Search NASA⌕ Search

SEARCH · Search NASA

Results for “energy efficient computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Advanced Compressors for CO2-Based Power Cycles and Energy

Pumped thermal energy storage (PTES) is a cost-effective method for grid-scale, long-duration electrical energy storage (LDES). PTES uses a heat pump cycle to transfer thermal energy from a low temperature reservoir (LTR) to a high temperature reservoir (HTR), later using a heat engine cycle to reverse the process. A key component of the PTES system, the heat pump compressor, represents a significant driver to the cost, performance and operating characteristics of the PTES system. For grid-scale charging (>100 MW), traditional compressor scaling charts indicate that the operating conditions needed would be best served by a multistage axial compressor. While frame gas turbine compressors at these power ratings exist and operate at higher pressure ratios than needed for the CO2 PTES system, the inlet pressure and fluid density of this application exceed experience values. A conceptual design of a large-scale CO2 axial compressor was completed, including mean-line estimates of the compressor performance at full power conditions. The results of the conceptual design were used to refine the PTES cycle design, and updated operating conditions provided for further aero design optimization. A roughly one third scale of the first three stages of the 100 MW compressor was designed, built, and tested at relevant PTES charging conditions. Results of this test program are compared against high-resolution computational fluid dynamics models.

Compressor Heat↗
DOE OSTI2025

Solving sparse finite element problems on neuromorphic hardware

The finite element method (FEM) is one of the most important and ubiquitous numerical methods for solving partial differential equations (PDEs) on computers for scientific and engineering discovery. Applying the FEM to larger and more detailed scientific models has driven advances in high-performance computing for decades. Here we demonstrate that scalable spiking neuromorphic hardware can directly implement the FEM by constructing a spiking neural network that solves the large, sparse, linear systems of equations at the core of the FEM. We show that for the Poisson equation, a fundamental PDE in science and engineering, our neural circuit achieves meaningful levels of numerical accuracy and close to ideal scaling on modern, inherently parallel and energy-efficient neuromorphic hardware, specifically Intel’s Loihi 2 neuromorphic platform. We illustrate extensions to irregular mesh geometries in both two and three dimensions as well as other PDEs such as linear elasticity. Our spiking neural network is constructed from a recurrent network model of the brain’s motor cortex and, in contrast to black-box deep artificial neural network-based methods for PDEs, directly translates the well-understood and trusted mathematics of the FEM to a natively spiking neuromorphic algorithm.

Applied mathematics↗
DOE OSTI2025

Multidimensional Modeling of Mixture Formation in a Hydrogen-Fueled Heavy-Duty Optical Engine With Direct Injection

Hydrogen (H 2 ), as a carbon-free fuel, is considered as one of the most promising solutions to reduce the carbon footprint of hard-to-decarbonize energy and transportation sectors. As such, hydrogen-fueled internal combustion engines (H 2 ICEs) have recently been receiving increasing attention, particularly in applications such as on-road/off-road heavy-duty transport and combined heat and power. The direct injection (DI) of gaseous hydrogen into the combustion chamber offers great potential for achieving high power density and high engine efficiency, while mitigating the risk of backfire and reducing pre-ignition. However, the numerical simulation of H 2 DI system remains a formidable challenge associated with the high computational cost of reproducing compressible supersonic flow and shocks in narrow injector passages and in near-nozzle regions. In general, there is a lack of well-established and validated practices for the modeling of high-pressure H 2 DI in large-bore engines. Here, to this end, this study focuses on computational fluid dynamics (CFD) modeling of the mixture formation process in a heavy-duty optical engine employing a medium-pressure H 2 DI system. Both large eddy simulations (LES) and Reynolds Averaged Navier–Stokes (RANS) simulations are performed and evaluated against optical data. Gaseous hydrogen is injected into the combustion chamber via a centrally located outward opening hollow-cone injector at a pressure of 40 bar. Simulations are carried out for two injection timings, namely, −120 and −60 °CA. The numerical predictions for H 2 distribution in different horizontal and vertical planes during the compression stroke are systematically compared against optical data obtained through planar laser-induced fluorescence (PLIF) measurements. Overall, the LES approach using the Dynamic Structure model is found to have good predictive capabilities for the early jet penetration in terms of length and shape, as well as the later H 2 distributions. However, the unsteady RANS approach with the renormalization group $k - ϵ$ model, which is widely used by industry to model heavy-duty ICEs, significantly underpredicts the H 2 mixing, even at similar mesh resolution to that used in LES. These results indicate that there is a need for the improvement of mixing submodels within the RANS approach when applied to H 2 DI simulations.

