Search NASA⌕ Search

SEARCH · Search NASA

Results for “data reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Methods for obtaining and reducing experimental droplet impingement data on arbitrary bodies

Experimental water droplet impingement data are used to validate particle trajectory computer codes used in the analysis and certification of aircraft de-icing/anti-icing systems. Water droplet impingement characteristics of aerodynamic surfaces are usually obtained from wind-tunnel dye tracer experiments. This paper presents a dye tracer method for measuring water droplet impingement characteristics on arbitrary geometries and a new data reduction method, based on laser reflectance measurements, for extracting impingement data. Extraction of impingement data has been a very time-consuming process in the past. The new data reduction method developed is at least an order of magnitude more efficient than the method previously used. The accuracy of the method is discussed and results obtained are presented.

Papadakis, Michael↗

Rapid, Repeat-sample Monitoring of Crustal Deformations and Environmental Phenomena with the Uninhabited Aerial Vehicle Synthetic Aperture Radar

The Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) is a precision repeat-pass Interferometric Synthetic Aperture Radar (InSAR) mission being developed by the Jet Propulsion Laboratory and the Dryden Flight Research Center in support of NASA s Science Mission Directorate. UAVSAR's unique ability to fly a repeatable flight path, along with an electronically steerable array, allows interferometric data to be obtained with accuracies measured in millimeters. Deploying the radar on an airborne platform will also allow for radar images to be collected and compared with images from the same area taken hours or even years later - providing for long-term trending and near real-time notification of changes and deformations. UAVSAR s data processing algorithms will provide for near-real time data reduction providing disaster planning and response teams with highly accurate data to aid in the prediction of, and response to, natural phenomena. UAVSAR data can be applied to increasing our understanding of the processes behind solid earth, cryosphere, carbon cycle and other areas of interest in earth science. Technologies developed for UAVSAR may also be applicable to a future earth-orbiting InSAR mission and possibly for missions to the Moon or Mars. The UAVSAR is expected to fly on a Gulfstream III aircraft this winter, followed by a flight test program lasting until the second half of 2007. Following radar calibration and data reduction activities, the platform will be ready for science users in the summer of 2008.

Smith, Robert C.↗

Thermal mapping of the lunar surface

A program of lunar infrared radiometry which uses large area scanning is described, and procedures for atmospheric attenuation correction and data reduction to temperature by relative radiometry are outlined. Flow charts of the computer data reduction program are shown which contain the astrometric analysis from ephemeral data. The scan data, taken on 10 evenings in 1971 and 1972 in the 10 to 12 micron window, are presented as isothermal contour maps of the lunar disc. More than 160 areas of anomalous thermal emission were found in the lunar darkside data. Eclipse cooling curves, measured in the same wavelength band for 7 lunar regions during the eclipse of February 10, 1971, are also presented. Errors of the scan and eclipse data were calculated from accuracy estimates of the parameters.

Raine, W. L.↗

Data traffic reduction schemes for sparse Cholesky factorizations

Load distribution schemes are presented which minimize the total data traffic in the Cholesky factorization of dense and sparse, symmetric, positive definite matrices on multiprocessor systems with local and shared memory. The total data traffic in factoring an n x n sparse, symmetric, positive definite matrix representing an n-vertex regular 2-D grid graph using n (sup alpha), alpha is equal to or less than 1, processors are shown to be O(n(sup 1 + alpha/2)). It is O(n(sup 3/2)), when n (sup alpha), alpha is equal to or greater than 1, processors are used. Under the conditions of uniform load distribution, these results are shown to be asymptotically optimal. The schemes allow efficient use of up to O(n) processors before the total data traffic reaches the maximum value of O(n(sup 3/2)). The partitioning employed within the scheme, allows a better utilization of the data accessed from shared memory than those of previously published methods.

Naik, Vijay K.↗

Investigation of Structure-Property Relationships in Systematic Series of Novel Polymers

The results are discussed of the on-line interface of the Torsional Braid Analysis experiment to an Hierarchical Computer System for data acquisition, data reduction and control of experimental variables. Some experimental results are demonstrated and the data reduction procedures are outlined. Several modes of presentation of the final computer-reduced data are discussed in an attempt to elucidate possible interrelations between the thermal variation of the rigidity and loss parameters.

