Search NASA⌕ Search

SEARCH · Search NASA

Results for “data channels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Pressure Drop Across Woven Screens Under Uniform and Nonuniform Flow Conditions

Tests were conducted to determine the experimental pressure drop and velocity data for water flowing through woven screens. The types of materials used are dutch twill and square weave fabrics. Pressure drop measures were made at four locations in a rectangular channel. The data are presented as change in pressure compared with the average entry velocity and the numerical relationship is determined by dividing the volumetric flow rate by the screen area open to flow. The equations of continuity and momentum are presented. A computer program listing an extension of a theoretical model and data from that computer program are included.

Ludewig, M.↗

Preliminary analysis of ocean color scanner data from Superflux III

The ocean color scanner collected data Superflux III Experiment Single channel gray scale data products generated 5 minutes after the scanner data were collected showed details of the Chesapeake Plume structure, suggesting that this quick-look capability could have potential use to experimenters in real time. The Chesapeake Bay Plume extended offshore between 5 and 7 nautical miles on two occasions. The scanner data also show many other water features within the lower bay itself.

Ohlhorst, C. W.↗

JPL airborne instruments activities

Two instruments intended for flight aboard aircraft for research in advanced remote sensing of the earth are under development: the airborne imaging spectrometer (AIS) and the airborne visible-infrared imaging spectrometer (AVIRIS). The AIS utilizes a 32 x 32 element HgCdTe CCD array to gather 10nm spectral data, initially in the 1.2 to 2.4 micron range, with 32 pixels of cross-track spatial data. The instrument acquires 128 channels of spectral data by using a grating spectrometer whose grating is stepped through four positions during a fraction of an IFOV time on the ground. With an IFOV of 2 mrad, the GIFOV at the design altitude of 3 km is 6m. The instrument has several on-board processing capabilities including ax+b corrections for detector calibration, cross-track and down-track pixel summing, spectral band summing, and variable integration time to allow flight at various altitudes and velocities. The AVIRIS uses a proven scanning mechanism to acquire the spatial data in a whisk broom mode. The spectral coverage is from 0.35 to 2.5 microns at bandwidths ranging from 10 to 20 nm.

Vane, G.↗

Remote sensing of the atmosphere by multi-channel radiometers

To characterize Earth/space communication links, the Jet Propulsion Laboratory's (JPL's) Radiowave Propagation Program supports a number of propagation studies. Low-availability satellite links and their propagation vagaries at Ka and millimeter-wave bands constitute a major effort within this program. Since 1987, this program has funded the Wave Propagation Laboratory (WPL) of the National Oceanic and Atmospheric Administration (NOAA) to conduct multiple-frequency radiometric observations of the atmosphere. Measurements of atmospheric emission and attenuation at 20, 31, and 90 GHz at different locations are presented. Single-station and joint-station statistics are derived. A linear regression scheme for the prediction of fade statistics in one channel using fade data from the other two channels is presented.

Davarian, Faramaz↗

A Novel Data System for Verification of Internal Parameters of Motor Design

Three major obstacles have limited the amount of information that can be obtained from inside an operating solid rocket motor. The first is a safety issue due to the presence of live propellant interacting with classical, electrical instrumentation. The second is a pressure vessel feed through risk arising from bringing a large number of wires through the rocket motor wall safely. The third is an attachment/protection issue associated with connecting gages to live propellant. Thiokol has developed a highly miniaturized, networked, electrically isolated data system that has safely delivered information from classical, electrical instrumentation (even on the burning propellant surface) to the outside world. This system requires only four wires to deliver 80 channels of data at 2300 samples/second/channel. The feed through leak path risk is massively reduced from the current situation where each gage requires at least three pressure vessel wire penetrations. The external electrical isolation of the system is better than that of the propellant itself. This paper describes the new system.

Smith, Doug↗

Radiotelemetry

Radiotelemetry, by definition, is the science and technology of automatic measurement and transmission of data by radio from remote sources, as from space vehicles, to receiving stations for recording and analyis. It involves the preparatio of data generated at remote sources, the transmission of data through radio channels, and the processing of data at the recieving stations. Behind these three tasks, how to convey the information in a reliable and timely manner through a communication link is the most fundamental problem to be addressed in this field.

