Search NASA⌕ Search

SEARCH · Search NASA

Results for “fusion reactors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

The dual-electron cyclotron emission based measurement of 3D structures on DIII-D tokamak

The measurements of the locked mode and other 3D magnetohydrodynamic modes are essential for real-time control of plasma stability in future fusion reactors. Current magnetic measurements present non-negligible challenges for the application on fusion pilot plants (FPPs) due to neutron radiation and pose challenging design issues. In this paper, we discuss an alternative solution with microwave-based measurements. The dual-electron cyclotron emission (ECE) method has been developed and applied on DIII-D. The dual-ECE measurement method demonstrates clear identification of magnetic islands compared to single ECE, which is highly beneficial for locked mode feedback control on the FPPs. Toroidally separated ECE measurements provide accurate three-dimensional structure of magnetic islands and tearing modes. This technique also offers deeper physical insights into the penetration of resonant magnetic perturbations. Numerical calculations indicate that small locked modes (magnetic island width > 2 cm) can be detected using the dual-ECE measurement method in ITER plasma. This will enhance measurement capabilities for the safe operation of FPP plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calibration of RAFM Micromechanical Model for Creep Using Bayesian Optimization for Functional Output

A Bayesian optimization procedure is presented for calibrating a multimechanism micromechanical model for creep to experimental data of F82H steel. Reduced activation ferritic martensitic (RAFM) steels based on Fe(8–9)%Cr are the most promising candidates for some fusion reactor structures. Although there are indications that RAFM steel could be viable for fusion applications at temperatures up to 600°C, the maximum operating temperature will be determined by the creep properties of the structural material and the breeder material compatibility with the structural material. Due to the relative paucity of available creep data on F82H steel compared to other alloys such as Grade 91 steel, micromechanical models are sought for simulating creep based on relevant deformation mechanisms. As a point of departure, this work recalibrates a model form that was previously proposed for Grade 91 steel to match creep curves for F82H steel. Due to the large number of parameters (9) and cost of the nonlinear simulations, an automated approach for tuning the parameters is pursued using a recently developed Bayesian optimization for functional output (BOFO) framework (Huang et al., 2021, “Bayesian optimization of functional output in inverse problems,” Optim. Eng., 22, pp. 2553–2574). Incorporating extensions such as batch sequencing and weighted experimental load cases into BOFO, a reasonably small error between experimental and simulated creep curves at two load levels is achieved in a reasonable number of iterations. In conclusion, validation with an additional creep curve provides confidence in the fitted parameters obtained from the automated calibration procedure to describe the creep behavior of F82H steel.

42 ENGINEERING↗

Liquid Metals as Plasma-facing Materials for Fusion Energy Systems: From Atoms to Tokamaks

The objective of our studies was to advance our fundamental understanding of liquid metals as plasma-facing materials for fusion energy systems, with a broad scope: from atoms to tokamaks. The flow of liquid metals offers solutions to significant problems of the plasma-facing materials for fusion energy systems. Candidate metals include lithium, tin, gallium, and their eutectic combinations. However, such liquid metal solutions can only be designed efficiently if a range of scientific and engineering issues are resolved that require advances in fundamental fluid dynamics, materials science and surface science. In our research we investigated a range of significant and timely problems relevant to current and proposed engineering designs for fusion reactors, including high-heat flux configurations that are being considered by leading fusion energy groups world-wide. Using experimental and theoretical tools spanning atomistic to continuum descriptions of liquid metals, and bridging surface chemistry, wetting/dewetting and flow, our research has advanced the science and engineering of fusion energy materials and systems. Specifically, we developed a combined experimental and theoretical program to investigate flows of liquid metals in fusion-relevant geometries, including equilibrium and stability of thin-film flows, e.g. wetting and dewetting, effects of electromagnetic and thermocapillary fields on liquid metal thin-film flows, and how chemical interactions and the properties of the surface are influenced by impurities and in turn affect the surface wetting characteristics, the surface tension, and its gradients. Because high-heat flux configurations produce evaporation and sputtering, which forces rearrangement of the liquid, and any dewetting exposes the substrate to damage from the plasma, our studies addressed such evaporatively driven liquid flows and measured and simulated properties of the different bulk phases and material interfaces. The range of our studies included (i) quantum mechanical calculations that allow inclusion of many thousands of atoms for the characterization of the interface of liquid metals exposed to continuous bombardment by deuterium and tritium as expected in fusion, (ii) molecular dynamics studies of the phase behavior of liquid metals, which (a) utilize thermodynamic properties computed using our quantum mechanical calculations and (b) establish material and wetting properties of the liquid metals, including relevant eutectics, (iii) experimental investigations of the surface science of liquid metals, interacting both with the solid substrate as well as gaseous species, and (iv) fluid dynamical studies that incorporate the material and surface science results of (ii) and (iii) in order to characterize flow in capillary porous materials and the thin-film flow along curved boundaries, both of which are potentially major components of plasma-facing materials. The outcome of these integrated studies was new understanding that enables developing design rules useful for future developments of the plasma-facing components critical to the success of fusion energy systems.