Gillham, J. K.↗

PESSTO: survey description and products from the first data release by the Public ESO Spectroscopic Survey of Transient Objects

Context. The Public European Southern Observatory Spectroscopic Survey of Transient Objects (PESSTO) began as a public spectroscopic survey in April 2012. PESSTO classifies transients from publicly available sources and wide-field surveys, and selects science targets for detailed spectroscopic and photometric follow-up. PESSTO runs for nine months of the year, January - April and August - December inclusive, and typically has allocations of 10 nights per month. Aims. We describe the data reduction strategy and data products that are publicly available through the ESO archive as the Spectroscopic Survey data release 1 (SSDR1). Methods. PESSTO uses the New Technology Telescope with the instruments EFOSC2 and SOFI to provide optical and NIR spectroscopy and imaging. We target supernovae and optical transients brighter than 20.5m for classification. Science targets are selected for follow-up based on the PESSTO science goal of extending knowledge of the extremes of the supernova population. We use standard EFOSC2 set-ups providing spectra with resolutions of 13-18 Å between 3345-9995 Å. A subset of the brighter science targets are selected for SOFI spectroscopy with the blue and red grisms (0.935-2.53 μm and resolutions 23-33 Å) and imaging with broadband JHKs filters. Results. This first data release (SSDR1) contains flux calibrated spectra from the first year (April 2012-2013). A total of 221 confirmed supernovae were classified, and we released calibrated optical spectra and classifications publicly within 24 h of the data being taken (via WISeREP). The data in SSDR1 replace those released spectra. They have more reliable and quantifiable flux calibrations, correction for telluric absorption, and are made available in standard ESO Phase 3 formats. We estimate the absolute accuracy of the flux calibrations for EFOSC2 across the whole survey in SSDR1 to be typically ~15%, although a number of spectra will have less reliable absolute flux calibration because of weather and slit losses. Acquisition images for each spectrum are available which, in principle, can allow the user to refine the absolute flux calibration. The standard NIR reduction process does not produce high accuracy absolute spectrophotometry but synthetic photometry with accompanying JHKs imaging can improve this. Whenever possible, reduced SOFI images are provided to allow this. Conclusions. Future data releases will focus on improving the automated flux calibration of the data products. The rapid turnaround between discovery and classification and access to reliable pipeline processed data products has allowed early science papers in the first few months of the survey.

79 ASTRONOMY AND ASTROPHYSICS↗

Classical and quantum compression for edge computing: the ubiquitous data dimensionality reduction

Edge computing aims to address the challenges associated with communicating and transferring large amounts of data generated remotely to a data center in a timely and efficient manner. A central pillar of edge computing is local (i.e., at- or near-source) data processing capability so that data transfer to a data center for processing can be minimized. Data compression at the edge is therefore a natural component of edge workflows. Here we present a survey of data compression algorithms with a focus on edge computing. Not all compression algorithms can accommodate the data type heterogeneity, tight processing and communication time constraints, or energy efficiency requirement characteristics of edge computing. We discuss specific examples of compression algorithms that are being explored in the context of edge computing. We end our review with a brief survey of emerging quantum compression techniques that are of importance in quantum information processing, including the proposed concept of quantum edge computing.

97 MATHEMATICS AND COMPUTING↗

Replication Data for: Reduction of Oxidized Pd/Ag(111) Surfaces by H2: Sensitivity to PdO Island Size and Dispersion

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

D-region blunt probe data analysis using hybrid computer techniques

The feasibility of performing data reduction techniques with a hybrid computer was studied. The data was obtained from the flight of a parachute born probe through the D-region of the ionosphere. A presentation of the theory of blunt probe operation is included with emphasis on the equations necessary to perform the analysis. This is followed by a discussion of computer program development. Included in this discussion is a comparison of computer and hand reduction results for the blunt probe launched on 31 January 1972. The comparison showed that it was both feasible and desirable to use the computer for data reduction. The results of computer data reduction performed on flight data acquired from five blunt probes are also presented.