Radiotelemetry↗

Adjoint-Based Diagnostics in Atmospheric Data Assimilation

With the adjoint of a data assimilation system, the impact of any or all assimilated observations on measures of forecast or analysis skill can be estimated accurately and efficiently. The approach is especially well-suited for assessing the impact of hyper-spectral satellite instruments on numerical weather forecasts because it easily allows aggregation of results in terms of individual data types, channels or locations, all computed simultaneously based on a single pass of the Adjoint- system. This talk 'provides a general overview of the use of Adjoint-based diagnostic tools in data assimilation. We will focus on the theoretical basis and practical implementation of these tools, as well as their application to specific problems. Adjoint-based Impact calculations will be compared with results from standard observing system experiments (OSEs) and their application to related problems, such as the calibration of Observing System Simulation Experiments (OSSEs) will be discussed.

Gelaro, Ronald↗

Randomizer for High Data Rates

NASA as well as a number of other space agencies now recognize that the current recommended CCSDS randomizer used for telemetry (TM) is too short. When multiple applications of the PN8 Maximal Length Sequence (MLS) are required in order to fully cover a channel access data unit (CADU), spectral problems in the form of elevated spurious discretes (spurs) appear. Originally the randomizer was called a bit transition generator (BTG) precisely because it was thought that its primary value was to insure sufficient bit transitions to allow the bit/symbol synchronizer to lock and remain locked. We, NASA, have shown that the old BTG concept is a limited view of the real value of the randomizer sequence and that the randomizer also aids in signal acquisition as well as minimizing the potential for false decoder lock. Under the guidelines we considered here there are multiple maximal length sequences under GF(2) which appear attractive in this application. Although there may be mitigating reasons why another MLS sequence could be selected, one sequence in particular possesses a combination of desired properties which offsets it from the others.

randomizer↗

Randomizer for High Data Rates

NASA as well as a number of other space agencies now recognize that the current recommended CCSDS randomizer used for telemetry (TM) is too short. When multiple applications of the PN8 Maximal Length Sequence (MLS) are required in order to fully cover a channel access data unit (CADU), spectral problems in the form of elevated spurious discretes (spurs) appear. Originally the randomizer was called a bit transition generator (BTG) precisely because it was thought that its primary value was to insure sufficient bit transitions to allow the bit/symbol synchronizer to lock and remain locked. We, NASA, have shown that the old BTG concept is a limited view of the real value of the randomizer sequence and that the randomizer also aids in signal acquisition as well as minimizing the potential for false decoder lock. Under the guidelines we considered here there are multiple maximal length sequences under GF(2) which appear attractive in this application. Although there may be mitigating reasons why another MLS sequence could be selected, one sequence in particular possesses a combination of desired properties which offsets it from the others.

primitive polynomials↗

Interhemispheric comparison of atmospheric circulation features as evaluated from Nimbus satellite data. A comparison of the structure and flow characteristics of the upper troposphere and stratosphere of the Northern and Southern Hemispheres

The general circulations of the Northern and Southern Hemispheres are compared with regard to the upper troposphere and stratosphere, using atmospheric structure obtained from multi-channel radiance data from the satellite infrared spectrometer instrument aboard the Nimbus 3 spacecraft. The inter-hemispheric comparisons are based on two months of data (one summer month and one winter month) in each hemisphere. Topics studied include: (1) mean meridional circulation in the Southern Hemisphere stratosphere; (2) magnitude and distribution of tropospheric eddy heat flux; (3) relative importance of standing and transient eddies in the two hemispheres; (4) magnitudes of energy cycle components; and (5) the relation of vortex structure to the breakdown climatology of the Antarctic stratospheric polar vortex.