LES↗
DOE OSTI2024

Cybersecurity Considerations for Emerging Energy Technologies

AI, cloud computing, post-quantum cryptography, zero-trust architectures, microgrids, and virtual power plants. What do these things have in common? They are all emerging technologies in the clean energy space that will be a critical part of grid modernization efforts. As we work towards clean energy and decarbonization targets, these technologies, developed to solve real-world problems, will help us reach goals and achieve new efficiencies as the paradigm of grid operation shifts. However, there are growing concerns about the cybersecurity risks associated with these trending topics as they are used in critical infrastructure applications. This talk will cover gaps, challenges, and opportunities for the secure implementation of grid modernization solutions and novel energy applications of state-of-the-art networking and communications. Proactive risk mitigation strategies, including the application of cyber-informed engineering, will be discussed. Practical applications of these techniques will help provide countermeasures to the impact of cyberattacks on critical infrastructure technologies in a new, digitized grid landscape.

14 SOLAR ENERGY↗
DOE OSTI2026

Relativistic Exact Two-Component Theory in the Generalized Pseudospectral Representation

We present a formulation and implementation of exact two-component (X2C) relativistic theory in the generalized pseudospectral representation. When combined with the Hartree-Fock-Slater framework, this approach enables efficient and accurate treatments of scalar-relativistic and spin-orbit effects in atomic electronic structures without the computational overhead of four-component methods. Benchmark calculations across light and heavy elements demonstrate that the our X2C scheme yields substantially more accurate relativistic corrections to core-electron binding energies than perturbational Breit-Pauli treatments while converging more rapidly with respect to basis size. The method provides an improved computational framework for modeling ultrafast x-ray-induced processes in heavy-element systems.

Wang, Xubo↗
DOE OSTI2025

Openpronghorn

OpenPronghorn is a simulation tool specifically tailored for modeling thermal-hydraulic phenomena in advanced nuclear reactors. It is built on the Multiphysics Object-Oriented Simulation Environment (MOOSE), an open-source platform that facilitates the development of high-performance scientific computing applications. OpenPronghorn solves the Navier-Stokes equations, which describe the conservation of mass, momentum, and energy in fluid flows, using the finite volume numerical method. The code supports a wide range of fluid flow conditions that are applicable to nuclear reactors, including incompressible and weakly compressible flows, as well as single-phase and multiphase flows. It is capable of modeling diverse flow regimes, including laminar and turbulent flows, using various turbulence models such as the standard k-epsilon models, the v2f model, and the mixing length model. For multiphase flows, OpenPronghorn employs a mixture a Eulerian modeling approach with mixture, drift-flux, and full Eulerian models, and includes open-sourced interfacial transfer correlations for drag, exchange, and heat transfer coming from the scientific literature. OpenPronghorn's modular design allows it to handle multiscale simulations, ranging from detailed Reynolds-Averaged Navier Stokes (RANS) simulations to coarse-mesh and lumped parameter models. This flexibility enables users to perform high-fidelity simulations of specific reactor components as well as system-level analyses of entire reactor circuits. The code can be coupled with other MOOSE-based tools using the MultiApp system, allowing for the transfer of coupling quantities such as mass flow rates, heat fluxes, and boundary conditions between different simulation scales. One of the main features of OpenPronghorn is the it includes built-in validation cases from the open-source scientific literature and supports the implementation of user-defined models and correlations through MOOSE's FunctorMaterial system. OpenPronghorn is designed to be computationally efficient, leveraging the SIMPLE projection method for large-scale problems, and can be run on high-performance computing systems to handle the extensive computational demands of detailed reactor simulations. Overall, OpenPronghorn is a versatile and robust tool that provides critical insights into the thermal-hydraulic behavior of advanced nuclear reactors, supporting the design, safety, and optimization of next-generation nuclear energy systems.

