Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Phloem Exudate Protein Profiles during Drought and Recovery Reveal Abiotic Stress Responses in Tomato Vasculature

Drought is the leading cause of agricultural yield loss among all abiotic stresses, and the link between water deficit and phloem protein contents is relatively unexplored. Here we collected phloem exudates from Solanum lycopersicum leaves during periods of drought stress and recovery. Our analysis identified 2558 proteins, the most abundant of which were previously localized to the phloem. Independent of drought, enrichment analysis of the total phloem exudate protein profiles from all samples suggests that the protein content of phloem sap is complex, and includes proteins that function in chaperone systems, branched-chain amino acid synthesis, trehalose metabolism, and RNA silencing. We observed 169 proteins whose abundance changed significantly within the phloem sap, either during drought or recovery. Proteins that became significantly more abundant during drought include members of lipid metabolism, chaperone-mediated protein folding, carboxylic acid metabolism, abscisic acid signaling, cytokinin biosynthesis, and amino acid metabolism. Conversely, proteins involved in lipid signaling, sphingolipid metabolism, cell wall organization, carbohydrate metabolism, and a mitogen-activated protein kinase are decreased during drought. Our experiment has achieved an in-depth profiling of phloem sap protein contents during drought stress and recovery that supports previous findings and provides new evidence that multiple biological processes are involved in drought adaptation.

59 BASIC BIOLOGICAL SCIENCES↗

Formation of Ultra-Shallow Junctions by Advanced Plasma Doping Techniques

The fabrication of advanced CMOS devices calls for production worthy doping solutions to address requirements for increasingly shallow and abrupt junctions, while maintaining high dopant activation to meet series resistance requirements. Plasma Doping (PLAD), which has already been adopted in high volume manufacturing in the ultra high dose, low energy regime for advanced DRAM technology nodes, is now being investigated for source drain extension (SDE) implants, where precise and repeatable dopant placement is critical for maintaining control over device parameters. In this article, we investigate the process performance of SDE implants carried out in a VIISta registered PLAD system using p- type dopant precursors. Key metrics, such as junction depth, profile abruptness and sheet resistance are reported for as-implanted junctions, as well as samples processed with low thermal budget anneal techniques. Device performance data demonstrating the feasibility of the approach are presented. The advanced control features in the PLAD system are critical in enabling the process performance required for SDE implants.

36 MATERIALS SCIENCE↗

Spontaneous wrinkling of soft matter by energetic deposition of Cr and Au

Wrinkling of stiff thin films deposited on compliant substrates is an effect that has been broadly investigated. However, wrinkling consequent to metal ion implantation has been less studied. In the work described here, we have explored the sub-micron wrinkling phenomena that spontaneously occur when metal ions (Au and Cr) are implanted with energy of a few tens of electron volts (49 eV for Au and 72 eV for Cr) into a compliant material (PDMS). This very low energy ion implantation was performed using a Filtered Cathodic Vacuum Arc technique, a process often referred to as energetic deposition or energetic condensation. For comparison, Au and Cr depositions with similar doses were also done using a sputtering technique (with lower particle energy of approximately 2 eV), and no wrinkle formation was then observed. In this way, we can discuss the role of ion energy in wrinkle formation. Depth profiles of the implanted material were calculated using the Tridyn computer simulation code for each metal, for several implantation doses. UV-vis absorption spectroscopy analysis confirmed the presence of metal nanoparticles. Atomic Force Microscopy imaging with spectral processing was used to compare the wrinkle morphology for each case investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Auger electron nanoscale mapping and x-ray photoelectron spectroscopy combined with gas cluster ion beam sputtering to study an organic bulk heterojunction

The lateral and vertical distributions of organic p/n bulk heterojunctions for an organic solar cell device are, respectively, investigated using nanometer-scale Auger electron mapping and using X-ray photoelectron spectroscopy (XPS) with Ar gas cluster ion beam (GCIB) sputtering. The concentration of sulfur, present only in the p-type material, is traced to verify the distribution of p-type (donor) and n-type (acceptor) materials in the blended structure. In the vertical direction, a considerable change in atomic sulfur concentration is observed using XPS depth profiling with Ar GCIB sputtering. In addition, Auger electron mapping of sulfur reveals the lateral 2-dimensional distribution of p- and n-type materials. The combination of Auger electron mapping with Ar GCIB sputtering should thereby allow the construction of 3-dimensional distributions of p- and n-type materials in organic photovoltaic cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic transport during solid-phase epitaxial recrystallization of amorphous germanium

