as the correlation between December-January-February (DJF) tropical Pacific sea surface temperatures (SSTs) and DJF 200 mb geopotential height, is found to be nonstationary on multidecadal timescales. There are significant changes in the spatial features of the teleconnection over NA in continuous 56-year segments of the last millennium and control simulations. Analysis of atmosphere-only simulations forced with observed SSTs indicates that atmospheric noise cannot account for the temporal variability of the teleconnection, which instead is likely explained by the strength of, and multidecadal changes in, tropical Pacific Ocean variability. These results have implications for teleconnection-based analyses of model fidelity in simulating precipitation, as well as any reconstruction and forecasting efforts that assume stationarity of the observed teleconnection.

histories↗

CNS Simulation Tool Development for Increasingly Complex Airspace Operation Evaluation

As unmanned aircraft operations continue to grow and new vehicles such as air taxi, supersonic aircraft and high-altitude long endurance aircraft seek access to the airspace, it is anticipated that National Airspace System (NAS) operations will increase in density and complexity. To manage the influx, demand and safe integration of these new aircraft and missions into the NAS, a careful evaluation of existing and new operational concepts, vehicle characteristics and technology performance is required. Communications, Navigation and Surveillance (CNS) technologies operating in the NAS have evolved to meet changing needs of the Air Traffic Control System and the vehicles operating in the airspace. Today's CNS systems have been architected to deliver critical services to a carefully designed airspace configuration and to serve airborne vehicles equipped with standardized systems that enable global air navigation. The introduction of new vehicles is projected to expand NAS operations beyond today's configuration to include a new breed of aircraft operating from non-conventional aerodromes, resulting in a mix of vehicles operating in the same airspace. To enable this expansion, it is anticipated that modeling and simulation will play an important role in the evaluation of new management concept of operations.In this regard, NASA is developing simulation capabilities that will enable the evaluation of new concepts of operation and CNS technology performance in an increasingly dense, high-tempo operational environment. The NASA Glenn Research Center is working on the development of CNS simulation capabilities intended to support the integrated evaluation of operational concepts and emerging technologies. This presentation describes simulation capability development efforts that, together with other simulation tools, will enable evaluation of new concepts and technologies for the integration of new vehicles and services into the NAS. [Also discussed: NASA Shadow Mode Assessment using Realistic Technologies for the National Airspace System (SMART NAS)]

Surveillance↗

Experimental Forward Flight Rotor Performance Testing from Terrestrial to Martian Atmospheric Densities

With the recent interest in Martian exploration using Unmanned Aerial Vehicles (UAV), an experimental study was conducted to investigate rotor performance at Martian atmospheric conditions. Both simulation and testing of rotors is vital for the evaluation of performance and behavior of rotor, especially for operations at Martian atmospheric densities and pressures. Testing and measuring rotor forward flight performance at Martian atmospheric conditions is a relatively unexplored area. Therefore, an experimental study was performed in a wind tunnel to investigate helicopter forward flight performance and to demonstrate successful rotor operation at Martian atmospheric densities. This work was a continuation of the first ever wind tunnel test of a simulated rotorcraft in forward flight at Martian atmospheric densities. A test was conducted in a facility, which could be evacuated to the atmospheric pressure and density of Mars. A 40-in diameter rotor, roughly approximating the scale of the proposed Mars Helicopter design by the NASA Jet Propulsion Laboratory (JPL), was tested in forward flight at Mars atmospheric pressure at the NASA Ames Planetary Aeolian Laboratory (PAL). In this forward flight testing, the drive system of the Martian Surface Wind Tunnel (MARSWIT) was never turned on. The goal of this experiment was to collect rotor thrust, rotational speed, power, torque, and wind speed measurements. Subsequently, these results can be used for correlation with simulated cases using a mid-fidelity Computational Fluid Dynamics (CFD) simulation. Rotor thrust and power seem to decrease approximately proportional to the decrease in density. However, the Reynolds number has an effect on rotor performance that might also be contributing to the change in thrust and power. This effect plays a vital role in rotor performance at reduced pressure that cannot be neglected in the simulation. Despite the challenges involved in testing at a large difference of atmospheric densities between Earth and Mars, repeatable data is obtained in all the measurements at Martian atmospheric conditions.