Burkhard, W. J.↗

Quality-Aware Data Management for Large Scale Scientific Applications

Increasingly larger scale simulations are generating an unprecedented amount of output data, causing researchers to explore new `data staging' methods that buffer, use, and/or reduce such data online rather than simply pushing it to disk. Leveraging the capabilities of data staging, this study explores the potential for data reduction via online data compression, first using general compression techniques and then proposing use-specific methods that permit users to define simple data queries that cause only the data identified by those queries to be emitted. Using online methods for code generation and deployment, with such dynamic data queries, end users can precisely identify the quality of information (QoI) of their output data, by explicitly determining what data may be lost vs. retained, in contrast to general-purpose lossy compression methods that do not provide such levels of control. The paper also describes the key elements of a quality-aware data management system (QADMS) for high-end machines enabled by this approach. Initial experimental results demonstrate that QADMS can effectively reduce data movement cost and improve the QoS while meeting the QoI constraint stated by users.

Computer Science↗

The VLT LEGA-C spectroscopic survey: The physics of galaxies at a lookback time of 7 Gyr

The Large Early Galaxy Census (LEGA-C) is a Public Spectroscopic Survey of ∼3200 K-band selected galaxies at redshifts z = 0.6 − 1.0 with stellar masses M{sub ∗}>10{sup 10} M{sub ⊙}, conducted with VIMOS on ESO’s Very Large Telescope. The survey is embedded in the COSMOS field (R.A. = 10h00; decl. = +2 deg). The 20 hr long integrations produce high-signal-to-noise ratio continuum spectra that reveal ages, metallicities and velocity dispersions of the stellar populations. LEGA-C’s unique combination of sample size and depth will enable us for the first time to map the stellar content at large lookback time, across galaxies of different types and star formation activity. Observations started in 2014 December and are planned to be completed by mid 2018, with early data releases of the spectra and value-added products. In this paper we present the science case, the observing strategy, an overview of the data reduction process and data products, and a first look at the relationship between galaxy structure and spectral properties, as it existed 7 Gyr ago.

79 ASTRONOMY AND ASTROPHYSICS↗

Data Release 1 of the Dark Energy Spectroscopic Instrument

In 2021 May the Dark Energy Spectroscopic Instrument (DESI) collaboration began a 5 yr spectroscopic redshift survey to produce a detailed map of the evolving three-dimensional structure of the Universe between z = 0 and z ≈ 4. DESI’s principal scientific objectives are to place precise constraints on the equation of state of dark energy, the gravitationally driven growth of large-scale structure, and the sum of the neutrino masses, and to explore the observational signatures of primordial inflation. We present DESI DR1, which consists of all data acquired during the first 13 months of the DESI main survey, as well as a uniform reprocessing of the DESI Survey Validation data, which were previously made public in the DESI Early Data Release. The DR1 main survey includes high-confidence redshifts for 18.7M objects, of which 13.1M are spectroscopically classified as galaxies, 1.6M as quasars, and 4M as stars, making DR1 the largest sample of extragalactic redshifts ever assembled. We summarize the DR1 observations, the spectroscopic data-reduction pipeline and data products, large-scale structure catalogs, value-added catalogs, and describe how to access and interact with the data. In addition to fulfilling its core cosmological objectives with unprecedented precision, we expect DR1 to enable a wide range of transformational astrophysical studies and discoveries.

79 ASTRONOMY AND ASTROPHYSICS↗

Mechanical properties of ion-beam-textured surgical implant alloys

An electron-bombardment Hg ion thruster was used as an ion source to texture surfaces of materials used to make orthopedic and/or dental prostheses or implants. The materials textured include 316 stainless steel, titanium-6% aluminum, 4% vanadium, and cobalt-20% chromium, 15% tungsten. To determine the effect of ion texturing on the ultimate strength and yield strength, stainless steel and Co-Cr-W alloy samples were tensile tested to failure. Three types of samples of both materials were tested. One type was ion-textured (the process also heats each sample to 300 C), another type was simply heated to 300 C in an oven, and the third type was untreated. Stress-strain diagrams, 0.2% offset yield strength data, total elongation data, and area reduction data are presented. Fatigue specimens of ion textured and untextured 316 stainless steel and Ti-6% Al-4% V were tested. Included as an ion textured sample is a Ti-6% Al-4% V sample which was ion machined by means of Ni screen mask so as to produce an array of 140 mu m x 140 mu m x 60 mu m deep pits. Scanning electron microscopy was used to characterize the ion textured surfaces.