36 MATERIALS SCIENCE↗

Applications of fuzzy logic and best-worst method for tritium sensor selection

Accurate assessment of tritium as a fuel source is critical in fusion reactions, necessitating effective sensor evaluation methods. This study investigates a multi-criteria decision-making framework for selecting tritium sensors, integrating fuzzy logic to enhance decision quality. Initial attempts at applying fuzzy logic were found to be too elementary and failed to capture the complexity of multi-criteria selection; this prompted a refined approach that incorporated expert insights and advanced ranking techniques for sensor evaluation. The research used a two-stage methodology. In the first stage, important criteria and sub-criteria for sensor performance were identified and defined. These criteria were then weighted and scored using a fuzzy best-worst method, drawing upon expert opinions to ensure relevance and validity. The second stage involved interpreting information about varying sensors to rank them based on their overall criteria scores, encouraging the selection of the most suitable options. The result of the study is a proposed method for effective sensor selection in fusion reactors, which in turn will significantly improve the reliability of tritium monitoring in fusion applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling of Stress and Temperature Effects on Creep of Reduced Activation Ferritic-Martensitic Steel Alloy F82H (Tertiary Creep Modeling of RAFM Steel)

A Bayesian optimization procedure is presented for calibrating a multi-mechanism micromechanical model for creep to experimental data of F82H steel. Reduced activation ferritic martensitic (RAFM) steels based on are the most promising candidates for some fusion reactor structures. Although there are indications that RAFM steel could be viable for fusion applications at temperatures up to 600 °C, the maximum operating temperature will be determined by the creep properties of the structural material and the breeder material compatibility with the structural material. Due to the relative paucity of available creep data on F82H steel compared to other alloys such as Grade 91 steel, micromechanical models are sought for simulating creep based on relevant deformation mechanisms. As a point of departure, this work recalibrates a model form that was previously proposed for Grade 91 steel to match creep curves for F82H steel. Due to the large number of parameters (9) and cost of the nonlinear simulations, an automated approach for tuning the parameters is pursued using a recently developed Bayesian optimization for functional output (BOFO) framework [1]. Incorporating extensions such as batch sequencing and weighted experimental load cases into BOFO, a reasonably small error between experimental and simulated creep curves at two load levels is achieved in a reasonable number of iterations. Validation with an additional creep curve provides confidence in the fitted parameters obtained from the automated calibration procedure to describe the creep behavior of F82H steel at 600 °C. The model is further extended using a temperature dependent scaling law approach to simulate creep response between 550 °C and 650 °C. The efficacy of this extension is compared with the previously used scaling law approach for Grade 91 steel.