Martian↗

Low-speed impact phenomena and orbital resonances in the moon- and planet-building process

A simulation of collisional and gravitational interaction in the early solar system generates planets approximately 1000 km in diameter from an initial swarm of kilometer sized planetesimals. The model treats collisions according to experimental and theoretical impact results (such as rebound, cratering, and catastrophic fragmentation) for a variety of materials whose parameters span plausible values for early solid objects. The small planets form in approximately 1000 yr, during which time most of the mass of the system continues to reside in particles near the original size. The simulation is terminated when the largest objects' random motion is of smaller dimension than their collision cross-sections. The few 1000 km planets may act as seeds for the subsequent, gradual, accretional growth into full-sized planets.

Chapman, C. R.↗

Arctic Tropospheric Ozone: Assessment of Current Knowledge and Model Performance

As the third most important greenhouse gas (GHG) after carbon dioxide (CO2) and methane (CH4), tropospheric ozone (O3) is also an air pollutant causing damage to human health and ecosystems. This study brings together recent research on observations and modeling of tropospheric O3 in the Arctic, a rapidly warming and sensitive environment. At different locations in the Arctic, the observed surface O3 seasonal cycles are quite different. Coastal Arctic locations, for example, have a minimum in the springtime due to O3 depletion events resulting from surface bromine chemistry. In contrast, other Arctic locations have a maximum in the spring. The 12 state-of-the-art models used in this study lack the surface halogen chemistry needed to simulate coastal Arctic surface O3 depletion in the springtime; however, the multi-model median (MMM) has accurate seasonal cycles at non-coastal Arctic locations. There is a large amount of variability among models, which has been previously reported, and we show that there continues to be no convergence among models or improved accuracy in simulating tropospheric O3 and its precursor species. The MMM underestimates Arctic surface O3 by 5 % to 15 % depending on the location. The vertical distribution of tropospheric O3 is studied from recent ozonesonde measurements and the models. The models are highly variable, simulating free-tropospheric O3 within a range of ±50 % depending on the model and the altitude. The MMM performs best, within ±8 % for most locations and seasons. However, nearly all models overestimate O3 near the tropopause (∼300 hPa or ∼8 km), likely due to ongoing issues with underestimating the altitude of the tropopause and excessive downward transport of stratospheric O3 at high latitudes. For example, the MMM is biased high by about 20 % at Eureka. Observed and simulated O3 precursors (CO, NOx, and reservoir PAN) are evaluated throughout the troposphere. Models underestimate wintertime CO everywhere, likely due to a combination of underestimating CO emissions and possibly overestimating OH. Throughout the vertical profile (compared to aircraft measurements), the MMM underestimates both CO and NOx but overestimates PAN. Perhaps as a result of competing deficiencies, the MMM O3 matches the observed O3 reasonably well. Our findings suggest that despite model updates over the last decade, model results are as highly variable as ever and have not increased in accuracy for representing Arctic tropospheric O3.

Arctic↗

Towards an Enhanced Droplet Activation Scheme for Multi-Moment Bulk Microphysics Schemes

