Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamical model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

DYNAMICAL MODEL FOR THE ZODIACAL CLOUD AND SPORADIC METEORS

The solar system is dusty, and would become dustier over time as asteroids collide and comets disintegrate, except that small debris particles in interplanetary space do not last long. They can be ejected from the solar system by Jupiter, thermally destroyed near the Sun, or physically disrupted by collisions. Also, some are swept by the Earth (and other planets), producing meteors. Here we develop a dynamical model for the solar system meteoroids and use it to explain meteor radar observations. We find that the Jupiter Family Comets (JFCs) are the main source of the prominent concentrations of meteors arriving at the Earth from the helion and antihelion directions. To match the radiant and orbit distributions, as measured by the Canadian Meteor Orbit Radar (CMOR) and Advanced Meteor Orbit Radar (AMOR), our model implies that comets, and JFCs in particular, must frequently disintegrate when reaching orbits with low perihelion distance. Also, the collisional lifetimes of millimeter particles may be longer ({approx}> 10{sup 5} yr at 1 AU) than postulated in the standard collisional models ({approx}10{sup 4} yr at 1 AU), perhaps because these chondrule-sized meteoroids are stronger than thought before. Using observations of the Infrared Astronomical Satellite to calibrate the model, we find that the total cross section and mass of small meteoroids in the inner solar system are (1.7-3.5) Multiplication-Sign 10{sup 11} km{sup 2} and {approx}4 Multiplication-Sign 10{sup 19} g, respectively, in a good agreement with previous studies. The mass input required to keep the zodiacal cloud in a steady state is estimated to be {approx}10{sup 4}-10{sup 5} kg s{sup -1}. The input is up to {approx}10 times larger than found previously, mainly because particles released closer to the Sun have shorter collisional lifetimes and need to be supplied at a faster rate. The total mass accreted by the Earth in particles between diameters D = 5 {mu}m and 1 cm is found to be {approx}15,000 tons yr{sup -1} (factor of two uncertainty), which is a large share of the accretion flux measured by the Long Term Duration Facility. The majority of JFC particles plunge into the upper atmosphere at <15 km s{sup -1} speeds, should survive the atmospheric entry, and can produce micrometeorite falls. This could explain the compositional similarity of samples collected in the Antarctic ice and stratosphere, and those brought from comet Wild 2 by the Stardust spacecraft. Meteor radars such as CMOR and AMOR see only a fraction of the accretion flux ({approx}1%-10% and {approx}10%-50%, respectively), because small particles impacting at low speeds produce ionization levels that are below these radars' detection capabilities.

79 ASTRONOMY AND ASTROPHYSICS↗

CoDCon Dynamic Modeling.

The Co-Decontamination (CoDCon) Demonstration project is designed to test the separation of a mixed U and Pu product from dissolved spent nuclear fuel. The primary purpose of the project is to quantify the accuracy and precision to which a U/Pu mass ratio can be achieved without removing a pure Pu product. The system includes an on-line monitoring system using spectroscopy to monitor the ratios throughout the process. A dynamic model of the CoDCon flowsheet and on-line monitoring system was developed in order to expand the range of scenarios that can be examined for process control and determine overall measurement uncertainty. The model development and initial results are presented here.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Dynamic modelling and estimation of the error due to asynchronism in a redundant asynchronous multiprocessor system

The use of Redundant Asynchronous Multiprocessor System to achieve ultrareliable Fault Tolerant Control Systems shows great promise. The development has been hampered by the inability to determine whether differences in the outputs of redundant CPU's are due to failures or to accrued error built up by slight differences in CPU clock intervals. This study derives an analytical dynamic model of the difference between redundant CPU's due to differences in their clock intervals and uses this model with on-line parameter identification to idenitify the differences in the clock intervals. The ability of this methodology to accurately track errors due to asynchronisity generate an error signal with the effect of asynchronisity removed and this signal may be used to detect and isolate actual system failures.