Retamales, Mauricio Eduardo Tano [Idaho National L↗
DOE OSTI2025

Monocrystalline CdSeTe/MgCdTe Double‐Heterostructure Solar Cells

This article reports monocrystalline CdSeTe/MgCdTe double‐heterostructure (DH) solar cells with varying Se compositions in the absorber layers that are grown on InSb substrates by using molecular beam epitaxy. The Se composition in the samples studied is determined to be 4%–11% through high‐resolution X‐ray diffraction (XRD) and photoluminescence measurements. Increased Se incorporation induces higher defect density attributed to increased lattice mismatch, and mixed‐phase formation due to the small difference in formation energies between the wurtzite and zinc blende phases of CdSe, which causes stacking faults and grain boundaries. Devices are fabricated by directly depositing an n‐type indium tin oxide (ITO) layer on the CdSeTe/MgCdTe DHs followed by Ag metal contacts. Reduced bandgap is observed in solar cells with increased Se composition. The devices with an absorber containing 4% Se exhibit an average open‐circuit voltage ( V OC ) of 0.925 V, a short‐circuit current density ( J SC ) of 23.4 mA/cm 2 , a fill factor ( FF ) of 0.650 and an efficiency of 14.1% without anti‐reflection coating. Absorbers with higher Se compositions result in poor device performance, mainly attributed to high defect density in the materials.

Ju, Zheng [Center for Photonics Innovation Arizona↗
DOE OSTI2024

Computational modeling of phononic pseudocrystal isolators

Methods for the efficient computational prediction of the performance of phononic pseudocrystals (structured materials capable of blocking extraordinary ranges of frequency) in COMSOL and other comparable finite element method codes are set forth. These methods include boundary conditions that make possible halving the size of the computational domain. Also included is an introduction of elastic energy density methods for assessing the extinction of elastic waves within the patterned region.

Swift, Stephen Hales↗
DOE OSTI2026

Beam-water Interaction System for PFAS Treatment

Per- and polyfluoroalkyl substances (PFAS) are persistent environmental contaminants that resist conventional water treatment due to the strength of their carbon fluorine bonds. Electron-beam irradiation has shown potential for PFAS degradation; however, its effectiveness is limited by shallow energy penetration, restricting treatment to the upper region of the water surface. This project addresses this limitation through the design of a compact mixing chamber and recirculation system to enhance surface renewal and improve treatment efficiency. The system, constrained to approximately 10 cm 20 cm 20 cm, was developed using computer-aided design, computational fluid dynamics (CFD), and MATLAB-based hydraulic analysis to evaluate flow behavior, head loss, and pump compatibility. A perforated-baffle geometry and controlled flow range of 1 3 GPM were implemented to promote uniform mixing while maintaining a stable free surface for electron-beam exposure. Modeling results indicate improved flow distribution and reduced dead zones, supporting more consistent interaction between contaminated water and the beam. The final design enhances hydrodynamic performance within system constraints, contributing to scalable electron-beam water treatment technologies for improved PFAS degradation.

Ramos, Gerardo [Northern Illinois U.]↗
DOE OSTI2026

FullWave — A Full Wave Parallel Code for Modeling RF Fields in Hot Tokamak Plasma

FullWave is a computer code that simulates how radio-frequency (RF) waves travel and deposit energy in the hot plasma inside a fusion reactor. RF waves are used to heat the plasma and drive electrical current, which is essential for sustaining fusion reactions. The code uses a new algorithm that can handle much finer spatial detail than previous codes — more than 100 times finer — while running efficiently on national supercomputers. It incorporates a detailed physics model that captures subtle kinetic effects important for accurate prediction of wave behavior. Under this project, FullWave was extended to cover multiple RF frequency ranges relevant to present and future tokamaks, and validated against experimental parameters from the DIII-D tokamak at General Atomics. Results were published in peer-reviewed journal articles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Surrogate modeling and optimization of the leaching process in a rare earth elements recovery plant