Weigand, A. J.↗

Test data report, low speed wind tunnel tests of a full scale lift/cruise-fan inlet, with engine, at high angles of attack

A low speed wind tunnel test of a fixed lip inlet with engine, was performed. The inlet was close coupled to a Hamilton Standard 1.4 meter, variable pitch fan driven by a lycoming T55-L-11A engine. Tests were conducted with various combinations of inlet angle of attack freestream velocities, and fan airflows. Data were recorded to define the inlet airflow separation boundaries, performance characteristics, and fan blade stresses. The test model, installation, instrumentation, test, data reduction and final data are described.

Shain, W. M.↗

Computer program documentation D1FLTD to drive SINDA boundary nodes: User's guide

The thermal model correlation process begins when measured thermocouple data is available from the orbital flight tests of the shuttle. For this effort, it is necessary to convert some of the system improved numerical differencing analyzer (SINDA) diffusion or arithmetic nodes to boundary nodes and then drive these boundary nodes to the temperature profile of a flight measurement. An efficient way to provide this capability within the SINDA and OFT software systems is to provide a new SINDA routine, D1FLTD, for use in VARIABLES 1 of SINDA, to access the processed (word-addressable) orbital data reduction center flight data and store the appropriate measurement temperature in the desired SINDA temperature location. The ODRC flight data that is to be used for driving the boundary nodes must be assigned a logical unit number and must reside on a word-addressable file. The user must also provide two SINDA constants for the word positions of the first and last words of the temperature record for each measurement identifier (MID), i.e. each call to D1FLTD, used in the model. D1FLTD is then called from the VARIABLES 1 block to obtain the SINDA boundary node temperature for any MID on the file at any time point.

Damico, S. J.↗

Global pictures of the ozone field from high altitudes from DE-I

Detailed synoptic views of the column ozone field can be obtained by the Spin-Scan Ozone Imager (SOI) (Keating et al., 1981) aboard the Dynamics Explorer I satellite. The eccentric polar orbit with an apogee altitude of 23,000 km allows high resolution global-scale images to be obtained within 12 minutes, and allows regions to be viewed for long periods of time. At perigee, a pixel size of nadir measurements of 3 km is possible, and measurements are determined using the backscattered ultraviolet technique. A wavelength measurement of 317.5 nm is used as there are limitations in filter locations and it allows comparison with Nimbus 7 SBUV/TOMS data. Consideration of the reflectivities of this data aids in checking the SOI data reduction algorithm. SOI data show short-term (less than one day) variations in the observed ozone field, and a negative correlation (greater than 0.9) between ozone and tropopause heights. It is expected, due to this correlation, that SOI data will aid in understanding the time evolution of dynamics near the tropopause.

Keating, G. M.↗

Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment - STS 61-C results

The operation of the Shuttle Infrared Leeside Temperature Sensing experiment on mission STS 61-C of the Space Shuttle Orbiter Columbia is described. False-color video images are shown of surface temperatures on the leeside wing and fuselage areas during entry. Features evident in the imagery are related to aerodynamic flow phenomena such as shock interactions, leeside vortices, and elevon gap effects. Significant anomalies in experiment hardware operation occurred on this flight. The anomalous hardware performance resulted in requirements for major modification to the postflight data reduction procedures. The data collected provide a qualitative, but not a fully quantitative, look at leeside surface heating.

Throckmorton, David A.↗

Long duration exposure facility post-flight thermal analysis: Orbital/thermal environment data package

A post flight mission thermal environment for the Long Duration Exposure Facility was created as part of the thermal analysis data reduction effort. The data included herein is the thermal parameter data used in the calculation of boundary temperatures. This boundary temperature data is to be released in the near future for use by the LDEF principal investigators in the final analysis of their particular experiment temperatures. Also included is the flight temperature data as recorded by the LDEF Thermal Measurements System (THERM) for the first 90 days of flight.

Berrios, William M.↗