Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Molecular Structures of Fluid Phase Phosphatidylglycerol Bilayers as Determined by Small Angle Neutron and X-ray Scattering

We have determined the molecular structures of commonly used phosphatidylglycerols (PGs) in the commonly accepted biologically relevant fluid phase. This was done by simultaneously analyzing small-angle neutron and X-ray scattering data, with the constraint of a measured volume per lipid. We report the temperature dependence of bilayer parameters obtained using the one dimensional scattering density profile model derived from molecular dynamics simulations, including the area per lipid, the overall bilayer thickness, as well as other intrabilayer parameters (e.g., hydrocarbon thickness). Lipid areas are found to be larger than their phosphatidylcholine (PC) counterparts, a result likely due to repulsive electrostatic interactions taking place between the charged PG headgroups even in the presence of Na+ counterions. In general, PG and PC bilayers show a similar response to changes in temperature and chain length, but differ in their response to chain unsaturation. For example, compared to their PC counterparts, the inclusion of a double bond in PG lipids results in a smaller incremental change in lipid area and bilayer thickness. However, the extrapolated lipid area of saturated PG lipids at infinite chain length is found to be similar to that of PCs, an indication of the glycerol-carbonyl backbone's pivotal role in influencing the lipid-water interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Cysteine Substitutions on the Structural and Magnetic Properties of Fe{sub 3}O{sub 4}–Cysteine/RGO and Fe{sub 3}O{sub 4}/RGO–Cysteine Nanocomposites

We synthesized by electrostatic self-assembly route in basic solution Fe{sub 3}O{sub 4}–cysteine/RGO and Fe{sub 3}O{sub 4}/RGO–cysteine nanocomposites. In this method, electrostatic interaction was created via negatively charged surface of the reduced graphene oxide and reduced graphene oxide–cysteine sheets and positively charged surface of the Fe{sub 3}O{sub 4} and Fe{sub 3}O{sub 4}–Cys nanoparticles in aqueous solution. The structural and magnetic properties of the prepared samples were analyzed by x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM), respectively. The dependences of magnetization as a function of applied field using a vibrating sample magnetometer exhibit S-like curves, indicating a magnetic hysteresis behavior for all samples. It clearly showed that, the nanocomposites showed a reduction of saturation magnetization to the Fe{sub 3}O{sub 4} nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Probing the Influence of Stereoelectronic Effects on the Biophysical Properties of Oligonucleotides: Comprehensive Analysis of the RNA Affinity, Nuclease Resistance, and Crystal Structure of Ten 2'-O-Ribonucleic Acid Modifications

The syntheses of 10 new RNA 2'-O-modifications, their incorporation into oligonucleotides, and an evaluation of their properties such as RNA affinity and nuclease resistance relevant to antisense activity are presented. All modifications combined with the natural phosphate backbone lead to significant gains in terms of the stability of hybridization to RNA relative to the first-generation DNA phosphorothioates (PS-DNA). The nuclease resistance afforded in particular by the 2'-O-modifications carrying a positive charge surpasses that of PS-DNA. However, small electronegative 2'-O-substituents, while enhancing the RNA affinity, do not sufficiently protect against degradation by nucleases. Similarly, oligonucleotides containing 3'-terminal residues modified with the relatively large 2'-O-[2-(benzyloxy)ethyl] substituent are rapidly degraded by exonucleases, proving wrong the assumption that steric bulk will generally improve protection against nuclease digestion. To analyze the factors that contribute to the enhanced RNA affinity and nuclease resistance we determined crystal structures of self-complementary A-form DNA decamer duplexes containing single 2'-O-modified thymidines per strand. Conformational preorganization of substituents, favorable electrostatic interactions between substituent and sugar-phosphate backbone, and a stable water structure in the vicinity of the 2'-O-modification all appear to contribute to the improved RNA affinity. Close association of positively charged substituents and phosphate groups was observed in the structures with modifications that protect most effectively against nucleases. The promising properties exhibited by some of the analyzed 2'-O-modifications may warrant a more detailed evaluation of their potential for in vivo antisense applications. Chemical modification of RNA can also be expected to significantly improve the efficacy of small interfering RNAs (siRNA). Therefore, the 2'-O-modifications introduced here may benefit the development of RNAi therapeutics.