36 MATERIALS SCIENCE↗

Lunar He-3, fusion propulsion, and space development

The recent identification of a substantial lunar resource of the fusion energy fuel He-3 may provide the first terrestrial market for a lunar commodity and, therefore, a major impetus to lunar development. The impact of this resource-when burned in D-He-3 fusion reactors for space power and propulsion-may be even more significant as an enabling technology for safe, efficient exploration and development of space. One possible reactor configuration among several options, the tandem mirror, illustrates the potential advantages of fusion propulsion. The most important advantage is the ability to provide either fast, piloted vessels or high-payload-fraction cargo vessels due to a range of specific impulses from 50 sec to 1,000,000 sec at thrust-to-weight ratios from 0.1 to 5x10(exp -5). Fusion power research has made steady, impressive progress. It is plausible, and even probable, that fusion rockets similar to the designs presented here will be available in the early part of the twenty-first century, enabling a major expansion of human presence into the solar system.

Santarius, John F.↗

MYRRHA a multi-purpose hybrid research reactor for high-tech applications

MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) is the flexible experimental accelerator driven system (ADS) in development at SCK-CEN. MYRRHA is able to work both in subcritical (ADS) as in critical mode. In this way, MYRRHA will allow fuel developments for innovative reactor systems, material developments for generation IV (GEN IV) systems, material developments for fusion reactors, radioisotope production and industrial applications, such as Si-doping. MYRRHA will also demonstrate the ADS full concept by coupling the three components (accelerator, spallation target and subcritical reactor) at reasonable power level to allow operation feedback, scalable to an industrial demonstrator and allow the study of efficient transmutation of high-level nuclear waste. MYRRHA is based on the heavy liquid metal technology and so it will contribute to the development of lead fast reactor (LFR) technology and in critical mode, MYRRHA will play the role of European technology pilot plant in the roadmap for LFR. In this paper the historical evolution of MYRRHA and the rationale behind the design choices is presented and the latest configuration of the reactor core and primary system is described. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Thermodynamic assessment of the quaternary WTaCrV refractory high entropy alloy as a means to guide experimental approaches

The deployment of fusion energy poses challenges for materials in plasma facing components to withstand high temperatures and thermal gradients, particle implantation and neutron damage. The current material of choice is tungsten, although property degradation limits its consideration in future fusion reactors. Hence, materials with better resistance to harsh environments need to be developed for fusion energy to become a reality. High entropy alloys are being explored as potential candidates with some compositions showing good radiation resistance to defect cluster formation. One of these materials is the WTaCrV system, although only one composition has been tested under ion irradiation. In this work, we study the thermodynamic properties of the entire quaternary alloy composition range. Coupling first principles calculations, cluster expansion approaches, and Monte Carlo methods, we access the free energy functionals, short-range ordering as a function of temperature, and atomic configurations that can be compared to experimental observations. We use this data to inform experiments into compositions with higher propensity to form solid solutions, instead of phase separating. With this formalism we have developed thermodynamic database (TDB) files that can be used to plot quaternary phase diagrams.

Cluster Expansion↗

Behavior of tritium permeation induced by water corrosion of alpha iron around room temperature

Tritium (T) permeation leakage to surroundings is a great safety concern in fission and fusion reactor systems. T permeation potentially occurs from T contaminated water through cooling tubes or storage tank made of metals which dissolve some T evolved by water corrosion. In order to understand behaviors of hydrogen uptake and permeation in pure α-iron (αFe) during water corrosion around room temperature, hydrogen permeation experiments for an αFe membrane have been conducted by means of tritium tracer techniques. The present study suggests that hydrogen produced by water corrosion of αFe is trapped in product oxide layers to delay hydrogen uptake in αFe for a moment. However, the oxide layers do not work as a sufficient barrier for hydrogen uptake. Some of hydrogen dissolved in αFe normally diffuses and permeates through the bulk in the early stage of permeation. In a later stage, hydrogen permeation could be apparently stopped by the disappearance of concentration difference of tritium. Hydrogen partial pressure at the water/αFe interface could be ranged from 0.7 to 9.5 kPa around room temperature.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Quantum phase estimation for a class of generalized eigenvalue problems

