Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometric”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Dynamic response analysis of geometrically non-linear structures subjected to high impact.

Description of an efficient digital computer method for the determination of the propagation of elastic stresses and deformations in certain geometrically nonlinear structures subjected to high impact loading. The finite-element matrix displacement approach utilizing curved quadrilateral shell elements in conjunction with a nodewise predictor-corrector method employing Runge-Kutta extrapolation techniques has been adopted for the present solution. The related computer program written in FORTRAN V for the UNIVAC 1108 computer has proved to be effective for the solution of a range of practical problems including rectangular and cylindrical panels. Numerical results are presented for a relevant structure, the cell container, and the negative electrode of an impact-resistant battery subjected to high impact, simulating its free landing on a planetary surface.

Gupta, K. K.↗
NASA NTRS1972

Study of the dynamics of orbital assemblies including interactions with geometrical appendages

Computer programs are provided for the simulation of a unified flexible spacecraft relative to the dynamics of orbital assemblies, including interactions with geometrical appendages. The CDC 6500 and Univac 1108 computers are used with FORTRAN. The software and hardware requirements are described and diagrammed, as well as the overall deck set-up. A list of standard and nonstandard routines is also included.

Hull, G.↗
NASA NTRS1972

The Ohio State University Geometric and Orbital (adjustment) Program (OSUGOP) for satellite observations

A computer program, OSUGOP, developed for adjusting ground station coordinates from observations made to satellites by stations observing from the ground is outlined. The observations can be optical or ranges, and the adjustments can be performed in either the geometric or orbital mode. The program was developed in such a way that certain specific tasks can be performed without resorting to a complete solution.

Reilly, J. R.↗
NASA NTRS1973

Determination of the geometrical factor and of the spatial distributions of particles for a cosmic ray telescope using a Monte Carlo approach

A program is presented which uses a Monte Carlo technique to compute the geometrical factor of a detector, and the spatial and angular distributions of simulated particles at designated layers within the detector. As the program is written, each layer is assumed to be rectangular, parallel to every other layer with its edges parallel to the edges of every other layer, and centered about a common axis. This program is written in Fortran 4 for the IBM 360 computers and is currently being run under the Fortran 4 (h) compiler. Same features such as the subroutine ERRSET, RANDU, and REMTIM and the type declarations REAL *8 and LOGICAL *1 may need to be changed for use with a different computer system. The use of input data cards, and a sample data set are presented. Lists of the symbol definition, card images of the FORTRAN object deck and subroutines are included along with a flow diagram.

Hemmer, M.↗
NASA NTRS1973

Geometric aspects in digital analysis of Multi-Spectral Scanner (MSS) data

Present automated systems of interpretation which apply pattern recognition techniques on MSS data do not fully consider the geometry of the acquisition system. In an effort to improve the usefulness of the MSS data when digitally treated, geometric aspects are analyzed and discussed. Attempts to correct for scanner instabilities in position and orientation by affine and polynomial transformations, as well as by modified collinearity equations are described. Methods of accounting for panoramic and relief effects are also discussed. It is anticipated that reliable area as well as position determinations can be accomplished during the process of automatic interpretation. A concept for a unified approach to the treatment of remote sensing data, both metric and nonmetric is presented.

Mikhail, E. M.↗
NASA NTRS1973

A geometric theory for the QR, LU and power iterations.

Consideration of the task of computing the invariant subspaces of a given matrix. For this purpose the LU, QR, treppen and bi-iterations have been presented, used, and studied more or less independently of the old-fashioned power method. Each of these methods generates implicitly a sequence of subspaces which determines the convergence properties of the method. The iterations differ in the way in which a basis is constructed to represent each subspace. This aspect largely determines the usefulness of the method. It is shown that the first four iterations produce exactly the same sequence of subspaces as do direct and inverse iteration started from appropriate subspaces. Their convergence properties are therefore the same, and a complete geometric convergence theory is presented in terms of the power method. It is shown that Hessenberg matrices are associated with ideal starting spaces.

Parlett, B. N.↗
NASA NTRS1972

Static geometric and material nonlinear analysis.

This paper presents a survey of four aspects of nonlinear analysis - basic formulation, plasticity relations, computational procedures, and methods of solution. This survey is for the most part limited to static geometric and material nonlinear analysis under the assumption of small strains. The two formulations covered are the total Lagrangian and the incremental moving coordinate formulations. A comparison of the two formulations is presented and an attempt is made to clarify the underlying basis of each formulation. The survey of computational procedures reveals that most researchers are now using some form of numerical integration to evaluate nonlinear contributions.

Stricklin, J. A.↗
NASA NTRS1974

Jet noise from co-axial nozzles over a wide range of geometric and flow parameters

Free field pure jet noise data were taken for a large range of coaxial nozzle configurations. The core nozzles were circular (1 to 4 in. diameter) and plug types. The fan to core area ratio varied from 0.7 to 43.5, while the velocity ratio typically varied from 0 to 1. For most cases the two nozzles were coplanar but large axial extensions of either nozzle were also tested. Correlation of the data resulted in a simple procedure for estimating ambient temperature subsonic coaxial jet noise spectra over a wide range of geometric and flow parameters.