Huynh, Loc C.↗

Dynamical Model for the Zodiacal Cloud and Sporadic Meteors

The solar system is dusty, and would become dustier over time as asteroids collide and comets disintegrate, except that small debris particles in interplanetary space do not last long. They can be ejected from the solar system by Jupiter, thermally destroyed near the Sun, or physically disrupted by collisions. Also, some are swept by the Earth (and other planets), producing meteors. Here we develop a dynamical model for the solar system meteoroids and use it to explain meteor radar observations. We find that the Jupiter Family Comets (JFCs) are the main source of the prominent concentrations of meteors arriving to the Earth from the helion and antihelion directions. To match the radiant and orbit distributions, as measured by the Canadian Meteor Orbit Radar (CMOR) and Advanced Meteor Orbit Radar (AMOR), our model implies that comets, and JFCs in particular, must frequently disintegrate when reaching orbits with low perihelion distance. Also, the collisional lifetimes of millimeter particles may be longer (approx. > 10(exp 5) yr at 1 AU) than postulated in the standard collisional models (approx 10(exp 4) yr at 1 AU), perhaps because these chondrule-sized meteoroids are stronger than thought before. Using observations of the Infrared Astronomical Satellite (IRAS) to calibrate the model, we find that the total cross section and mass of small meteoroids in the inner solar system are (1.7-3.5) 10(exp 11) sq km and approx. 4 10(exp 19) g, respectively, in a good agreement with previous studies. The mass input required to keep the Zodiacal Cloud (ZC) in a steady state is estimated to be approx. 10(exp 4)-10(exp 5) kg/s. The input is up to approx 10 times larger than found previously, mainly because particles released closer to the Sun have shorter collisional lifetimes, and need to be supplied at a faster rate. The total mass accreted by the Earth in particles between diameters D = 5 micron and 1 cm is found to be approx 15,000 tons/yr (factor of 2 uncertainty), which is a large share of the accretion flux measured by the Long Term Duration Facility (LDEF). Majority of JFC particles plunge into the upper atmosphere at <15 km/s speeds, should survive the atmospheric entry, and can produce micrometeorite falls. This could explain the compositional similarity of samples collected in the Antarctic ice and stratosphere, and those brought from comet Wild 2 by the Stardust spacecraft. Meteor radars such as CMOR and AMOR see only a fraction of the accretion flux (approx 1- 10% and approx 10-50%, respectively), because small particles impacting at low speeds produce ionization levels that are below these radars detection capabilities.

Nesvorny, David↗

Predictability experiments using a low order empirically corrected dynamical model

It is generally accepted that day to day weather variations possess a finite range of predictability estimated to be approximately two weeks (e.g., Lorenz, 1965). However, considerable observational evidence points to the existence of a number of low frequency flow regimes which are potentially predictable beyond this limit. These include blocking events and teleconnection patterns such as those described in Wallace and Gutzler (1981). The problem of the predictability of such modes is addressed by employing a highly simplified dynamical model projected onto the modes of interest. These modes are computed from an empirical orthogonal function (EOF) analysis of 10-day averaged anomalies (deviations from the mean seasonal cycle) of the 500 mb stream function for the winters of 1967-76. The first three EOF's are associated with an index cycle and some of the teleconnection patterns. The fourth and ninth are related to North Pacific and North Atlantic blocking, respectively.

Schubert, S.↗

A dynamic model for plant growth: validation study under changing temperatures

A dynamic simulation model to describe vegetative growth of plants, for which some functions and parameter values have been estimated previously by optimization search techniques and numerical experimentation based on data from constant temperature experiments, is validated under conditions of changing temperatures. To test the predictive capacity of the model, dry matter accumulation in the leaves, stems, and roots of tobacco plants (Nicotiana tabacum L.) was measured at 2- or 3-day intervals during a 5-week period when temperatures in controlled-environment rooms were programmed for changes at weekly and daily intervals and in ascending or descending sequences within a range of 14 to 34 degrees C. Simulations of dry matter accumulation and distribution were carried out using the programmed changes for experimental temperatures and compared with the measured values. The agreement between measured and predicted values was close and indicates that the temperature-dependent functional forms derived from constant-temperature experiments are adequate for modelling plant growth responses to conditions of changing temperatures with switching intervals as short as 1 day.

NASA Discipline Number 60-40↗

Preliminary Dynamic Modeling of the Quarter-Scale Distributed Electric Propulsion Aircraft

This paper describes the early-stage modeling of a quarter-scale distributed electric propulsion aircraft, based on the SUbsonic Single Aft eNgine (SUSAN) Electrofan, a transformative concept aircraft for which a model exists. The full-scale 180 passenger SUSAN concept has a single turbofan engine in the tail that both produces thrust and provides electrical power to 16 electric fans distributed across the wings utilizing a series/parallel hybrid architecture. The quarter-scale version would have an internal combustion piston engine to provide power to 17 electric fans–16 on the wings, one in the tail–in a series hybrid configuration, and no vertical or horizontal stabilizers. It would also have a reduced flight envelope in terms of both altitude and speed. The initial modeling approach is to scale down the original airframe model to capture the dynamic behavior of a much smaller aircraft, albeit with an empennage. The original powertrain model is then replaced with one representing the physical components of that of the quarter-scale vehicle. This powertrain model is suitable for control design and analysis, and the fully integrated, although preliminary, aircraft model allows flight simulator testing and evaluation. Results from simulations are presented.