Quantum phase estimation provides a path to quantum computation of solutions to Hermitian eigenvalue problems Hv = λv , such as those occurring in quantum chemistry. It is natural to ask whether the same technique can be applied to generalized eigenvalue problems Av = λBv , which arise in many areas of science and engineering. Here, we answer this question affirmatively. A restricted class of generalized eigenvalue problems could be solved as efficiently as standard eigenvalue problems. A paradigmatic example is provided by Sturm-Liouville problems. Another example comes from linear ideal magnetohydrodynamics, where phase estimation could be used to determine the stability of magnetically confined plasmas in fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

HYPERELASTIC MODELS FOR GRANULAR MATERIALS

A continuum framework for modeling of dust mobilization and transport, and the behavior of granular systems in general, has been reviewed, developed and evaluated for reactor design applications. The large quantities of micron-sized particles expected in the international fusion reactor design, ITER, will accumulate into piles and layers on surfaces, which are large relative to the individual particle size; thus, particle-particle, rather than particle-surface, interactions will determine the behavior of the material in bulk, and a continuum approach is necessary and justified in treating the phenomena of interest; e.g., particle resuspension and transport. The various constitutive relations that characterize these solid particle interactions in dense granular flows have been discussed previously, but prior to mobilization their behavior is not even fluid. Even in the absence of adhesive forces between particles, dust or sand piles can exist in static equilibrium under gravity and other forces, e.g., fluid shear. Their behavior is understood to be elastic, though not linear. The recent “granular elasticity” theory proposes a non-linear elastic model based on “Hertz contacts” between particles; the theory identifies the Coulomb yield condition as a requirement for thermodynamic stability, and has successfully reproduced experimental results for stress distributions in sand piles. The granular elasticity theory is developed and implemented in a stand- alone model and then implemented as part of a finite element model, ABAQUS, to determine the stress distributions in dust piles subjected to shear by a fluid flow. We identify yield with the onset of mobilization, and establish, for a given dust pile and flow geometry, the threshold pressure (force) conditions on the surface due to flow required to initiate it. While the granular elasticity theory applies strictly to cohesionless granular materials, attractive forces are clearly important in the interaction of micron-sized particles; extension of the theory to account for these effects is also considered. A set of continuum models are proposed for use in the future dust transport modeling.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

SOFE2023 Presentation: "Tritium Safety and Sensitivity Analysis of Tritium Extraction eXperiment (TEX) PbLi Loop Using MELCOR-TMAP"

The efficient extraction of tritium from the breeder blanket (BB) in a fusion reactor is vital for maintaining the tritium economy for a sustainable and self-sufficient fusion power plant. The vacuum permeator (VP) design is one of several promising technology platforms for extracting tritium from the BB with the advantages of being capable of operating continuously at high temperatures with the aim of achieving high tritium extraction efficiencies. The Tritium Extraction eXperiment (TEX), under construction at the Safety and Tritium Applied Research (STAR) Facility at Idaho National Laboratory (INL), is designed to test the viability of VP technology by introducing atomic hydrogen (H, D, and T) from a source permeator (SP) into a forced convection lead lithium eutectic (PbLi) loop and determining the hydrogen extraction rates from the vanadium VP. Presented here is a computational analysis of the hydrogen inventory and permeation behavior in TEX using the hydrogen transport and accident analysis code MELCOR-TMAP developed at INL. The results of a sensitivity analysis based on MELCOR-TMAP simulations of hydrogen extraction efficiencies from the TEX test section using varying PbLi flow rates, hydrogen source rates from the SP, and material property uncertainties are also reported. Operation scenarios for TEX in consideration of the analyses based on results from MELCOR-TMAP are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Positron Annihilation Spectroscopy Investigation of Vacancy Clusters in Neutron-Irradiated 3C-SiC