36 MATERIALS SCIENCE↗

In vitro release of organophosphorus acid anhydrolase from functionalized mesoporous silica against nerve agents.

We report here that under different physiological conditions, biomolecular drugs can be stockpiled in a nanoporous support and afterward can be instantly released when needed for acute responses, and the biomolecular drug molecules can also be gradually released from the nanoporous support over a long time for a complete recovery. Organophosphorus acid anhydrolase (OPAA) was spontaneously and largely entrapped in functionalized mesoporous silica (FMS) due to the dominant electrostatic interaction. The OPAA-FMS composite exhibited a burst release in a pH 9.0 NaHCO(3)-Na(2)CO(3) buffer system and a gradual release in pH 7.4 simulated body fluid. The binding of OPAA to NH(2)-FMS can result in less tyrosinyl and tryptophanyl exposure OPAA molecules to aqueous environment. The bound OPAA in FMS displayed lower activity than the free OPAA in solution prior to the enzyme entrapment. However, the released enzyme maintained the native conformational structure and the same high enzymatic activity as that prior to the enzyme entrapment. The in vitro results in the rabbit serum demonstrate that both OPAA-FMS and the released OPAA may be used as a medical countermeasure against the organophosphorus nerve agents.

59 BASIC BIOLOGICAL SCIENCES↗

The Roles of Molecular Structure and Effective Optical Symmetry in Evolving Dipolar Chromophoric Building Blocks to Potent Octopolar Nonlinear Optical Chromophores

A series of mono-, bis-, tris-, and tetrakis(porphinato)zinc(II) (PZn)-elaborated ruthenium(II) bis(terpyridine) (Ru) complexes have been synthesized in which an ethyne unit connects the macrocycle meso carbon atom to terpyridyl (tpy) 4-, 4²-, and 4²-positions. These supermolecular chromophores, based on the ruthenium(II) [5-(4²-ethynyl-(2,2²;6²,2²-terpyridinyl))-10,20-bis(2²,6²-bis(3,3-dimethyl-1-butyloxy)phenyl)porphinato]zinc(II)-(2,2²;6²,2²-terpyridine)2+ bis-hexafluorophosphate (RuPZn) archetype, evince strong mixing of the PZn-based oscillator strength with ruthenium terpyridyl charge resonance bands. Potentiometric and linear absorption spectroscopic data indicate that for structures in which multiple PZn moieties are linked via ethynes to a [Ru(tpy)2]2+ core, little electronic coupling is manifest between PZn units, regardless of whether they are located on the same or opposite tpy ligand. Congruent with these experiments, pump probe transient absorption studies suggest that the individual RuPZn fragments of these structures exhibit, at best, only modest excited-state electronic interactions that derive from factors other than the dipole dipole interactions of these strong oscillators; this approximate independent character of the component RuPZn oscillators enables fabrication of nonlinear optical (NLO) multipoles with extraordinary hyperpolarizabilities. Dynamic hyperpolarizability (βλ) values and depolarization ratios (Ï) were determined from hyper-Rayleigh light scattering (HRS) measurements carried out at an incident irradiation wavelength (λinc) of 1300 nm. The depolarization ratio data provide an experimental measure of chromophore optical symmetry; appropriate coupling of multiple charge-transfer oscillators produces structures having enormous averaged hyperpolarizabilities (βHRS values), while evolving the effective chromophore symmetry from purely dipolar (e.g., Ru(tpy)[4-(Zn-porphyrin)ethynyl-tpy](PF6)2, βHRS = 1280 10-30 esu, Ï = 3.8; Ru(tpy)[4²-(Zn-porphyrin)ethynyl-tpy](PF6)2, βHRS = 2100 10-30 esu, Ï = 3.8) to octopolar (e.g., Ru[4,4²-bis(Zn-porphyrin)ethynyl-tpy]2(PF6)2, βHRS = 1040 10-30 esu, Ï = 1.46) via structural motifs that possess intermediate values of the depolarization ratio. The chromophore design roadmap provided herein gives rise to octopolar supermolecules that feature by far the largest off-diagonal octopolar first hyperpolarizability tensor components ever reported, with the effectively octopolar Ru[4,4²-bis(Zn-porphyrin)ethynyl-tpy]2(PF6)2 possessing a βHRS value at 1300 nm more than a factor of 3 larger than that determined for any chromophore having octopolar symmetry examined to date. Because NLO octopoles possess omnidirectional NLO responses while circumventing the electrostatic interactions that drive bulk-phase centrosymmetry for NLO dipoles at high chromophore concentrations, the advent of octopolar NLO chromophores having vastly superior βHRS values at technologically important wavelengths will motivate new experimental approaches to achieve acentric order in both bulk-phase and thin film structures.