Initial droplet spectra produced upon activation impact the ensuing chain of microphysical processes andtherefore play a crucial role in cloud evolution. This work re-examines dependencies of newly formed clouddroplet size distribution (CDSD) characteristics on environmental and aerosol properties via parcel model simulationsthat serve as the basis for a multi-moment bulk microphysics droplet activation scheme suitable for acloud-resolving model (CRM). It is found that applying a fixed size threshold to define activated droplets versusemploying physical considerations can lead to erroneous activation and overly broad CDSDs for high aerosolconcentration and weak updraft conditions. Aerosol distributions characterized by larger median sizes and/orincreased solubility can result in greater activated droplet numbers, whereas impacts of these parameters onCDSD spectral width depend on both aerosol number concentration and updraft velocity. An expansion of theactivation scheme to include CDSD spectral width is proposed to aid efforts to extend high-order momentprediction to cloud droplet categories in CRMs as well as better represent variability in the activation process onthe cloud scale.simulations to investigate the regime dependence of the relative dispersion(d)1 of newly activated CDSDs, where d is the ratio of dropletradius standard deviation (σ) to the mean radius (r ). C16 demonstratedthat increasing Na resulted in increasing (decreasing) d values via reducedcondensational narrowing (spectral broadening) rates within theAL (UL) regime, with d values peaking in the TR regime. Their findingssuggest a similar regime dependence for d as R09 noted for Nc and helpexplain reportedly conflicting relationships between Na and CDSDspectral characteristics (cf. Hudson and Noble, 2014; Liu et al., 2014),although the applicability of these results within bulk microphysicalschemes was not addressed.Simulating aerosol-cloud interactions with CRMs employing bulkmicrophysics requires that the scheme minimally predict two CDSDparameters, namely mass and number concentrations, and represent thedroplet activation process. Various activation schemes aim to determineNc from aerosol and environmental properties and include analyticalexpressions (e.g., Abdul-Razzak et al., 1998; Morrison et al., 2005) aswell as lookup tables (LUTs) based on detailed parcel model calculations(e.g., Saleeby and Cotton, 2004, hereafter SC04; Segal and Khain,2006; Thompson and Eidhammer, 2014). Expressions to diagnose CDSDspectral width from Nc (Grabowski, 1998; Liu et al., 2006; Morrison andGrabowski, 2007) or cloud water content (Geoffroy et al., 2010) havealso been developed, although more robust methods to obtain CDSDspectral width upon activation are presently lacking. This latter point isrelevant for triple-moment (3 M) bulk microphysics that aim to predictdistribution spectral width alongside number and mass concentrations(e.g., Loftus et al., 2014; Milbrandt and Yau, 2005).The current work extends the findings of C16 to the current LUTbasedaerosol activation scheme used in the Regional AtmosphericModeling System (RAMS) (Cotton et al., 2003; SC04; Saleeby and vanden Heever, 2013, hereafter SvdH13) and additionally examinesaerosol size and solubility impacts on newly activated CDSD properties.Because early cloud development processes such as condensationalgrowth, evaporation, and droplet self-collection depend on and impactCDSD spectral width (Hudson and Yum, 1997; Seifert and Beheng 2001;Lu and Seinfeld, 2006; Igel and van den Heever, 2017), an expansion ofthe activation LUTs to include CDSD spectral width is proposed as apreliminary step for extending 3M prediction to CDSDs in CRMs forimproved simulations of aerosol-cloud interactions.2. MethodologyThe current RAMS two-moment microphysics module determinesthe fractional number of aerosol particles that activate to cloud dropletsfrom five-dimensional LUTs based on model predicted air temperature(T), w, Na, and the geometric median radius (rg) and soluble fraction (ε)of the aerosol size distribution (SvdH13). These LUTs are created offlineusing a one-dimensional Lagrangian adiabatic parcel model (Feingoldand Heymsfield, 1992; Heymsfield and Sabin, 1989; SC04) to simulateexplicit droplet activation and initial CDSD growth for a range of ambientatmospheric conditions [T, w] and binned lognormal aerosol sizedistributions given by= ⎡⎣ ⎢− ⎤⎦ ⎥N r Nr π σr rσ( )2 lnexp[ln( / )]2(ln )aggg22 (1)where r is the dry aerosol particle bin radius and σg is the geometricstandard deviation of the distribution. As the parcel model simulationsfocus on the activation process, other processes such as coalescence,sedimentation, and mixing are not considered. Details of the parcelmodel can be found in SC04 and SvdH13, and only a brief description isprovided here. At the onset of parcel model calculations, the initiallydry aerosol particles in all bins first deliquesce and reach theirequilibrium diameters in a sub-saturated environment based on theKöhler equation for solution droplets. The parcel is then lifted at a fixedupward velocity w, and particle growth by vapor diffusion, along withconcurrent changes in the ambient environment, are iteratively computedusing the Variable-coefficient Ordinary Differential Equation(VODE) solver (Brown et al., 1989). The time resolution of these calculationsis determined within the VODE solver, and the frequency atwhich the solver is called is controlled by a longer model time stepbased on fixed upward parcel displacement increments (Δz) at thespecified w (Δt=Δz/w). Model calculations proceed until the parcelreaches a height 50m beyond the level of maximum saturation ratio(Smax) or total parcel displacement exceeds 2 km. Upon model termination,Smax and the fractional number of aerosols (factv) resulting innewly formed cloud droplets, defined as particles having diameters of atleast 2 μm, are cataloged in the LUTs according to the specified T, w, Na,rg, and ε parameter values.A critical point regarding the creation of these LUTs is the use of afixed minimum diameter (Dmin) to define cloud droplets in the parcelmodel, which can produce erroneous CDSD characteristics, particularlywithin the UL regime. For aerosol distributions with large rg valuesunder low SS conditions, for example, deliquesced aerosols within thelarge tail of the distribution can exceed 2 μm in diameter yet remainunactivated as ‘haze’ particles (Levin and Cotton, 2009; McFigganset al., 2006). For this study, aerosol particles activate to cloud dropletsbased on the critical diameter Dcrit as a function of parcel supersaturationratio (Sr) as in R09:D = σ MS RTρ83 ln( ) critsol wr w (2)where σsol is the surface tension of a solution droplet, Mw and ρw are themolar mass and density of liquid water, respectively, and R is theuniversal gas constant. Additionally, at relatively large w values withinthe AL regime, Nc stabilizes shortly after reaching supersaturation.However, parcel ascent and condensational growth continue beyondthe level of Smax, potentially causing additional narrowing of the CDSD.In the current work, model calculations terminate upon reaching Smaxas changes in Nc are negligible with continued ascent (Peng et al., 2007;R09).Parcel model simulations are performed to examine the sensitivitiesof CDSD characteristics to w, Na, rg, and ε, with the ranges for theseparameters listed in Table 1. Aerosols are assumed to be a mix of solubleand insoluble material of equal density, specified by ε, where fullysoluble aerosols correspond to ammonium sulfate with hygroscopicityparameter κ=0.61 (Petters and Kreidenweis, 2007). FollowingSvdH13, aerosol geometric standard deviation is fixed at σg=1.8, andaerosol distributions (Eq. 1) are partitioned into 100 logarithmicallyspacedbins spanning a size range specific to each rg value. For all simulations,Δz=1 m, and initial values of relative humidity, air temperatureand pressure are set to RH=0.99, T=10 °C and p=900 hPa,respectively.