Silicon carbide (SiC) has been widely applied or considered in nuclear systems as fuel and structural materials since 1960's, given its high-temperature stability, chemical inertness, and exceptional irradiation resistance. Chemically vapor deposited (CVD) SiC has been considered as the pressure vessel materials for the TRISO fuel particles used in high temperature gas-cooled reactors or novel accident tolerant fuel concepts for light water reactors. The use of SiC/SiC composites as primary structural materials has also been proposed in fusion reactors. Driven by the need to enlarge the safety margins of nuclear reactors in accident scenarios, R and D of accident-tolerant fuel has become an important topic in the nuclear engineering and materials community. A continuous fiber SiC/SiC composite is under consideration for Zr alloy cladding replacement. Microstructural development and mechanical property change in SiC subject to neutron and ion irradiation have been studied extensively and understood well. However, the information of small vacancy cluster (i.e., those invisible in TEM) evolution in SiC exposed to neutron irradiation is still lacking, and such small clusters is suspected to play an important role in swelling, radiation creep, and thermal conductivity degradation. In this study, positron annihilation spectroscopy is used to characterize the vacancy defects in 3C-SiC exposed to various neutron irradiation conditions to capture the dependence of temperature and irradiation dose. The obtained vacancy cluster distribution is then linked to the measured swelling behavior to provide insight into the relationship between microstructure and physical property of SiC. (authors)

36 MATERIALS SCIENCE↗

Analysis of the linear and nonlinear stability of Alfven eigenmodes and fish-bones in JET DT discharges: mode identification and shear flows generation

The plasma in future nuclear fusion reactors will be heated by neutral beam injectors (NBIs) and high frequency electromagnetic waves as well as fusion born alpha particles. Energetic particles (EPs), with energies up to two orders of magnitude larger than the thermal plasma, can trigger EP driven modes and induce harmful EP losses, reducing the plasma heating efficiency and the economical viability of the reactor. The present study is dedicated to analyze the Alfven Eigenmode (AE) activity in JET D–T discharges, the closest experiment to reactor-like operation performed until now. There, EP driven modes are induced by the combined effect of tangential NBIs and ion cyclotron resonance heating (ICRH) driven EP. Linear and nonlinear simulations are performed with the gyro-fluid FAR3d code to analyze the AE activity observed in the discharge 99896. The linear simulations reproduce the unstable n = 3 to 5 toroidal AEs (TAE) at the inner plasma region observed in the experiment, triggered by highly energetic passing deuterium populations injected by the tangential NBIs, further accelerated by the effect of the ICRH up to 1 MeV. In addition, fish-bones triggered by energetic trapped hydrogen induced by the ICRH are also reproduced. On the other hand, the alpha particles density is too small to destabilize AEs in the experiment. Nonetheless, increasing artificially the alpha density by one order of magnitude, an n = 1 beta induced AE can be destabilized in the inner plasma region. Nonlinear simulations indicate the generation of zonal structures during the AE/fish-bone saturation phase. TAE and fish-bones causes a rather weak increase of the passing D and trapped H EP (around 2%), respectively. Shear flows and zonal currents are generated during the saturation of TAE and fish-bones. Nonlinear simulations performed for D–T and pure deuterium thermal plasma indicate AE/fish-bone activity is weaker and shear flows are less intense in the pure deuterium case, trends consistent with the experimental observations that also indicates a deterioration of the thermal plasma confinement. Therefore, both numerical studies and experimental evidence indicate the generation of shear flows by AE/fish-bones could be connected with an improvement of the thermal plasma confinement.

AE↗

Development of Fusion Neutronics Methodology, Software, and Testing Facility in FDS Team

Fusion neutronics including methodology, software, experiments, etc. is studied concerning the generation, utilizing and protection of neutrons in fusion facilities. Achievements have been made in the past decades to solve the new problems fusion neutronics. However there is still some way to go such as following. Automatic modeling method based on CAD has been developed to avoid the heavy burden of manual geometry description. The pre-processing costs much time to simplify the CAD model for converting to Constructive Solid Geometry (CSG), 2D or 3D mesh based geometry. This problem has become a new focus. Deep penetration of radiation shielding is notable problem for fusion. Adaptive variance reduction methods such as Consistent Adjoint Driven Importance Sampling (CADIS) were developed to accelerate convergence. However the gap still exists between engineering requirements and current methodology. The geometry simplification, homogenizing based tally, error in nuclear data and error propagation in coupled calculation, etc., causes considerable uncertainty, which leads to 'safety factor' applied in simulation results to achieve required safety margin. It can significantly raise the cost and even makes it impractical to initiate the fusion facilities. Uncertainty qualification, error analysis and error propagation problem should be studied. New methodology and software should be validated. For example the (n,p), (n,a), (n,t) cross section of Cu, Fe, W, Ni which is important for evaluation of material radiation damage is absent. The validation of neutronics properties of special components such as first wall, blanket and coil are needed. The D-T fusion neutron generator can directly represent the neutron environment in fusion reactors. However the neutron yield is several orders of magnitudes lower than requirements. To resolve obstacles in fusion neutronics, broad improvements of methodology, software and testing facility have been achieved by FDS Team in recent years and the main progress was introduced in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Informing ARC divertor design and plasma facing material selection through integrated modeling