36 MATERIALS SCIENCE↗

Crystal Structures of Covalent Complexes of [beta]-Lactam Antibiotics with Escherichia coli Penicillin-Binding Protein 5: Toward an Understanding of Antibiotic Specificity

Penicillin-binding proteins (PBPs) are the molecular targets for the widely used {beta}-lactam class of antibiotics, but how these compounds act at the molecular level is not fully understood. We have determined crystal structures of Escherichia coli PBP 5 as covalent complexes with imipenem, cloxacillin, and cefoxitin. These antibiotics exhibit very different second-order rates of acylation for the enzyme. In all three structures, there is excellent electron density for the central portion of the {beta}-lactam, but weak or absent density for the R1 or R2 side chains. Areas of contact between the antibiotics and PBP 5 do not correlate with the rates of acylation. The same is true for conformational changes, because although a shift of a loop leading to an electrostatic interaction between Arg248 and the {beta}-lactam carboxylate, which occurs completely with cefoxitin and partially with imipenem and is absent with cloxacillin, is consistent with the different rates of acylation, mutagenesis of Arg248 decreased the level of cefoxitin acylation only 2-fold. Together, these data suggest that structures of postcovalent complexes of PBP 5 are unlikely to be useful vehicles for the design of new covalent inhibitors of PBPs. Finally, superimposition of the imipenem-acylated complex with PBP 5 in complex with a boronic acid peptidomimetic shows that the position corresponding to the hydrolytic water molecule is occluded by the ring nitrogen of the {beta}-lactam. Because the ring nitrogen occupies a similar position in all three complexes, this supports the hypothesis that deacylation is blocked by the continued presence of the leaving group after opening of the {beta}-lactam ring.

36 MATERIALS SCIENCE↗

Charge regulation effects on colloidal mixture nanoparticles

Changes in pH within a system containing dissociable sites affect the protonation and deprotonation of these groups, thereby influencing their physical properties. In response, the system modifies their surface charge, affecting electrostatic interactions, aggregation, stability, and structural behavior. Although the pH can be tuned in experiments, it is difficult to model this phenomenon using simulations or theoretical approaches. Here, we perform hybrid Monte Carlo-molecular dynamics simulations to model charge regulation effects in an equimolar colloidal charged system. We compare charge regulation effects with those of a system in which the charges of colloidal nanoparticles are not dissociable. The comparison between the two cases modifies the phase diagram, and it changes the volume fraction where a percolation network of nanoparticles is found. Charge regulation is found to destroy network formation, as the charge in the nanoparticles is modified because of the cooperativity dependency of the degree of charge dissociation sites among the nanoparticles favoring cluster formation. Furthermore, our work suggests that the ionic and/or electronic conductivity in functionalized nanoparticles can be modified by changing pH values. It also guides the experimental design of oppositely charged nanoparticles as inks for 3D printing processes.

Classical statistical mechanics↗

Molecular dynamics simulations of ionic aggregates in a coarse%3CU%2B2010%3Egrained ionomer melt.

Ionomers--polymers containing a small fraction of covalently bound ionic groups--have potential application as solid electrolytes in batteries. Understanding ion transport in ionomers is essential for such applications. Due to strong electrostatic interactions in these materials, the ions form aggregates, tending to slow counterion diffusion. A key question is how ionomer properties affect ionic aggregation and counterion dynamics on a molecular level. Recent experimental advances have allowed synthesis and extensive characterization of ionomers with a precise, constant spacing of charged groups, making them ideal for controlled measurement and more direct comparison with molecular simulation. We have used coarse-grained molecular dynamics to simulate such ionomers with regularly spaced charged beads. The charged beads are placed either in the polymer backbone or as pendants on the backbone. The polymers, along with the counterions, are simulated at melt densities. The ionic aggregate structure was determined as a function of the dielectric constant, spacing of the charged beads on the polymer, and the sizes of the charged beads and counterions. The pendant ion architecture can yield qualitatively different aggregate structures from those of the linear polymers. For small pendant ions, roughly spherical aggregates have been found above the glass transition temperature. The implications of these aggregates for ion diffusion will be discussed.