Loftus, Adrian M.↗

Estimating Resolution Lengths of Hybrid Turbulence Models

A two-stage procedure has been devised for estimating the spatial resolution achievable in the simulation of a given flow on a given computational grid by a computational fluid dynamics (CFD) code that incorporates a hybrid model of turbulence. The hybrid models to which this procedure is especially relevant are those of the Reynolds-averaged Navier-Stokes (RANS) and the partial-averaged Navier-Stokes (PANS) approaches. This procedure represents the first step toward adding variable-resolution turbulence-modeling capabilities to CFD codes as part of a continuing effort to increase the accuracy and robustness of CFD simulations of unsteady flows. Some background information is prerequisite to a meaningful summary of the procedure. Among experts in CFD, it is well known that combination of the Reynolds-averaged Navier-Stokes (RANS) approach and eddy-viscosity turbulence models offers limited capability for simulating unsteady and complex flows. The RANS approach includes an assumption that most of the energy in a given flow is modeled through turbulence-transport equations and is resolved in a computational grid used to simulate the flow. RANS also overpredicts eddy viscosity, thereby yielding excessive damping of unsteady motion. The eddy viscosity attains an unphysically large value because of unresolved scales, and suppresses most temporal and spatial fluctuations in the resolved flow field. One approach used to overcome this deficiency is to provide a mechanism for the RANS equations to resolve motion only on the largest scales and to use a hybrid model to represent effects at smaller scales. The RANS approach involves the use of a standard two-equation turbulence model in which the effect of turbulence is summarized by a viscosity that is a function of (1) the time-averaged kinetic- energy density (k) associated with the local fluctuating (turbulent) component of flow and (2) the time-averaged rate of dissipation of the turbulent-kinetic- energy density ( ). In PANS, which was developed to overcome the grid dependency associated with other hybrid turbulence models (including that of RANS), the standard two-equation turbulence model is replaced by another two-equation model in which one solves for the previously unresolved k and , which are now allowed to vary in space and time.

Abdol-Hamid, Khaled S.↗

VULCAN-CFD User Manual: Ver. 7.2.0

VULCAN-CFD offers a comprehensive set of capabilities to enable the simulation of continuum flowfields from subsonic to hypersonic conditions. The governing equations that are employed include allowances for both chemical and thermal nonequilibrium processes, coupled with a wide variety of turbulence models for both Reynolds-averaged and large eddy simulations. The software package can simulate two-dimensional, axisymmetric, or three-dimensional problems on structured multiblock meshes or fully unstructured meshes. A parabolic (i.e., space-marching) treatment can also be used for any subset of a structured mesh that can accommodate this solution strategy. The flow solver provides a significant level of geometric flexibility for structured grid simulations by allowing for arbitrary face-to-face C(0) continuous and non-C(0) continuous block interface connectivities. The unstructured grid paradigm allows for mixed element unstructured meshes that contain any combination of tetrahedral, prismatic, pyramidal, and hexahedral cell elements. The flow solver is also fully parallelized using MPI (Message Passing Interface) libraries in a data-parallel fashion, allowing for efficient simulations on modern High Performance Computing (HPC) systems. This document provides information related to the installation and execution of the VULCAN-CFD software package. A detailed description of the physical and numerical models available in the software are provided in the VULCAN-CFD Theory Manual.