This INFUSE 2023 project between UCLA and Commonwealth Fusion Systems used computer modeling to test whether tungsten materials can survive in CFS's ARC fusion reactor divertor. The team simulated plasma conditions and material responses, finding that tungsten-rhenium alloys resist grain growth better than pure tungsten, and that hydrogen buildup depends more on particle flux than temperature. The work helps CFS design durable plasma-facing components for their fusion power plant.

36 MATERIALS SCIENCE↗

On the origin of ‘fuzz’ formation in plasma-facing materials

Tungsten, the material used in the plasma-facing components (PFCs) of nuclear fusion reactors, develops a fuzz-like surface morphology under typical reactor operating conditions. This fragile 'fuzz' surface nanostructure adversely affects reactor performance and operation. Developing predictive models, capable of simulating the spatiotemporal scales relevant to the fuzz formation process is essential for understanding the growth of such extremely complex surface features and improving PFC and reactor performance. Here, we report the development of an atomistically-informed, continuous-domain model for the onset of fuzz formation in helium plasma-irradiated tungsten and validate the model by comparing its predictions with measurements from carefully designed experiments. Our study demonstrates that fuzz forms in response to stress induced in the near-surface region of PFCs as a result of plasma exposure and helium gas implantation. In conclusion, our model sets the stage for detailed descriptions of this complex fuzz formation phenomenon and similar phenomena observed in other materials.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Surface stability and H adsorption and diffusion near surfaces of W borides: a first-principles study

Abstract Understanding the behavior of tungsten boride (W x B y ) surfaces in a fusion reactor environment is an important topic since boronization is a common wall conditioning method used in fusion Tokamaks. We report the results of density functional theory calculations that investigate the surface stability of W x B y (tetragonal I4 1 /amd -WB, hexagonal P 6 3 / mmc -WB 2 and tetragonal I4/m- W 2 B) with low-index orientations, as well as hydrogen (H) energetics near W x B y surfaces. For single element terminated W x B y surfaces, B terminated surfaces are more energetically stable than W terminated as a result of significant reconstruction of B. The H surface adsorption energy and activation energy of H diffusion penetration below W x B y surfaces are mainly related to the outer termination. Specifically, the WB(001) surface terminated with two B layers, referred to as WB(001)-T BB , has higher H adsorption affinity and lower H diffusivity on this surface than other terminations, which is controlled by the significant charge transfer from B to H. However, B atoms on the WB 2 (0001)-T BB surface decrease both H adsorption and diffusivity on the surface, but enhance H diffusion below the surface in comparison to W terminated WB 2 (0001) surface. H would be trapped and diffuse within atomic surface gaps on the WB 2 ( 2 1 ˉ 1 ˉ 0 ) surface, while H below the surface layer would jump along the [0001] direction rather than diffuse into bulk. The surface diffusion activation energy of H on the W 2 B(001) surface slightly varies with terminations. Once H crosses the surface layer of W 2 B(001) with either termination, it prefers to diffuse into the bulk, or back towards the surface, rather than move parallel to the surface. Interestingly, WB 2 (0001) and WB 2 ( 2 1 ˉ 1 ˉ 0 ) surfaces will have relatively higher H retention than the other W x B y surfaces evaluated in this work.

Yang, L. (ORCID:0000000322166071)↗