electrified aircraft propulsion↗

Preliminary Dynamic Modeling of the Quarter-Scale Distributed Electric Propulsion Aircraft

This presentation describes the early-stage modeling of a quarter-scale distributed electric propulsion aircraft, based on the SUbsonic Single Aft eNgine (SUSAN) Electrofan, a transformative concept aircraft for which a model exists. The full-scale 180 passenger SUSAN concept has a single turbofan engine in the tail that both produces thrust and provides electrical power to 16 electric fans distributed across the wings utilizing a series/parallel hybrid architecture. The quarter-scale version would have an internal combustion piston engine to provide power to 17 electric fans–16 on the wings, one in the tail–in a series hybrid configuration, and no vertical or horizontal stabilizers. It would also have a reduced flight envelope in terms of both altitude and speed. The initial modeling approach is to scale down the original airframe model to capture the dynamic behavior of a much smaller aircraft, albeit with an empennage. The original powertrain model is then replaced with one representing the physical components of that of the quarter-scale vehicle. This powertrain model is suitable for control design and analysis, and the fully integrated, although preliminary, aircraft model allows flight simulator testing and evaluation. Results from simulations are presented.

electrified aircraft propulsion↗

Preliminary Dynamic Modeling of the Quarter-Scale Distributed Electric Propulsion Aircraft

This paper describes the early-stage modeling of a quarter-scale distributed electric propulsion aircraft, based on the SUbsonic Single Aft eNgine (SUSAN) Electrofan, a transformative concept aircraft for which a model exists. The full-scale 180 passenger SUSAN concept has a single turbofan engine in the tail that both produces thrust and provides electrical power to 16 electric fans distributed across the wings utilizing a series/parallel hybrid architecture. The quarter-scale version would have an internal combustion piston engine to provide power to 17 electric fans–16 on the wings, one in the tail–in a series hybrid configuration, and no vertical or horizontal stabilizers. It would also have a reduced flight envelope in terms of both altitude and speed. The initial modeling approach is to scale down the original airframe model to capture the dynamic behavior of a much smaller aircraft, albeit with an empennage. The original powertrain model is then replaced with one representing the physical components of that of the quarter-scale vehicle. This powertrain model is suitable for control design and analysis, and the fully integrated, although preliminary, aircraft model allows flight simulator testing and evaluation. Results from simulations are presented.

Electrified powertrain↗

Stochastic-Dynamical Modeling of Space Time Rainfall

The focus of this research work is the elucidation of the physical origins of the observed extreme-rainfall variability over tropical oceans. The quantitative results of this work may be used to establish links between deterministic models of the mesoscale and synoptic scale with statistical descriptions of the temporal variability of local tropical oceanic rainfall. In addition, they may be used to quantify the influence of measurement error in large-scale forcing and cloud scale observations on the accuracy of local rainfall variability inferences, important for hydrologic studies. A simple statistical-dynamical model, suitable for use in repetitive Monte Carlo experiments, is formulated as a diagnostic tool for this purpose. Stochastic processes with temporal structure and parameters estimated from observed large-scale data represent large-scale forcing.

Georgankakos, Konstantine P.↗

System dynamic model and charging control of lead-acid battery for stand-alone solar PV system

The lead-acid battery which is widely used in stand-alone solar system is easily damaged by a poor charging control which causes overcharging. The battery charging control is thus usually designed to stop charging after the overcharge point. This will reduce the storage energy capacity and reduce the service time in electricity supply. The design of charging control system however requires a good understanding of the system dynamic behaviour of the battery first. In the present study, a first-order system dynamics model of lead-acid battery at different operating points near the overcharge voltage was derived experimentally, from which a charging control system based on PI algorithm was developed using PWM charging technique. The feedback control system for battery charging after the overcharge point (14 V) was designed to compromise between the set-point response and the disturbance rejection. The experimental results show that the control system can suppress the battery voltage overshoot within 0.1 V when the solar irradiation is suddenly changed from 337 to 843 W/m{sup 2}. A long-term outdoor test for a solar LED lighting system shows that the battery voltage never exceeded 14.1 V for the set point 14 V and the control system can prevent the battery from overcharging. The test result also indicates that the control system is able to increase the charged energy by 78%, as compared to the case that the charging stops after the overcharge point (14 V). (author)

14 SOLAR ENERGY↗

Validation of a Multiphase Computational Fluid Dynamics Model for Vapor Pull-Through in Normal and Low Gravity

On-orbit fluid transfer such as refueling of propellant tanks and life-support systems can enable long-duration space missions. For safe and efficient liquid transfer operations, prior knowledge of liquid positioning and liquid-vapor interface behavior while draining in a low-gravity environment is required. Numerical models capable of predicting vapor ingestion (or vapor pull-through) can be used to design liquid transfer operations while reducing liquid residuals, mission risk and settling thrust required to prevent vapor ingestion. An experimental program conducted in the 2.2 Second Drop Tower facility at NASA Glenn Research Center investigated the vapor ingestion phenomenon for a range of outflow rates and tank sizes providing a database for validation. This study presents a Computational Fluid Dynamics model capable of accurately predicting the vapor ingestion using the Volume-of-Fluid multiphase solver in commercial code STAR-CCM+. A description of the experimental setup and general trends from similar studies are presented. Comparisons of the numerical prediction and test data in normal and low gravity show good agreement and give confidence in pursuing design of full-scale propellant transfer systems.