Olsen, W.↗
NASA NTRS1974

Effect of geometrical and flow parameters on high-effectiveness region of film cooling

Previous analyses for an inviscid jet injected into a stream and the turbulent mixing region which forms between jet and stream are used to find the extent of the core region in a cooling film by calculating the growth of the turbulent boundary layer on the downstream wall. The core is a region of nearly perfect effectiveness which ends at the intersection of the boundary layer and the mixing region. The calculations show that the most important geometrical factor bearing on the length of the core is the curvature of the wall. When the radius of curvature is large, the boundary layer remains thin and the core is long. The effects of Reynolds number, total-pressure difference between film and stream, and lateral position of the downstream wall are also investigated. The step configuration is shown to have a longer core than the slot for the same flow conditions.

Braum, W. H.↗
NASA NTRS1974

Jet noise from coaxial nozzles over a wide range of geometric and flow parameters

Free field pure jet noise data were taken for a large range of coaxial nozzle configurations. The core nozzles were circular (1 to 4 in. diam.) and plug types. The fan to core area ratio varied from 0.7 to 43.5, while the velocity ratio typically varied from 0 to 1. For most cases the two nozzles were coplanar but large axial extensions of either nozzle were also tested. Correlation of the data resulted in a simple procedure for estimating ambient temperature subsonic coaxial jet noise spectra over a wide range of geometric and flow parameters.

Olsen, W.↗
NASA NTRS1975

Spline function approximation techniques for image geometric distortion representation

Least squares approximation techniques were developed for use in computer aided correction of spatial image distortions for registration of multitemporal remote sensor imagery. Polynomials were first used to define image distortion over the entire two dimensional image space. Spline functions were then investigated to determine if the combination of lower order polynomials could approximate a higher order distortion with less computational difficulty. Algorithms for generating approximating functions were developed and applied to the description of image distortion in aircraft multispectral scanner imagery. Other applications of the techniques were suggested for earth resources data processing areas other than geometric distortion representation.

Anuta, P. E.↗
NASA NTRS1974

Ejecta from large craters on the moon - Comments on the geometric model of McGetchin et al

Amendments to a quantitative scheme developed by T. R. McGetchin et al. (1973) for predicting the distribution of ejecta from lunar basins yield substantially thicker estimates of ejecta, deposited at the basin rim-crest and at varying ranges beyond, than does the original model. Estimates of the total volume of material ejected from a basin, illustrated by Imbrium, also are much greater. Because many uncertainties affect any geometric model developed primarily from terrestrial analogs of lunar craters, predictions of ejecta thickness and volume on the moon may range within at least an order of magnitude. These problems are exemplified by the variability of T, thickness of ejecta at the rim-crest of terrestrial experimental craters. The proportion of T to crater rim-height depends critically upon scaled depth-of-burst and whether the explosive is nuclear or chemical.

Pike, R. J.↗
NASA NTRS1975

Optimal source codes for geometrically distributed integer alphabets

An approach is shown for using the Huffman algorithm indirectly to prove the optimality of a code for an infinite alphabet if an estimate concerning the nature of the code can be made. Attention is given to nonnegative integers with a geometric probability assignment. The particular distribution considered arises in run-length coding and in encoding protocol information in data networks. Questions of redundancy of the optimal code are also investigated.

Gallager, R. G.↗
NASA NTRS1974

Free geometric adjustment of the OSU/NGSP global network /solution WN-4/

The paper presents the results of the OSU WN 4 geometric adjustment for the coordinates of 152 satellite tracking stations. The results, when referred to the WN 4 ellipsoid of a = 6,378,127.8 m and 1/f = 298.25 produce geoid undulations consistent with dynamically determined ones. The average standard deviation in a Cartesian coordinate is plus or minus 4.0 m; in height, plus or minus 2.7 m. Comparisons with coordinates obtained from dynamic solutions show significant inconsistencies in the orientation of the coordinate systems.

Mueller, I. I.↗
NASA NTRS1976

A general geometric theory of attitude determination from directional sensing

A general geometric theory of spacecraft attitude determination from external reference direction sensors was presented. Outputs of different sensors are reduced to two kinds of basic directional measurements. Errors in these measurement equations are studied in detail. The partial derivatives of measurements with respect to the spacecraft orbit, the spacecraft attitude, and the error parameters form the basis for all orbit and attitude determination schemes and error analysis programs and are presented in a series of tables. The question of attitude observability is studied with the introduction of a graphical construction which provides a great deal of physical insight. The result is applied to the attitude observability of the IMP-8 spacecraft.

Fang, B. T.↗
NASA NTRS1975

Comparison of geometrical effects in radio and stellar occultations

An important difference between the radio and stellar occultation techniques for probing planetary atmospheres is that a crucial equation relating refraction angle with ray impact parameter is solved in opposite directions in the two techniques. The solution is tolerant of small geometrical errors for stellar occultations but, unfortunately, not for radio occultations.

Hubbard, W. B.↗