36 MATERIALS SCIENCE↗

Molecular Processes Underlying the Structure and Assembly of Thin Films and Nanoparticles at Complex interfaces

Since 1995 we have pursued a number of different studies that are quite diverse in nature but with the common theme of using novel laser based methods to study important processes at buried interfaces. Studies of Corrosion, Passivation on n-GaAs(100)Methanol Photoelectrochemical Cell In these studies we have used picosecond photoluminescence and electrochemical studies to understand the GaAs/methanol interface. In our most extensive set of studies we conducted photo-illumination and XPS experiments to understand the chemistry occurring in the GaAs/methanol photoelectrochemical during photoexcitation. An important distinction between photocorrosion and photoetching of GaAs is elucidated by these studies. The dependence of GaAs photocorrosion on light intensity has been explored to better understand intrinsic differences between the lamplight studies and the picosecond photoluminescence studies. The effect of coating the GaAs with a sulfide layer prior to immersion in the cell has also been explored. This last result has led us to examine n-GaAs as a function of crystallographic orientation after exposure to aqueous Na 2 S containing solutions has been studied as a function of crystallographic orientation of the GaAs surface. The (100) and (110) surfaces are relatively similar, with significant amounts of As-S species present at the interface. The (111)B surface lacks this constituent, but shows significant amounts of metallic As. The XPS results have been correlated with the results of previous photocorrosion and passivation studies conducted in a photoelectrochemical cell. The studies indicate that the metallic As present at (111)B surface contributes strongly to the large surface recombination velocity found there, and to the inability of Na 2 S to passivate the (111)B surface. SAMS Under Water: Water Molecular Structure and Bonding at Hydrophobic Surfaces In these DOE sponsored studies we have been interested in learning the similarities and differences in how water behaves at hydrophobic self-assembled monolayer (SAMS)/water interfaces relative to the organic liquid/water interfaces. Several monolayer films have been examined in these studies using a combination of vibrational sum frequency spectroscopy (VSFS), contact angle measurements and AFM. At the hydrocarbon monolayer/water interface we find that water has a weak bonding interaction with the monolayer film that results in an orientation of water at the terminus of these hydrocarbon chains. The water-film interaction is still present for fluorinated films but it is found to be considerably weaker. Hydration and Surfactant Adsorption at Salt/Water Interfaces This set of studies has examined the molecular characteristics of the CaF 2 /water interface using VSFS. Our first studies detailed the structure and orientation of water molecules adsorbed at this mineral surfaces including studies of the surface in the presence of aqueous solutions of salts. These studies have been followed by a series of static and time-resolved studies of the adsorption of carboxylic acid containing organics at this surface, specifically carboxylic acid surfactants and acetic acid. In the latter we have developed a new method for time resolved studies that involve sequential wavelength tuning and automated control of spatial beam overlap at the target can probe amplitude changes of sum-frequency resonances in widely spaced infrared regions. This offers great advantages for the study of the synchronism of molecular processes at interfaces. This approach is particularly suitable to investigate the synchronization of interfacial processes such as surfactant adsorption at charged mineral surfaces. Macromolecular Assembly at Liquid/Liquid Interfaces Macromolecular assembly at the interface between water and a hydrophobic surface underlies some of the most important biological and environmental processes on the planet. Our work has examined polymer adsorption and assembly of carboxylic acid-containing polyelectrolytes at the carbon tetrachloride–water interface, a model system for an oil–water interface. Using VSFS and interfacial tension techniques, these unique set of studies identify the factors that dictate whether or not polyelectrolytes will adsorb to the oil–water interface and also describe the specifics of the adsorption process that depend upon factors such as polymer size, charge density, hydrophobicity, conformation, and the effect of metal ion electrostatics and bonding. The systems studied include polyelectrolytes polyacrylic acid (PAA) and polymethylacrylic acid (PMA) of different polymer sizes and under different aqueous solution conditions. The studies are the first to show the highly ordered nature of the adsorption of the first monolayer with subsequent monolayers disordered. The second set of studies have examined how peptoid nanosheets assemble at the oil/water interface. Peptoid nanosheets are a recently discovered class of two-dimensional (2D) nanomaterial, which form from the self-assembly of a sequence-specific peptoid polymer at an air-water interface. Nanosheet formation occurs first through the assembly of a peptoid monolayer and subsequent compression into a bilayer structure. In these highly successful studies we have shown that the oil-water interface provides another opportunity for growth of these unique and highly ordered peptoid sheets. The monolayer formed at this interface are found through surface spectroscopic measurements to be highly ordered and electrostatic interactions between the charged moieties, namely carboxylate and ammonium residues, of the peptoid are essential in the ability of these peptoids to form ordered nanosheets at the oil-water interface.