Critical minerals (CMs) and Rare Earth Elements (REEs) play a vital role in crucial infrastructure technologies such as renewable energy generation and batteries. Recovering them from waste materials has recently been found to significantly reduce environmental impact and supply chain costs related to these materials. In this work, we investigate surrogate modeling techniques aimed to simplify the modeling, simulation, and optimization of the leaching processes involved in CM and REE recovery flowsheets. As there is currently a lack of systematic studies on this topic, we perform extensive computational testing to ascertain which surrogate models are easier to construct and offer high predictive accuracy. Further, our results suggest that sparse quadratic models balance predictive accuracy and computational efficiency. Training and using these surrogates for global optimization of the leaching process requires two orders of magnitude fewer measurements and is up to four orders of magnitude faster than optimizing the original simulation using equation-oriented optimization or derivative-free optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Programmable simulations of molecules and materials with reconfigurable quantum processors

Simulations of quantum chemistry and quantum materials are believed to be among the most important applications of quantum information processors. However, realizing practical quantum advantage for such problems is challenging because of the prohibitive computational cost of programming typical problems into quantum hardware. Here we introduce a simulation framework for strongly correlated quantum systems represented by model spin Hamiltonians that uses reconfigurable qubit architectures to simulate real-time dynamics in a programmable way. Our approach also introduces an algorithm for extracting chemically relevant spectral properties via classical co-processing of quantum measurement results. We develop a digital–analogue simulation toolbox for efficient Hamiltonian time evolution using digital Floquet engineering and hardware-optimized multi-qubit operations to accurately realize complex spin–spin interactions. As an example, we propose an implementation based on Rydberg atom arrays. In addition, we show how detailed spectral information can be extracted from the dynamics through snapshot measurements and single-ancilla control, enabling the evaluation of excitation energies and finite-temperature susceptibilities from a single dataset. To illustrate the approach, we show how to use the method to compute key properties of a polynuclear transition-metal catalyst and two-dimensional magnetic materials.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Combustion-Pele: An Exascale Capability for Improving Engine Design

Combustion, the complex chemical reaction made possible by igniting a mixture of fuel and oxygen to produce heat and light, serves as the nation’s primary source of power generation and the linchpin of the transportation industry. For more than 100 years, internal combustion engines (ICEs) have been converting energy from the burning of fuel—gasoline, for example—into a mechanical process that makes vehicles move. Recently, ICEs have come under heavy scrutiny for their contribution to greenhouse gas emissions, yet combustion-based systems are projected to dominate the marketplace for decades. Exascale systems are helping researchers design new high-efficiency, low-emission combustion engines that operate at much lower temperatures to maintain the nation’s energy security and limit negative environmental impacts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

MEP Core Tools

This slide deck provides an update on the progress of the project titled "MEP Core Tools" funded by the Energy Efficient Mobility Systems program in the Vehicle Technologies Office at the Department of Energy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

SPECTER: efficient evaluation of the spectral EMD

The Energy Mover’s Distance (EMD) has seen use in collider physics as a metric between events and as a geometric method of defining infrared and collinear safe observables. Recently, the Spectral Energy Mover’s Distance (SEMD) has been proposed as a more analytically tractable alternative to the EMD. In this work, we obtain a closed-form expression for the Riemannian-like p = 2 SEMD metric between events, eliminating the need to numerically solve an optimal transport problem. Additionally, we show how the SEMD can be used to define event and jet shape observables by minimizing the distance between events and parameterized energy flows (similar to the EMD), and we obtain closed-form expressions for several of these observables. We also present the Specter framework, an efficient and highly parallelized implementation of the SEMD metric and SEMD-derived shape observables as an analogue of the previously-introduced Shaper for EMD-based computations. We demonstrate that computing the SEMD with Specter can be up to a thousand times faster than computing the EMD with standard optimal transport libraries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Monte Carlo Event Generation with Continuous Normalizing Flows

We apply continuous normalizing flows trained with the flow matching method to the problem of phase-space sampling in Monte Carlo event generation for high-energy collider physics. Focusing on lepton-pair and top-quark pair production with multiple jets, the two computationally most expensive processes at the Large Hadron Collider, we train helicity-conditioned continuous normalizing flows to remap the random numbers used in matrix element evaluation. Compared to standard methods, we achieve unweighting efficiency improvements by factors of up to 184 and 25 for the two processes at their respective highest jet number, at the cost of an increased evaluation time. When combining the advantages of continuous normalizing flows with the fast evaluation times of coupling-layer-based flows, using the RegFlow approach, we find parton-level unweighted event generation walltime gains of about a factor of 10 at the highest jet numbers. These substantial gains highlight the promise of samplers based on machine learning for next-generation collider experiments.