VULCAN-CFD User Manual↗

Sensitometric data for earth resources film

Sensitometry is applied to all photographic earth resources mission film processing. The exposure is made using an intensity modulated sensitometer with a 2850 K source filtered to produce a 5500 K spectral distribution. In addition, any filters used on the sensor are included in the sensitometer filter pack in order to accurately simulate the exposure conditions. The modulator consists of a continuous carbon wedge and a 20-step carbon step tablet.

Perry, L.↗

Program definition and preliminary results of a long-term evaluation program of advanced composites for supersonic cruise aircraft applications

Advanced composites will play a key role in the development of the technology required for the design and fabrication of future supersonic vehicles. A program is in progress to determine the time-temperature-stress capabilities of several high-temperature composite materials. Tests included in this study are thermal aging, ambient aging, fatigue, creep, fracture, tensile, and real-time flight-simulation exposure. The program has two parts. The first includes all the material-property determinations and aging and simulation exposures up through 10,000 h. The second continues these tests up to 50,000 cumulative h. The program is currently in the midst of the 10,000-h phase. Some of the results obtained to date and the status of the various tests are discussed.

Kerr, J. R.↗

Life sciences experiments mission development test program

The development, goals, and experimental programs of the three Spacelab Mission Developmental tests are described. The tests were structured as a total simulation of a dedicated mission commencing with experiment solicitation; continuing with experiment development, integration, and mission planning; and ending with the actual conduct of a seven-day 24-hour per day mission in mockup facilities. Topics such as test payload management; payload integration, training, and testing; test operations and program facilities are discussed.

Bush, W. H., Jr.↗

Time-temperature-stress capabilities of composite materials for advanced supersonic technology application, phase 1

Implementation of metal and resin matrix composites into supersonic vehicle usage is contingent upon accelerating the demonstration of service capacity and design technology. Because of the added material complexity and lack of extensive service data, laboratory replication of the flight service will provide the most rapid method of documenting the airworthiness of advanced composite systems. A program in progress to determine the time temperature stress capabilities of several high temperature composite materials includes thermal aging, environmental aging, fatigue, creep, fracture, and tensile tests as well as real time flight simulation exposure. The program has two parts. The first includes all the material property determinations and aging and simulation exposures up through 10,000 hours. The second continues these tests up to 50,000 cumulative hours. Results are presented of the 10,000 hour phase, which has now been completed.

Kerr, J. R.↗

Flight training for Space Shuttle missions

The training performed for flights of the Space Shuttle is intensive and extremely complicated. The training is totally dependent on computer generated training situations in both cockpit simulations and in integrated simulations between the simulators and the Mission Control Center (MCC). These simulations form a complex set of dress rehearsals of the actual spaceflight allowing the participants to address problems in a real world situation and utilize problem solving rationale just as they will be called upon to do during the real flight. The benefits of this type of training have been demonstrated during the flights of the Shuttle as individual flight controllers and whole teams have been tested by various untoward situations. This system of integrated simulation and training, more complex than ever, will be continued in use in the future using even more intricate man-machine interactions required to initialize, control, and operate it.

Hughes, F. E.↗

Solar transition region and coronal response to heating rate perturbations

Observations of Doppler shifts in UV emission lines formed in the solar transition region show continual plasma downflows and impulsive plasma upflows. Using numerical simulations, the authors examine the conjecture that areas of downflowing plasma are the base regions of coronal loops in which the heating is gradually decreasing and that areas of upflowing plasma are the base regions of coronal loops in which the heating rate is gradually increasing. Beginning with a coronal loop in equilibrium, the heating rate is reduced on time scales of 100, 1000, and 2000 s to 10 percent and 1 percent of the initial value, and the loop is allowed to evolve to a new equilibrium. The heating rate for the cooled models is then increased back to the initial value on the same time scales. While significant mass motions do develop in the simulations, both the emission measure and the velocity at 100,000 K do not show the characteristics present in UV observations.

Mariska, John T.↗