Reiter, E. R.↗

Clear-Sky Narrowband Albedo Variations Derived from VIRS and MODIS Data

A critical parameter for detecting clouds and aerosols and for retrieving their microphysical properties is the clear-sky radiance. The Clouds and the Earth's Radiant Energy System (CERES) Project uses the visible (VIS; 0.63 m) and near-infrared (NIR; 1.6 or 2.13 m) channels available on same satellites as the CERES scanners. Another channel often used for cloud and aerosol, and vegetation cover retrievals is the vegetation (VEG; 0.86- m) channel that has been available on the Advanced Very High Resolution Radiometer (AVHRR) for many years. Generally, clear-sky albedo for a given surface type is determined for conditions when the vegetation is either thriving or dormant and free of snow. Snow albedo is typically estimated without considering the underlying surface type. The albedo for a surface blanketed by snow, however, should vary with surface type because the vegetation often emerges from the snow to varying degrees depending on the vertical dimensions of the vegetation. For example, a snowcovered prairie will probably be brighter than a snowcovered forest because the snow typically falls off the trees exposing the darker surfaces while the snow on a grassland at the same temperatures will likely be continuous and, therefore, more reflective. Accounting for the vegetation-induced differences should improve the capabilities for distinguishing snow and clouds over different surface types and facilitate improvements in the accuracy of radiative transfer calculations between the snow-covered surface and the atmosphere, eventually leading to improvements in models of the energy budgets over land. This paper presents a more complete analysis of the CERES spectral clear-sky reflectances to determine the variations in clear-sky top-of-atmosphere (TOA) albedos for both snow-free and snow-covered surfaces for four spectral channels using data from Terra and Aqua.. The results should be valuable for improved cloud retrievals and for modeling radiation fields.

Sun-Mack, Sunny↗

Pre-emphasis determination for an S-band constant bandwidth FM/FM station

Pre-emphasis schedules are given for 11 constant-bandwidth FM subcarriers modulating an S band transmitter at three receiver signal to noise ratios (i.e., 9, 15, and 25 dB). The criterion for establishing these pre-emphasis curves is the achievement, at various receiver intermediate frequency signal to noise ratios, of equal receiver output signal to noise ratios for all channels. It is realized that these curves may not be the optimum pre-emphasis curves based on overall efficiency or maximum utilization of the allotted spectrum, but they are near-optimum for data with channels which require equal output signal to noise ratios, such as spectral densities. The empirically derived results are compared with a simplified, analytically derived schedule and the primary differences are explained. The S band pre-emphasis schedule differs from the lower frequency VHF case. Since most proportional bandwidth and constant bandwidth systems use ground based recorders and some use flight recorders (as the Saturn systems did on VHF proportional bandwidth telemetry), the effects of these recorders are discussed and a modified pre-emphasis schedule is presented showing the results of this study phase.

Wallace, G. R.↗

Remote sensing of surface mines - A comparative study of sensor systems

The application of remote sensing to the inventory of coal surface mines and to the monitoring of mine reclamation in the eastern United States was investigated. Data were acquired during spring and autumn by several sensor systems over study areas located within the bituminous coal fields of Pennsylvania. Data sources were the Landsat MSS, an airborne multispectral scanner (Daedalus DS-1260), the airborne Thematic Mapper Simulator, and high-altitude color and color infrared aerial photography. A comparison of the data sets was conducted by a quantitative assessment of area measurement accuracy. Landsat data were found most suitable for a synoptic inventory of mines on a regional basis. High-altitude aerial photography was considered the best source of the detailed information required for reclamation monitoring. Nine channels of data from the airborne scanner were evaluated to select the most useful spectral bands for discriminating among the land cover types associated with surface mines. Four bands were selected in the following order by a stepwise linear discriminant procedure: 0.60-0.65 micron, 0.92-1.10 microns, 0.80-0.89 micron, and 8-14 microns. The data corresponding to these four bands were used for the thematic mapping of land cover.

Irons, J. R.↗

Relationship between ozone and temperature trends in the lower stratosphere: Latitude and seasonal dependences

A one-dimensional radiative transfer model with fixed dynamical heating is used to calculate the approximate latitude and seasonal dependences of lower stratospheric temperature changes associated with observed ozone trends. The spatial and temporal distribution of ozone profile trends in the lower stratosphere is estimated from a combination of Nimbus 7 Solar Backscattered Ultraviolet (SBUV) global measurements of the ozone column below 32 mbar for the period 1979-1990 and balloon ozonesonde profile trends at northern middle latitudes. The calculated temperature trends near 100 mbar compare favorably with those recently derived by Randel and Cobb (1994) using data from Channel 4 of the Microwave Sounding Unit (MSU) on the NOAA operational satellites, although a number of quantitative differences are found. An independent analysis reported here of 100 mbar temperatures derived from northern hemisphere radiosonde data at the Free University of Berlin (FUB) supports the validity of the satellite-derived lower stratospheric temperature trends. These results are therefore generally consistent with the hypothesis that observed lower stratospheric cooling trends are predominantly determined by reductions in radiative heating associated with stratospheric ozone depletion.

