Search NASA⌕ Search

SEARCH · Search NASA

Results for “gap analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

What can surface wind observations tell us about interannual variation in wind energy output?

The past decade of wind power growth was supported by capacity factor improvements and associated cost reductions. But are higher capacity factors a technology success story or, as suggested by recent research, has the influence of technology been overstated by ignoring positive surface wind speed trends? The answer could influence estimates of wind energy's cost and even future deployment rates. We find that US surface wind speed observations imply a 2.6% improvement in capacity factors from 2010 to 2019. Yet newer vintages of wind plants have recorded capacity factors that are ~25% larger than plants built close to 2010. It follows that technological factors and improved site quality, not higher wind speeds, drove most of the improvement in capacity factors. Additionally, we match hundreds of meteorological stations to nearby (< 25 km) wind plants and compare annual estimated generation, based on a function of surface wind speed observations, to annual recorded generation. Researchers rely on this publicly available surface data because measurements co-located with wind plants are generally considered proprietary. Our analysis addresses a research gap: interannual variation in observed surface wind speeds is rarely compared to observed data at wind plant locations and turbine heights. We find that despite its common use for this purpose, generation estimates based on publicly available surface observational data provide a poor proxy for interannual variability in recorded wind generation. These findings suggest that caution is generally needed when researchers use surface wind speed measurements to investigate long-term wind energy trends.

17 WIND ENERGY↗

AdS bulk locality from sharp CFT bounds

It is a long-standing conjecture that any CFT with a large central charge and a large gap Δ gap in the spectrum of higher-spin single-trace operators must be dual to a local effective field theory in AdS. We prove a sharp form of this conjecture by deriving numerical bounds on bulk Wilson coefficients in terms of Δ gap using the conformal bootstrap. Our bounds exhibit the scaling in Δ gap expected from dimensional analysis in the bulk. Our main tools are dispersive sum rules that provide a dictionary between CFT dispersion relations and S-matrix dispersion relations in appropriate limits. This dictionary allows us to apply recently-developed flat-space methods to construct positive CFT functionals. We show how AdS 4 naturally resolves the infrared divergences present in 4D flat-space bounds. Our results imply the validity of twice-subtracted dispersion relations for any S-matrix arising from the flat-space limit of AdS/CFT.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The role of social support on midwestern farmers’ willingness to grow perennial bioenergy crops

The lack of farmers' willingness to grow perennial bioenergy crops (PBCs) presents a critical barrier to the emergence of cellulosic biofuel production. The willingness relies on a complex network of economic, environmental, and social drivers, among which the influence of social factors (e.g., the influence of neighborhood, community, and communication) is less understood. This study addresses this knowledge gap via a survey analysis of midwestern farmers. The survey data are analyzed through ordinary least square regression and structural equation model, which together investigate the individual and interactive impacts of multiple factors on farmers' decisions to adopt PBCs. Based on a farm-scale analysis, six statistically significant predictors of farmer willingness to grow PBCs are identified: perception of PBCs' environment benefits, education level, willingness to take risks, familiarity with PBCs, portion of peers already growing PBCs, and support of biorefineries locating in the local community. Among these, the latter three predictors are social support variables. It is found that familiarity with the crops is the most significant predictor of willingness; familiarity is also an important intermediate variable that mediates the influence of many other predictors. In addition, peer adoption can both directly and indirectly affect willingness via its influence on familiarity. Furthermore, these findings suggest that it is a pressing need to improve farmers’ knowledge of PBCs to promote the adoption of such crops.

09 BIOMASS FUELS↗

Operation and performance of VRF systems: Mining a large-scale dataset

The energy consumption of air-conditioning systems has gained increasing attention as it contributes significantly to the global building energy use. The variable refrigerant flow (VRF) system is a common air-conditioning system applied widely in residential and office buildings in China. Understanding the actual operation and performance of VRF systems is fundamental for the energy-efficient design and operation of VRF systems. Previous research on VRF system operation used either limited field data covering certain building types and climate zones or used a questionnaire to obtain a larger dataset. However, they did not capture the wide applications of VRF systems quantitatively across all building types, climate zones, and operating conditions. To fill this gap, statistical and clustering analysis was conducted on the newly proposed key performance indicators of approximately 287,000 VRF systems for residential and commercial buildings in all five climate zones in China. In this work, the main findings are: (1) VRF systems are mainly used for cooling in all climate zones in China; (2) among all building types, the duration of use is lowest in residential buildings and highest in hotels and medical buildings; (3) the distribution of the ideal VRF cooling coefficient of performance (COP) is similar across all climate zones and building types; whereas the COPs of ideal VRF heating in the Severe Cold region and Cold regions are lower than those in other climate zones; and (4) partial load operations for VRF systems are common in residential buildings and office buildings due to the part-time-part-space operation mode. These findings can inform the actual application of VRF systems in China, supporting the design, operation, industry standard development, and performance optimization of VRF systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Potential impacts of Fukushima nuclear wastewater discharge on nutrient supply and greenhouse gas emissions of food systems