The atomic mixing of matrix atoms during solid-phase epitaxy (SPE) is studied by means of isotopically enriched germanium (Ge) multilayer structures that were amorphized by Ge ion implantation up to a depth of 1.5 μm. Recrystallization of the amorphous structure is performed at temperatures between 350 °C and 450 °C. Secondary-ion-mass-spectrometry is used to determine the concentration-depth profiles of the Ge isotope before and after SPE. An upper limit of 0.5 nm is deduced for the displacement length of the Ge matrix atoms by the SPE process. This small displacement length is consistent with theoretical models and atomistic simulations of SPE, indicating that the SPE mechanism consists of bond-switching with nearest-neighbours across the amorphous-crystalline (a/c) interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The origin of oxygen in oxide thin films: Role of the substrate

During the growth of oxide thin films by pulsed laser deposition, a strong oxygen substrate-to-film transfer has been experimentally observed for SrTiO{sub 3} and LaAlO{sub 3} thin films epitaxially grown on {sup 18}O exchanged SrTiO{sub 3} and LaAlO{sub 3} substrates by secondary ion mass spectrometry depth profiling. This oxygen transfer effect can seriously change the respective thin film properties. Taking the oxygen substrate contribution to the overall oxygen balance into account, original ways to design material properties of oxide thin films can be envisioned like a controlled charge carrier doping of SrTiO{sub 3} thin films.

36 MATERIALS SCIENCE↗

Electrochemical Characterization of Semiconductor Materials and Structures

For a period covering October 1, 1995 through August 12, 1996, the research group at CSU has conducted theoretical and experimental research on "Electrochemical Characterization of Semiconductor Materials and Structures. " The objective of this investigation was to demonstrate the applicability of electrochemical techniques for characterization of complex device structures based on InP and GaAs, Ge, InGaAs, InSb, InAs and InSb, including: (1) accurate EC-V net majority carrier concentration depth profiling, and (2) surface and bulk structural and electrical type defect densities. Our motivation for this R&D effort was as follows: "Advanced space solar cells and ThermoPhotoVoltaic (TPV) cells are fabricated using a large variety of III-V materials based on InP and GaAs for solar cells and low bandgap materials such as Ge, InGaAs, InAs and InSb for TPV applications. At the present time for complex device structures using these materials, however, there is no simple way to assess the quality of these structures prior to device fabrication. Therefore, process optimization is a very time consuming and a costly endeavor". Completion of this R&D effort would have had unquestionable benefits for space solar cell and TPV cells, since electrochemical characterization of the above cell structures, if properly designed can provide many useful structural and electrical material information virtually at any depth inside various layers and at the interfaces. This, could have been applied for step-by-step process optimization, which could have been used for fabrication of new generation high efficiency, low cost space PV and TPV cells.

Source record↗

Observation of Quantum Anomalous Hall Effect and Exchange Interaction in Topological Insulator/Antiferromagnet Heterostructure

Integration of a quantum anomalous Hall insulator with a magnetically ordered material provides an additional degree of freedom through which the resulting exotic quantum states can be controlled. Here, an experimental observation is reported of the quantum anomalous Hall e?ect in a magnet-ically-doped topological insulator grown on the antiferromagnetic insulator Cr?O?. The exchange coupling between the two materials is investigated using ?eld-cooling-dependent magnetometry and polarized neutron re?ec-tometry. Both techniques reveal strong interfacial interaction between the antiferromagnetic order of the Cr?O? and the magnetic topological insulator, manifested as an exchange bias when the sample is ?eld-cooled under an out-of-plane magnetic ?eld, and an exchange spring-like magnetic depth pro?le when the system is magnetized within the ?lm plane. These results identify antiferromagnetic insulators as suitable candidates for the manipula-tion of magnetic and topological order in topological insulator ?lms.

Pan, Lei↗

Atomic layer deposition of Al-doped ZnO films using ozone as the oxygen source: A comparison of two methods to deliver aluminum

Aluminum-doped ZnO films were prepared by atomic layer deposition at 250 deg. C using diethylzinc (DEZ), trimethylaluminum (TMA), and ozone as the precursors. Two deposition methods were compared to assess their impact on the composition, structural, electrical, and optical properties as a function of Al concentration. The first method controlled the Al concentration by changing the relative number of Al to Zn deposition cycles; a process reported in the literature where water was used as the oxygen source. The second method involved coinjection of the DEZ and TMA during each cycle where the partial pressures of the precursors control the aluminum concentration. Depth profiles of the film composition using Auger electron spectroscopy confirmed a layered microstructure for the films prepared by the first method, whereas the second method led to a homogeneous distribution of the aluminum throughout the ZnO film. Beneath the surface layer the carbon concentrations for all of the films were below the detection limit. Comparison of their electrical and optical properties established that films deposited by coinjection of the precursors were superior.