Bothmann, Enrico [CERN; Gottingen U.] (ORCID:00000↗
DOE OSTI2025

A generalized and adaptable tensor-contraction-based cluster expansion formalism for multicomponent solids

Density functional theory (DFT)-based simulations of materials have first-principles accuracy, but are very computationally expensive. For simulating various properties of multi-component alloys, the cluster expansion (CE) technique has served as the standard workaround to improve computational efficiency. However, the standard CE technique is difficult to extend to exotic and/or low-symmetry lattices, often implemented via iteration over particular cluster types, which must be enumerated per lattice structure. In this work, we introduce the tensor cluster expansion (TCE), implemented in the open-source code tce-lib, which maps correlation functions to mixed tensor contractions, eliminating the need to iterate over cluster types and additionally making the calculation of correlation functions well-suited for massively parallel architectures like GPUs. We show that local interaction energies are an immediate consequence of the TCE formalism, yielding nearly $\mathcal{O}$(1) energy difference calculations. We then use this formalism to fit CE models for the TaW and CoNiCrFeMn systems, and use these models to respectively compute the enthalpy of mixing curve and Cowley short-range order parameters, showing excellent agreement with ground truth data.

Cluster expansion↗
DOE OSTI2024

GPU-enabled extreme-scale turbulence simulations: Fourier pseudo-spectral algorithms at the exascale using OpenMP offloading

Fourier pseudo-spectral methods for nonlinear partial differential equations are of wide interest in many areas of advanced computational science, including direct numerical simulation of three-dimensional (3-D) turbulence governed by the Navier-Stokes equations in fluid dynamics. This paper presents a new capability for simulating turbulence at a new record resolution up to 35 trillion grid points, on the world's first exascale computer, Frontier, comprising AMD MI250x GPUs with HPE's Slingshot interconnect and operated by the US Department of Energy's Oak Ridge Leadership Computing Facility (OLCF). Key programming strategies designed to take maximum advantage of the machine architecture involve performing almost all computations on the GPU which has the same memory capacity as the CPU, performing all-to-all communication among sets of parallel processes directly on the GPU, and targeting GPUs efficiently using OpenMP offloading for intensive number-crunching including 1-D Fast Fourier Transforms (FFT) performed using AMD ROCm library calls. With 99% of computing power on Frontier being on the GPU, leaving the CPU idle leads to a net performance gain via avoiding the overhead of data movement between host and device except when needed for some I/O purposes. Memory footprint including the size of communication buffers for MPI_ALLTOALL is managed carefully to maximize the largest problem size possible for a given node count. Detailed performance data including separate contributions from different categories of operations to the elapsed wall time per step are reported for five grid resolutions, from 2048 3 on a single node to 32768 3 on 4096 or 8192 nodes out of 9408 on the system. Both 1D and 2D domain decompositions which divide a 3D periodic domain into slabs and pencils respectively are implemented. The present code suite (labeled by the acronym GESTS, GPUs for Extreme Scale Turbulence Simulations) achieves a figure of merit (in grid points per second) exceeding goals set in the Center for Accelerated Application Readiness (CAAR) program for Frontier. The performance attained is highly favorable in both weak scaling and strong scaling, with notable departures only for 2048 3 where communication is entirely intra-node, and for 32768 3 , where a challenge due to small message sizes does arise. Communication performance is addressed further using a lightweight test code that performs all-to-all communication in a manner matching the full turbulence simulation code. Performance at large problem sizes is affected by both small message size due to high node counts as well as dragonfly network topology features on the machine, but is consistent with official expectations of sustained performance on Frontier. Overall, although not perfect, the scalability achieved at the extreme problem size of 32768 3 (and up to 8192 nodes — which corresponds to hardware rated at just under 1 exaflop/sec of theoretical peak computational performance) is arguably better than the scalability observed using prior state-of-the-art algorithms on Frontier's predecessor machine (Summit) at OLCF. New science results for the study of intermittency in turbulence enabled by this code and its extensions are to be reported separately in the near future.

3D fast Fourier transform↗