Seafood plays a critical role in promoting a nutritious and climate-friendly food system but faces challenges from marine contamination that pose food safety risks. Here, to address these challenges, we developed a Marine Pollution-induced Food System Risk Assessment and Response (MP-FSRAR) model to assess the impact of consumer perceptions of marine pollution risk events on nutrient supply and greenhouse gas (GHG) emissions. Applying this model to the proposed Fukushima Nuclear Wastewater Discharge (FNWD) into the Pacific Ocean, we identified the potential variation in nutrient supply and GHG emissions resulting from changes in Chinese consumers' willingness to consume seafood under 12 scenarios. Our analysis revealed nutrient supply gaps in daily protein, minerals, vitamins, and fatty acids, ranging from 1.5 to 2.7 g/person, 2.5–4.5 mg/person, 5.6–10.3 mcg/person, and 0.08–0.14 g/person, respectively. Closing the protein gap in China would require an additional 3.2–15.8 billion kg yr -1 protein-rich foods, including aquatic, livestock, dairy, and pulses. Additional food supply would increase extra GHG emissions by 1–79 billion kg CO 2 e yr -1 , resulting in potential GHG emissions being transmitted to other countries through the trade chain. Furthermore, we found that the livestock-based food substitution pathway had 40 times higher GHG emissions than the plant-based one. Our MP-FSRAR model provides global stakeholders with new perspectives on the potential consequences of consumer perceptions of marine pollution risks and offers valuable insights for developing countermeasures to build a more resilient and low-carbon food system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The water use of data center workloads: A review and assessment of key determinants

The global importance of data center water use is increasing with the rapid growth of digitalization and artificial intelligence. This study analyzes the factors influencing workload-level water use, measured in liters consumed per workload, to guide water-saving strategies in data centers. Our findings reveal workload-level water use variations exceeding 10,000-fold, driven by over 1000-fold differences in water consumption per kilowatt hour of server electricity consumed and approximately 10-fold differences in server workload efficiency. Key determinants are ranked as server efficiency, electrical grid water consumption factors, server utilization, cooling system type, infrastructure efficiency, climate zone, inactive server percentage, and server refresh cycle. Notably, there is no single recipe for minimizing water use; instead, optimal outcomes depend on tailored combinations of these factors. This analysis addresses critical knowledge gaps by identifying the determinants of data center water use and exploring their achievable minima under diverse site-specific constraints.

Data centers↗

Influences of nitrogen fertilization and climate regime on the above-ground biomass yields of miscanthus and switchgrass: A meta-analysis

Perennial grasses are touted as sustainable feedstocks for energy production. Such benefits, however, may be offset if excessive nitrogen (N) fertilization leads to economic and environmental issues. Moreover, as yields respond to changes in climate, nutrient requirements will change, and thus guidance on minimal N inputs is necessary to ensure sustainable bioenergy production. Here, a pairwise meta-analysis was conducted to investigate the effects of N fertilization (amount and duration) and climate on the above-ground biomass yields of miscanthus ( Miscanthus x giganteus ) and switchgrass ( Panicum virgatum L. ). Both regression models and meta-analyses showed that switchgrass was more responsive to N than miscanthus, although both showed significant and positive N effects. Meta-analysis further showed that the positive growth response of miscanthus to N application increased with N addition rates of 60–300 kg N ha -1 year -1 , but the magnitude of the response decreased with the number of years of fertilization (duration). N effects on switchgrass biomass increased and peaked at rates of 120–160 kg N ha -1 year -1 and 5–6 years of N inputs, but diminished for rates >300 kg N ha -1 year -1 and >7 years. Meta-analysis further revealed that the influences of N on switchgrass increased with both mean annual temperature and precipitation. Miscanthus yields were less responsive to climate than switchgrass yields. This meta-analysis helps fill a gap in estimation of biofeedstock yields based on N fertilization and could help better estimate minimum N requirements and soil management strategies for miscanthus and switchgrass cultivation across climatic conditions, thereby improving the efficiency and sustainability of bioenergy cropping systems.