36 MATERIALS SCIENCE↗

Thermal stability of curved ray tomography for corrosion monitoring

Guided wave tomography is being developed as an effective tool for continuous monitoring of corrosion and erosion depth in pipelines. A pair of transmit- and receive-ring arrays of ultrasonic transducers encircles the pipe and delimits the section to be monitored. In curved ray tomography (CRT), the depth profile is estimated from the time delay matrix, Δτ, whose ij-th entry is the phase traveltime difference between the current and baseline signals measured between transducers i and j of the transmit and receive-ring arrays, respectively. Under perfectly stable experimental conditions, the non-zero entries of Δτ are only due to the occurrence of damage and provide a reliable input to CRT. However, during field operation, Δτ can develop non-zero entries due to a number of environmental changes ranging from temperature variations to degradation of transducer-pipe coupling and transducer intrinsic performance. Here, we demonstrate that these sources of instability can be eliminated by exploiting the spatial diversity of array measurements in conjunction with EMAT transducer technology which is intrinsically stable owing to its non-contact nature. The study is based on a full-scale experiment performed on a schedule 40, 8’ diameter, 3 m length steel pipe, monitored with two EMAT ring arrays. It is shown that for an irregularly shaped defect the proposed method yields maximum depth estimations that are as accurate as single point ultrasonic thickness gaging measurements and over a wide temperature range up to 175°C. The results indicate that advanced inversion schemes in combination with EMAT transduction offer great potential for continuously monitoring the progression of corrosion or erosion damage in the oil and gas industry.

42 ENGINEERING↗

Periodic oxidation for fabricating titanium oxynitride thin films via atomic layer deposition

This paper demonstrates thermal atomic layer deposition (ALD) combined with periodic oxidation for synthesizing titanium oxynitride (TiON) thin films. The process used a typical ALD reactor for the synthesis of titanium nitride (TiN) films wherein oxygen was supplied periodically between the ALD-TiN cycles. The great advantage of the process proposed here was that it allowed the TiN films to be oxidized efficiently. Also, a uniform depth profile of the oxygen concentration in the films could be obtained by tuning the oxidation conditions, allowing the process to produce a wide variety of TiON films. The resistivity measurement is a convenient method to confirm the reproducibility of metal film fabrication but may not be applicable for TiON films depending upon the oxidation condition because the films can easily turn into insulators when subjected to periodic oxidation. Therefore, an alternative reproducibility confirmation method was required. In this study, spectroscopic ellipsometry was applied to monitor the variation of TiON films and was able to detect changes in film structures such as conductor–insulator transitions in the TiON films.

36 MATERIALS SCIENCE↗

Evolution of complementary resistive switching characteristics using IrO{sub x}/GdO{sub x}/Al{sub 2}O{sub 3}/TiN structure

The complementary resistive switching (CRS) characteristics using an IrO{sub x}/GdO{sub x}/Al{sub 2}O{sub 3}/TiN single cell are observed whereas the bipolar resistive switching (BRS) characteristics are observed for the IrO{sub x}/GdO{sub x}/TiN structure. Transmission electron microscope and energy dispersive X-ray spectroscopy depth profile show crystalline GdO{sub x} film and the presence of higher amount of oxygen at both IrO{sub x}/GdO{sub x} interface and Al{sub 2}O{sub 3} layer. Inserting thin Al{sub 2}O{sub 3} layer, the BRS is changed to CRS. This CRS has hopping distance of 0.58 nm and Poole-Frenkel current conductions for the “0” and “1” states, respectively. A schematic model using oxygen vacancy filament formation/rupture at the TE/GdO{sub x} interface and Al{sub 2}O{sub 3} layer has been illustrated. This CRS device has good endurance of 1000 cycles with a pulse width of 1 μs, which is very useful for future crossbar architecture.

36 MATERIALS SCIENCE↗

Evaluation of surface damage on organic materials irradiated with Ar cluster ion beam

The sputtering yields of organic materials under large cluster ion bombardment are much higher than those under conventional monomer ion bombardment. The sputtering rate of arginine remains constant with fluence for an Ar cluster ion beam, but decreases with fluence for Ar monomer. Additionally, because Ar cluster etching induces little damage, Ar cluster ion can be used to achieve molecular depth profiling of organic materials. In this study, we evaluated the damage to poly methyl methacrylate (PMMA) and arginine samples irradiated with Ar atomic and Ar cluster ion beams. Arginine samples were analyzed by secondary ion mass spectrometry (SIMS) and PMMA samples were analyzed by X-ray photoelectron spectroscopy (XPS). The chemical structure of organic materials remained unchanged after Ar cluster irradiation, but was seriously damaged. These results indicated that bombardment with Ar cluster ions induced less surface damage than bombardment with Ar atomic ion. The damage layer thickness with 5 keV Ar cluster ion bombardment was less than 1 nm.