36 MATERIALS SCIENCE↗

Neptunium(V) adsorption to bacteria at low and high ionic strength

Np(V) is expected to be the predominant oxidation state of neptunium in aerobic natural waters. Np(V), as the NpO{sub 2}{sup +} aquo and associated complexed species, is readily soluble, weakly interacting with geologic media, and has a high redox stability under a relatively wide range of subsurface conditions. These chemical properties, along with a long half-life make it a primary element of concern regarding long-term nuclear waste storage and subsurface contaminant. The fate and transport of neptunium in the environment may be influenced by adsorption onto bacterial surfaces. The adsorption of neptunium to bacterial surfaces ties the mobility of the contaminant to the mobility of the bacterium. In this study, the adsorption of the neptunyl (NpO{sub 2}{sup +}) ion was evaluated at low ionic strength on a common soil bacterium and at high ionic strength on a halophilic bacterium isolated from a briny groundwater near the Waste Isolation Pilot Plant (WIPP) in southeast New Mexico. Adsorption experiments were performed in batch reactors as a function of pH, ionic strength, and bacterialNp mass ratio. Np(V) adsorption was modeled using a surface complexation approach with the mathematical program FITEQL to determine functional group specific binding constants. The data from acid and base titrations of the bacteria were also modeled to estimate the concentrations and deprotonation constants of discrete bacterial surface functional groups. Bacterial functional group characteristics and Np(V) adsorption behavior between the soil bacterium and the halophilic bacterium were compared. These results highlight the key similarities and differences in actinide adsorption behavior in environments of significantly different ionic strength. Similarities in adsorption behavior may be linked to similarities in the characteristics of the moieties between all bacterial cell walls. Differences in adsorption behavior may reflect differences in ionic strength effects, rather than differences in bacteria type, as the electronic double layer is compressed with increasing ionic strength. These results further highlight the importance of electrostatic interactions in the adsorption process between dissolved metals and bacterial surfaces. This work expands the understanding of actinide-bacteria adsorption phenomena to high ionic strength environmental conditions that are relevant as an aid to predicting Np(V) fate and transport behavior in areas such as the vicinity of salt-based nuclear waste repositories and high ionic-strength deep ground waters at DOE sites.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Key Role of Active-Site Water Molecules in Bacteriorhodopsin Proton-Transfer Reactions

The functional mechanism of the light-driven proton pump protein bacteriorhodopsin depends on the location of water molecules in the active site at various stages of the photocycle and on their roles in the proton-transfer steps. Here, free energy computations indicate that electrostatic interactions favor the presence of a cytoplasmic-side water molecule hydrogen bonding to the retinal Schiff base in the state preceding proton transfer from the retinal Schiff base to Asp85. However, the nonequilibrium nature of the pumping process means that the probability of occupancy of a water molecule in a given site depends both on the free energies of insertion of the water molecule in this and other sites during the preceding photocycle steps and on the kinetic accessibility of these sites on the time scale of the reaction steps. The presence of the cytoplasmic-side water molecule has a dramatic effect on the mechanism of proton transfer: the proton is channeled on the Thr89 side of the retinal, whereas the transfer on the Asp212 side is hindered. Reaction-path simulations and molecular dynamics simulations indicate that the presence of the cytoplasmic-side water molecule permits a low-energy bacteriorhodopsin conformer in which the water molecule bridges the twisted retinal Schiff base and the proton acceptor Asp85. From this low-energy conformer, proton transfer occurs via a concerted mechanism in which the water molecule participates as an intermediate proton carrier.