09 BIOMASS FUELS↗

Crystal Growth of Quaternary RE 2 EuSi 2 S 8 ( RE = Ce–Nd, Sm, Gd, Tb) Using Flux-Assisted Boron Chalcogen Mixture (BCM) Method: Investigation of Magnetic and Luminescence Properties

A series of quaternary rare-earth containing thiosilicates with the general formula RE 2 EuSi 2 S 8 (RE = Ce–Nd, Sm, Gd, Tb) has been synthesized via the flux-assisted boron chalcogen mixture (BCM) crystal growth method. High-quality single crystals were obtained, and their crystal structures were determined by single-crystal X-ray diffraction. The RE 2 EuSi 2 S 8 series crystallizes in the trigonal system, adopting the space group R-3c. Polycrystalline samples were employed for physical property measurements, including magnetic susceptibility measurements, UV–visible diffuse reflectance, and photoluminescent response. Magnetic data of RE 2 EuSi 2 S 8 ( RE = Ce, Nd, and Gd) were collected over the 2–300 K temperature range. The samples were paramagnetic behavior with negative Weiss constants (θ W = −11.05, −10.55, and −1.35 K respectively). Their thermal stability was investigated using thermogravimetric analysis (TGA). Optical band gaps, estimated from diffuse reflectance spectra, were determined to be 2.2(1) eV for Ce 2 EuSi 2 S 8 , 1.8(1) eV for Nd 2 EuSi 2 S 8 , and 1.7(1) eV for Gd 2 EuSi 2 S 8 respectively. Finally, photoluminescence measurements were collected on Ce 2 EuSi 2 S 8 and Tb 2 EuSi 2 S 8 single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transformation of the Anion Sublattice in the Cation-Exchange Synthesis of Au 2 S from Cu 2– x S Nanocrystals

Cation exchange is a versatile postsynthetic technique that has been exploited in the synthesis of metastable nanocrystals through preservation of the anion sublattice. Here, we report on the mechanistic details of the synthesis of metastable Au 2 S via cation exchange with Cu 2– x S nanocrystals. This conversion requires a transformation of the anion sublattice, from hexagonal close-packed in Cu 2– x S to body-centered cubic in Au 2 S, accompanied by an expansion of the unit cell. The ligand environment plays a key role in the driving force of the reaction as the presence of oleylamine allows the conversion to proceed at room temperature, whereas the addition of trioctylphosphine hinders the reaction. By employing transmission electron microscopy (TEM) on faceted nanocrystals and partial cation exchange of nanocrystals, it was demonstrated that the reaction proceeds in a highly directional manner through the pyramidal facets. Since cation exchange produces high-quality nanocrystals as seen through X-ray diffraction and TEM, UV–vis and Raman spectroscopy were used to characterize the optoelectronic properties of the metastable Au 2 S nanocrsytals. A Tauc plot analysis revealed a band gap of 2.6 eV, whereas two intrinsic Raman modes were identified at 265 and 329 cm –1 . Density functional theory calculations of structures, energy bands, optical spectra, and phonon spectra were performed and combined with the experimental data to provide additional insights into the characterization of Au 2 S nanocrystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flux-Assisted Boron Chalcogen Mixture (BCM) Method for Synthesizing Mixed Chalcogenide Semiconductors (AkRE 2 Si 2 Se x S 8– x and CaRE 2 Si 2 Se 8 ) ( Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm): Investigation of Their Magnetic and Optical Properties