36 MATERIALS SCIENCE↗

X-ray excited Auger transitions of Pu compounds

X-ray excited Pu core–valence–valence and core–core–valence Auger line-shapes were used in combination with the Pu 4f photoelectron peaks to characterize differences in the oxidation state and local electronic structure for Pu compounds. The evolution of the Pu 4f core-level chemical shift as a function of sputtering depth profiling and hydrogen exposure at ambient temperature was quantified. The combination of the core–valence–valence Auger peak energies with the associated chemical shift of the Pu 4f photoelectron line defines the Auger parameter and results in a reliable method for definitively determining oxidation states independent of binding energy calibration. Results show that PuO{sub 2}, Pu{sub 2}O{sub 3}, PuH{sub 2.7}, and Pu have definitive Auger line-shapes. These data were used to produce a chemical state (Wagner) plot for select plutonium oxides. This Wagner plot allowed us to distinguish between the trivalent hydride and the trivalent oxide, which cannot be differentiated by the Pu 4f binding energy alone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure of Mo/Si multilayers with B4C diffusion barrier layers

The growth behavior of B4C interlayers deposited at the interfaces of Mo/Si multilayers was investigated using x-ray photoemission spectroscopy, x-ray reflectivity, and x-ray diffraction measurements. We report an asymmetry in the formation of B4C at the B4C-on-Mo interface compared to the B4C-on-Si interface. X-ray photoelectron spectroscopy (XPS) depth profiling shows that for B4C-on-Mo the formed stoichiometry is close to expectation (4:1 ratio), while for B4C-on-Si it is observed that carbon diffuses from the B4C interfaces into the multilayer, resulting in nonstochiometric growth (>4:1). As a result, there is a discrepancy in the optical response near 13.5 nm wavelength, where B4C-on-Mo behaves according to model simulations, while B4C-on-Si does not. The as-deposited off-stoichiometric B4C-on-Si interface also explains why these interfaces show poor barrier properties against temperature induced interdiffusion. We show that the stoichiometry of B4C at the Mo-Si interfaces is connected to the structure of the layers onto which B4C is grown. Because of enhanced diffusion into the amorphous Si surface, we suggest that deposited boron and carbon atoms form SiXBY and SiXCY compounds. The low formation enthalpy of SiXCY ensures C depletion of any BXCY interlayer. Only after a saturated interfacial layer is formed, does further deposition of boron and carbon atoms result in actual B4C formation. In contrast to the off-stoichiometric B4C growth on top of Si, B4C grown on top of Mo retains the correct stoichiometry because of the higher formation enthalpies for MoXBY and MoXCY formation and the limited diffusion depth into the (poly)-crystalline Mo surface.

36 MATERIALS SCIENCE↗

A promising concept for using near-surface measuring angles in angle-resolved x-ray photoelectron spectroscopy considering elastic scattering effects

The increasing number of applications of very thin films requires both reliable thin-layer and interface characterization. A powerful method for characterization in the nanometer thickness range is the angle-resolved x-ray photoelectron spectroscopy (ARXPS). This is a nondestructive depth-profiling method, which can provide elemental content as well as chemical information. Two of the drawbacks of ARXPS are, that it requires dedicated mathematical modeling and that, at least up until now, its use has been restricted away from near-surface angles. In this paper we present a method for the mathematical description of a few, hitherto unaccounted, measurement effects in order to improve the simulations of ARXPS data for complex surface structures. As an immediate application, we propose a simple algorithm to consider the effects of elastic scattering in the standard ARXPS data interpretation, which in principle would allow the use of the whole angular range for the analysis; thus leading to a significant increase in the usable information content from the measurements. The potential of this approach is demonstrated with model calculations for a few thin film examples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combination of grazing incidence x-ray fluorescence with x-ray reflectivity in one table-top spectrometer for improved characterization of thin layer and implants on/in silicon wafers

As Grazing Incidence X-ray Fluorescence (GIXRF) analysis does not provide unambiguous results for the characterization of nanometre layers as well as nanometre depth profiles of implants in silicon wafers by its own, the approach of providing additional information using the signal from X-ray Reflectivity (XRR) was tested. As GIXRF already uses an X-ray beam impinging under grazing incidence and the variation of the angle of incidence, a GIXRF spectrometer was adapted with an XRR unit to obtain data from the angle dependent fluorescence radiation as well as data from the reflected beam. A θ-2θ goniometer was simulated by combining a translation and tilt movement of a Silicon Drift detector, which allows detecting the reflected beam over 5 orders of magnitude. HfO{sub 2} layers as well as As implants in Silicon wafers in the nanometre range were characterized using this new setup. A just recently published combined evaluation approach was used for data evaluation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