08 HYDROGEN↗

Gaseous cyclodextrin- closo -dodecaborate complexes χCD·B 12 X 12 2– (χ = α, β, and γ; X = F, Cl, Br, and I): electronic structures and intramolecular interactions

A fundamental understanding of cyclodextrin- closo -dodecaborate inclusion complexes is of great interest in supramolecular chemistry. Herein, we report a systematic investigation on the electronic structures and intramolecular interactions of perhalogenated closo -dodecaborate dianions B 12 X 12 2– (X = F, Cl, Br and I) binding to α-, β-, and γ-cyclodextrins (CDs) in the gas phase using combined negative ion photoelectron spectroscopy (NIPES) and density functional theory (DFT) calculations. The vertical detachment energy (VDE) of each complex and electronic stabilization of each dianion due to the CD binding (ΔVDE, relative to the corresponding isolated B 12 X 12 2– ) are determined from the experiments along α-, β- and γ-CD in the form of VDE (ΔVDE): 4.00 (2.10), 4.33 (2.43), and 4.30 (2.40) eV in X = F; 4.09 (1.14), 4.64 (1.69), and 4.69 (1.74) eV in X = Cl; 4.11 (0.91), 4.58 (1.38), and 4.70 (1.50) eV in X = Br; and 3.54 (0.74), 3.88 (1.08), and 4.05 (1.25) eV in X = I, respectively. All complexes have significantly higher VDEs than the corresponding isolated dodecaborate dianions with ΔVDE spanning from 0.74 eV at (α, I) to 2.43 eV at (β, F), sensitive to both host CD size and guest substituent X. DFT-optimized complex structures indicate that all B 12 X 12 2– prefer binding to the wide openings of CDs with the insertion depth and binding motif strongly dependent on the CD size and halogen X. Dodecaborate anions with heavy halogens, i.e. , X = Cl, Br, and I, are found outside of α-CD, while B 12 F 12 2– is completely wrapped by γ-CD. Partial embedment of B 12 X 12 2– into CDs is observed for the other complexes via multipronged B–X … H–O/C interlocking patterns. The simulated spectra based on the density of states agree well with those of the experiments and the calculated VDEs well reproduce the experimental trends. Molecular orbital analyses suggest that the spectral features at low binding energies originated from electrons detached from the dodecaborate dianion, while those at higher binding energies are derived from electron detachment from CDs. Energy decomposition analyses reveal that the electrostatic interaction plays a dominating role in contributing to the host–guest interactions for the X = F series partially due to the formation of a O/C–H … X–B hydrogen bonding network, and the dispersion forces gradually become important with the increase of halogen size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolution of the Crystal and Electronic Structures of the RBa{sub 2}Cu{sub 3}O{sub 6 + δ} Cuprates in Annealing

The crystal structure and the magnetic properties of the HTSC cuprates YBa{sub 2}Cu{sub 3}O{sub 6 + δ}, Y{sub 1 ‒} {sub x}Ca{sub x}Ba{sub 2}Cu{sub 3}O{sub 6 + δ}, and Nd{sub 1 +x}Ba{sub 2 –x}Cu{sub 3}O{sub 6 + δ} (x = 0.2) with the structure of a layered perovskite are studied. The well-known aging effect detected in these HTSC materials during storage under standard conditions, namely, an increase in their critical temperature T{sub c} and a decrease in lattice parameter c in time, is investigated. Using YBa{sub 2}Cu{sub 3}O{sub 6 + δ} as an example, we show that the dependence of c on the oxygen content undergoes the following changes in time: (1) the negative slope of the dependence with respect to axis δ increases and (2) nonlinearity appears and grows in time according to a quadratic law. The first type of changes is explained by an increase in the valence of copper ions, which is accompanied by a decrease in their radius. The second type is explained by the electrostatic interaction of structural CuO{sub 2} planes due to the accumulation of electron holes, which come from CuO{sub δ} planes, in them. The calculation of the second type of changes in parameter c in the YBa{sub 2}Cu{sub 3}O{sub 6 + δ} cuprate exhibits good quantitative agreement with the experimental data. The second-type changes in the Y{sub 1 –x}Ca{sub x}Ba{sub 2}Cu{sub 3}O{sub 6 + δ} compound (hole doping of CuO{sub 2} planes) turn out to be identical to those in YBa{sub 2}Cu{sub 3}O{sub 6 + δ}. However, the differently directed (in time) changes in lattice parameter c in Nd{sub 1 +x}Ba{sub 2 –x}Cu{sub 3}O{sub 6 + δ} indicate that the CuO{sub 2} planes in the neodymium cuprate are doped by electrons at the initial stage of aging. However, when these planes are saturated with holes in time, the type of doping changes from n to p without a noticeable change in the crystal structure, which has been considered to be impossible for layered cuprates to date.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanism of the Orotidine 5′-Monophosphate Decarboxylase-Catalyzed Reaction: Evidence for Substrate Destabilization