Computational Fluid Dynamics↗

Validation of a Multiphase Computational Fluid Dynamics Model for Vapor Pull-Through in Normal and Low Gravity

On-orbit fluid transfer such as refueling of propellant tanks and life-support systems can enable long-duration space missions. For safe and efficient liquid transfer operations, prior knowledge of liquid positioning and liquid-vapor interface behavior while draining in a reduced-gravity environment is required. Numerical models capable of predicting vapor ingestion (or vapor pull-through) can be used to design liquid transfer operations while reducing liquid residuals, mission risk and settling thrust required to prevent vapor ingestion. An experimental program conducted in the 2.2 Second Drop Tower facility at NASA Lewis Research Center in 1969 investigated the vapor ingestion phenomenon for a range of outflow rates and tank sizes providing a database for validation. This study presents a Computational Fluid Dynamics model capable of accurately predicting the vapor ingestion using the Volume-of-Fluid multiphase solver in commercial code STAR-CCM+. A description of the experimental setup and general trends from similar studies are presented. Comparisons of the numerical prediction and test data in normal and low gravity show good agreement and give confidence in pursuing design of full-scale propellant transfer systems.

Computational Fluid Dynamics↗

Validation of A Multiphase Computational Fluid Dynamics Model for Vapor Pull-Through in Normal and Low Gravity

On-orbit fluid transfer such as refueling of propellant tanks and life-support systems can enable long-duration space missions. For safe and efficient liquid transfer operations, prior knowledge of liquid positioning and liquid-vapor interface behavior while draining in a reduced-gravity environment is required. Numerical models capable of predicting vapor ingestion (or vapor pull-through) can be used to design liquid transfer operations while reducing liquid residuals, mission risk and settling thrust required to prevent vapor ingestion. An experimental program conducted in the 2.2 Second Drop Tower facility at NASA Lewis Research Center in 1969 investigated the vapor ingestion phenomenon for a range of outflow rates and tank sizes providing a database for validation. This study presents a Computational Fluid Dynamics model capable of accurately predicting the vapor ingestion using the Volume-of-Fluid multiphase solver in commercial code STAR-CCM+. A description of the experimental setup and general trends from similar studies are presented. Comparisons of the numerical prediction and test data in normal and low gravity show good agreement and give confidence in pursuing design of full-scale propellant transfer systems.

Propellant Transfer↗

Dynamic Modelling and Performance Evaluation of a Chemisorption Heat Pump for Cold Climate

Space heating is a significant contributor to the energy consumption in residential buildings, especially in cold climates where electric-driven heat pumps lose the advantage of high efficiency and conventional gas-combustion furnaces have limited efficiency. Chemical adsorption (chemisorption) heat pumps (CSHP) have the potential for producing heating with high energy efficiency under cold operating conditions. A CSHP operates intermittently between desorption and adsorption modes, and their performance is affected by system design and transient system control. This study developed a dynamic model and used it to evaluate the daily system performance under different designs and controls, particularly the buffer tank size and the controlled minimum heating power. The simulation results revealed the effects of these parameters on the system performance and helped identify the optimal design and control for the highest coefficient of performance and heating capacity.

Yang, Zhiyao↗

Enhancing Skill of Initialized Decadal Predictions Using a Dynamic Model of Drift

Since near-term predictions of present-day climate are controlled by both initial condition predictability and boundary condition predictability, initialized prediction experiments aim to augment the external-forcing-related predictability realized in uninitialized projections with initial-condition-related predictability by appropriate observation-based initialization. However, and notwithstanding the considerable effort expended in finding such “good” initial states, a striking feature of current, state-of-the-art, initialized decadal hindcasts is their tendency to quickly drift away from the initialized state, with attendant loss of skill. We derive a dynamical model for such drift, and after validating it we show that including a recalibrated version of the model in a postprocessing framework is able to significantly augment the skill of initialized predictions beyond that achieved by a use of current techniques of postprocessing alone. We also show that the new methodology provides further crucial insights into issues related to initialized predictions.

58 GEOSCIENCES↗