We report a detailed structural analysis of a series of ten quaternary rare-earth-containing seleno-thiosilicates AkRE 2 Si 2 Se x S 8-x and selenosilicates, CaRE 2 Si 2 Se 8 (Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm). Single crystals were obtained by using the flux-assisted boron chalcogen mixture (BCM) method and single crystal X-ray diffraction was used to determine their structures. All members of the AkRE 2 Si 2 Se x S 8-x and CaRE 2 Si 2 Se 8 series crystallize in the space group R$\bar{3}$c (space group number 167) of the trigonal crystal system. The single-crystal X-ray diffraction analysis revealed a strong preference for Se/S atoms to occupy one vs. the other of the two available sites. Polycrystalline samples were used for magnetic susceptibility and UV–visible diffuse reflectance measurements. Magnetic measurements show that CaCe₂Si₂Se₁.₇₃S₆.₂₇ and CaNd₂Si₂Se₂.₅S₅.₅ are paramagnetic with negative Weiss constants (θ = –60.1 and –26.2). Diffuse reflectance analysis gives optical band gaps of 2.7(1) eV (CaLa₂Si₂Se₂.₃₈S₅.₆₂), 2.2(1) eV (CaCe₂Si₂Se₁.₇₃S₆.₂₇), 2.5(1) eV (CaNd₂Si₂Se₂.₅S₅.₅), and 2.0(1) eV (CaCe₂Si₂Se₈), consistent with density functional theory calculations. By partially or fully replacing S sites with Se it was possible to achieve band gap tuning. Photoluminescence behavior was also investigated for CaCe 2 Si 2 Se 1.73 S 6.27 via irradiation with 375 nm ultraviolet light.

BCM method↗

OmicsMLMentor: A Web Application for Guided Machine Learning Analysis of Omics Data

Expression-based omics technologies (e.g. proteomics, metabolomics, transcriptomics, etc.) increasingly rely on supervised and unsupervised machine learning (ML) models to find key biomolecules distinguishing conditions, identify natural groupings in biological data, or generate predictions for outcomes of interest. Fitting ML models to omics data presents several challenges, including handling missing data, selecting a normalization method, choosing a valid model, and optimizing hyperparameters, all requiring statistical programming skills to address these challenges. Thus, the open-source web application SLOPE was designed to lower the barrier to ML modeling for omics data. SLOPE supports the fitting of 15 ML models (10 supervised and 5 unsupervised) tailored to omics datasets, such as proteomics, metabolomics, lipidomics, and transcriptomics. SLOPE offers several omics-specific features, including methods for handling missingness (imputation, conversion, removal), normalization tests, ranking of models based on the structure of a user’s data and user input, and optimal hyperparameter selections using cross-validation splits. By streamlining ML workflows for omics analysis, SLOPE address critical gaps in existing online web tools, facilitating a broader adoption of these models for omics research. Here, SLOPE is applied to data from a lignin exposure study to highlight the workflow for fitting both supervised and unsupervised models to data.

lipidomics↗

Coexisting kagome and heavy fermion flat bands in YbCr 6 Ge 6

Flat bands, electronic states with nearly dispersionless energy-momentum structure, provide fertile ground for unconventional quantum phases. Recent observations of flat bands at the Fermi level in kagome metals open the possibility of unifying topology and correlation-driven heavy-fermion physics. Here we show that topology and heavy-fermion correlations coexist in the layered kagome metal YbCr 6 Ge 6 . At high temperatures, an intrinsic kagome flat band—arising from frustrated hopping on the kagome lattice—dominates the Fermi level. Upon cooling, localized Yb 4f-states hybridize with the topological kagome flat bands, transforming this state into momentum-independent Kondo resonance states across the entire Brillouin zone. Topological analysis of the hybridization gaps reveals filling-tunable weak and strong topological Kondo-insulating regimes, and identifies a topological Dirac–Kondo semimetal. Taken together, these results identify YbCr 6 Ge 6 as a prototype of a topological heavy-fermion system and a platform where geometric frustration, strong correlations, and topology converge, with broad implications for correlated quantum matter.

36 MATERIALS SCIENCE↗

Integrating Materials, Manufacturing, Design and Validation for Sustainability in Future Transport Systems

The predictive methods currently used for material specification, component design and the development of manufacturing processes, need to evolve beyond the current 'metal centric' state of the art, if advanced composites are to realise their potential in delivering sustainable transport solutions. There are however, significant technical challenges associated with this process. Deteriorating environmental, political, economic and social conditions across the globe have resulted in unprecedented pressures to improve the operational efficiency of the manufacturing sector generally and to change perceptions regarding the environmental credentials of transport systems in particular. There is a need to apply new technologies and develop new capabilities to ensure commercial sustainability in the face of twenty first century economic and climatic conditions as well as transport market demands. A major technology gap exists between design, analysis and manufacturing processes in both the OEMs, and the smaller companies that make up the SME based supply chain. As regulatory requirements align with environmental needs, manufacturers are increasingly responsible for the broader lifecycle aspects of vehicle performance. These include not only manufacture and supply but disposal and re-use or re-cycling. In order to make advances in the reduction of emissions coupled with improved economic efficiency through the provision of advanced lightweight vehicles, four key challenges are identified as follows: Material systems, Manufacturing systems, Integrated design methods using digital manufacturing tools and Validation systems. This paper presents a project which has been designed to address these four key issues, using at its core, a digital framework for the creation and management of key parameters related to the lifecycle performance of thermoplastic composite parts and structures. It aims to provide capability for the proposition, definition, evaluation and demonstration of advanced lightweight structures for new generation vehicles in the context of whole life performance parameters.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DFT investigation on the electronic structure of Faujasite