The reaction catalyzed by orotidine 5'-monophosphate decarboxylase (OMPDC) involves a stabilized anionic intermediate, although the structural basis for the rate acceleration (kcat/knon, 7.1 x 1016) and proficiency (kcat/KM)/knon, 4.8 x 1022 M-1 is uncertain. That the OMPDCs from Methanothermobacter thermautotrophicus (MtOMPDC) and Saccharomyces cerevisiae (ScOMPDC) catalyze the exchange of H6 of the UMP product with solvent deuterium allows an estimate of a lower limit on the rate acceleration associated with stabilization of the intermediate and its flanking transition states (=1010). The origin of the 'missing' contribution, =107 (1017 total - =1010), is of interest. Based on structures of liganded complexes, unfavorable electrostatic interactions between the substrate carboxylate group and a proximal Asp (Asp 70 in MtOMPDC and Asp 91 in ScOMPDC) have been proposed to contribute to the catalytic efficiency. We investigated that hypothesis by structural and functional characterization of the D70N and D70G mutants of MtOMPDC and the D91N mutant of ScOMPDC. The substitutions for Asp 70 in MtOMPDC significantly decrease the value of kcat for decarboxylation of FOMP (a more reactive substrate analogue) but have little effect on the value of kex for exchange of H6 of FUMP with solvent deuterium; the structures of wild-type MtOMPDC and its mutants are superimposable when complexed with 6-azaUMP. In contrast, the D91N mutant of ScOMPDC does not catalyze exchange of H6 of FUMP; the structures of wild-type ScOMPDC and its D91N mutant are not superimposable when complexed with 6-azaUMP, with differences in both the conformation of the active site loop and the orientation of the ligand vis vis the active site residues. We propose that the differential effects of substitutions for Asp 70 of MtOMPDC on decarboxylation and exchange provide additional evidence for a carbanionic intermediate as well as the involvement of Asp 70 in substrate destabilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ligation Kinetics as a Probe for Non-Covalent Electrostatic Bonding and Electron Solvation of Alkali and Alkaline Earth Cations with Ammonia

Mono-ligation kinetics were measured for ammonia reacting with atomic cations in the first two groups of the periodic table (K{sup +}, Rb{sup +}, Cs{sup +} and Ca{sup +}, Sr{sup +}, Ba{sup +}). Also, mono-ligation energies were computed using density functional theory (DFT) in an attempt to assess the role of non-covalent electrostatic interactions in these chemical reactions. The measurements were performed at room temperature in helium bath gas at 0.35 Torr using an inductively coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. Rate coefficients are reported for ammonia addition, the only reaction channel that was observed with all these cations. A systematic decrease in the rate of addition of NH{sub 3} was observed for both group 1 and 2 cations going down the periodic table. The computational studies predict a decrease in the adduct binding energy and an increase in the bond separation going down groups 1 and 2 of the periodic table and provide some insight into the role of the extra selectron in the group 2 radical cations in ligand bonding. A correlation is seen between the efficiency of ligation and the binding energy of the adduct ion and attributed to the lifetime of the intermediate encounter complex against back dissociation which is dependent on its well depth. Higher-order additions of ammonia were also observed. Remarkable differences in the extent and kinetics were seen between the group 1 and 2 cations, and these were attributed to the occurrence of ammonia solvation of the extra s electron in the higher-order adducts of the alkaline earth cations. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Predicting molecular dipole moments by combining atomic partial charges and atomic dipoles