Mccormack, John P.↗

Root Raised Cosine (RRC) Filters and Pulse Shaping in Communication Systems

This presentation briefly discusses application of the Root Raised Cosine (RRC) pulse shaping in the space telecommunication. Use of the RRC filtering (i.e., pulse shaping) is adopted in commercial communications, such as cellular technology, and used extensively. However, its use in space communication is still relatively new. This will possibly change as the crowding of the frequency spectrum used in the space communication becomes a problem. The two conflicting requirements in telecommunication are the demand for high data rates per channel (or user) and need for more channels, i.e., more users. Theoretically as the channel bandwidth is increased to provide higher data rates the number of channels allocated in a fixed spectrum must be reduced. Tackling these two conflicting requirements at the same time led to the development of the RRC filters. More channels with wider bandwidth might be tightly packed in the frequency spectrum achieving the desired goals. A link model with the RRC filters has been developed and simulated. Using 90% power Bandwidth (BW) measurement definition showed that the RRC filtering might improve spectrum efficiency by more than 75%. Furthermore using the matching RRC filters both in the transmitter and receiver provides the improved Bit Error Rate (BER) performance. In this presentation the theory of three related concepts, namely pulse shaping, Inter Symbol Interference (ISI), and Bandwidth (BW) will be touched upon. Additionally the concept of the RRC filtering and some facts about the RRC filters will be presented

Cubukcu, Erkin↗

The 'Brick Wall' radio loss approximation and the performance of strong channel codes for deep space applications at high data rates

In order to evaluate performance of strong channel codes in presence of imperfect carrier phase tracking for residual carrier BPSK modulation in this paper an approximate 'brick wall' model is developed which is independent of the channel code type for high data rates. It is shown that this approximation is reasonably accurate (less than 0.7dB for low FERs for (1784,1/6) code and less than 0.35dB for low FERs for (5920,1/6) code). Based on the approximation's accuracy, it is concluded that the effects of imperfect carrier tracking are more or less independent of the channel code type for strong channel codes. Therefore, the advantage that one strong channel code has over another with perfect carrier tracking translates to nearly the same advantage under imperfect carrier tracking conditions. This will allow the link designers to incorporate projected channel code performance of strong channel codes into their design tables without worrying about their behavior in the face of imperfect carrier phase tracking.

turbo codes↗

A study of gamma ray burst continuum properties presnting evidence for two spectral states in bursts

Evidence is presented for the existence of two spectral states contributing simultaneously to the total spectrum observed in many gamma-ray bursts (GRB's). An ensemble of 120 GRB's measured by BATSE were studied, using 4 channel spectral data, to determine in which bursts the spectral states can be most effectively resolved. The technique of summing the low intensity spectra together to get an average spectrum allows for precise characterization of the average low intensity spectral behavior. The 4 and 16 channel spectra obtained by the BATSE Large Area Detectors (LAD's) are analyzed using a model-independent spectral inversion technique. The results of these analyses applied to an individual burst are discussed in detail.

Pendleton, Geoffrey N.↗

On-the-shaft data systems for rotating engine components

Two rotating data systems for engine component testing which demonstrate the techniques of on-the-shaft microelectronic signal conditioning and rotary transformer power- and data-transfer are described. (1) A digital data system provides 69 channels of 1100 C maximum thermocouple data with less than 0.5 percent error from a turbine test rig rotating at speeds up to 9000 rpm. (2) An analog data system amplifies and transfers 72 channels of dynamic strain data with less than 5 percent error from a compressor rig at speeds above 14,000 rpm.

Lesco, D. J.↗