We report here first-principle pseudopotential DFT calculations to investigate relevant aspects of the electronic structure of zeolites based FAU. Fundamental molecular issues of the band-gap and electronic population analysis were reviewed under GGA/RPBE level of theory, corroborated with a DZP basis set and Troullier-Martins norm conserving pseudo-potentials. The atom-projected density of states and the analysis of HOMO-LUMO frontier orbitals at Gamma point were performed. Their electronic transfers are discussed through the alignment and relative positions of orbitals in order to determine the way that the molecule interacts with adsorbed molecules and other practical applications. Mulliken population analysis was employed for describing atomic charge distribution in the chosen systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optoelectronic and low temperature thermoelectric studies on nanostructured thin films of silver gallium selenide

Polycrystalline thin films of silver gallium selenide were deposited on ultrasonically cleaned soda lime glass substrates by multi-source vacuum co-evaporation technique. The structural analysis done by X-ray diffraction ascertained the formation of nano structured tetragonal chalcopyrite thin films. The compound formation was confirmed by X-ray photo-electron spectroscopy. Atomic force microscopic technique has been used for surface morphological analysis. Direct allowed band gap ∼1.78eV with high absorption coefficient ∼10{sup 6}/m was estimated from absorbance spectra. Low temperature thermoelectric effects has been investigated in the temperature range 80–330K which manifested an unusual increase in Seebeck coefficient with negligible phonon drag toward the very low and room temperature regime. The electrical resistivity of these n-type films was assessed to be ∼2.6Ωm and the films showed good photo response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A detailed analysis of the energy levels configuration existing in the band gap of supersaturated silicon with titanium for photovoltaic applications

The energy levels created in supersaturated n-type silicon substrates with titanium implantation in the attempt to create an intermediate band in their band-gap are studied in detail. Two titanium ion implantation doses (10{sup 13 }cm{sup -2} and 10{sup 14 }cm{sup -2}) are studied in this work by conductance transient technique and admittance spectroscopy. Conductance transients have been measured at temperatures of around 100 K. The particular shape of these transients is due to the formation of energy barriers in the conduction band, as a consequence of the band-gap narrowing induced by the high titanium concentration. Moreover, stationary admittance spectroscopy results suggest the existence of different energy level configuration, depending on the local titanium concentration. A continuum energy level band is formed when titanium concentration is over the Mott limit. On the other hand, when titanium concentration is lower than the Mott limit, but much higher than the donor impurity density, a quasi-continuum energy level distribution appears. Finally, a single deep center appears for low titanium concentration. At the n-type substrate, the experimental results obtained by means of thermal admittance spectroscopy at high reverse bias reveal the presence of single levels located at around E{sub c}-425 and E{sub c}-275 meV for implantation doses of 10{sup 13 }cm{sup −2} and 10{sup 14 }cm{sup −2}, respectively. At low reverse bias voltage, quasi-continuously distributed energy levels between the minimum of the conduction bands, E{sub c} and E{sub c}-450 meV, are obtained for both doses. Conductance transients detected at low temperatures reveal that the high impurity concentration induces a band gap narrowing which leads to the formation of a barrier in the conduction band. Besides, the relationship between the activation energy and the capture cross section values of all the energy levels fits very well to the Meyer-Neldel rule. As it is known, the Meyer-Neldel rule typically appears in processes involving multiple excitations, like carrier capture and emission in deep levels, and it is generally observed in disordered systems. The obtained Meyer-Neldel energy value, 15.19 meV, is very close to the value obtained in multicrystalline silicon samples contaminated with iron (13.65 meV), meaning that this energy value could be associated to the phonons energy in this kind of substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