The molecular dipole moment ( μ ) is a central quantity in chemistry. It is essential in predicting infrared and sum-frequency generation spectra as well as induction and long-range electrostatic interactions. Furthermore, it can be extracted directly—via the ground state electron density—from high-level quantum mechanical calculations, making it an ideal target for machine learning (ML). Here, we choose to represent this quantity with a physically inspired ML model that captures two distinct physical effects: local atomic polarization is captured within the symmetry-adapted Gaussian process regression framework which assigns a (vector) dipole moment to each atom, while the movement of charge across the entire molecule is captured by assigning a partial (scalar) charge to each atom. The resulting “MuML” models are fitted together to reproduce molecular μ computed using high-level coupled-cluster theory and density functional theory (DFT) on the QM7b dataset, achieving more accurate results due to the physics-based combination of these complementary terms. The combined model shows excellent transferability when applied to a showcase dataset of larger and more complex molecules, approaching the accuracy of DFT at a small fraction of the computational cost. We also demonstrate that the uncertainty in the predictions can be estimated reliably using a calibrated committee model. The ultimate performance of the models—and the optimal weighting of their combination—depends, however, on the details of the system at hand, with the scalar model being clearly superior when describing large molecules whose dipole is almost entirely generated by charge separation. These observations point to the importance of simultaneously accounting for the local and non-local effects that contribute to μ ; furthermore, they define a challenging task to benchmark future models, particularly those aimed at the description of condensed phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rescoring Docking Hit Lists for Model Cavity Sites: Predictions And Experimental Testing

Molecular docking computationally screens thousands to millions of organic molecules against protein structures, looking for those with complementary fits. Many approximations are made, often resulting in low 'hit rates'. A strategy to overcome these approximations is to rescore top-ranked docked molecules using a better but slower method. One such is afforded by molecular mechanics-generalized Born surface area (MM-GBSA) techniques. These more physically realistic methods have improved models for solvation and electrostatic interactions and conformational change compared to most docking programs. To investigate MM-GBSA rescoring, we re-ranked docking hit lists in three small buried sites: a hydrophobic cavity that binds apolar ligands, a slightly polar cavity that binds aryl and hydrogen-bonding ligands, and an anionic cavity that binds cationic ligands. These sites are simple; consequently, incorrect predictions can be attributed to particular errors in the method, and many likely ligands may actually be tested. In retrospective calculations, MM-GBSA techniques with binding-site minimization better distinguished the known ligands for each cavity from the known decoys compared to the docking calculation alone. This encouraged us to test rescoring prospectively on molecules that ranked poorly by docking but that ranked well when rescored by MM-GBSA. A total of 33 molecules highly ranked by MM-GBSA for the three cavities were tested experimentally. Of these, 23 were observed to bind-these are docking false negatives rescued by rescoring. The 10 remaining molecules are true negatives by docking and false positives by MM-GBSA. X-ray crystal structures were determined for 21 of these 23 molecules. In many cases, the geometry prediction by MM-GBSA improved the initial docking pose and more closely resembled the crystallographic result; yet in several cases, the rescored geometry failed to capture large conformational changes in the protein. Intriguingly, rescoring not only rescued docking false positives, but also introduced several new false positives into the top-ranking molecules. We consider the origins of the successes and failures in MM-GBSA rescoring in these model cavity sites and the prospects for rescoring in biologically relevant targets.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

From Highly Purified Boron Nitride to Boron Nitride-Based Heterostructures: An Inorganic Precursor-Based Strategy

The current approaches used to fabricate hexagonal boron nitrides (h-BN) from boron trioxide and urea always results in contamination of the h-BN product with carbon/oxygen. Thus, discovering a facile way of mass producing high-purity h-BN remains a challenge. A simple yet highly efficient thermal treatment approach to large-scale fabrication of nanoporous h-BN with high yield, high purity, and high crystallinity is described using NaNH 2 and NaBH 4 as the oxygen- and carbon-free precursors. The unique properties of inorganic metal salts, i.e., high melting point and strong electrostatic interaction with carbon substrates, render this strategy suitable for the production of homogeneous h-BN/mesoporous carbon and h-BN/carbon nanotube heterostructures of high crystallinity, high h-BN dispersity, and with a strong interfacial effect. Therefore, these unique features make them promising candidates for supercapacitor applications, resulting a significantly enhanced specific capacitance. This study provides new insight into the fabrication of high-purity h-BN and h-BN-based heterostructures thus expanding their application in the field of energy storage and transformation.

36 MATERIALS SCIENCE↗